Error code (51) of attachment in Event Viewer

Similar Questions

• Get the error code: 0 x 80041003 in Event Viewer. Events cannot be delivered through this filter until the problem is resolved

  Original title: - what the heck is - this?

  Can someone tell me what this means - in English?

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I get this topic once per hour in my diary of events 'Application '.  The Source is: Microsoft-Windows-WMI and the event number is: 10

  Every word is understandable and I know what they mean, but how they are threaded and beat me to the syntax.

  Bill

  Thanks for the reply, Gerry.  I'm no stranger to computer, having started in 1962 in the Navy for 20 years.  The HD is fine.  I used the Hitachi software testing to verify this.  RAM is also fine after running MEMTest for about 17 hours.  CHKDSK shows up at all no error.

  I agree it could be caused by a hardware fault and looking for that I ran some tension and trials of O-scope on the motherboard.  The only discrepancy I found was Aida64 Pro told me that the 3.3V rail was only 1.75 v.  My DS was told that the rail was 3.327.  This led to the conclusion that maybe the sensor was messed up.  I have an almost identical computer with a motherboard in the same series and Aida reports that rail even as 3.319v.  So, I think that the motherboard may be offset slightly.

  The re - install is an easier way to remove a large number of applications I just didn't need more and had not touched in over a year.  Revo even would have struggled to clear the registry after such massive uninstall.

  I found that the results from a command prompt is quite easy if you issue the command once, read the results on the screen, and then do it again but to redirect the output to a text file ("' do_whatever > test_output.txt '").  All you have to do is cop0y and paste a post.

  This re - install and the subsequent installation of SP2, seems to have solved the error of the event: for now.

  Bill

• error code 1 occurs with the construction of the .exe (problem VI) attached

  The problem that I have been with a particular project was published several times by others.  I read through many threads related to this (or rather related to it).  I tried some things but not all.  I finally started turning off sections of my code to see if the error disappeared.  I have followed the attached VI.  The error code is also attached.  Can someone analyze this VI and see what might be the problem?  It uses .NET objects, so I don't know exactly what the compiler is looking for.  I would point out that this isn't my VI, but the one I copied from the forum here.  As far as the e-mail, the VI works very well in development mode, but obviously I desire a standalone application.

  Also note that I have created a new project and dropped this VI on the first level VI and he built a .exe very well, which makes no sense to me. Maybe someone can shed some light on this issue.  When I tried to return to the initial project, it doesn't have the build.  If you have disabled all instances of this VI in my project (using a diagram to disable), generates the project without an error.  Thanks in advance for your help.

  Reese

  Well, I found a solution, but I still don't know why the original VI would not build in my application.  I just created a new VI copied each code section of the original, little by little, build and then copy some more until all has been copied to.  It built without error every time.  It's a head scratcher, but the only thing I can think is, given the original VI was not my code, there may be a current compatibility issue.  But even once, he worked in a new project, so I'm not sure.  The lesson that I learned from this (and I know better), is not to wait until the end of your project in order to perform a build.  Lesson learned!

• Error code: Word 0x52F Viewer UPDATE

  I get the error Code: 0x52F for a critical Word Viewer UPDATE.

  Can find no solution - the error code is not given...

  What is the problem and how to fix...

  Thank you...

  Update fails because the update cannot find the original installation files.

  Unintall the Word Viewer and reinstall:

  http://www.Microsoft.com/en-AU/Download/details.aspx?ID=4

  Then run the update.

• I received this error 252 times according to Event Viewer

  This error came from 252 in my event viewer.  What is - this, and how to solve?

  
  

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  Regarding the error where the Viewer is concerned this page could help.

• Event viewer errors

  I had the best ever win 7 own reinstalling.

  not an error or a warning,

  but event viewer shows me 85 errors and warnings. WHY?

  Hi Louise,.

  Thank you for joining Microsoft Community!

  According to the description, it looks like you get errors in Event Viewer in Windows 7.

  However, we need more information about the issue to help you better.

  Please help me to answer these questions.

  1. What are the errors you get in spectators of the event?

  2 have had any changes made to the computer before the question?

  I have a few links that should help you to describe the information about the errors in the event viewer.

  Visit these links to learn more about Event Viewer.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Using the windows-related issues feel free to post here at Microsoft Community.

• Errors are displayed in the event viewer whenever I'm pass user

  Greetings.

  I just installed Windows 8 on my PC and noticed a strange thing. I have 2 local accounts on my PC, and whenever I am pass between them an error message popping up in the event viewer.
  It's always the same:
  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.
  And details:
  
  
  -

  -

   

    10016

    0

    2

    0

    0

    0 x 8080000000000000

   

    1301

   

   

    System

    PC

   

   

  -

    application-specific

    Local

    Activation

    {D63B10C5-BB46-4990-A94F-E40B9D520160}

    {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

    NT AUTHORITY

    SYSTEM

    S-1-5-18

    LocalHost (using LRPC)

    Not available

    Not available

  I don't see anything wrong in the behaviour of my OS, but these consistent errors in Event Viewer makes me worry a little.

  What could be the cause of the problem? Is it possible to fix it?

  Hello Andrei Kharitonov,

  1. How did you install to Windows 8?

  2. who was the older version of Windows installed?

  Let us try these methods.

  Method 1.

  I suggest you run the utility for troubleshooting Microsoft accounts from this link and check the status.

  http://Windows.Microsoft.com/en-us/Windows-8/create-user-account

  Method 2.

  The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions. To run the System File Checker, you'll need open an elevated command prompt. This can be done:

  • Enter the start screen
  • Press Windows + C keys on your keyboard to show the charms. (If you use a touch screen: touch the right edge of the screen and slide your finger to the center of the screen to display the bar of charms)
  • Click on search
  • Type the command prompt in the search field
  • Click with the right button on command prompt (if you use a touch screen: touch and hold your finger at the command prompt, drag your finger downwards until you see an outline around the tile and finally release your finger on the screen.)
  • Click on run as administrator

  Enter the command: sfc/scannow
  Note: If you use a touch screen you can open the touch keyboard for the command prompt by typing on the keyboard icon in your taskbar near the system tray.

  Let us know if you need assistance with this problem of Windows. We will be happy to help you.

• error code message appears not

  Hello

  I tried to create a set of labview error codes codes using the tools-> edition of error codes.  Has created some test errors and saved the file

  C:\Program NIUninstaller Instruments\LabVIEW 2009\user.lib\errors

  The file called test - errors.txt appears as follows:

  
  
  
  First file of Sean error code
  
  
  Unstable device
  
  
  Unstable critical apparatus
  
  
  Press Stop or device will begin the countdown to destruction
  
  
  Destruction began the countdown, all organic life will be destroyed with a radius of 2 miles in t - 10 minutes
  
  

  

  Then, I designed a simple VI to test the error codes, see the attachment.  However, the error message do not appear in the error on the source area.

  Does anyone know why LabVIEW is not recognizing my error codes?

  Rgds,

  Sean

  David,

  The data cluster error type may not contain the actual description of an error.  When an error is generated, only the cluster of error data will be the error code, status and source.  The source must contain the path calling of the VI that generated the error, not the description of the error.  It is recommended to use the VI Simple or General Error Handler to programmatically display the short description of the error.  If you want to interactively view the description you can right-click on a cluster of error control or indicator and select 'explain the error.

  Chris M

• HCPP Event Viewer

  I get this error message when I open the event viewer on CSPM. It happened when I updated the last signature on JOINT to S33 Version 3.0 (5).

  "New DbEventCallback, eventStreamConsumer--> reading failed.

  "newDbEventCallback, error caught in the catch block.

  I used the cvtnrlog.exe command to clear all entries in the database in the hope that this will help, but the problem seems not to get out. No matter who or what this error message and have the solution for this? Any help would be much appreciate.

  It looks like your database might have gotten corrupted.

  Open CSPM and go to file - export and save your current configuration to a file somewhere outside the CSPM .cpm

  directory structure. Close the CSPM. Now go to start - programs - Cisco Systems - CSPM - Troubleshooting Toolkit.

  the strategy of Restore Database press the button tab restore and wait the 4 boxes themselves. Open now

  CSPM again and he will come to the top with an empty database. Go to file - import and import the .cpm file that you just exported in. Delete the new user 'Imported' from the menu at the bottom on the left side and make a backup/update and see how it goes.

• SMART short Self Test Failed - (error code: WHD16-8NR)

  Hi all

  I had my XPS L520X for 4 years and 2 months. I've never had a problem with its operation until last week. Randomly, it restarted and came with the PCI Realtek issue when it restarts.

  To cut a very long story short Fault find it which is going on, I reinstalled the entire operating system, including formatting of the hard drive.

  The problem of the laptop different freeze/crash and reboot with erros while doing normal tasks has not been resolved.

  I have run the Dell support center software and it shows the auto SMART test failed with the following code (error code: WHD16-8NR).

  Event log:

  Dell Support Center log file
  March 17, 2016 16:53:55
  Overall result: failed

  -------------------------------------------------------------------------------------------------------------------------------------------
  ST9750420AS [ATA:0:0\\?\ide#diskst9750420as___0005dem1#4&34e0611c&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b]}
  -------------------------------------------------------------------------------------------------------------------------------------------

  Seller: Seagate
  Model number: ST9750420AS
  Serial number: 6WS100EG
  Firmware revision: 0005DEM1
  Size: 698,6 GB
  Rotation speed: 7200 RPM
  Cache size: 16 MB
  Temperature: 43 c
  Physical sector size: 4 KB
  Logical sector size: 512 B
  Count of logical sector: 1465149168
  Supported standards: ATA8-ACS, ATA/ATAPI-7, ATA/ATAPI-6, ATA/ATAPI-5
  Specification Version: Rev ATA8-ACS 4

  ----------------------------
  OS - C: [PARTITION:C\\.\C:\]
  ----------------------------

  File system: NTFS
  Volume serial number: 5087-8802
  Volume capacity: 679.00 GB
  Amount of free space: 568,63 GB
  Volume space used: 110,37 GB

  Test of the SMART State

  Test started - 17/03/2016 16:43:57
        
  Finished test:-17/03/2016 16:43:59
  Past

  Test of SMART thresholds

  Test started - 17/03/2016 16:43:59
        
  Finished test:-17/03/2016 16:44:01
  Past

  Targeted reading test

  Test started - 17/03/2016 16:44:01
        
  Finished test:-17/03/2016 16:44:05
  Past

  Try to search randomly

  Test started - 17/03/2016 16:44:05
        
  Finished test:-17/03/2016 16:44:54
  Past

  Funnel Seek Test

  Test started - 17/03/2016 16:44:54
        
  Finished test:-17/03/2016 16:46:14
  Past

  Short what SMART self-test

  Test started - 17/03/2016 16:46:14
        
  Error message:-17/03/2016 16:46:24
  The unit has reported the following State: the previous self-test completed having the read element of the test failed.
  Error message:-17/03/2016 16:46:25
  The first default LBA value is 121243744 and the failure occurred after that the device was working since 8792 hours under tension.
  Finished test:-17/03/2016 16:46:26
        Failed (error code: WHD16-8NR)

  Surface Scan Test

  Test started - 17/03/2016 16:46:26
        
  Finished test:-17/03/2016 16:47:25
  Past

  Surface Scan Test - 2

  Test started - 17/03/2016 16:47:25
        
  Finished test:-17/03/2016 16:48:58
  Past

  I also went in the BIOS BOOT MENU by pressing F12 at startup and ran diagnostics that seemed to have said everything going, however I saw a mistake, faliure in its process that was too fast for me to write the error.

  In a nutshell, my thought is that my hard drive has failed / is corrupted or is about to fail.

  My simple question is, do I need a new hard drive with the information I've provided?

  Thank you very much!

  To all those who read this topic:

  I rang Dell directly and they confirmed my hard drive needs to be replaced.

  8792 power over time, I think that its actually me good.

  Bravo and thanks for the reply ejn63

• When you try to update I get an error Code: U43M1D207

  Hi team,

  I can't update Photoshop CC. I have tried a few several time and reistalled CC in Photoshop. But still the problem exists.

  Here is the message

  "

  Adobe Photoshop 14.2

  There was an error downloading this update. Quit and try again later. " Error code: U43M1D207"

  Attached to the image for references

  Hello

  It seems that question comes from the corrupt downloaded version of update.

  Restart your system and try to update again.

  Kind regards

  Ashutosh

• How to fix a client SSL key private credential error code in the event viewer

  Hi people,

  I hope someone can help. I am currently using Windows 7 Professional 64 bit, updated with the latest updates from Microsoft.

  I get the following error message, ()every 5 minutes exactly) in the Event Viewer administrative, computer management.

  "A fatal error has occurred when trying to access the private key SSL client credential." The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10003 "

  It began on October 14, 2014. There are now more than 40,000 of the codes of this edition.

  A sample of the log data is as follows;

  Log name: System
  Source: Schannel
  Date: 18/10/2014-20:54:40
  Event ID: 36870
  Task category: no
  Level: error
  Keywords:
  User: SYSTEM
  Computer: AP1
  Description:
  A fatal error occurred when attempting to access the private key SSL client credential. The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10003.
  The event XML:
  
   
     
      36870
      0
      2
      0
      0
      0 x 8000000000000000
     
      133003
     
     
      System
      AP1
     
   
   
      customer
      0x8009030d
      10003
   
  

  I looked at all the suggestions online and have found nothing of what is specific to this problem for windows 7 and how to solve it. I would be grateful if someone could guide me in the way to solve the problem.

  Thanks in advance.

  Tom

  Dear Isha,

  Thanks for your follow-up. After spending considerable time on the issue, I stopped just by using the function of collective housing, which heals many error codes. It is redundant to a standard network configuration and is not worthwhile. Since Windows 10 deletes the function of group living, I'm not sure that I need to spend time on this...

  I have also had also removed the bad machine key and senior partners of information in the directory of network of peers, which seems to have solved the problem.

  Thanks for your thoughts.

  Tom

• Where in the event error Codes BSOD Windows XP store Viewer

  As the title States where Windows XP Professional SP3 with 0 x 86 stores the error logs when a blue screen happens? I can not find I checked in the system log, but could not yet identify the BSOD error codes. I activated to connect with these error codes when it occurs.

  Can someone tell me where to find the error codes to stop Windows (BSOD)? Also, if you can describe what the entry will look like it should help.

  Thank you

  Victor

  VM

  You have several questions.

  1 - this one accident was linked to Redlight. sys with description BufferZone Kernel Module is a driver file of the BufferZone belonging to BufferZone product company.  That needs to be removed (at least for testing)
  
  2 - cumon
  Associated cumon.sys driver filter system provider (R) Win 7 kit Windows DDK CRCMon (it's a minor issue)

  3 - cmuda.sys related to cmuda.sys C-Media Audio Driver (WDM). YOURS IS 2002

  How to find drivers:

  
  -Google search for the name of the driver
  -compare Google results with what is installed on your system to determine on what device/program, it belongs to
  -Visit the web site of the manufacturer of the hardware or program to get the latest drivers (do not use Windows Update or Device Manager Update Driver function).
  s ' there is difficult to locate them, post back with questions, and someone will try and help you find the right program

  The most common drivers are listed on this page: driver reference

  http://www.carrona.org/dvrref.php

  http://SysNative.com/drivers/

  -Driver manufacturer links are on this page: http://www.carrona.org

• DEFAULT DOWNLOAD EPG IN WINDOWS VISTA MEDIA CENTER ERROR ON ERROR CODE: MC EVENT VIEWER CODE 0 13.

  No not someone arrive at a viable solution for this yet? I had this problem for about 6 weeks and tried all of the solutions that I can find with no luck. I think that now it is linked to an update of Windows but which when I certainly don't know.  When I do a system clean reinstall the EPG download will temporarily (I did twice now) but after just a couple of updates and when Windows update has done been thing guide refused once more to download. How the world would be a person understand this because when I do reinstall the system there are about 150 updates waiting to download?

  Come on Microsoft Engineering people must certainly be a solution to this problem if anyone cares enough to explore the substantive issue. It seems that there are many, many others having the same problem.

  The old post of 2006 has an explanation detailed on the error code 13 and the same thing applies for Vista too, this is why I mentioned this one.

  I understand your frustration. The problem is essentially due to firewalls or things of internet security or antivirus interference.

  http://Forum.wegotserved.com/index.php?/topic/2676-guide-dowload-error-code-13-Vista-users came up with a solution. Does that help?

  Try the other suggestions too.

  S.Sengupta Media Center MVP

• I often get this error in my system event viewer: IO_WARNING_PAGING_FAILURE?

  This often appears in the event viewer

  original title: is this a problem I should correct IO_WARNING_PAGING_FAILURE?

  Hello

  1 are. What is the exact error message or error codes you getting?

  2. what operating system is installed on the computer?

  3 are you facing problems on your computer?

  4. don't you make changes to the computer until the problem occurred?

  Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  (For Windows Vista)