Error (C:\Windows\system32\Macromed\Flash\NPSWF32.dll:5)

Similar Questions

• C:\Windows\system32\Macromed\Flash\Flash10d.ocx

  Can someone please, please help?

  I installed FP10 on Windows Vista & says it's full (shows the icon "F" flipping around & all).  But, when I try to open C:\Windows\system32\Macromed\Flash\Flash10d.ocx in my "C drive", I get a pop up window "Error opening file for writing" in this file and wants me to have an abortion.

  I should be grateful if you would help a lot on what I should do.  Pages on Web sites take forever to download.

  try to type/copy this in a windows explore address bar %systemroot%\system32\Macromed\Flash

  If you have installed the Active X, it should be there. In the case opposite and you try to install again, and the file is not yet there, check your IE settings to see if you have disabled ActiveX controls and change "Download signed ActiveX controls" invites together "run ActiveX controls and plug-ins" to activate or request.

• I can't find any directory called C:\WINDOWS\SYSTEM32\MACROMED. Can you advise me?

  I am running Vista 32 bit Service Pack 2 OS (windows Vista Home premium).  I recently downloaded "Adobe Flash Player 10 Active X".  It does not run is displayed for me select a desktop ICON.  I can find it in my control panel under "programs and features" where I can uninstall it if I want to.  I found a website that said it was a problem knowledge and my advice on how to solve the problem by following the methods described: 1. navigate to: C:\windows\system32\.   2. navigate to a directory called "ACROMED.  It is my problem, I do not have a listed directory called "ACROMED.  In any case after I do that I am to run flasutil9b and run as administrator, then follow the prompts through the installation of flash wizzard.  What I am doing wrong?  Unfortunately I am not computer enough to continue the process.

  Thank you to everyone out there that can help

  Flash Player is not a stand-alone program. It is a browser plugin; do not find a desktop icon or start menu for it.

  The instructions you found on the web are for Flash Player 9. Use these instructions to solve problems of Flash Player 10.

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Flash Player is installed in the C:\Windows\System32\Macromed\Flash directory

  The ActiveX is for Internet Explorer. If you use Firefox or Opera, you must download the NPAPI plugin as well.

• There the c:\windows\system32\macromed or flash dierectory directory?

  Hi - I tried, for months to download flash from adobe, that can not play videos! I had suggestions on how to do this, but cannot find directories flash or c:\windows\system32\macromed, anywhere! Go to start / computer, but the only way I can get to (vista) System 32, is by going into the properties of the system and nothing to click in there!  Where are they? Downloding flash "successfully", didn't work! Installed and uninstalled, several times, but no luck! I think that my "technicians" are tired of me!  Help!    Gracie

  Hello gracie lynn,

  1. what suggestion you have to solve the problem?

  2. what happens when you install flash player do that you get any errors?

  You can follow the below links to fix this issues:

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Error: C:\windows\system32\spool\drivers\w32x86\dlcjtime.dll

  After update my PC with the latest patches I started getting the following error message every time I reboot:

  Error: C:\windows\system32\spool\drivers\w32x86\dlcjtime.dll
  Entry: rundllentry

  I know it has to do with my Dell printer and I have uninstalled and reinstalled the printer, but keep getting the same error message. What is the cause and how to fix?

  Hello

  See this message from Dell - even if the models are different ago probably similar
  problems with your computer and your printer. http://support.Dell.com//support/topics/global.aspx/support/DSN/en/document?c=JM&DL=false&l=en&s=Gen&docid=28E393B4B4A5ADEEE040A68F5B2849AA&doclang=en&CS

  Check with Support from Dell and their forums.

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  ------------------------------------------------

  These could help however check with 1 Dell.

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error: C:\windows\system32\shsvcs.dll

  Original title: when I turn on my computer, the first thing it does is to show this error:__c:\windows\system32\shsvcs.dll___I simply, click OK and it opens. I want to fix this problem. Looking for a solution.___Thanks, __sallygbrentg

  Start up

  Hi Sallygbrentg,

  1. Since when are you facing this problem?
  2 did you last modified the software on your computer?

  Shsvcs.dll module is the Windows Shell Services dynamic link library and it has been written by Microsoft Corporation. The module is a component of the Windows operating system.

  Step 1:

  Try the SFC scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Step 2:

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Run dll error: c:\windows\system32\werconcpl.dll

  My computer took a long time to start now, after I entered my password to log on, the screen goes dark forever and finally he said something about a Run dll error: error c:\windows\system32\werconcpl.dll conducting a paging operation and it still doesn't let me start the computer. What is the problem here and how can I solve this problem? Thank you!

  Your PC from a manufacturer of large surfaces, for example Dell/HP and if yes to the first startup, in the first screen before winning, is there an option to run this diagnostic to the?

• Message: Unable to save C:\\winXP\system32\macromed\flash\flash9b.ocx

  Range of all-in-one printers, HP Officejet J6480.  Operating system WinXP, error message: C:\\WinXP\system32\macromed\flash\flash9b.ocx.  Asserts that it could not register.  The message of components new add frequently and tells me to insert the CD, then add.  I try to cancel, what can I do after several tests.  When I put in the CD, I have installed all the components so I go out.  A day or two later, the same message appears.  I looked on the internet and this seems to be a common problem, and for a payment of a fee, I can get a fix.  Can anyone help?

  Go ahead and uninstall all the HP software on your computer. Reinstall the patch to make sure that uninstall does not delete anything from the patch. Finally, download and reinstall the software from here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-62866-1&cc=us&dlc=en&lc=en&os=228&product=3635378&sw_lang=

  It seems that the patch can have 'broken' solution Center. Just need to be reinstalled.

  -Sean

• How to repair this error C:\Windows\System32\mscoree.dll__

  How to repair this error C:\Windows\System32\mscoree.dll

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  If necessary:

  Mscoree.dll could not be found error resolution
  http://pcsupport.about.com/od/findbyerrormessage/a/mscoree-DLL-not-found-missing-error.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The required file is missing or contains errors. file: \Windows\system32\winload.efi.

  So, today, for Christmas, I got a laptop Asus R503U series. I played a little bit about it for a while (all in the same day) and towards the end, a pop window up told me that windows live was insensitive and I had the possibility to close or wait until after I hit wait three or four times I finnaly hurry then close my phone froze so I restarted and when it shows is I was instantly to a screen that says : Recovery of that your PC needs to be repaired. The application or the operating system could not be located because a required file is missing or contains errors. file: \Windows\system32\winload.efi. you will need to use tolls to recovery on your installation media. If you do not have any installation media to contact your system administrator or the computer manufacturer. I bought this laptop from a Pawn shop with just the phone and any other case it came pre installed with windows 8, it's even a sticker on the bottom. I really need help! The cheapest way to please and thanks a lot!

  Thank you so much you pretty much confirmed what I thought it was true. I have a windows desktop computer which is able to create a recovery Flash disk, but the size is 16 GB, disappointment, enough with what you just explained?

• Impossible to uninstall Flash file from the location: C:\Windows\SysWOW64\Macromed\Flash\Flash.ocx

  Hi all

  We cannot uninstall location Flash file: C:\Windows\SysWOW64\Macromed\Flash\Flash.ocx

  We tried the following options:

  1. http://www.instant-registry-fixes.org/uninstall-flash-player-to-fix-flashocx-error/.

  2 the Uninstaller (www.adobe.com/go/tn_14157) mentioned in the administration guide(http://www.adobe.com/content/dam/Adobe/en/devnet/flashplayer/pdfs/flash_player_11_5_admin _ guide.pdf)

  Appreciate your help.

  Thanks in advance.

  Hello

  From Windows 8 Microsoft embeds Flash Player in the browser.  This includes Windows Server 2012.  For this reason, Microsoft locks the permissions on files to prevent users to erase files.  Microsoft does not provide a standalone installer of Flash Player for IE/Edge on these platforms and all updates from Microsoft via Windows Update.  By force to unlock the file and forcing the removal of the file you probably made your system unable to re - install Flash Player because there is no separate standalone installer for Flash Player on Windows Server 2012.  If you do not need Flash Player on this system, which is not a problem.  But if you need Flash Player on this system, you can, or can be not, be able to reinstall it.

  --

  Maria

• Module C:\Windows\SysWOW64\Macromed\Flash\Flash9b.ocx failed to save

  Whenever I restart my computer I am asked to insert the disc from center of solutions.  When I do, I get the following error message:

  Module C:\Windows\SysWOW64\Macromed\Flash\Flash9b.ocx failed to save.  HRESULT-2147220473. Please contact the support staff.

  I have a HP Officejet J4550 all-in-one equipped with Windows Vista.  Otherwise, everything works fine. Any ideas?  Thank you.

  I tried your suggestion and got the same error message after the repair.  However, when I rebooted, I have not the prompt to insert the disc of Center of Solution, so maybe it will work.  I'll check in with you later.  Thank you very much!

• flashplayer. XPT can not be written to C:\Windows\SysWOW64\Macromed\Flash

  Windows 7 x 64

  Firefox 14.0.1

  Flash player 11.3.300.265

  Hello

  installation of install_flash_player_11_plugin.exe ends with the error message that flashplayer.xpt cannot be written to C:\Windows\SysWOW64\Macromed\Flash due to lack of rights.

  Who can help me?

  Please do not hesitate to send it to me at [email protected] or post somewhere like dropbox or sendnow and send me the link.

  I also received an email from another client this weekend who had encountered a similar problem.  Here's what they found and how they have managed to solve the problem:

  The reason for blocking files flashplayer.xpt was the ThreatFire program.
  Although I removed the auto-start program and found no entry in the Task Manager was running of a service of ThreatFire and blocked the installation process.
  After uninstalling ThreatFire completely from the computer, I had no problem to install flashplayer.

• When I start my computer I get errors saying: "error c:\windows\system32\yejedotu".

  original title: error c:\windows\system32\yejedotu

  This c:\windows\system32\yejedotu message keeps appearing when I start my desktop computer. However, it also appears when I open programs and web pages. I did several analyses of viruses from my computer using AVG and found nothing. Please can anyone advise me on what to do. I'm not totally computer his life so I need simple instructions

  Hi JaiPatel,

  It seems that the computer is infected by virus infections and malicious software.

  I suggest that you run a parser online on the computer after the computer starts in mode safe mode with networking.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  The scan below only works on the 32-bit version of Windows

  http://OneCare.live.com/site/en-us/default.htm

  You can use the Microsoft security essentials to scan your computer

  http://www.Microsoft.com/security_essentials/

• runtime error c:\windows\system32\spoolsv.exe

  runtime error c:\windowa\system32\system32\spoolsv.exe

  How can I solve this problem

  Hello
   
  (1) when exactly you get this error message?
  (2) remember to make changes to the computer before the show?

  I suggest you to follow these steps and check if that helps.
   
  Step 1:

  Try to start the computer in safe mode and check if you get the same error message, here the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  If you are not able to find the problem in safe mode to perform step 2.
   
  Step 2:
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
  Note: Make sure that restore you the computer to a normal startup mode once the diagnosis is made. Follow step 7 of the above mentioned link.
   
  Step 3:
  I suggest you a scan currently running on your system.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Hope this information is useful.