Error Code 80240016 Windows Update.

Similar Questions

• update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  Hey lasdj,

  Thanks for posting in the Microsoft answers site!

  If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.

  To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.

  Therefore, remove the compression of the DATA directory and run together to the top again.

  Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.

  See the links below for more details:
  
  Windows Update error 6d9e
  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9E 

  Install SQL Server 2005 and 2008 failures (compressed DATA directory)
  http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspx

  I hope this helps!
  Gokul T - Microsoft Support

• The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.

  Hi Sarma_RN,

  1. When you receive the error message?

  2. update you are trying to install?

  3. When was the last time you were able to install updates?

  If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  See the Microsoft article and try the steps mentioned below.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/836941

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Important updates for Vista SP2 Security Installation failure: update MSXML 4.0 SP2 (KB927978) AND (KB954430) security, citing error Code 652, Windows Update encountered an unknown error!

  Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!

  See the section "How to get help", for example, http://support.microsoft.com/kb/927978

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft Update maintains did not give me the error code "646 windows update encountered an unknown error" __Help__Thanks in advance

  Windows Update continues to not give me an error code "0000646 Windows update encountered an unknown error.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I can't download anything I get error code 80072efe window update dt000

  why I can not down load anything keep getting error code 80072efe window update dt000 can you tell me how to solve this problem, so I can down load updates

  Ensure that there is no hidden malware that causes the connection to the update servers is abandoned.
  How to remove malware belonging to the family Rootkit.Win32.TDSS (aka Tidserv, TDSServ, Alureon)?

  If no hidden malware has been detected, it is the first time that this error updated?

  If the answer is Yes, then try reset components Windows Updates - How to reset the Windows Update components?

  Download and save the Fixit on the web page above. Once the download is complete, close all open programs and browsers.
  Now run MicrosoftFixit50202.msi and choose it is the default mode.
  When he has finished to see if running Windows Update can search, detect, download and install the updates.

  If no joy, run the Fixit once more and choose it's aggressive mode.
  Restart once it has finished running and see if the system can update now.

  If the system can always refresh not, then please copy and paste the last lines of 50 or more WindowsUpdate.log in your response - How to read the Windowsupdate.log file

• Error code 80072EE2 - Windows update searches for proxy while the Internet is directly (64-bit windows 7)

  Windows Update error code 80072EE2. Update Windows Journal shows he's looking for a proxy in spite that the intenet access is direct. How can I find out Windows Update that I don't use any proxy? Proxycfg would probably help, but there are more with Windows 7.

  Thanks to anyone who can help!

  French Old Timer,
  In addition to the information requested by PA Bear, take a look at this article and let us know if it helps.

  You may encounter temporary connection related errors

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code: 80072EFD Windows update on Vista Ultimate

  Windows could not search for new updates

  An error occurred when checking for
  new updates for your computer.
  Error (s) found:
  Code 80072EFD Windows Update encountered an unknown error.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Windows Update error 80072efd
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efd

• Error code dt000 windows update OxC800044e why?

  Windows cannot update code OxC800044e windows update dt000

  Windows cannot update code OxC800044e windows update dt000

  What security software you use, what service pack level you are currently at etc etc etc.

  Your question is why?

  Answer: 0xC800044E - WriteConflict - the write lock failed due to an outstanding write lock

  Reference:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-update-fails-to-run-and-get-error-code/01bf5d1e-1875-45CD-8fd5-7d504e07f55f

  Your security software's may interfere with the update process. Discover the Mowgreen answer about that.

  HTH

• I have two error codes on Windows update Code: 80240016 & an internal error has occurred in Ox80010108 during the installation of Service pack 1.

  Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

  Click here to show or hide detailed information

  Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

  If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process.

  How to obtain the stand-alone package for the service pack

  To obtain the service pack, see the following articles in the Microsoft Knowledge Base, depending on your operating system, and then look for the option to install the service pack from the Microsoft Download Center.

  935791 how to obtain the latest Windows Vista service pack

  968849 how to obtain the latest service pack for Windows Server 2008

  Solution 2: Run the system update readiness tool

  Click here to show or hide detailed information

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the How to download the system update readiness toolsection ".» If you are unsure which version your computer has installed, follow these steps:

  1. click on Start

  Collapse this includes this image

  .

  2. in the Search box, type System, and then click System in the programs list.

  Collapse this includes this image

  The operating system is displayed as follows:

  • For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.
  • For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

  Collapse this includes this image

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

  How to download the system update tool

  You can click here to download the preparation tool system update from the following Microsoft Download Center Web site. The following files are available for download from the Microsoft Download Center:

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Vista (KB947821) package now.

  Collapse this includes this image

  Download the update tool for Windows Vista x 64 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 (KB947821) package now.

  Collapse this includes this image

  Download the System Update Readiness Tool for Windows Server 2008 x 64 (KB947821) package now.

  Collapse this includes this image

  Download the system update for the systems Itanium (KB947821) package.

  After you download and run the system update readiness tool, restart your computer. Then, immediately try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:

  http://www.Microsoft.com/downloads

  For more information about the update of the system tool, click on the numbers below to view the articles in the Microsoft Knowledge Base:

  947821 description of the update for Windows Vista and Windows Server 2008 system preparation tool

  Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  During installation, one of the most frequent causes of failure occurs when a third-party application holds open a file or locks a file that the service pack installer should use. For example, an application third-party antivirus or antispyware may cause this problem. To minimize this risk, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:

  a. right-click on the icon of the third-party program.

  b. click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.

  3. as soon as you close the antivirus or the antispyware software, try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.

  4. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  If your problem is still not resolved, you can try the steps of troubleshooting on your own, or you can contact Microsoft technical support.

  Resolution 4: Uninstall security applications, restart the computer and then install the service pack

  Click here to show or hide detailed information

  Important These steps may increase your security risk. These steps may also make the computer or the network more vulnerable to attack from malicious users or malicious software such as viruses. We recommend the process that this article describes to enable programs to operate as they are designed for, or to implement specific program features. Before you make these changes, we recommend that you evaluate the risks that are associated with implementing this process in your particular environment. If you decide to implement this process, take additional measures to protect the system. We recommend that you use this process only if you really need this process.

  A third-party security application (for example, an antivirus application, a firewall, or antispyware software) can still be causing the installation fails, even though you tried to disable the application. The Windows Vista SP1 installation requires several restarts of the computer, and the security application may be reload after the first reboot. Applications that provide registry repair features may also cause the installation to fail.

  You can uninstall your third-party security application before you install the service pack. However, you should do this only if you are positive that you can reinstall the application as soon as the service pack installation is complete. To reinstall the third-party security application, you'll need either the original installation media for the application, or you need the original download. You may also need a product key to reinstall the third-party security application.

  If you are sure that you can reinstall the third-party application, uninstall the application from the programs and features item in Control Panel. To do this, follow these steps:

  1. close all applications and restart your computer.

  2. Once your computer has restarted, click Start

  Collapse this includes this image

  .

  3. in the find what box, type programs.

  4. click on programs and features.

  5. click on the name of the security program that you want to uninstall.

  6. click on Uninstall.

  7. After you have uninstalled the program, restart the computer.

  8. try to click here to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site.
  Note You have uninstalled your security software, and your computer is more vulnerable to attack by malicious users or by malicious software such as viruses. We recommend that you do not surf the Web, use e-mail, or use instant messaging, up to what you have done to solve the problem, and you have reinstalled your security software.

  9. After completing the installation of Windows Vista SP1, reinstall the security program that you uninstalled in the previous steps.

  * All of these resolutions were conducted, but still having trouble running SP1 & SP2. It's a problem of installation and after the installation of Service packs 1 & 2 times. I have a SYSTEM of 32-bit operating systems. KB947821 analytical TOOL has also been installed!, by following the instructions in res 2. Security / Antivirus has also been disabled in accordance with the instructions of res 3 & 4. Service packs Download but will not work!

  Get help the community?

  Hello DavidCarmichael,

  Thank you for your message.  I see that you have already run the system update readiness tool.  Feel free to skip step 1, but follow-up on the rest of the below troubleshooting steps:

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  Please let us know the results of each utility.  We can't wait to hear back on your part.

  See you soon

• Error code: 80072EFE Windows Update encountered an unknown error

  I get this message whenever I try to update I tried and tried to re-release day, but with no luck?

  Anyone know what I can do?

  Thank you

  http://support.Microsoft.com/kb/836941

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  When you use the Windows Update Web site or the Microsoft Update Web site to search for and install updates, you may receive one of the following error messages:

  Collapse this tableauAgrandir this table

  Error 0 x 80070008	Error 0x800705B4
  Error 0x8007000E	Error 0x80072EE2
  Error 0x80072EFD	Error 0x80072EE7
  Error 0x80072EEF	Error 0x80072EFE
  Error 0x8024400E	Error 0x80072F76
  Error 0 x 80244016	Error 0x80072F78
  Error 0 x 80244022	Error 0 x 80090305
  Error 0x8024402F	Error 0x8009033F
  Error 0xC80003FA	Error 0 x 80244008
  Error 0xC800042D	0x8024400A error
  Error 0x80071A90	Error 0x8024400D

  If the above does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• error code 80070005 Windows Update running

  Original title: error code 80070005.

  Last Friday, my laptop had a message saying Vista had stopped working properly and I had to install service pack 1 (even if this had been done just after buying 18 months ago), I did the install and now all THE updates have been removed from the computer and he said: he can't do windows updates the error code 80070005. can anyone help with this. Thank you

  Hey gordont,

  Error code 80070005 means generally that you're not quite allowed to install updates. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates.

  To resolve the problem follow the steps that are listed in the methods below in the order listed, starting with method 1.

  Method 1:

  Log the computer as an administrator or as a user with administrative rights.

  Method 2:

  One of the most common causes of this error code (access denied) is the Anti Virus and Anti Spyware software running on the computer. You can try to disable them, and then try the updates again.

  Method 3:

  Try to reset your default security settings.

  Reference:

  How to restore the security settings the default settings?

  http://support.Microsoft.com/kb/313222

  Method 4:

  Reset Windows Update components.

  See:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  This should be it.

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 80070026 Windows Update

  Remember - this is a public forum to not publish any private information such as phone numbers or e-mail!

  Ideas: When the update security for Windows 7 pour computer processor x 64 (KB2393802) several times = nominal code 80070026 failed WITH error Windows Update. This is an IMPORTANT update. Please FIND me a solution. I tried everything what I was offered help and support Windows and takes charge of en Windows but without result.

  • Problems with the programs
  • Error messages
  • Recent changes to your computer
  • What did you already tried to solve the problem

  You are currently on an English forum:
  http://social.answers.Microsoft.com/forums/en/w7security /threads

  A French forum might be a better place to ask your question:
  http://social.answers.Microsoft.com/forums/en/w7security /threads

  Alternatively you can edit your question in English.

• Error code 646 - windows update

  Until recently, the window updates were automatically installed.  However, recently the following message error Code 646.  Windows Update has encountered an unknown error.

  Until recently, the window updates were automatically installed.  However, recently the following message error Code 646.  Windows Update has encountered an unknown error.

  Hey Neenamurthy

  the microsoft link below contains a fix-it to solve this error code 646 and also a manual method

  http://support.Microsoft.com/kb/2258121

  If the above does not fix it

  It's an instance of vista installation

  the best forum for your question lies in the sub windows update forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Error code 646 Windows Update (photos included)

  I tried to update my Vista computer these last time but fault to keep updates, I get the message Code 646. Picture here: http://i846.photobucket.com/albums/ab29/Yozuru/screenerror.jpg

  Failure of the list:
  http://i846.Photobucket.com/albums/AB29/Yozuru/errorsnip.jpg

  List of important updates: http://i846.photobucket.com/albums/ab29/Yozuru/screenie3.png

  List of the optional updates:
  http://i846.Photobucket.com/albums/AB29/Yozuru/optional-1.PNG

  If more information is needed, I'll be happy to provide it.

  Hello

  Try to disable UAC and then make below.

  Panel configuration-Classic view - user accounts - turn User Account Control Off

  How to turn User Account Control (UAC) on or off in Vista
  http://www.Vistax64.com/tutorials/48893-user-account-control-UAC.html

  THIS UTILITY MAKES IT EASY TO

  http://www.tweak-UAC.com/
  Tweak UAC utility - easily put UAC into Silent Mode or POWER

  ------------------------------------------------------

  After the foregoing:

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.