Error Code 10 Intel 82579LM LAN connection on Portege R830 - 13 c

Similar Questions

• Intel 82579LM NIC on the Portege R830 does "Promiscuous" mode?

  Hello

  I have a laptop (Portege R830) work, who does not want to sniff the packets. I connected to a hub Netgear DS104-, as well as an older laptop and then uplink to ADSL.

  Run a continuous ping the default gateway and Wireshark on the devices and the other computer can see the pings from Toshiba, but not vice versa.

  The Toshiba runs under an administrator account has disabled Windows Firewall and my disabled Symantec endpoint encryption. I don't have any other AV to my knowledge.

  Does anyone have ideas of services I should turn on or off, or the knowledge of the characteristics of this NETWORK adapter?

  According to the Intel site "Yes, all cards Intel® PRO/100 Intel® PRO/1000, Intel® Gigabit, Intel® PRO/10 Gigabit and 10 Gigabit from Intel® currently on the market support"Promiscuous"mode." But Intel® 82579 Gigabit Ethernet Controller is not in the list that follows http://www.Intel.com/support/Network/SB/CS-004185.htm?wapkw=%28promiscuous%29

  Thanks for your time.

  Usually the firewall or security software Internet blocks pings so maybe try to uninstall Symantec completely. Disable it just cannot turn off everything.

  Another thing to try, is to use a static IP instead of DHCP. Disable IPv6 or install a new LAN driver from the Intel Web site may also help.

• 0 x 80070035 and 0X80004005 error codes when you try to connect to other computers and devices on the same network - unable to connect to the shared devices.

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows 7 PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  It took a reinstall (upgrade) to get actually it works again.

• When I tried to run my Application with "Launch Android BlackBerry" on Bb 10.2 Simulator error: ERROR: code net.rim.ajde = 4 connecting 192.168.48.130 to BAD failed! NULL children = [status ERROR: code = 0 net.rim.ajde]

  ERROR: code net.rim.ajde = 4 connecting 192.168.48.130 to BAD failed! NULL children = [Status ERROR: net.rim.ajde]

   

   

  code 0 = Please check if the Android player was totally started when you got this error. Otherwise, you can either

   

  increase the time-out of the launch of reader Android on BlackBerry-> BlackBerry Android Development Tools

   

  page preferably or wait until the Android player is completely started and try again. NULL.]

   

   

  Please guide me how to solve this question where can I find

   

  BlackBerry-BlackBerry Android Development Tools >

  Please guide me with the Exact path

  Thank you

  OK, I have one installed and installed a new freshly.

  Solved my problem. Please answer my query to the other

  on the loading BAR file on BlackBerry Q5 Please.

  http://supportforums.BlackBerry.com/T5/Android-runtime-development/how-to-load-a-signed-bar-on-the-R...

• the iPhone via USB cable connection does not work. Error code 37 - cannot initialize the connection. Sombody has a solution? Thank you.

  See statement above. connect iPhone via USB cable. Error Code 37 - cannot initialize the connection.

  Ah, a famous Apple error. See: http://support.apple.com/kb/ts1275 and http://support.apple.com/kb/TS3125

• error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone please tell me how to proceed? __

  error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone tell me please how to do this?

  Hi vivasiousv,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  See the links in the Apple Web site and try the steps mentioned below.

  http://discussions.Apple.com/message.jspa?MessageID=6096760

  http://discussions.Apple.com/message.jspa?MessageID=8436848

  For additional support post your query in the Apple discussion.

  http://discussions.Apple.com/category.jspa?categoryID=150

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell laptop 14zxps with windows 7... I get the error code 43 problem when I connect my USB on my laptop

  Hey, I have a laptop of dell 14zxps with windows 7... I get the error code 43 problem when I connect my USB to my laptop... n this laptop is designed in a way where the battery cant b removed... Please help me on how my USB is started again here... Thank you :D

  Try this.

  http://support.Microsoft.com/kb/817900

• error code 58 shows on msn connection. Where can I go with him to solve the problem

  IAM trying to connect to my MSN account but the error code 58 stop

  Hello

  Since you are faced with the question with the MSN account I recommend you post the same question to MSN support.
  http://answers.MSN.com/

• Error code 651 while trying to connect my computer to the network

  * Original title: Please help

  I am trying to connect my computer to work at our network and when I try to connect to our broadband network he said WAN mini port connection and then it gives me an error code 651.  Does anyone have a suggestion?

  You are probably connected through the bad device.  You must have a wireless to laptop (?).  If so,.

  Control Panel

  Network and Internet

  Network Sharing Center

  Change the settings for the adapter.

  Make sure that the network adapter to use is selected

  Right-click on it and select Connect

• On startup, I get the following error message: Error Code 0x8007007e, stopping me to connect.

  The section "help" on this Web site provide the following workaround:

  Workaround for error 0x800705aa code, 0x8007007e error code and error code 0x80004005

  To work around this problem, replace the file Dpcdll.dll using a clean Dpcdll.dll file has the correct version.

  Note To get the clean Dpcdll.dll file, copy the Dpcdll.dll a new computer installed.

  My problem is that not only I know not what is Dpcdll.dll file but if I did, I don't know where to find one on a new computer or how to replace on my PC.

  Any help would be appreciated. Now, my PC is dead in the water.

  Here is a link that will answer your questions and help you extract the dll file, you must
  http://support.Microsoft.com/kb/815065

• 0x0000052e error code when you try to connect to a network printer

  Original title:

  I'm trying to set up a HP Photosmart all-in-one on a home network where this is a Vista machine and host machine is a Sony Vaio with Windows 7.  Windows 7 is the new part.  I had a network implemented with the available printers and used with the host computer running XP Pro.  I get error # 0x0000052e and tells me that the printer is not found.  Online, I noticed a number of people with similar problems.  Is there an easy work around.

  Second question: I am trying to connect a HP Laserjet 5000 (2001 vintage - parallel) to the USB port of the Windows 7 machine.  Windows cannot find the printer.  It takes more than a cable of adoptive parent to have the printer detected by Windows 7?
  M.
  Hello
  1. What is the exact error message?
  2. are you aware of any changes made to the computer, before the show?
  Solution A:
  For the problem with the printer network HP Photosmart all-in-one, follow the steps in the following link.
  "0x0000052e" error when you try to install a network printer in Windows 7
  http://blogs.technet.com/b/Win7/archive/2011/03/07/error-quot-0x0000052e-quot-appears-when-you-try-to-install-a-network-printer-in-Windows-7.aspx
  Solution B:
  For the problem with HP Laserjet 5000, follow these methods.
  Method 1:
  Run the printer Troubleshooter and check for the issue.
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Method 2:
  Download and install the latest drivers available for Windows 7 from the following link.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?locale=en_US&TaskID=135&prodSeriesId=25473&prodTypeId=18972&pnameOID=14949
  I hope this helps.

• Error code: 0 x 80070490, trying to connect to the home network

  Original title: 0 x 80070490

  Received this error code when you try to connect to the home network.

  Hi Joseph,.

  Did you the latest changes on the system?

  You can try to temporarily disable third-party antivirus software and firewall installed on your computer and check if the problem persists. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

  Note: Be sure to enable the security software on the computer after checking.

• When you connect to the internet error code 678 appears. What can I do to fix this?

  I get the error code 678 when trying to connect to the internet.

  With the help of a new modem D-Link DSL provided for me by my new extreme DSL service provider.

  Have Windows XP Professional installed on my machine.

  I downloaded the updated drivers for my network n-force Nvidia card.

  When I try to connect to the internet, I receive error 678 and cannot connect code.

  A run scans regularly for any virus or malware, with none detected using Norton 360.
  In addition to performing other troubleshooting code error 678.
  How can I fix this error 678?
    
  Hello
  You can check this link:
  You may receive error 678 or error 769 when you try to connect to the Internet or when you try to browse the Internet after you install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/892889

• Unable to connect to other Windows 7 network devices - 0 x 80070035 and 0X80004005 error codes

  I have a network consisting of Windows 7 laptop computers, an XP laptop and a Wireless Linksys (Cisco) WRT610 N + N with storage attached to it via its USB port.  Your PC Windows 7 has, since I can see and access to other computers and devices on storage.  Since Windows PC B I can not connect (via the file manager) to A PC or NAS storage network.  Get such as 0 x 80070035 and 0X80004005 error codes when you try to connect to the IP address on the device name.  When I ping the devices of PC B I have no trouble to achieve.

  I turned off all firewalls, added the LMHOST file entries and a myriad of other tests and still cannot connect to PC B devices.  I can surf the net fine and do everything else - simply cannot connect to other devices even if these other devices can connect to me.

  I was in there for 22 years and has worked as an engineer on major networks and the network I stem - anyone got any idead. I checked all the basics such as Netbios, file sharing etc etc.

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• OSB connectivity error codes

  Hello guys,.

  In OSB, I'm trying to filter error codes that are associated with connectivity, which could be either inaccessible end system or internal services (proxy, Enterprise) or artifacts (jms, db, etc) not avaibale.

  Kindly help... Thanks in advance.

  I tested and finally I found these, let me know if you come accress other scenarios.

  Not available		Error code
  JMS QUEUE		BEA-380000
  JMS_TOPIC		BEA-380000
  HTTP		BEA-380000
  PS LOCAL		BEA-382601
  BS PREMISES		BEA-382601
  DB		BEA-380002
  File		BEA-382500
  AT·		BEA-380002