Error creating page jssf in the stubborn workflow

Similar Questions

• Problems with the stubborn workflow

  Hi all
  
  I'm having some trouble with the stubborn workflow. I created the parameters of entry and exit on the workflow and I can't make them work.
  
  Version: 11.1.1.4
  
  Here is my scenario:
  
  1. I created a display on the adf-config to use as my home page
  2. I created two points of view on flows of different delimited tasks two (one for data on employees - a table and one to show the details of the Department - a form)
  3. I dropped two workflows bounded as areas on my main page
  4. I wanted to click on the employee in the area of the employee id and pass the service id in the region of the Department
  5. I converted my employee_id rank to a link and added property inspector set so that I could capture the value of line department id
  6 configure the parameters input and output both bounded task flows (the employee) and pronounce on the Department.
  
  
  However, the value does not seem to the Department defined in the workflow... or so it seems. I'm sure it's user error I'm not sure what I'm doing wrong.
  
  Any suggestions or advice would be appreciated. Are there good ways to see if the values of the parameters are ongoing value and actually passed (as step via the stream in any way and see if my #{pageFlowScope.) Param} is ready?
  
  Thanks as always!
  
  S
  
  Published by: Scarpacci on March 14, 2011 23:12

  I guess you need to pass the parameters in a contextual event. The flow of work in the region begins, but normally doesn't end, if you do not get an output parameter.

  Here are some links:
  http://download.Oracle.com/otn_hosted_doc/JDeveloper/11gdemos/ADF-region-interaction/ADF-region-interaction.html
  http://andrejusb.blogspot.com/2010/10/contextual-events-framework-and-ADF-11g.html
  http://andrejusb-samples.blogspot.com/2011/02/jdevadf-sample-ADF-region-communication_13.html

  If you google you'll find many others...

  Timo

• ADF: Can ignore us the default activity of the ADF train in the stubborn workflow. ?

  Hi all
  
  I am a newbie for ADF and JDev. Start learning about the documentation provided for the ADF, I try to create a stubborn workflow that has an element of train and every stop on the train should be activated/skippered by program. I am able to jump the train stops after reading the content provided at http://www.oracle.com/technetwork/developer-tools/adf/learnmore/82-programmatically-navigate-trains-396873.pdf.
  But I'm not able to jump to the default train stop which is the first call of the activity in my case during initialization.
  Here are the steps I followed:
  1 creating a project of viewController and created a workflow in bounded with the component train activated.
  2. added 4 displays with train component marking the first view as default activity appeal.
  3. According to the document, which I mentioned above, I've added bean managed to ignore the train stop by program files.
  
  Now when I run the workflow, I'm able to jump the number of train stops 2/3/4, but I'm not able to jump stop number 1 (first stop which is the default activity) at initialization.
  According to documents from the ADF, for a stubborn workflow must be assigned default activity that is always called first when we enter the stubborn workflow. Which means, default activity will always be called initialization of said defined workflow and never to be ignored by the program. ? Alternatively, if there is a way to jump to the default activity, so please let me know the documentation/measures to do this.
  
  Thanks in advace.
  
  Published by: 1004973 on May 9, 2013 02:52

  Thanks Timo. Your idea has solved my problem. :)

  I created a new page in my workflow narrow-minded that I realized as a default activity for the workflow bounded. Then I applied the navigation via router and under certain conditions, I am now able to switch my order to my desired train stop. By this design, I can make another customization on train button(Back/Next).

• ExecuteWithParams in the stubborn workflow?

  Hello
  
  I use ADF 11 g and I am trying to achieve the following:
  < ul > < li > I have a page with a read-only table.
  < li > the user selects a row in the table, and then click one of the buttons above the table action.
  < li > A popup appears, which shows some details on selected lines, as well as some edit fields to add an entry for the action to perform on the selected record.
  < li > the user clicks OK, a PL/SQL procedure in the database is called to perform the action on the record selected with the input values given. < /ul >
  
  I have already created most of the features:
  buttons of selection and action < ul > < li > the homepage with the read-only table, single line.
  < li > delimited the workflow based on fragments of the page.
  < li > a fragment of page for each action.
  < li > popup has a region to incorporate fragments in. < /ul >
  
  I followed the diagram of the Incorporation of the regions inside the pop up windows to implement all of this. Most works very well. When I select a line and press action buttons, popup appears with the right fragment in it. The only problem is that the selected record does not appear, the fragment always shows the first record in the table.
  
  Here are some of my code:
  My definition defined workflow :

  <?xml version="1.0" encoding="UTF-8" ?>
  <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <task-flow-definition id="editPerceel">
      <default-activity>ExecuteWithParams</default-activity>
      <input-parameter-definition>
        <name>soortActie</name>
        <value>#{pageFlowScope.soortActie}</value>
        <class>java.lang.String</class>
      </input-parameter-definition>
      <input-parameter-definition>
        <name>pclNummer</name>
        <value>#{pageFlowScope.pclNummer}</value>
        <class>oracle.jbo.domain.Number</class>
      </input-parameter-definition>
      <task-flow-return id="ok">
        <outcome>
          <name>editPerceelFinished</name>
          <commit/>
        </outcome>
      </task-flow-return>
      <router id="soortActie">
        <case>
          <expression>#{pageFlowScope.soortActie == 'AMW'}</expression>
          <outcome>wijzigAmCode</outcome>
        </case>
        <!-- other cases left out for brevity -->
        <default-outcome>wijzigAmCode</default-outcome>
      </router>
      <view id="wijzigAmCode">
        <page>/percelen/wijzigAmCode.jsff</page>
      </view>
      <!-- other views left out for brevity -->
      <task-flow-return id="cancel">
        <outcome>
          <name>editPerceelCancelled</name>
          <rollback/>
        </outcome>
      </task-flow-return>
      <method-call id="ExecuteWithParams">
        <method>#{bindings.ExecuteWithParams.execute}</method>
        <outcome>
          <fixed-outcome>ExecuteWithParams</fixed-outcome>
        </outcome>
      </method-call>
      <control-flow-rule>
        <from-activity-id>soortActie</from-activity-id>
        <control-flow-case>
          <from-outcome>wijzigAmCode</from-outcome>
          <to-activity-id>wijzigAmCode</to-activity-id>
        </control-flow-case>
      </control-flow-rule>
        <control-flow-case>
          <from-outcome>cancel</from-outcome>
          <to-activity-id>cancel</to-activity-id>
        </control-flow-case>
      </control-flow-rule>
      <control-flow-rule>
        <from-activity-id>wijzigAmCode</from-activity-id>
        <control-flow-case>
          <from-outcome>ok</from-outcome>
          <to-activity-id>ok</to-activity-id>
        </control-flow-case>
        <control-flow-case>
          <from-outcome>cancel</from-outcome>
          <to-activity-id>cancel</to-activity-id>
        </control-flow-case>
      </control-flow-rule>
      <control-flow-rule>
        <from-activity-id>ExecuteWithParams</from-activity-id>
        <control-flow-case>
          <from-outcome>ExecuteWithParams</from-outcome>
          <to-activity-id>soortActie</to-activity-id>
        </control-flow-case>
      </control-flow-rule>
      <!-- other control flow rules left out for brevity -->
      <use-page-fragments/>
    </task-flow-definition>
  </adfc-config>

  As you can see, the default activity is an ExecuteWithParams. The idea is that this ExecuteWithParams selects a record unique, based on the pclNummer value, which must be unique. The ExecuteWithParams is defined in the pageDef as follows:

      <action IterBinding="TelerHeeftPercelenIterator" id="ExecuteWithParams"
              RequiresUpdateModel="true" Action="executeWithParams">
        <NamedData NDName="pclNummer" NDValue="#{pageFlowScope.pclNummer}"
                   NDType="oracle.jbo.domain.Number"/>
      </action>

  The button that triggers it, is defined as follows:

                    <af:commandToolbarButton text="#{aanvragenboviewBundle.WIJZIG_AM_CODE}"
                                             icon="/images/pencil.png"
                                             disabledIcon="/images/pencil_disabled.png"
                                             id="btnAm" partialSubmit="true"
                                             clientComponent="true">
                      <af:clientAttribute name="pclNummer"
                                          value="#{viewScope.percelenBean.selectedPerceelNummer}"/>
                      <af:clientAttribute name="soortActie" value="#{'AMW'}"/>
                      <af:showPopupBehavior popupId="::pclPopup"/>
                    </af:commandToolbarButton>

  My questions are:
  < ul > < li > by passing the value of key of the selected record and then retrieve the record again seem a bit too complicated for me. Is somehow possible to just get the record selected in the main page in the stubborn workflow?
  < li > if this is not possible, what I am doing wrong in my current approach? Why the ExecuteWithParams works not as long as expected? (It is actually running, I checked that, by setting a breakpoint on this subject). < /ul >
  
  Any help would be appreciated!
  Best regards
  Bart kummel

  Hello

  If you launch the TaskFlow in a dialog you must pass information as an input TaskFlow parameter. And then read you in the TaskFlow and run the query using a method activity.

  Frank

• I have windows live hotmail on Vista.Problem is that this message, 'error on page' appears on the lower left and no emails will be open and I can't change pages. How do you find / fix 'error on page '?

  I have windows live hotmail on Vista. New problem is the error message, 'error on page' appears at the bottom left. As a result I can't open any email or forward to other pages of e-mail. How does a find/fix 'error on page '?

  Hello

  ·        What browser do you use to connect to the internet?

  ·        The issue is with Hotmail?

  If the question is only limited to Hotmail then confirm your request in the forum Hotmail for assistance:

  Windows Live Solution Center Hotmail Portal

  http://windowslivehelp.com/product.aspx?ProductID=1

  If you use Internet Explorer, then you can try the steps from the link and check if it helps:

  What should you do about Internet Explorer script errors?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-should-you-do-about-Internet-Explorer-script-errors

• Fatal error: invalid page found in the global storage file in the location for cube BSO

  Hi all

  Due to drive App out of space issue, one of my cube essbase BSO is corrupted and I'm trying to restore it from the backup.

  
  

  I deleted files .esm & .tct and all the other temporary files, .pag deleted and index files, .app and .db restored backup files, the cube is not starting and throwing the error below.

  Error: 1270005 error loading application 1054003: [Thu Jan 22 16:01:52 2015] Local/EPM_LGCY / / / 17120/Error (1270005)

  Fatal error: invalid page found in the global storage file in the location [0001.0001.00000002]

  I copied the support environment of backend application and tried to launch the cube but still the same error.

  I tried to delete the cube of EAS and still the same error. No doesn't work on this cube, and every time he throws the same error.

  Could someone please explain what the error "invalid page encountered in the global storage to the location file" means and how to fix this?

  Any information is greatly appreciated.

  Thanks in advance

  Srini

  Try the following support document - "Essbase 11.1.2.3.500 by that Block Storage Option (BSO) Application fails to start the errors related to a global Application of the Option (ASO) storage (Doc ID 1667664.1)"

  Essentially to delete the ASO app under the location of the hybrid - /user_projects//EssbaseServer/essbaseserver1/hybrid /.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Sharing the view everywhere object to the pagefragments in an af:train in the stubborn workflow

  Hello
  
  I use JDeveloper 11.1.1.4. I'm in a position to use a display through all the fragments of page object in a train of component in a stubborn workflow.
  
  Can someone suggest me a way to do it?
  
  Kind regards

  You have shared it by default if itertor in your pageDefs links the same object of the view. In other words, you will be working with the same instance of VO.

• How to get the return value of the activity of the method in the stubborn workflow

  Hi all
  
  I use Jdeveloper 11 g R2 (11.1.2.3) & Weblogic 10.3.5.0
  
  I have a stubborn workflow, default activity is a call method than calling a method in the app module
  This method returns an id
  
  I need this code in my project to do something else
  Is there a way I can access the return value of the method call activity?
  
  Concerning
  Mohsen

  Set the value of return as #{{pageFlowScope.myBean.returnValue} pageFlowScope.myBean.returnValue} in the method, call the property inspector and get the value in your managed bean.

  String returnParam = (String) JSFUtil.getFromPageFlow ("returnValue");

• Layout error creating database clone on the same windows machine.

  I am tring to create the database clone on the same machine with rman.
  I made after the steps and get below error.
  
  (1) service created for clone
  2) had full hot backup with rman of primary DB(*.db_name='PROD')
  (3) startup pfile = 'initclone.ora' nomount; -> (* .db_name = 'PROD' and * .db_unique_name = "clone" parameter)
  RMAN 4) > restore controlfile to ' C:\oracle\product\10.2.0\flash_recovery_area\PROD\BACKUPSET\2010_08_29\O1_MF_NCSNF_TAG20100829T174218_67NMPW8D_. BKP';
  (5) sql > alter the editing of the database;
  6)
  RMAN > run {}
  the value of newname for datafile 1 to ' c:\clone\SYSTEM01. DBF';
  the value of newname for datafile 2 to ' c:\clone\UNDOTBS01. DBF';
  the value of newname for datafile 3 to ' c:\clone\SYSAUX01. DBF';
  the value of newname for datafile 4 to ' c:\clone\USERS01. DBF';
  the value of newname for datafile 5 to ' c:\clone\EXAMPLE01. DBF';
  restore the database;
  switch datafile;
  }
  
  (7) SQL > restore database using backup controlfile;
  ORA-00279: change 796656 September at 2010-08-29 17:42:19 needed to screw 1 ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_27_%U_. ARC
  ORA-00280: change 796656 thread 1 is in sequence #27
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_27_67NMSJ5Z_. ARC
  ORA-00279: change 797296 September at 2010-08-29 17:44:40 needed to screw 1 ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_28_%U_. ARC
  ORA-00280: change 797296 thread 1 is in sequence #28
  ORA-00278: log file ' C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_27_67NMSJ5Z_. ARC' is no longer necessary for this recovery
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_28_67NMSL6C_. ARC
  ORA-00279: change 797301 September at 2010-08-29 17:44:42 necessary to screw 1 ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_29_%U_. ARC
  ORA-00280: change 797301 thread 1 is in sequence #29
  ORA-00278: log file ' C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_28_67NMSL6C_. ARC' is no longer necessary for this recovery
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_29_67NN4WJD_. ARC
  ORA-00279: change 797828 September at 2010-08-29 17:50:44 needed to screw 1
  ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_30_%U_. ARC
  ORA-00280: change 797828 thread 1 is in sequence #30
  ORA-00278: log file ' C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_29_67NN4WJD_. ARC' is no longer
  necessary for this recovery
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_30_67NN9W5F_. ARC
  ORA-00279: change 799046 September at 2010-08-29 17:53:23 necessary to screw 1
  ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_31_%U_. ARC
  ORA-00280: change 799046 thread 1 is in sequence #31
  ORA-00278: log file ' C:\clone\arch\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_30_67NN9W5F_. ARC' is no longer
  necessary for this recovery
  
  
  Specify the log: {< RET > = suggested |} Filename | AUTO | CANCEL}
  
  
  
  She asks more of files, but in my primary DB, I have files not more arch.
  I have also generated new arc with "alter system archive log courses;" and applied but still getting the same error
  
  My primary database is in working condition and I can't stop it and I have in the file initora clone.
  
  Please suggest...

  Gour wrote:
  Still getting the same error

  SQL > restore database using backup controlfile;
  ORA-00279: change 799046 September at 2010-08-29 17:53:23 necessary to screw 1
  ORA-00289: suggestion:
  C:\CLONE\ARCH\CLONE\ARCHIVELOG\2010_08_29\O1_MF_1_31_%U_. ARC
  ORA-00280: change 799046 thread 1 is in sequence #31

  Specify the log: {= suggested |} Filename | AUTO | CANCEL}
  Cancel
  Cancelled media recovery.
  SQL > ALTER DATABASE OPEN RESETLOGS;
  ALTER DATABASE OPEN RESETLOGS
  *
  ERROR on line 1:

  
  ORA-01113: file 1 needs media recovery
  ORA-01110: data file 1: ' C:\CLONE\SYSTEM01. DBF'

  Try again, after step 5 cross rman
  6)
  RMAN >
  Catalogue start with "C:\oracle\product\10.2.0\flash_recovery_area\PROD\archive_logfullparh";
  Run {}
  the value of newname for datafile 1 to ' c:\clone\SYSTEM01. DBF';
  the value of newname for datafile 2 to ' c:\clone\UNDOTBS01. DBF';
  the value of newname for datafile 3 to ' c:\clone\SYSAUX01. DBF';
  the value of newname for datafile 4 to ' c:\clone\USERS01. DBF';
  the value of newname for datafile 5 to ' c:\clone\EXAMPLE01. DBF';
  restore the database;
  switch datafile;
  recover the database;
  ALTER database open resetlogs;
  }

  Published by: Alex on August 29, 2010 06:49

• How to create page elements in the Office of discoverer

  Hi all
  any body can help me creating a page of items. How we create pageitems in discoverer.
  Thanks in advance.

  Hello

  When you select bussiness area and select the items that are required by the wizard of workbook. In step 3 of the wizard of workbook, you can check the page see the box and drag and drop the item you want to see in the page element section.

  Hope that helps you!

  Kind regards
  Murielle

• Refreshing data in return of a stubborn workflow (popup)

  JDeveloper 11.1.1.6

  I have a main page that calls a taskflow bounded as a popup. One of the actions is a workflow bounded to add a line in a VO that is used in the home page.

  After you add a line in the VO in the stubborn workflow, the workflow is completed. Unfortunately, the table in the home page is not updated to show the new line added.

  I tried the following techniques to update the table in the home page, without a bit of luck:

  1. Add call action to run the executewithparams in the page to refresh the VO.

  2. added run method to run executewithparams in the stubborn workflow.

  Any suggestion?

  
  Thank you.

  I don't think you should call executeQuery once again because the same view object is used on the home page and the popup.

  What are the properties of the delimited taskflow transaction to view the pop-up window? Are you sharing the data controls with the workflow calling for the popup?

  In addition, if you share the data controls, you can try to refresh the iterator binding (by table) instead, run the query again.

  	DCIteratorBinding = iterBinding
  	(DCIteratorBinding) bindingContainer.get ();
  	If (iterBinding! = null) {}
  	iterBinding.refreshIfNeeded ();
  	}

  In addition, to refresh the component af:table to close the pop-up window.

• Hosting with Go Daddy - error creating folder //images

  I just tried to download my Muse 2.0 on GoDaddy site and saw this arror in point 60% complete.

  Error creating folder //images

  The tech to Go Daddy, said that their server recognizes all the names of folders with slash.

  

  Suggestions appreciated

  So, here's a solution that works...

  After viewing the site at the main directory HOST example... / host/45/37857485/html

  Go to the GoDaddy localize file manager html folder that your files are backed up to...

  Click the folder

  Select all the contect

  Click on move

  Choose the HTML (home folder)

  That all of your files will go to the desired destination.

• ERROR when you try to see pages created with workflow create page

  Greetings
  
  I developed a WebCenter Application that uses the security of the ADF with forms authentication. This app has
  two JSPX is one the login page and the second is the page where I managed runtime created pages
  using the workflow to CREATE a PAGE and a tree itarator page to see my created pages.
  
  When I deploy application on weblogic Server I am able to connect successfully and create as many pages as
  I want and also see them using the generated link. the problem is that when a removal of the application of the weblogic
  Server, I want to tell the deployed application, and then redeploy the application even on the server, I can log in again and
  See the pages I created before, but when I try to reach them I get this error showed in my internet browser:
  
  Error 401 - non authorized
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.2 401 unauthorized
  
  The request requires user authentication. It MUST contain a header field (section 14.46) WWW-Authenticate
  containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable authorization
  header field (section 14.8). If demand already includes of the authorization credentials, then the 401 response indicates that
  These credentials for authorization was refused. If the 401 response contains the same challenge as the previous answer,
  the user agent has already attempted once authentication, then the user SHOULD be presented the entity that was
  data in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained
  in article 11.
  
  What kind of configuration is missing or me what is happening?
  
  Thanks for your help

  I see a problem here (no jazn-"Data.xml").

  When you create pages using the task flow page information go to MDS but security information are always of jazn - addedd "Data.xml". MDS is retained, but jazn-"Data.xml" is published again when you deploy the application.

  Basically, you need a way to control jazn-"Data.xml".

  Fortunately, there is a way!

  When you deploy in the EAR indeployment profile you have an option 'Security Deployment Options' uncheck 'decide that to replace... ". »

  But this approach won't work on when redeployment. Will not work when the cancellation of the deployment and deployment.

  Vincent

• Error when you try to create a region of the page generated by the anonymous pl/sql block

  Hi guys I tried to create a region of the page which is the source and anonymous pl/sql block and I have been making a few mistakes. Basically what I want this region to do, is to give the current user of the application one summarized data compared to there user name which is: app_user the code I used was

  declare

  ven_ret varchar2 (15);

  BEGIN

  ven_ret: = (select u.vendor of USERS4ARCHITEC u )

  
  

  where

  u.e_mail = V ('APP_USER')

  and not exists (select null from arch_tbl I where u.vendor = i.vendor and user_id = V ('APP_USER'))

  order u.vendor in ven_ret);

  END;

  /

  the structure of the table to the USERS4ARCHITEC table is

  User varchar2 (15) vendor2 (20)

  ----------------------------------------------------------------------------------

  user@1                                                                          sap

  user@1                                                                          oracle

  user@1                                                                           IBM                                                            <---------sample data

  user@2                                                                          Oracle

  user@2                                                                          cisco

  the structure of the table to the arch_tbl table is

  user                                                     vendor

  --------------------------------------------------------------

  user@1                                                 sap

  So if user@1 logs in the application of the region using the pl/sql code code above should display oracle and IBM, because these two sellers are always under his username that he has already used a form to insert the sap into the arch_tbl table. Please tell me what I'm doing wrong here. Thank you guys

  Why would you build a type psedu at APEX report MANUALLY when you can just build a relationship with the same selection you use now for your pl/sql dynamic region?  What is the purpose of building your own report when the tool made for you?

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• test page, cannot print the operation fails (error 0 x 00000006)

  I can not print on a kyocera taskalfa 300i network. When I try to print a test page, I get the error next test page failed to print. operation can not be completed (error 0 x 00000006)

  read some info here (you may need to connect using any microsoft account):

  1. http://social.technet.microsoft.com/Forums/en-US/itprovistaprinting/thread/8eae0318-efc4-4087-91f9-3c27ad2ea4d6/

  Alternative workaround solution on another forum:

  Configuration and settings, then Control Panel then add a printer
  Choose "add a local printer. Click on "create a new port". Use the Local Port.
  Next dialog box is "Enter a Port name."
  Type the path to the printer: \\(computer name) \(printer name).

  It worked for me after MANY, MANY hours trying to do it by the "book".

  2. http://social.technet.microsoft.com/Forums/en/itprovistaprinting/thread/9c14dd83-2c71-45d3-8829-7e9cabb04d86

  or here in the microsoft community:

  3. http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/operation-failed-with-error-0x00000006-windows-7/3deb8c17-aa1d-40a1-bdad-20dc2c9cb3d0