error: cannot run two device installations
Hello
Whenever I try to install something I get the error Impossible to run both facilities, but I'm not nothing install at all. disable the firewall doesn't seem to help. I read somewhere else on a solution for xp, with regedit.exe. Is there a similar solution for vista or another solution? Please I really need and can't find any help on google or anywhere else! Thank you!!! Antonella |
|
Hello Antonella,.
1. did you of recent changes on the computer?
2 when was the last time it was working fine?
3. what you are trying to install? It is a software or hardware device?
4. do you have security software installed on the computer?
5. What is the full error message?
It is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you perform a clean boot and check.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Error: Cannot proceed with the installation
For the last month or so I tried to update Flash Player. I get to a certain point (about 90% through the installation) and I get a message: "error: cannot continue with the installation.
It opens the page of Flash support in the browser and told me that my installion failed. I tried all of the suggestions, including making a 'clean' installation by deleting in the Libray files, so to download and run the Flash Uninstall app player. So currently, I have NO installed Flash Player version and am still getting the erroe message.
Mac OSX 10.8.4
Mac Mini 2.26 Intel Core Duo - 8 GB of RAM
Browser: Firefox 22.0
Flash Player V 11.7.700.225 strives to update-11.8
Thanks in advance for any help you provide.
Dave
You run any kind of antivirus? or a firewall?
Have you tried to install under a different user account?
-
Error: Cannot run program "jar": CreateProcess = 2 error
Hi all
I create a BlackBerry App... All this worked fine until there are times... Now when I agin tried to run during the packaging of the app has been mentioed below error...
"Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified."
Why it is so? Please help me...
Best regards.
You can search for java 7, I had problems with it and re-installed java 6 for bb dev.
-
Hello
My apps works very well for the current code, but if I add a new function or class in my eclipse application code indicates the error of
Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified
I searched the forum and google for this problem, certain solutions are related to java path but myjava path is ok as the current code works very well
So what problem here? and whats solution for that?
has got the solution to the problem of its need for .jar files path previously I did not understand why he neede path of pot now his reason is here
-
Hi, I'm new developer on the Blackberry platform.
I make the first application, but there is a problem when I wanted to install in the Simulator.
My application has several screen and each take the server data, analyzing the data and displays on the screen.
My problem is any executable thread.
When I'm using the code below, it is fine. My application can work perfectly on a simulator.
public TestingScreen() { // Runnable thread = new Runnable(){ // public void run() { // TODO Auto-generated method stub // my code get data from server Dialog.alert("Hii"); // } //}; //new Thread(run).start(); }
but, if you use floor area or UiApplication.getUiApplication (.invokeLater), I got error "i/o Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified"
public TestingScreen() { Runnable thread = new Runnable(){ public void run() { // TODO Auto-generated method stub // my code get data from server Dialog.alert("Hii"); } }; new Thread(run).start(); }
I have the 11 screen and all have executable statement and works perfectly. Can run in the Simulator, can get data from the server. But when I create the new #12 screen (copy paste other on-screen), page couldn't use an executable statement. Each I use Runnable/thread, I got error. But when I remove an executable statement my work normally requires.
I already have Google but I do not get the answer.
Please advice. Thank you very much.
Kind regards.
hrnt, thanks for your answer on this issue. It helped me solve my problem as well.
Just to add, for someone else, I use the 32-bit and changed Java SDK my way to the bin folder where the SDK was installed.
-
I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified
Why is the error, how to fix?
File jar.exe. For example, I have a copy of it in C:\Program Files (x86)\Java\jdk1.6.0_24\bin
-
Hi guys,.
I'm trying to build my console application using Ant. It is a part of my build.xml
When I try to "build Ant" I get this error returned:
I/o Error: Cannot run program "C:\Program": error CreateProcess = 87, the parameter is incorrect
referring to this line:
I tested the names of directory and environment variables all (the variable
${46.jde.home}
too) is set correctly, but the error is still there... How could I solve this problem?
Thank you very much
Sometimes, the length of the path give birth this error but I have not seen in a while. I ended up installing most of my OCD: \RIM apps to avoid path issues all together.
-
original title: Skype
How to acess, Skype profile to set parameters when crash anotification come tell me that the error cannot run
Hello
The question you posted is more appropriate for support help forums Skype. I suggest you send the same on the following link for assistance:
I hope this helps.
-
ASP - function Remote - error: cannot run the trigger
Hello
I tried to get my macros being run by a remote server.
It's my function file remote named "remote_test_pc.asp":
framework integrated; then
conf t
interface $INTERFACE
Description macro $TRIGGER
PC-VoIP-Port Description
switchport access vlan $ACCESS_VLAN
switchport mode access
switchport vlan voice $VOICE_VLAN
broadcast storm control level 1 k pps
multicast storm-control level 2 k pps
Storm-control action trap
no event log status link
bandwidth share SRR-queue 10 10 5 75
form of bandwidth SRR-queue 10 0 0 0
priority queue
MLS qos trust dscp
no link-status of snmp trap
spanning tree portfast
spanning tree enable bpduguard
service-policy input PO_TRUST-PHONE
output
end
FI
framework integrated; then
conf t
interface $INTERFACE
No description of macro
Description by DEFAULT-CONFIG
switchport mode access
switchport access vlan 999
broadcast storm control level 1 k pps
multicast storm-control level 2 k pps
Storm-control action trap
spanning tree portfast
No switchport voice vlan $VOICE_VLAN
bandwidth share SRR-queue 10 10 5 75
form of bandwidth SRR-queue 10 0 0 0
priority queue
MLS qos trust dscp
no service-policy input PO_TRUST-PHONE
FI
output
end
FI
And this is my config on the switch to mac-group and the macro:
!
macro auto Test group address-mac-PC
Mac 0019.9990.5509 address list
!
comprehensive treatment of the auto macro
macro auto control global detection mac address
!
automatic macro execution Test-PC remote ftp://192.168.1.11/remote_test_pc.asp ACCESS_VLAN = 123 VOICE_VLAN = 127
!
When I plug this workstation for the following syslog messages:
Switch #.
Remote_test_pc.asp loading!
[OK - 1702/4096 bytes]
Enter configuration commands, one per line. End with CNTL/Z.
Switch con0 is now available
Press RETURN to get started.
Error: Cannot run the trigger Test-PC, please check trigger exists and corresponds to the valid function
26 September 11:45:37.755: % SYS-5-CONFIG_I: configured from console by console
26 September 11:45:37.772: % AUTOSMARTPORT-5-INSERT: tty0(user id:): dispositif avec adresse mac 0019.9990.5509 détectées sur l'interface FastEthernet0/3, exécuté le Test-PC) Message
Switch #.
The port works as it should, but I wonder about the error message.
The switch is 2960 with IOS 12.2 (58) SE2.
Can someone explain what this means?
Thank you very much!
Sven
Hi Sven,
I think that you are not constantly getting this message... Ignore it for now... That have no functional impact... This has been supported in 15.0 (1) SE.
Thank you
Ankur-
-
I tried to set the session established the IPs VMs / host / FQDN / VM names
but each time got the error "cannot run processSetup for configuration: cannot run createHOMObj for configuration: no GuestOS section in the XML file.
I changed the names VMS in vCenter for FQDN and it solved the problem.
-
Months after HP software reload to correct a mistake, I lost my HP Solution Center during installation.
Today, I ran the utility HP Print and Scan doctor and downloaded the software to install the HP Solution Center, but the following error message:
HP solutions Center can not run because your device installation is not complete.
I want to set up a wireless printer connection.
Appreciate your help.
Jean,
It was quite a process, but everything seems to work well!
I just rebooted my laptop, and now I have the HP Solution Center!
The error message that I mentioned in my previous note seems to have disappeared (I hope never to reappear!).
The question that light that I see is that the HP Support Assistant is always located on my taskbar. How can I get rid of this?
I can't thank you enough, John, for all your help and advice!
-
I've just updated TB I was running two clients installation 1 now have server problems
I run two clients TB since an installation - never had any problems. I've just updated to 24.4.0 and one of these installed works fine, the other will not receive or send e-mails. I get the following error.
The message send failed.
The message cannot be sent because the connection to the SMTP server mail.just - 2bme.com failed. The server is may be unavailable or refuses the SMTP connections. Please check that your SMTP server settings are correct and try again or contact the server administrator.Any SMTP server I use - I have 4 that (usually) work, no matter which I use I have the same problem. I can use the same SMTP server to send the other as the other install - install works, this one isn't. VERY STRANGE.
connectivity immediately after an update issues are generally anti too cautious anti-virus programs and blocking everything in this new unknown.
-
Dynadock V10 - "error cannot find Setup file" INSTALLER ERROR
Hi I have a toshiba dynadock V10.
Whenever I try to install the drivers, that it says "error cannot find Setup file. I have downloaded the latest drivers and off my anti virus and cut all the proiceses running and no go. There are a few references to this on the internet, but none has a solution.
I amn trying to install it on an equium U400 running windows 7.
Curiously, it loaded on an old dell pc easily!
I spent hours looking on the net and there is no answer. I have nothing showing in the programs to uninstall.
Thank you
> Oddly enough it loaded on an old pc easily!
HelloThis means that drivers are ok and that there must be something wrong with the system pre-installed on Equium U400.
How to proceed?It is important that you don't would NOT connect the Dynadock to the laptop before installing the software and drivers was not finished.
Therefore, you need to install the software first. Then after new reboot connect the Dynadock to portable and installation would end the next steps. -
Hello, my pc is very slow, and then restored the system.
And I had to delete the game 'perfect world '. I had Setup, install and went again. Except that this error when you have completed installation:Cannot run the file: iexplore.exe
ShellExecuteEx failed; code 2.
The system cannot find the specified file.I tried "Run as Administrator" and also play with the "Simple Start" and continued with the error.
Or find me in my computer the "iexplorer.exe".
A friend told me that there is an error in the "System32" folder But I haven't changed it.
What is this error? Can I format the computer?
PS: I do not speak or write English very well. Sorry for mistakes in the text.
Click Start, type: enable or disable windows features
Press enter
Uncheck Internet Explorer
Click OK
Restart if prompted.
Click Start, type: enable or disable windows features
Press enter
Uncheck Internet Explorer
Click OK
Restart if prompted.
Check to see if you can launch Internet Explorer
If the problem persists:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
-
vCO error ' cannot run action 'cloneVM '.
I worked on a small test lab and need help, solve what looks like a permissions issue. I'm running the VC 5.5, a single host 5.1 and 5.5 vco device. SSO is configured with Active directory as an LDAP server and seems to work as I can connect to VC and vcO using my AD domain admin creds. In AD, I created a user called test generator, and groups of area as follows: VCO builders-builders Account Admins VCO - my Domain admin account - my account in VC these 3 groups are all set to 'administrators' to the root. In the SSO Administrators group, I added VCO Admins and domain admins. I added the VCO manufacturers group to the Group SolutionUsers of SSO, according to me, the question relates to how it collects card authorizations in VC. I tried to make the user a domain administrator, but he has not solved. I worked through this workflow http://www.vcoteam.info/articles/learn-vco/54-create-a-simple-vco-self-service-vm-provisioning-portal-part-1.html. When I run the workflow with my ad there all works. When I run it as a builder, he fails once I answered the question of approval. The error is "cannot run the"cloneVM"action, you have no right"execution"of which escapes me? "
This occurs because the permissions are not inherited items that calls your workflow... It was mentioned in one of the comments to part 2 of this tutorial and part 3 of the series gives then further explanations and the steps needed to make things work.
Maybe you are looking for
-
How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?
-
Handed over to new iPhone and AppleCare
Hello I would buy an iPhone from a seller on Ebay. It is a refurbished device (exchanged by Apple), probably using the current owner AppleCare plan. My question is, if I wanted to buy this phone, can I buy a new AppleCare plan for it? Thank you!
-
Should I update Intel INF Utility on Satellite A100-784
Hi guys,. I want to ask you. I started using the AdvancedCare system and the menu "update Driver" it showed me that I should download Intel INF Update Utility (http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldId=16023&lang=eng). But I'm co
-
IDEAPAD S12 NVIDIA ION with windows 7 - a few questions
Hello I had a few questions about the ideapad s12 sold with windows 7 -It is in europe? (I know it's for sale on the official website of lenovo, but I think that it only contains the American market) -could I buy one on the official site? (I live in
-
BlackBerry Smartphones will not display new message indicator
My turn is receive emails again but not showing is not the new red message flag. What should I do to correct this setting?