Error C:\windows\swmsmca.dll

When starting my laptop I get this error code - error C:\windows\swmsmca.dll---j'ai ran all kinds of different things to try to fix this issue and it always keeps popping up. Anyone has any ideas on what to do?

It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.
I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
Here are the detailed instructions that protect you and solve your problem in the 'right' way.
There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
Here is a link to a popular registry backup tool:
You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
Scroll through the list and look for a boot entry associated files in the error message.
If you can't find on the connection tab, look in any tab.
Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry
.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
Given that you had or have an infection, followed with this:
Perform scans for malware, and then fix any problems:
Download, install, update and do a full scan with these free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
They can be uninstalled later if you wish.
Restart your computer and solve the outstanding issues.

Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony! Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Tags: Windows

Similar Questions

  • What does say, load error, c\windows\otibhct4.dll?

    everytime I open my computer a Rundll message appears error loading C\WINDOWS\otibhct4.dll.  Is this something that I need to fix and how do I solve this problem?

    It is always sensible in this situation to achieve a malware check

    Download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

    http://www.Malwarebytes.org/

    Download and run SuperAntiSpyware (Free Edition)

    http://www.SUPERAntiSpyware.com/download.html

  • Start Windows XP problem, error: C:Windows\ecsdlp.dll the specified module could not be found.

    original title:. Error loading windows

    Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

    Under XP. Error loading of windows C:Windows\ecsdlp.dll the specified module could not be found. Ditto for C:\Windows\udehukoziye.dll. Ideas?

    Your computer was (and still may be) infected with the malware.  Error messages such as those that you have the result when your anti-malware application deletes the active part of the malicious program but fails to remove the entry from the Windows registry used to start the malicious software.

    First of all, download, install, update and scan with these two free utilities:
    MalwareBytes Anti-Malware
    SUPERAntiSpyware

    If after the scans have completed and you have removed a malware that has been found, you get the error messages on a restart, download, install and run Autoruns.  Once the scan is complete Autoruns (bottom left), click the 'Connection' tab and find the names of two files in your error messages (ecsdlp.dll and udehukoziye.dll).  If found, uncheck the box at the left end of the line (you can delete the entry, but this action is not reversible).  If you can't find the name of the file in the connection tab, click the "all" tab, use file > search to find them.

    Once the entries with incorrect file names have been deleted or not, you will get errors at startup upward.

  • RUNDLL error C:\WINDOWS\dfgwovap.dll the specific module could not be found.

    Original title: RUNDLL error

    has anyone seen a RUNDLL error

    C:\WINDOWS\dfgwovap.dll

    the specific module could not be found.

    Since this jumped on my computer, I can run is more my outlook program.  I opened for 1 second and then closes.  I reinstalled a couple of times and the same thing happens.

    all thoughts

    Thank you

    Jon

    Hi Jon,

    1. don't you make changes before the show?

    Try these steps and check the result.
    Step 1: Check if a non-Microsoft program is causing this issue
    see How to configure Windows XP to start in a "clean boot" State .
    b. If the issue is not persistent, then from the article, follow the method 1 and method 2 to find out if any program is causing the problem.
    c. Once you have found the culprit which is the program that is causing the problem, then uninstall it or reinstall once more to solve the problem.

    Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

    Step 2: If the problem continues, check if a system file is missing or damaged
    a. Click Start, click Run, type cmd and click ok.
    b. at the command prompt, type sfc/scannow and press ENTER.

    Note: You will be asked to insert the Windows XP disk, if a file is missing.

    For more information, see Description of Windows XP System File Checker (Sfc.exe)

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error loading windows: msvex2.dll cannot be found

    My computer has been infected by the Virus think Point. I ran Malware Anti-Malware bytes and followed these instructions

    http://www.precisesecurity.com/rogue/think-point/

    When I load windows now it says Error loading c:\\windows\msvex2.dll specified module cannot be found.
    I was able to download and install the latest service pack and it worked but windows keeps freezing and try to update AVG Free has given me a blue error screen.

    Anyone has any experience with this problem and know how to fix?

    Please see when I connect to my PC, I see a ThinkPoint window in this forum.

    If this does not resolve the problem, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

    For more information about how to use the Autoruns, please see:

    Autoruns for Windows Windows Sysinternals Autoruns Forum

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Error: c:\WINDOWS\iZCNEX.dll to restart the system

    Original title: c:\WINDOWS\iZCNEX.dll

    The following error message occurs when I restart my computer.  Error loading c:\WINDOWS\iZCNEX.dll.  Access is denied.

    Help, please

    Ali

    Hi Ali,

    ·         You did recently changes to your computer?

    Try the following steps to limit the problem.

    Step 1

    Check if the problem occurs in safe mode.
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    If you are able to boot into safe mode, then try step 2.

    Step 2

    Put your computer to boot in order to check software conflicts. Try step 1 of article proposed below and restart your computer in normal mode.
    http://support.Microsoft.com/kb/929135

    Bindu R - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When I turn on my computer I get errors on Windows Update.dll and Conduit update\conduitupdt32.dll profile

    It is full error:

    1. C:\Documents and Settings\All Users Application Profile Update.dll load error.  The specified module could not be found.

    2 error loading C:\Documents and Settings\Application Data\Conduit Update\Conduitupdt32.dll HP_Owner.  The specified module could not be found.

    I use Windows XP Home Edition for my OS.

    Thank you.

    Check if the files are in the default location of C:\windows\system32\ProfileUpdate.dll.

    You can also try to re - register the .dll file.
    Go to start/run.
    Then type regsvr32 Windows profile Update.dll.

    Must return, command has completed successfully.

    Ditto for the conduitupdt32.dll.

    Let us know if that helps.

    Marilyn

  • Error loading windows\drsqces.dll

    How can I fix this problem?

    System Restore does not help.

    Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
    http://www.precisesecurity.com/how-to/HT-smodewnet.htm
    http://www.Malwarebytes.org/products/malwarebytes_free

    Download and run SuperAntiSpyware (Free Edition)
    http://www.SUPERAntiSpyware.com/download.html

    Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
    http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

    Currently, this is a good combination that seems to detect more malware, but it can miss the malware as all security software can do.

  • WINDOWS/svmsinf.dll rundll error message

    I have two rundll errors: C:\WINDOWS\svmsinf.dll and C:\WINDOWS\emibegukop.dll.  How to fix them or get rid of them?

    Thank you.

    Please visit the following link - http://www.delete-computer-history.com/rundll-error.html. It will help you to correct any error rundll.
    On the link above, start with step 2, step 1 is not so important and won't give you useful information.

    It may be useful

  • Error loading C:\windows\iambcex.dll error codes

    Original title: error codes
    On my pc, I have not been able to obtain the nywhere.  When I open windows I get two error messages:
    Error loading C:\windows\iambcex.dll
    Error loading C:\windows\iyigexindoduse.dll

    A google search produces no results. This suggests that the relics of an incompletely removed malware or malicious software.

    It is always sensible in this situation to achieve a malware check

    Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
    http://www.precisesecurity.com/how-to/HT-smodewnet.htm
    http://www.Malwarebytes.org/products/malwarebytes_free
    Download and run SuperAntiSpyware (Free Edition)
    http://www.SUPERAntiSpyware.com/download.html

    To identify what loads when you start using Autoruns (freeware from Microsoft).
    http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

    With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
    Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

  • Whenever I reboot I get the following message: error loading C:\windows\claprv.dll

    Whenever I reboot I get the following message:

    Error loading C:\windows\claprv.dll

    the specified module could not be found

    What does that mean?  The only thing that I found online, it is that it can be associated with some malware?

    Any ideas?

    Hello, Rojo97,

    You have something to do with skiing?  This site uses claprv.htm.  You will get a 404 error page not found but the site is active.

    http://www.Sloski.SI/resources/files/PDF/alpsko-smucanje/04-05/FIS/alp_claprv.htm

    Have you added new software to your system recently?

    Download Microsoft malicious software removal tool run a complete analysis

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  • error windows\ebodemaw.dll

    After starting I get errorloadingc:\windows\ebodemaw.dll

    Hello

    This looks like remaining associated malware (probably Trojan.Hiloti variant) in the run key of your registry charged through rundll32.exe
    You can manually disable it via msconfig > Startup tab. In the list, you should find a reference pointing to the ebodemaw.dll file. The displayname property is also random. Just uncheck that one, so there will be no more startup with windows.
    Or you can delete this value in the registry under the HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run key. Normally, it should be there - otherwise, it is under the HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Run key, but since I suspect a Variant Hiloti rest here, it should be under HKLM.

    But I suggest instead of using msconfig here rather as tinkering with the registry is always a risk.

    What in any event, the actual file (ebodemaw.dll) is already gone, otherwise you would not get this error after startup. So it's just an orphan entry in the registry causes the error.

    I hope this helps.

  • Error: C:\windows\system32\spool\drivers\w32x86\dlcjtime.dll

    After update my PC with the latest patches I started getting the following error message every time I reboot:

    Error: C:\windows\system32\spool\drivers\w32x86\dlcjtime.dll
    Entry: rundllentry

    I know it has to do with my Dell printer and I have uninstalled and reinstalled the printer, but keep getting the same error message. What is the cause and how to fix?

    Hello

    See this message from Dell - even if the models are different ago probably similar
    problems with your computer and your printer. http://support.Dell.com//support/topics/global.aspx/support/DSN/en/document?c=JM&DL=false&l=en&s=Gen&docid=28E393B4B4A5ADEEE040A68F5B2849AA&doclang=en&CS

    Check with Support from Dell and their forums.

    Dell support
    http://support.Dell.com/

    Dell forums
    http://en.community.Dell.com/forums/
    ------------------------------------------------

    These could help however check with 1 Dell.

    What is rundll32.exe and why it works?
    http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

    What is the suspicious Rundll32.exe process?
    http://WindowsXP.MVPs.org/Rundll32.htm

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

    Original title: Windows Rundll error on startup

    My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

    What is a rundll error?

    File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

    Why do you Rundll errors?

    Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

    STEP 1: IDENTIFY

    The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

    STEP 2: STOP THE PROCESS

    Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
    1. open your Start menu.
    2. click on run
    3. in the command screen type:services.msc
    4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
    5.stop the "dll" service immediately.

    NOTE: sometimes the dll process can not be stopped by this method.

    STEP 3: CHECK FOR AND REMOVE

    You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

    This action will help you speed up the considerable load time of your applications. Here's how:

    1. click on Start
    2. click on run
    3. type regedit
    4. find this registry key:
    HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

    5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
    6. delete the value and reboot.

    SPECIAL REMARKS

    Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

    The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

    ======================

    More information is a lot to explain and resolve the problem.

    Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

    Because not only it solves problems, there will be new user settings and the program files needed for the user account.

    Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

    Here is the link.

    Run hitman pro 3.5

    http://www.SurfRight.nl/en/downloads

  • I get "RUNDLL error loading C\Windows\arelasiwitafabiz.dll." when I start my system.

    Original title: my first RUNDLL error.

    At startup, there is a small window on my desktop saying RUNDLL error loading C\Windows\arelasiwitafabiz.dll.

    It disappears if I click OK, but always returns to the start. I downloaded a couple of registry cleaners; It is on the advice of the other forums, being a registry patrol, but I later read this was a suspicious program, so I removed it. In fact it seems to be a large number of suspects in programs offering assistance, so now don't know what to do. Finally what effect an error RUNDLL has on a computer. Any help please

    The 10 landfills, three were from 2009 so I don't check those out.  Four were on 8 June, two of 14 may, and one from May 17.

    Finding bugs were IRQL_NOT_LESS_OR_EQUAL (4) or INVALID_WORK_QUEUE_ITEM (3).  INVALID_WORK_QUEUE_ITEM bugs were all attributable to the sunkfilt.sys on December 8, 2004 - the "USB driver for the 6 in 1 media card reader" (your system is a HP?).  The suggestion would be to update the driver, or off the device if you do not use.  Finding bugs IRQL_NOT_LESS_OR_EQUAL were of same and all inconclusive - not irrefutable.

    I would say that running chkdsk, and if you have a disk XP,SFC/scannow [Moreover, this], starting with.

Maybe you are looking for