Error code: 1722 and 1603 when the Installation of FSX
I recently had the opportunity to uninstall FSX and trying to re - install the error messages above were almost at the end of the installation. Since then, I installed FSX demo version without problem and tried to re - install the full version of FSX with the same result. I use Windows 7 Premium. I also ran FS2004 without problem. Please notify.
I have found the answer! I chatted with Microsoft technical support. Try this:
When you try the knowledge base article, you will need to run as administrator command prompt.
I took my computer would do that since there is only one account of user and it's me, running as administrator.
This does not work with the command prompt.
Then...
When you go to start-> Accessories, do a right-click on the command prompt and "run as Administrator"
Now follow the rest of the article in the knowledge base, and she must remove the token.
Reinstall and voila!
Good luck!
Tags: Windows
Similar Questions
-
Missing Windows Installer, updates are back with the error Code 80070641 and 641 of the Code
My count started with windows update issues. My updates come back with Code and 80070641 Code error 641But when I went to check my windows installer, I couldn't find the file. I tried to restore before I had the problem with no luck. Also, I tried a lot of wany to try to find the file. Any suggestions?
See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-codes-641-and-80070641-net-frame-sp1/874c45b5-9446-457a-b0f1-44bbbcdb8517
-
error code 646 and 643 when you perform an upgrade to windows.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
http://www.Microsoft.com/downloads/en/default.aspx
Put the KB numbers in the search on the link above and do a manual download of each of them.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/923100/
When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If above does not solve it:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Error code 0 x 80070490 during the installation of service pack 1
* Original title: HELP
desperately trying to update my leptop with service pack 1 for vista home B.
downloaded service pack 1 manually, but for only error code0x80070490.se
Help:)Hello
Please follow the steps mentioned below and check if it helps.
Method 1: Run System File Checker
Scan system file checker on the computer that solves the problem with the system files. You can check the link for the steps below: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:http://support.microsoft.com/kb/929833
Method 2: Run the system update tool
Run the tool update of the system from the link below: Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2: http://support.microsoft.com/kb/947821
You can also check: you receive an error code '0 x 80070490' when you use Microsoft Update or Windows Update Web sites to install updates: http://support.microsoft.com/kb/958044
I hope the information is useful!
-
Error code 0 x 80092003 during the installation of customer of GFW
have been trying to install the client GFW, but continue to go to the installation failure: error code 0 x 80092003. Ive run as administrator and I have windows update, but it will not complete the installation. Someone knows how to solve?
Original title: Error Code 0 x 80092003
Hello. I had the same error just a few minutes ago. If you go to control panel of configuration, security, and firewall, you should be able to disable your firewall. When you have it turned off, run the install.exe and it should work. Let me know if it does, as it has done for me :D
-
Error code 0 x 80070078 during the installation of the games on the Store
Original title: Error Code 0 x 80070078
I selected a free application of games from the store, but when I try to install it I get the above error Code... How can I overcome this.
From:
Games installation - error Code 0 x 80070078
When I try to install applications of games from the store, they will not do and produce the error Code 0 x 80070078.Hello.
I have an installation by passage of Win 7 Ultimate to Win 8 Pro (x 64) and I have the same problem too, for new applications and updates already installed apps (so now I can't install or update any app store).The convenience of the App store and the clean boot method did not at all, as well as from local to the Live account and then back again at the local level.In addition, some standard applications now hang on the launch (for example the weather, news, sports and finance).I don't want to reinstall my PC from scratch or to do something that could uninstall/remove any program (it would take ages to save data and reinstall everything): there must be a solution to correct the error without it...I saw him in-> Logs-> Application Windows Event Viewer, some connected messages related to the error 0 x 80070078. Here is an example of such messages (hope it helps):Bucket-919441196 of error, type 5Name of the event: WindowsUpdateFailure2Answer: No availableCabin ID: 0Signature of the problem:P1: 7.8.9200.16449P2: 80070078P3: 4B0F4C28-724E-4542-9E9B-BCB02AD3B209P4: installP5: 101P6: unmanagedP7: 80070078P8:P9:P10:Attached files:These files are available here:C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_7.8.9200.16449_1734bcfe8ee012c2d4f3edac4f7d1d097d72999_20ea4cba(see line dotted to the contents of the file)Symbol of the analysis:Recheck for solution: 0Report ID: 13080cea-3997-11e2-beb4-000272ada7f9State: 0Bucket Hashed: 5aafd1d62278fc121d30d2318cee3f8c- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Version = 1EventType = WindowsUpdateFailure2EventTime = 129986067895057042Consent = 1UploadTime = 129986067895527103ReportIdentifier = 13080cea-3997-11e2-beb4-000272ada7f9Response.BucketId = 5aafd1d62278fc121d30d2318cee3f8cResponse.BucketTable = 5Response.LegacyBucketId =-919441196Response.Type = 4SIG [0]. Name = ClientVersionSIG [0]. Value = 7.8.9200.16449GIS [1]. Name = Win32HResultGIS [1]. Value = 80070078GIS [2]. Name = UpdateIdGIS [2]. Value = 4B0F4C28-724E-4542-9E9B-BCB02AD3B209GIS [3]. Name = scenarioGIS [3]. Value = installGIS [4]. Name = SourceIdGIS [4]. Value = 101GIS [5]. Name = environmentGIS [5]. Value = unmanagedGIS [6]. Name = LastErrorGIS [6]. Value = 80070078DynamicSig [1]. Name = OS VersionDynamicSig [1]. Value=6.2.9200.2.0.0.256.103DynamicSig [2]. Name = locale IDDynamicSig [2]. Value = 1033State [0]. Key = transport. DoneStage1State [0]. Value = 1FriendlyEventName = Windows Update installation problemConsentKey = WindowsUpdateFailure2AppName = host process for Windows ServicesAppPath=C:\Windows\System32\svchost.exeReportDescription = A Windows update has not been installed correctly. Send the following information to Microsoft can help improve the software. -
I think this are problems, but here is the separately questions, first of all - the basics:
4 PC network using the working group with two Windows 7 (ultimate) and two xp. Everything worked fine with the a previous vista / xp 3 network. All except the Windows 7 Desktop behave well. The network is connected with a modem cable to a 5XT netscreen NS (firewall hardware to the outside and the inside hub), a netgear wireless access point and Windows workgroup use (as mentioned above). Name all is correct on all machines, all the discovery settings are in place and each has Norton Internet security for its local protection services. Upgrades of Windows 7 have been computer vista laptop connected wireless and wired desktop previously running XP Professional sp3. XP conversion was assisted on the desktop of the wizard upgrade Laplink PC Mover. Applications executed in appearance on the two level computers.
On the desktop - I can't share printers. When I use "networks and printers" in the start menu to share on a printer I get code 0x000006d9 error saying something like the configuration cannot be saved. All local jobs printing works well.
On the desktop - the name of the computer records also of all as on the network (it is discovered and mapped by each PC) but when I try to access it from any other machine I get a general error says something like "check your spelling of the name mannequin." This desktop computer Win 7 can browse shared folders on the network of and write about everything. Somewhat added data - this device can ping all others in the network sucessfully but none get a ping successfully into the offending machine either with ip address or computer name (times out waiting for a response or said the name is not found). He himself can ping successfully. It accesses the internet very high hand.
Solutions have been attempted without a firewall (Firewall Norton Smart Internet - 2010), with the firewall and various changes to authorization. A final discovery was that Windows Firewall will not allow because BFE is not able to start - error 5 - access denied (this was discovered by train to allow a possible solution because of some internet chatter that the Windows Firewall must be running to implement shared printers). All other dependencies are running to get a break on why BFE is not (it turns on the Win 7 laptop as well as the firewall). Authorizations have been verified in the registry for settings of firewall and BFE (ports, permits, etc.) have also been looked at with a very critical eye. SFC has been run with no problem. All ports for net drivers, Win 7 networking and other actions are open in the firewall.
Then people - I did some internet research and I tried a lot of suggested solutions nothing doesn't. My apologies in advance if a person provides a solution and I say "tried". Any help is very appreciated
You can mark this as resolved problem!
The program involved, causing this error is firewall Windows, here is what you need to do to fix this...
If like me you have disabled windows firewall, I use Security Suite of ZoneAlarm, you will need to re-enable the firewall to share the printer.If you have disabled or turned off the Windows Firewall. (and in my case this error was caused by exactly that)
Step #1 - disable any other firewall can be installed. Stop to load at startup and restart your PC.Step #2 - go to the tools of Admin folder > Services > Windows Firewall > double click and is it set to manual or automatic and keep it.
Step #3 - open Control Panel > system & security > Windows Firewall > enable or disable the Windows Firewall > (Enable) turn on the Windows Firewall > save
Then go to Restore Defaults > click on restore default button > save
(you only do this IF you have changed the settings of the firewall, but it is always a good idea and will ensure that there are no problems during the proceeding)Step #4 - click Control Panel Home > view devices & Printers > Select / click on your printer > screen printer properties > share > share this printer > OK
Step #5 - go back to firewall Windows and the tower he walks back > save
Step #6 - go back to Services > and the Manual value Windows Firewall (or turn it off if you want, I recommend the manual)
Step #7 - reboot and re-enable your firewall preferred to start at startup > Reboot
Step #8 - take a deep breath and sigh of relief! :)
-
Error code 0 x 8004072 during the installation of Microsoft Flight Simulator
Original title: Dave
I'm under Windows8.
Previously, I had Microsoft Flight Simulator installed successfully.
Following some automatic windows updates to Flight Simulator, stopped working.
I uninstalled then reinstalled but received the error code 0 x 8004072 and instruction GameuxInstallHelper dll could not be opened.
Research of the computer for this dll has revealed that it was not present on my machine.
I downloaded this file from a web site and no longer have error messages, but not Flight Simulator has completed loading, there is no exe. file.
What can I do about it?
Hello
Naman.R
At a somewhat later time, checks the file of Microsoft games on my PC, the search in the folder FSX FSX.exe had reappeared, I noticed.
By clicking on, a window informing me that the installation continues.
Once this is completed, Flight Simulator was fully operational again.
Re-install the drive of the accelerator also progressed well, and everything now works perfectly.
I can only assume that something I did while following your advice has eliminated the problem.
Want to know the final outcome of the thought.
Much thanks
Dave.
-
Error 0x80072efd, 80070005 and 800F0922 during the installation of Windows update.
Original title: impossible to install the latest updates of Windows 8 or access certain applications
I got my Lenovo Y50 for a month or less. I'm happy with it, but recently I went to open the app store and receive 0x80072efd error message. I did a lot of research on these subjects and tried many things before asking my question, so here's what I know:
It seems than most of my other applications that require an internet connection doesn't work-weather, hightail, Bing news - but Internet Explorer only and all programs of office work.
I'm on Steam frequently and recently I get error code-138 on any page other than my inventory, but I can access my account and the information very well on a browser. I guess that this is related to my network problems.
I have downloaded and run software troubleshooting twice and failed twice.
When I went to update my story, I found that all my automatic updates didn't start a week ago. I did a manual update and got the 80070005 error messages and 800F0922.
I thought that my PC had been updated when I stopped it, because he used "Please do not stop your computer while it is up to date...". 1 of 12 "routine. I thought that the problem could be that I had not all bleached programs, so I closed all the possible applications and restarted. He said, it has been updated as usual, but when I went back to my history of editing, he always showed he didn't.
I made sure my firewall was not blocking applications or software update. I made sure that I have an internet connection. I did so that I do not use a manual proxy configuration. I made sure my Microsoft account is verified. I even ran a code a few people posted on another thread. I think the only thing I didn't try was temporarily disable my firewall. I'm sorry to start a new thread about this, but I have not had much luck fixing the problem.
Hello
I appreciate the efforts to try to solve the problem. Please write us with the following details.
Your computer is on a domain or network?
The code error 0x80072efd indicates interruption between your computer and the Windows Update server. I suggest you follow the steps below, check if it helps.
Windows Update error 0x80072efd
http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-Error-0x80072EFD
For error 80070005 and 800F0922 I suggest you to follow the steps in the link below and check if it helps.
Error 0 x 80070005 in Windows Update when you try to install updates
http://support.Microsoft.com/kb/968003
Windows Update error 800F0922
Write to us at the State of the question. We will help you.
-
I get an error code 0 x 80240036 during the installation of Windows Update.
had a crash re - installed windows XP Pro, then I tried to download all updates and got this error > error number: 0 x 80240036
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.Help!Original title: had an accident re-installed windows error number: 0 x 80240036Hi txcatsmeow,
Windows update no longer works if you don't have XP SP3 installed. To check your system service pack level, click on start, run and type "Winver" in the Run dialog box and click on 'OK'. If your system already has XP SP3 installed, you can try to reset the windows update components using the link below.
There are prerequisites for the installation of Windows XP SP3. You can find them by reading the link below.
Steps to take before installing XP SP3
http://support.Microsoft.com/kb/950717
How to reset windows update components
http://support.Microsoft.com/kb/971058
If your system does not already have SP3 installed, you can:
Download and install XP SP3 fron the link below. (Ignore the warnings on THIS subject the professionals and network facilities).
Windows XP SP3.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
Windows XP SP2.
http://www.Microsoft.com/en-US/Download/details.aspx?ID=28
If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.
How to troubleshoot a SP3 Installation fails.
http://support.Microsoft.com/kb/950718
Let us know if this is useful to provide feedback. Good luck.
-
Error code 0 x 663, when the update of Silverlight (KB982926)
PC tried to update of Silverlight (KB982926) via automatic updates whenever it stops - this has happened for two weeks and it fails every time. Displayed error code is 0 x 663. It becomes a little embarrassing now and I would like to know how to do the tri - am not technically conscientious, answers Yes in classic English, not 'talk of PC' would be appreciated! Thank you.
Hello
Sliverlight requires Visual Studio 2010, except if you use for development.
Where have you tried to install from? Visit http://www.silverlight.net/
-
Receive the error code 0 x 80070001 with the installation of Windows 7
I have all new components IE the motherboard and hard drive, in addition to a cpu, I can't seem to get the windows 7 to download correctly anyone with ideas on what might give me a shout out if you please let me know something
* original title - trying to install 32-bit windows 7 error code 0 x 80070001 crazy me anyone who has an idea *.
Hi vonsnap,
Please see the post below with a similar problem and fix possible:
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Error code 0 x 80240437 during the installation of the applications.
I have Windows 8.0 and I'm trying to upgrade to 8.1 ad also install applications
and I get an error code 0 x 80240437. I don't know what that means. How
can I fix it?
A few suggestions/FixIt: http://support.microsoft.com/kb/836941/en-us
-
I never put my laptop to play on an external monitor. Why this new software of computer/Toshiba DVD thinks I want him to play here? How can I change the setting on the laptop?
Hi GrettaYoung,
To better understand the question, please provide the following information:
(a) when you get this error message? What is you receive the exact error message?
(b) are what DVD software you referring? If it works well before?
The following steps are worth to try, run the fixit available in the link below to clear multiple configurations
How can I delete multiple configuration monitor to a computer that is running Windows Vista?
http://support.Microsoft.com/kb/934552Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Vista - Error Code: 0XC000000D (black screen after the installation of update)
Original title: blocked Vista patch
Patch Vista landed on black screen
message on the screen
"0xc000000d" registry/40015/55341 (thing)
It's the August updates, sorry I have no idea who would be KB. This is on a Dell Latitude D630 laptop. Auto repair did not work and States that there is in a slump.
Any help in this would be very appreciated
Hi RickL123,
What is you receive the exact error message?
Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.
If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.
Step 2: start the computer in last good known Configuration (and also in safe mode). To do this, follow the steps below:
Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the boot advanced options, select last good known Configuration-Safe Mode
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Step 3: You can follow the steps mentioned in the article below, which deals with a similar question
Your computer may freeze or it may restart to a black screen that has an 0xc0000034 error message after you install a service pack for Windows Vista
http://support.Microsoft.com/kb/975484
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I want to delete all the files on my macbook pro
-
Tengo una lectora recorder cd/dvd Super Writemaster speed marca, to borro el driver del device no tengo manera volver an instalarlo, por ello than I need help remota...
-
Install XP error Stop: 0X0000000A
Stop: 0X0000000A occurs when windows tries to access a particular too memory address high a process internal request level.hat do you mean? I have not correctly this part * original title - troubleshoooting windows xp installation *.
-
My laptop came with a program called Vongo I have not cared for and tried to uninstall. Somehow, I did something wrong, the file was deleted, but now whenever I start a windows session, it tries to install the Vongo program. It has no side effects, b
-
my model of dell's vostro 3450. I want to play nfs rivals. but I can't do that. because I need a graphics card latest updated driver to play this game. should what version of the graphics driver I install to support this game.