Error code 652 - Silverlight Update
I tried to install an upgrade recently downloaded for Microsoft Silverlight (KB979202) and coming up with the error code 652.
I am running Vista Home Premium
Any ideas?
Van11,
If you still experience this issue, then try unintsalling Silverlight and re-install. Then run Winows Update and see if it installs. Let us know the results. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!
See the section "How to get help", for example, http://support.microsoft.com/kb/927978
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
When you install an automatic update. I received the error code 652. Have tried three times, always the error code 652. She tries to Miscrosoft Silverlight Update. need help
Hello
· Remember to make changes to the system?
Follow the steps mentioned below.
Step 1:
There may be some third-party software that runs in the background, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Once you have finished installing, follow step 7 to start the computer in normal startup.
Step 2:
Reset windows update components and check. Follow the steps mentioned in the article below.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058/en-us
Step 3:
See the article mentioned below.
Description of the update for Silverlight: September 1, 2010
http://support.Microsoft.com/kb/2164913
To get help after your query in the Microsoft Silverlight Forums. Click on the link below.
http://forums.Silverlight.NET/forums/
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error code 652 on Vista sp2 windows update
I get repeated error codes 652 on my computer laptop sp2 from Vista when I try to update windows. Problem just started this week with KB2416473, an update of safety for microsoft.NET framework. I have Registry Easy and tried to scan and clean registry, but this did not help. Can someone help me?
Please use the backups created by "Registry Easy" to restore the registry information that he deleted. And to see what the users of it have to say, please read their comments here -http://www.mywot.com/en/scorecard/registryeasy.com
If you don't know how to modify the registry manually and then using a registry editor to do is similar to the delivery of a firearm loaded at a 4 year old child.
Bad editing the registry by a registry to suspect "cleaner" can make the system unusable and cause a no start. Your only recourse at this point is a clean reinstall of Vista.1. download and Save the .NET Framework installation check tool
2. read the Guide to the user on the page above and to check the installation of .NET Framework 3.5 SP1 by tool
3. If it cannot be verified as being correctly installed, try to run a repair of programs and features.
Locate the .NET Framework 3.5 SP1, click once to highlight, and then click the uninstall/change link and choose the repair option.
4. If a repair operation has not resolved the improper installation of .NET Framework 3.5 SP1, then Uninstall it.
5. download and Save full .NET Framework 3.5 SP1 package-
http://download.Microsoft.com/download/2/0/e/20e90413-712f-438C-988e-fdaa79a8ac3d/dotnetfx35.exe
6 configure Vista to the boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
7 reboot the system for the State of clean boot and disconnect the internet connection system that's for now.
8. run dotnetfx35.exe by right clicking it and choosing "run as Administrator". Accept the UAC prompt to allow it to run high.
9. once .NET Framework 3.5 SP1 is installed, cancel the clean boot procedure, and then restart the system.
10. once the system has recovered to the normal mode of Windows, reconnect the system to its internet connection.
Allow all updates to install now.If do what above has not resolved the installation of KB2416473, then contact Microsoft for assistance in getting it installed.
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Expert MowGreen Windows IT Pro - consumer safety
-
Routine Windows Update on a 32-bit Vista SP2 from base system; Bing Bar 7.0 update (KB2505591) fails. Repeated with trys & w/o reboot always returns an error code 652. What now?
Please repost on forum Windows Update:
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=no
Here is an answer to a moderator of this forum. But I don't know if it applies to your situation. Take a look anyway. It will not hurt to try.
Justin, Engineer Support, moderator
Date: April 7, 2009. -
update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update
Hey lasdj,
Thanks for posting in the Microsoft answers site!
If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.
To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.
Therefore, remove the compression of the DATA directory and run together to the top again.
Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.
See the links below for more details:
Windows Update error 6d9e
http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9EInstall SQL Server 2005 and 2008 failures (compressed DATA directory)
http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspxI hope this helps!
Gokul T - Microsoft Support -
The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.
Hi Sarma_RN,
1. When you receive the error message?
2. update you are trying to install?
3. When was the last time you were able to install updates?
If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.
These errors can occur caused by one of the following problems:
- Applications or processes that interfere with Internet communications
- Problems on your computer
- Strong Internet activity
- Recoverable database errors
See the Microsoft article and try the steps mentioned below.
You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows Update error code 80072EE2. Update Windows Journal shows he's looking for a proxy in spite that the intenet access is direct. How can I find out Windows Update that I don't use any proxy? Proxycfg would probably help, but there are more with Windows 7.
Thanks to anyone who can help!
French Old Timer,
In addition to the information requested by PA Bear, take a look at this article and let us know if it helps.You may encounter temporary connection related errors
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I always install the update to my Windows vista through the automatic update system, but recently I encounters an error code 52D when updated security installed for mircosoft work 8 (KB973636). Please help someone... seem micrsoft don have send to asked but rather as a forum here... Please... wat to do...
Steve,
You have Microsoft Works 8 installed and you use it? If this isn't a program you are using or you thought it had been uninstalled and then run The Windows Installer Cleanup utility and see if you are able to completely remove the work. This would then cause the update will not be presented. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Update continues to not give me an error code "0000646 Windows update encountered an unknown error.
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Error code 800706BA 13 times KB970653, 973768, 958869, 954430, 974291 updates, etc., and the error code 40010004 for updated "Explorer 8 for vista 64. My Windows updates indicates 'NO updates to UPDATE REQUIRED' even though these updates failed. Where I can download them and how? Thank you
Hello
Error 800706ba Windows Update
http://www.instantvista.com/800706ba.htmlControl Panel - Windows Updates - click right on and HIDE
To download manually:
Download Center - mount the KBxxxxxx.
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=enThen run this:
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
If necessary, you can get free reports of incidents.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
I can't download anything I get error code 80072efe window update dt000
why I can not down load anything keep getting error code 80072efe window update dt000 can you tell me how to solve this problem, so I can down load updates
Ensure that there is no hidden malware that causes the connection to the update servers is abandoned.
How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?If no hidden malware has been detected, it is the first time that this error updated?
If the answer is Yes, then try reset components Windows Updates - How to reset the Windows Update components?
Download and save the Fixit on the web page above. Once the download is complete, close all open programs and browsers.
Now run MicrosoftFixit50202.msi and choose it is the default mode.
When he has finished to see if running Windows Update can search, detect, download and install the updates.If no joy, run the Fixit once more and choose it's aggressive mode.
Restart once it has finished running and see if the system can update now.If the system can always refresh not, then please copy and paste the last lines of 50 or more WindowsUpdate.log in your response - How to read the Windowsupdate.log file
-
I have the error Code: 2 for update my cloud and it won't let me uninstall it or anything
I have the error Code: 2 for update my cloud and it won't let me uninstall it or anything
Hi amanda,.
Please check the help below document:
https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.html
Kind regards
Sheena
-
I keep for error Code 1 what updated office creative cloud
I keep for error Code 1 what updated office creative cloud
-
Error code 800064C on update for Microsoft Silverlight (KB2416427)
Windows Update tries to install Microsoft Silverlight (KB2416427), each test always ends 800064 C error Code.
I searched MS Help Center for this error code, but found no reference.
My system is Windows 7 64 bit.
Edit, I also tried to disable the antivirus (Avira) before the installation, I always get this error code.
Edit 2: Components Reseting Windows Update did not help either...
Hi Amir Deutel,
1. have you tried to install the update manually?
First try to install the update manually and check.
See the links to download the update below:
http://www.Microsoft.com/Silverlight/
Description of the update for Microsoft Silverlight: 28 September 2010
http://support.Microsoft.com/kb/2416427
Also you can post your question in the Silverlight forum for further assistance:
http://forums.Silverlight.NET/forums/13.aspx
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
process of LSD causing 100% cpu and beachballing
Hi guys,. I hope someone can help me with this. My computer has recently started using 100% cpu on a process called "lsd". It totally freezes my computer and I have to hard start it again by pressing the power button. I can force him to do it is I
-
When I bought my dashboard I was under the impression, it could run chumby apps. I went to the chumby site and one of their most popular applications is iheartradio. I thought I could get this app, but I discovered it is not available to the dashboar
-
DMA2100 Wireless keeps resetting or disconnection
I have a dsl with built-in router n wireless modem. My guard dma2100 media extender find and drop the signal for some reason any. Them is not interfernace of the system as I tired of to move around the dma2100. I even got it 2 feet away routher an
-
the Windows media player 11 - media format 11 runtime is missing?
Hi, I have windows media player version 11 11.06, don't ask me how I have this version that I can't even download site of microsoft, but it seems that I'm missing media format 11 runtime, that would allow me to get the details of my cd on internet, h
-
It was recommended to me that I have change many registry key values to improve my performance of the system, but I thought that I could better get a second opinion on this before proceeding.These are the keys that have been recommended to change...(