Error: Cannot replace Pref.

Similar Questions

• Error "Cannot read disc" after nc4200 replacement hard drive

  Hi all

  I read through the postings but did not see an exact match for the issue I'm having.

  My 5 year old needed nc4200 finally a replacement hard drive.  I bought a new 120 GB ATA-6 WD Scorpio Blue 40 GB ATA-7 Toshiba plant.  I was able to clean up a few errors on the old disk and the Partition Magic 8.0 successfully used to copy all the data in a single primary partition on the new 120 GB drive using all available space.

  I started with success the drive on the Windows desktop using a separate post of full PC.  When I inserted the new, WD drive in my nc4200 however I got an error "cannot read disc" immediately after the MESSAGE.  The BIOS is a short wee on tests of diagnostic and other information on the hard drive, but I ran with success a test drive in the menu of the BIOS with the net results.

  I have advanced and updated the BIOS to version F.0F thinking there may be some 1024 cylinders deliver or other incompatibility big disk, but this new version also shows the error of reading.  At this point, I'm stumped.  Why this new boot in my desktop PC drive but fail in my nc4200?  What do I have to use some tools HP blessed to make this readable disk?

  Thanks in advance!

  Well, I guess you can call this one resolved.  I sent the WD Scorpio Blue 120 GB drive (model WD1200BEVE) and ordered a WD Scorpio Blue 80 GB (model WD800BEVE) instead.  I cloned my old Toshiba 50 GB 5400 RPM (model MK6026GAX) with Acronis True Image WD Edition.  I installed the new drive in my nc4200 and pulled upward on the first try!

  I'm still not sure why the 120 GB didn't work.  The only thing I noticed is that the done 120 GB one noise rattling and the 80 GB is not then maybe the drive was defective.  I'll never know however, if it was the drive or the size of the drive, that was the question, but I hope that this info will be useful to someone else looking to exchange a HD of aging in a nc4200.

• C5180 all-in-one cannot clear error "cannot print".

  I replaced the ink but still error ' cannot print replace the following empty ink cartridge to continue printing.

  I can't print how can I clear this

  I uninstalled the software and reinstalled still cannot print

  Help, please

  I found the solution

  Unplug the power cord

  2, press OK and help

  3. plug the power cord still OK and help

  4. while still holding OK and help to wait for the screen on the printer to go black

  5. turn on the power button / stop

  This should reset the printer

• error: "cannot find symbol" when you use String.getBytes (java.nio.charset.Charset)

  I have a very simple java class that uses String.getBytes (java.nio.charset.Charset). When I use loadjava, I get the error: "cannot find symbol" for this call. Any ideas on what could be the problem?

  Here is the full source:

  package mytest;

  java.lang.String import;
  java.nio.charset import. *;

  public class MyTest {
  public final static Charset utf8charset = Charset.forName("UTF-8");

  public int printString (String s)
  {
  Byte [] utf8 = s.getBytes (utf8charset);
  System.out.println (utf8);
  }

  public void printString)
  {
  printString ("hello");
  }

  };

  Thanks in advance,

  Keith

  Your code is correct for java 1.6 and higher...

  First of all, you should check that java version is on your database...

  FUNCTION to CREATE or REPLACE getJavaProperty (myprop IN VARCHAR2)

  RETURN VARCHAR2 IS THE JAVA LANGUAGE

  name "java.lang.String return java.lang.System.getProperty (java.lang.String);

  SELECT getJavaProperty ('java.version') of double;

  in my case, I have java 1.5...

  If you look at the Javadoc String (Java Platform SE 7) you will notice that your version is located for java greater or equal to version 1.6

  Try with:

  CREATE OR REPLACE AND RESOLVE JAVA SOURCE NAMED INSURANCE2."Test1" as
  public class MyTest
  {
  public static int printString(String s)
  {
          try
          {
          byte[] utf8 = s.getBytes("UTF-8");
          System.out.println (new String(utf8));
          }
          catch(Exception ex)
          {
            return -1;
          }
          return 1;
  }
  
  };
  

• Error: cannot access dead object

  [JavaScript application] Error: cannot access dead object.

  This message appears repeatedly after using Gmail, sign out, close the tab, then open a new tab.

  Uploadd disabling Drag & Drop appeared to be... on my 7 machine. Now for my Vista laptop. Thank you.

• Dynadock V10 - "error cannot find Setup file" INSTALLER ERROR

  Hi I have a toshiba dynadock V10.

  Whenever I try to install the drivers, that it says "error cannot find Setup file. I have downloaded the latest drivers and off my anti virus and cut all the proiceses running and no go. There are a few references to this on the internet, but none has a solution.

  I amn trying to install it on an equium U400 running windows 7.

  Curiously, it loaded on an old dell pc easily!

  I spent hours looking on the net and there is no answer. I have nothing showing in the programs to uninstall.

  Thank you

  > Oddly enough it loaded on an old pc easily!
  Hello

  This means that drivers are ok and that there must be something wrong with the system pre-installed on Equium U400.
  How to proceed?

  It is important that you don't would NOT connect the Dynadock to the laptop before installing the software and drivers was not finished.
  Therefore, you need to install the software first. Then after new reboot connect the Dynadock to portable and installation would end the next steps.

• Satellite A50-111: I get an error: cannot install MBR disks

  I have a satellite A50-111. The system with the error would not start a system disk and tried to boot from the network.

  To get the pc working, I tried to reinstall Win XP Pro, but I get an error: cannot install MBR disks

  How to solve this?

  Jon

  Hello

  Have you tried to install the unit using the supplied restore CD?

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• TestStand Java - 1500 error cannot find the class

  Hello world

  I use Java 1.7 and TestStand 2010.

  I try to add a java class in the computer example folder and call the method.

  The java class is just as below, because I'm just trying to call my own java class.

  I put the class path to start the JAVA virtual machine in the directory where the example of the computer (which is also the directory where I put my java class).

  TestStand can call methods of the computer, but not mine (received the error 1500 error cannot find class). I put my my java method call among calls for default computer example.

  Also I read similar topics, but again I can not resolve the error.

  Where is the part that I'm bored, in fact? Please share some ideas.

  Note: I even try to leave the empty class path, but TestStand can always call the methods of the computer. Why?

  ----------------------

  public class TestJava {}

  Public Shared Sub main (String [] args) {}

  }

  public String returnString(boolean a) {}
  Return "success";
  }

  }

  To load a class which is within a package, you can use the package rating (or change the example in order to to use). The path to the class is passed directly to the JAVA virtual machine to load the class, but really what is necessary is the package from the class path, including the full path to the class.

  This means you need to do the following:

  1 set the class path in the base directory where you created all your classes, if you have the following structure:

  • MyFile.java
  • builds
  • • MyPackage
    • • MyFile.class

  You must set the classpath in the builds directory

  2 when you set up your steps, you must set the path to the class in your steps from Java to MyPackage/MyFile.class (note the separator is a forward slash, not used Windows backslash, then the Browse button is not quite help with that).

  Another important thing is that when you set the classpath variable you remove the normal Java class path, if you are using Java classes from the library by default, you may have to add \lib\rt.jar

• Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  I recently noticed this error message-

  Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  whenever I try to click on a card game.  Help, please!  Is there something I can download again to fix this error?

  Hi jaymeister3580,

  It seems that the problem is related to the installation of the game itself, I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below. The following steps are worth a try:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check if the problem persists

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Galaxy S4, HP 8600, error: cannot use this photo option

  Hello.  I have a problem with mobile printing to my HP 8600 N911g of my Samsung Galaxy S4 v4.2.2 Android running.

  According to the HP documentation this combination of devices should be able to use the built-in HP android printing solution, which basically means that I wouldn't install anything to print.  When I try to print from the browser on the phone, I choose the option 'print '.  I am able to locate and select the printer on my network.  I see the preview of the web page on the phone.  I click on the "print" button and get a message in the top of the screen saying "starts to print.  Then I get an error pop up at the bottom that says: "print error: cannot use this print option.

  I turned the market things.  The phone and the printer are on the same wifi network.  The printer I have installation ePrint as well as wifi direct (although I do not know what counts).  I tried to disable bluetooth.

  Clues?  Would appreciate some help here.

  PS - I also tried to download the HP ePrint app on the android market and had success with either... but I'm sure that I shouldn't do that, right?

  Thank you.

  I got a success...
  I tried to change the printer by 'search' again, then clicked on my printer and then it worked...

• 0x8024400A error, cannot install Windows updates.

  Original title: error cannot access windows update

  0x8024400A error message

  Hello

  1. you have any application installed on the computer security?

  2 did you a recent software or changes to the material on the computer?

  I suggest you run the FIXIT from the link below and. You can also try other steps listed in this article.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941

  Hope this helps and keep us posted.

• PC has shielded blue with a 0x000000BE error - cannot write to read-only area

  PC DH a blue armored with a 0x000000BE error - cannot write to the read-only box. Cannot start Windows at all - non-secure mode, not last good configuration, nothing. I ran chkdsk with almost all switches to repair bad sectors (chkdsk found one), but it does not seem to fix and the pc still does not start. I'm more curious as to why you questions about Kaspersky and Mozilla (it uses at the time), but if anyone has any idea on what I can do, please respond. Thank you.

  Hi Carmel55,

  • Did you the latest changes on the computer?

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

• error: "error cannot start fron CD-error 5."

  Original title: cannot restart from a cd

  Hello

  I'm trying to restart xp so that I can use a Norton recovery CD. However rebooting and pressing the prioritization boot from the windows cd comes up with "error cannot start fron CD-error 5."

  Any ideas?

  Thank you

  The disk you are trying to boot from was not burned correctly. You will not be able to boot from it.

• When the computer restarts, I get the error cannot create shell notification icon please help

  When I reboot count it I get error cannot create shell notification icon can any body help me

  Thank you

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest you update your BIOS, check with the manufacturer of the system for further assistance.

  Apart from that, I suggest you do an online virus and malware scan on the system.

  http://OneCare.live.com/site/en-us/default.htm

  If the problem started occurring recently, then I suggest you to do a system restore. See the article mentioned below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.