error at startup SPIRunE.dll

Similar Questions

• I get this error at startup: mozupdate.dll missing. What should I do

  mozupdate.dll error at startup
  I installed a new copy of firefox and the problem remains.

  Hello

  Please see this.

• RunDLL error on startup logmconf.dll

  RunDLL error logmconf.dll

  How can I fix this so the error shows up again. I think my antivirus has detected this and removed because it was a Trojan horse. But there is a warning error that keeps popping up when I start my computer... the computer works Ok, but it's boring and I already have 3 errors of the same kind.

  Hello
   
   
  1. could you give us the exact error message?

  It seems that this file has been associated with an application, I recommend you to check if the problem occurs in safe mode. We can find the program that is associated with performing the clean boot.

  Step 1. Please check if you are facing the same question when working in safe mode.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7. When Windows starts and check if the problem still persists.

  For additional information see the articles below.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
   
  Step 2.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• error at startup: WBHelp2.dll is missing and cannot continue skinning.

  At startup. I get a msg saying: WBHelp2.dll is missing and cannot continue skinning.

  Hello

  You have installed Stardock's WindowBlinds? You need to maybe reinstall or remove it completely
  your startup.

  Stores - Stadock
  http://www.stardock.com/products/WindowBlinds/

  If you want to completely remove a good method would be to re - install and then use Revo to
  uninstall it.

  Revo Uninstaller - free
  http://www.revouninstaller.com/

  --------------------------------------------------------

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all.
  reporting of any window created by running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Kareware
  http://www.KarenWare.com/

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Hi people! When I try to launch of BF3, I get this error on startup - d3dcompiler_43.dll missing, why?

  The product name and number:

  HP Pavilion DV7-6151

  OPERATING SYSTEM:

  Windows 7, 64-bit

  Error message:

  When I try to run Battlefield 3, I get this error d3dcompiler_43.dll is missing, someone knows what to do?

  I bought the laptop 4 days ago, and I got no change is, its costs of the plant.

  I hope you can help me

  Hello

  On the CD of BF3, there should be a folder called DirectX. To reinstall directX runtime files.

  Otherwise, you can get it here

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en?WT.mc_id=MSCOM_DLC_US_DR_111SXX02959

• Error on startup - "Run DLL there was a problem starting C:\PROGRA~2\jb4of4.dss. Access is denied. »

  Original title - DLL execution

  Hello

  I get the following message is displayed at the start of Windows 7:
  Run the DLL THAT there was a problem from C:\PROGRA~2\jb4of4.dss.  Access is denied.
  Can anyone help with this?  What should I do?
  Kind regards
  A

  Hello once again, this problem seems to have disappeared.  It was not caused by a new software or equipment and I had not changed anything with the system.  I did nothing to try to resolve the problem and he started just before I asked for help.  I have no idea what jb4of4.dss is or could be- or if she is still there.

  I do a Windows update yesterday, but I thought that the problem was still there after that.  However, today the error message did not appear.
  Thanks a lot to BossDweebe and XP ROCKS! to show interest to help him.
  Kind regards
  AntVH

• my computer keeps showing an error at startup:-run DLL error in c:\window\system32\nvcpl.dll.

  He said entry missing: NV STARTUP, any idea of please, not very irritable

  Peter

  Hello

  You will have to perhaps to reinstall or update the Nvidia video driver because it is the control program for it.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  ===========================================================================

  To correct it as a startup problem:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

  I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

  Hello
  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  Methods of resolution:
   
  I suggest you to download windows desktop search for additional and install.

   
  http://support.Microsoft.com/kb/940157

• I get dll error at startup messages, slow down my computer. Files that cannot be found are buzixu.dll and grfamsg.dll

  Files that cannot be found are buzixu.dll and grfamsg.dll. The operating system is vista.

  Thank you.

  * original title - Hi, I get dll error at startup messages, slow down my computer.  Does anyone have ideas how they could be fixed. Thank you very much.*

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, Autoruns for Windows, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• xxyyvs.dll error at startup

  I get an "error loading xxyyvs.dll", RunDLL error on startup. Run my anti-virus does not help. Any ideas would be greatly appreciated.

  http://www.google.com.au/search?hl=en&source=HP&q=xxyyvs.dll&aq=f&aqi=&AQL=&OQ=&gs_rfai=

  Read about the Google hits above.

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• several errors at startup related to the file missing error rasman.dll

  several errors at startup related to the file missing error rasman.dll

  Hello

  1 did you changes to the computer before the show?
  2. What is the exact error message or error code?

  I suggest you perform the clean boot and check if that helps you.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135 
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.

  It will be useful.

• Receiving an error on startup error: C:\Program Data\sytem 32\gameux.dll is not designed to run on Windows or it contains an error

  * Original title: error gameux.dll

  I recently got an error on startup associated gameux.dll.

  "C:\Program Data\...\gameux.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or your system administrator or the software vendor for support on the contracts. »

  Later, I discovered that my Norton 360 had quarantined the gameux.dll file a few weeks ago marked as high risk Trojan horse.  After scanning this file in the folder of Norton 40, it seems, is not a problem and was not actually a virus.  Then I looked in the windows System 32 folder and found that the file gameux.dll is actually still there.  Maybe repeuple Windows there.  Unfortunately, it doesn't seem to work.  Maybe an incompatible version.

  I tried to put the old file in System 32, but ran into problems of owner "TrustedInstaller", which I didn't change without a little guidance.

  Any ideas where I should go from here?

  Thank you!

  Dell Precision T1500

  Windows 7, 64-bit

  I don't know if you saw my post updated, but I'm sure that this question arises from Norton 360 brand gameux.dll file as a virus.  It quarantined the file.  Apparently repeuple Windows the Windows\System32 folder with a new file gameux.dll

  I think that some programs may have been pointing to the old file gameux.dll quarantined.  Norton, he was put in a hidden folder in c:\programdata.

  In any case, I deleted this version put in quarantine to gameux.dll and problem solved.  No more error on startup!

• \3\dlbtime.dll error at startup

  Windows 7 64-bit PC

  I get the error \3\dlbtime.dll error message when you start upward. I can close the error message and the computer with no problems, but I would like to get rid of this message.

  - Http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/windows-startup-rundll-error-3dlbttimedll/6da650e4-56f3-4085-9cd5-5bbcef302392 is an old post of VISTA (with a T in the report - typo?), but you have a DELL printer? If so good reading and see if it gives indications. See also - http://www.bleepingcomputer.com/startups/DLBTtime.dll-20767.html

  
  

  
  

  Or by post with any additional information, the error message is accurate and complete (if there is more than that)

• LogiLDA.dll module not found error at startup.

  Original title: RunDLL error on startup?

  When a journal on my laptop, I see a weird RunDLL dialog box that says:

  There was a problem starting C:\Windows\System32\LogiLDA.dll

  The specified module could not be found.

  That this has something to do with my laptop, or a program?

  I've never noticed something wrong with my laptop lately, just this stupid dialogue box every time you start...

  I have a TOSHIBA laptop with windows 8 on it.

  Hi Ian,

  Please contact Logitech technical support for help in the installation of the Logitech Download Assistant.

   

  http://Logitech-en-AP.custhelp.com/app/answers/detail/A_ID/32423/tabs/ * / cl /, en

  If you have other questions about Windows operating systems, please contact us on this forum. We are happy to help you.

• DLL could not be opened error at startup.

  Whenever I boot, I get an error message - he says DLL could not be opened.  Anyone know how what it is or how to get rid of?

  Hello

  Try the methods below and check if that helps:

  Method 1:

  Safe mode:

  Follow the link mentioned below steps to start the system in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If you are not facing problems in safe mode, and then try Method 2:

  Method 2:

  Clean boot:

  http://support.Microsoft.com/kb/929135

  (Note: follow step-7 since the link above to start in normal mode.)

  Hope the helps of information.