There the c:\windows\system32\macromed or flash dierectory directory?

Similar Questions

• I can't find any directory called C:\WINDOWS\SYSTEM32\MACROMED. Can you advise me?

  I am running Vista 32 bit Service Pack 2 OS (windows Vista Home premium).  I recently downloaded "Adobe Flash Player 10 Active X".  It does not run is displayed for me select a desktop ICON.  I can find it in my control panel under "programs and features" where I can uninstall it if I want to.  I found a website that said it was a problem knowledge and my advice on how to solve the problem by following the methods described: 1. navigate to: C:\windows\system32\.   2. navigate to a directory called "ACROMED.  It is my problem, I do not have a listed directory called "ACROMED.  In any case after I do that I am to run flasutil9b and run as administrator, then follow the prompts through the installation of flash wizzard.  What I am doing wrong?  Unfortunately I am not computer enough to continue the process.

  Thank you to everyone out there that can help

  Flash Player is not a stand-alone program. It is a browser plugin; do not find a desktop icon or start menu for it.

  The instructions you found on the web are for Flash Player 9. Use these instructions to solve problems of Flash Player 10.

  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Flash Player is installed in the C:\Windows\System32\Macromed\Flash directory

  The ActiveX is for Internet Explorer. If you use Firefox or Opera, you must download the NPAPI plugin as well.

• C:\Windows\system32\Macromed\Flash\Flash10d.ocx

  Can someone please, please help?

  I installed FP10 on Windows Vista & says it's full (shows the icon "F" flipping around & all).  But, when I try to open C:\Windows\system32\Macromed\Flash\Flash10d.ocx in my "C drive", I get a pop up window "Error opening file for writing" in this file and wants me to have an abortion.

  I should be grateful if you would help a lot on what I should do.  Pages on Web sites take forever to download.

  try to type/copy this in a windows explore address bar %systemroot%\system32\Macromed\Flash

  If you have installed the Active X, it should be there. In the case opposite and you try to install again, and the file is not yet there, check your IE settings to see if you have disabled ActiveX controls and change "Download signed ActiveX controls" invites together "run ActiveX controls and plug-ins" to activate or request.

• Error (C:\Windows\system32\Macromed\Flash\NPSWF32.dll:5)

  When I try to install the updated 10.3. ??? He tells me this - errors encountered installation: a required file (C:\Windows\system32\Macromed\Flash\NPSWF32.dll:5) could not be written due to insufficient permissions.

  Can someone help me please?

  p.s. I am the administrator of the laptop.

  I suggest you try the following

  • Download uninstaller http://kb2.adobe.com/cps/141/tn_14157.html FP (save to disk);
  • Download the executable install (s) of http://www.adobe.com/products/flashplayer/fp_distribution3.html (save to disk);
  • Close all the browser windows, and then run the uninstaller downloaded;
  • Restart Windows;
  • using Windows Explorer go to C:\Windows\system32\Macromed\Flash
  • Remove all remaining files in this folder;
  • now run the install (s) downloaded.

• application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  Hi everyone, my fathers laptop crashed yesterday and since then he was able to start and the following message appears

  application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  something appears then it restarts. I did some occasional checking of this problem, as believe that he may be able to replace the file with its installation in recovery mode disc, although neither nor I did before can someone provide some support on what to do, ideally if we can get into windows and get the docs off the laptop computer he is happy the new facility because I think that it maybe Basic virus/malware issue.

  Thank you for your time and help in advance

  If the c:\windows\system32\odbcint.dll file is missing, you see a message like this:

  User Interface failure
  The logon User Interface DLL msgina.dll failed to load.
  Contact your system administrator to replace the DLL or restore the original DLL.

  There is a button to click to restart, which when clicked, takes a while to reboot the system.

  If the c:\windows\system32\odbcint.dll file is corrupted, you will see a message like this:

  Winlogon.exe - bad Image
  The application or DLL C:\WINDOWS\system32\odbcint.dll is not a valid Windows image.  Please check this against your installation diskette.

  By clicking OK twice, you will see the message above about the failure of User Interface.

  There will be events in the case where the viewing Application log that look like this:

  Event type: error
  Event source: ODBC
  Event category: no
  Event ID: 0
  Description:
  Cannot find the description for event ID (0) in Source (ODBC). The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: unable to load the resource DLL odbcint.dll.

  You should figure out what happened to get into this situation and respond to the following questions, then decide which is the best plan:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system worked well until: _.

  Did the problem to the top after show installed new software and if so, what software?

  You have recently installed any type of remote control software?

  Now to fix it depends on how you are fixed to the boot media, since you'll have to start on something.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, start in Recovery Console XP using your genuine XP bootable installation CD or if you have a genuine XP bootable installation CD, you can make one (no XP media required).  If you don't know what type of bootable media, you, do a CD of bootable XP Recovery Console and do not forget.

  If Yes, you want and are not in possession of a genuine XP bootable installation CD or a CD from Recovery Console XP bootable, the instructions to create a bootable XP Recovery CD of Console can / will be provided before any questioning begins.

  You can replace the missing file or suspect the XP Recovery Console by entering the following command:

  Copy c:\windows\system32\dllcache\odbcint.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  If you get some type of a file not found message, the file is easily replaced using other methods.

  Remove the CD and type "exit" at the Recovery Console prompt to restart the system.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Vista, it lacks the file:\windows\system32\winload.exe.status:0xc000000f,D partition was installed at the factory, backup

  I deleted the contents of partition D on my friends family vista premium, now it will not boot from the disk of the plant, he said that the file:\Windows\system32\winLoad.exe is missing with status 0xc000000f were if I can get this file or is there anything I can do to get the content from the back of the drive D : or just that he can start up without this partition D

  Hello

  the D: Recovery partiton was photographed by the manufacturer during production

  Once deleted it

  you are not supposed to ever altering this partiton

  as you have problems with the process of recovery of manufacturers, contact the manufacturer

  It's their recovery process not microsofts

• What is the purpose of the *.pdf file in c:\windows\System32\Spool\Drivers\W32x86\3 directory?

  My *.pdf in the c:\windows\System32\Spool\Drivers\W32x86\3 continues to grow until my spooler goes down. What is the role of the *.pdf file in the print driver?

  All that I can say is that my main printer is a HP Laserjet P2014 and there is no pdf files in the folder that you are referring to.

• Questions about the C:\WINDOWS\SYSTEM32\DRVSTORE file?

  Original title: File C:\WINDOWS\SYSTEM32\DRVSTORE.

  under the c:\WINDOWS\system32\DRVSTORE folder is displayed in blue, others are black. Why? is it safe?

  Compressed medium blue. Encrypted medium green. You can have one or the other, but not both.

• Anyone know what the error windows\system32\urgRLfgh.dll? Or where to go to get a fix?

  error urgRLfgh.dll

  Anyone know what the error windows\system32\urgRLfgh.dll? Or where to go to get a fix?

  Thank you

  Andrea

  Hello

  1. Once you get this error message?

  2. did you of recent changes to the system before the show?

  Please provide more information on the issue to help you best.

  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375

  Meanwhile, I suggest you perform the methods mentioned below and check if it helps.

  Method 1:

  Follow the link below and check if the problem persists in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: perform a clean boot.

  To perform a clean boot and see if the problem still occurs, follow the steps in the below link.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Method 3: perform a virus scan

  I suggest to download the Microsoft security since the link Scanner and performs a search on your system. Check if the problem persists.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Microsoft safety scanner ends ten days after downloading. To re - run a scan with the latest definitions of anti-malware, download and run Microsoft Safety Scanner again.

  Let us know if it helps.

• Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 80070003))

  I had to uninstall iTunes a few months ago and successfully re-installed, but part of my music was missing.   At one point, following the instructions on a thread on the forums Apple or Microsoft, I saved my music library on the desktop. Since then, I do not have a library of music on the desktop file.  In my looooooong hours trying to fix things, I do not know if I deleted it or what.

  Now, I get the message:

  "Backup has encountered a problem during backup of the C:\windows\system32\config\systemprofile\Desktop\music file. Error: (System does not find the specified path. (0 x 8007003)) "whenever I have backup my computer.

  As I understand it, that does not affect really any other files, they rely on the spot (I think), but

  HOW CAN I GET RID OF THIS MESSAGE? or what is the cause?  Of course, I could use help in simple English, step by step, as I'm not very techno...

  Thank you!!!

  Try to be...

  SereneJulie

  Hi serene,

  Thanks for posting your query on the Microsoft Community.

  As indicated by the error, this problem appears, when these files/libraries that are saved automatically are not present on your computer. I suggest you to follow the steps below and check, if it can help solve the problem.

  • Create missing files that are listed in the error message.
  • Exclude files from the files to backup in the backup settings and then include these files in their original location. To exclude folders in other communities and to include these files in the original location, follow these steps:
    1. In Control Panel, open backup and restore.
    2. In the section back up , click change settings.
    3. In the dialog box Configure the backup , click Next.
    4. In the dialog box that you want to save , click Let me choose, and then click Next.
    5. Expand data files, library, expand additional locations, and then click to clear the check boxes folder AppData, Contactsand Research .
    6. Expand computers, expand the element of your system drive (for example, expand Local disk (c)), expand users, , and then click to select the checkboxes AppData, Contactsand Research if they exist.
    7. Click Next, and then click Save settings and exit.
    8. Backup and restore, click back up now to perform a new backup. The backup operation must complete without errors.

  If the problem persists, I suggest you follow the steps in the following article for troubleshooting backup problems.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors

  http://support.Microsoft.com/kb/973455/en-us

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  This is the error message I get after several days of decline in dropbox, my Norton, saying that he was sure loading! I have read and re read most of what people have written, and I have no idea! I'm not a person irritable and can someone put in easy terms what should I do to solve this problem! I read try it who try and read that nothing works. Does anyone know if something works and can it tell me please. Also if someone from Microsoft is reading this why not have you solved this problem?

  Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Dropbox\Camera file will be mailed. Error: (System does not find the specified path. (0 x 80070003))

  Hello

  You did changes to the computer before the show?

  These problems occur because the folders or libraries that you are trying to back up or restore include a reparse point. Analytical points are similar to shortcuts Windows or Unix symbolic links. A point of analysis can be used to point to a file that is moved temporarily to a different drive.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455/en-us

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Sony VGN - NR160E Ultimate laptop. w / Windows 7 Ultimate, failed to load because the c:\windows\system32\drivers\elxstor.sys of the 5.2.10.211 file is corrupted or missing

  I have a laptop VGN-NR160E Sony with an Intel Core 2 Duo T5250 / 1.5 GHz with Vista OEM. It has been upgraded to Windows 7 Ultimate. The former owner has not only any disk, therefore, or I'm doing. I have after I tried to update and got an error this system failed to load because the c:\windows\system32\drivers\elxstor.sys of 5.2.10.211, the file is damaged or missing, I tried all the computer in repair and drives the ISO of Windows 7 options, I need help by someone much more intelligent and savvy than me in computer science.

  You have a pirated copy of Windows 7 Ultimate on your system. You must install a genuine copy.

• Script engine "VBScrip' for the 'C:\Windows\System32\OEM\_NowIntoDT.vbs' script is not found.

  Hi guys, I have a new desktop computer (a month) under window 7 Home Premium, 64-bit operating system.  A few hours ago, when I turned on the computer, it boots up to the usual bright but the strange message below appears and continues to appear on the screen every time that the computer starts. Of course I can delete the message by closing (by clicking the X)

  Script engine "VBScrip' for the 'C:\Windows\System32\OEM\_NowIntoDT.vbs' script is not found.

  So far, it does not appear to affect the operation of the computer, maybe because I haven't downloaded all the programs. Yet, I am uncomfortable with this message. Can someone please tell me what does this message mean and what should I do to solve the problem?

  I forgot to mention that I removed the eve of 60 day trial of McAfee Internet Security.

  Thanks for your kind suggestion.

  FrozenRiver

  Hi guys, I have a new desktop computer (a month) under window 7 Home Premium, 64-bit operating system.  A few hours ago, when I turned on the computer, it boots up to the usual bright but the strange message below appears and continues to appear on the screen every time that the computer starts. Of course I can delete the message by closing (by clicking the X)

  Script engine "VBScrip' for the 'C:\Windows\System32\OEM\_NowIntoDT.vbs' script is not found.

  So far, it does not appear to affect the operation of the computer, maybe because I haven't downloaded all the programs. Yet, I am uncomfortable with this message. Can someone please tell me what does this message mean and what should I do to solve the problem?

  I forgot to mention that I removed the eve of 60 day trial of McAfee Internet Security.

  Thanks for your kind suggestion.

  FrozenRiver

  Hello

  Usually when you see messages like this when you start the computer, this means that a file has been uninstalled, but the reference to this file in the startup list remains intact.

  When the Start Up of the list (the programs that start when the computer starts) is read the system searches for this file and of course can't find it, you see the "not found" error message

  Press the Windows Logo key + R to start the box run.

  Type msconfig.exe in the Open box, and then click OK.

  Click the Startup tab.

  Expand the command column and look for the line with the same name of _NowIntoDT.vbs .

  Remove the check mark from this line.

  Click apply/OK.

  Restart the computer.

  Let us know the result.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\.config file. Error: (the system cannot find the specified file. (0 x 80070002))

  I received this notification from my last backup. Some files were not saved.

  "Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\.config file. Error: (the system cannot find the specified file. (0 x 80070002))

  Should I worry. My previous backup was cancelled and not by me.

  OT: Warning backup

  Hello

  I suggest you try the steps from the following link:

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281

• The C:\Windows\system32\mshtml.hlp file is missing

  I get this error message if I try to save a picture to e-mail the file C:\Windows\system32\mshtml.hlp is missing. On websites, there are links invisible and images. For example, the squares above this entry are empty, but if I move my cursor over them, the words seem to describe the action of the box, e.g. bold, italic.  Help, please. san2h16

  0

  In an attempt to save a photo in Outlook Express, try this, bring up the email with the picture in it and

  then upstairs, Clk file and save as and save it in a folder or your desktop. In my case, it opened in

  Windows Mail, then I could do a right click on the image and save as.

  If you save from Windows mail, it can record as usual.

  Good luck