Error 'driver is unavailable"message using lexmark prestige pro805

Similar Questions

• Windows Mail error 554 service unavailable message when you try to send an e-mail.

  I have an email address that can not receive mail sent by me by e-mail from windows, but they can if I send it through my ISPs web mail. This has been a problem for the past few weeks after being able to use it for months.

  I have an email address that can not receive mail sent by me by e-mail from windows, but they can if I send it through my ISPs web mail. This has been a problem for the past few weeks after being able to use it for months.

  When you repost to network, e-mail and put online...

  Please post the FULL error message. Not only does the code 544.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• External hard drive suddenly cannot open it give the message error "you must format the disk in the drive until you can use it", and your hard disk is 0 bytes

  External hard drive can not suddenly open - fixed

  my external hard drive worked very well all the time, but suddenly I can't open it more, when I tried to open it, it gives the error message "You must format the disk in the drive until you can use it" and my hard drive is 0 bytes, average there is no file in the hard drive. Average, all the data inside hard disk are gone!

  Hello muhammad.

  Before you do anything with this player, you can search online for some data recovery utilities so that you can try to recover your data.

  What operating system do you use?

  Have you tried running chkdsk on the drive?

  Let us know.

  Best regards

  Matthew_Ha

• Error message saying the driver is unavailable when I connect my camera Canon Power Shot S 30.

  I have Windows 8 and I get an error message saying that the driver is unavailable when I connect my camera Canon Power Shot S 30.

  Hi Marc and KatyReiling,

  Welcome to the Microsoft community.

  According to the site Internet on Canon Power Shot S 30 camera doesn't have a driver according to this link

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_s_series/powershot_s30#DriversAndSoftware

  However, we need to know if you tried to connect the camera to a computer or another USB port?

  Let us know more information about the issue and we will be happy to help you.

• trying to UN-ininstall print driver error message: could not remove the HP LaserJet 1020 driver. The specified printer driver is currently in use. __Failed to remove the hplj1020.inf package. Access is denied.

  I have a new win 7 and have a lot of trouble installing an HP laserjet printer.

  When you try to remove the drivers under properties of the print server, I get the following message:

  "Cannot remove the HP LaserJet 1020 driver. The specified printer driver is currently in use.
  Impossible to remove the hplj1020.inf package. Access is denied. »

  someone knows what's the problem?  the prnter is not yet connected.  Must not be in use.  The problem I had was that the stuff sent to the printer seems to sit and take 15 ins to print a test page.

  How can I remove the drivers?

  Stop the print spooler service, and then start the print spooler service.  Now, delete the print driver and packaging. Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• Unable to upgrade Windows Vista to 7, error: implementation could not determine whether the BitLocker Drive encryption is in use.

  Original title: Upgrade Vista - 7 and issue of Bitlocker.

  I'm upgrading stops priocess Vista-32 to Windows 7 family 32-bit and upgrade when checking report of compatibility as a result of the error message following: "implementation could not determine if BitLocker Drive Encryption is in use.

  I have established that my Vista is not only encryption, so I can't turn it OFF... it's weird I had myself far enough in before upgrading... always new problems affecting it right back

  Hello

  I suggest you try the steps suggested by Andre Da Costa replied on March 27, 2010. From the following link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Setup-was-unable-to-determine-if-BitLocker-Drive/7be7ac98-5e73-49e5-9636-179cf7b11b23

  See also: What is the difference between disabling BitLocker Drive encryption and decrypt the volume?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-the-difference-between-disabling-BitLocker-Drive-encryption-and-decrypting-the-volume

• External hard drive not detected with the error: "You must format the disk in the J: drive until you can use it."

  Hello

  I have an external hard drive to work perfectly. I'm back from vacation, and it does not appear under "My Computer". It appears under "Devices and printers", however. This is a link to a screencap of Device Manager: http://i.gyazo.com/9e91e1d71ed32c55dba0419e79b499d5.png

  The device in question is that of J:, and it says here that he has 100% free space, that worries me, because he had only 50 GB of free space when I used the latter. After that I open the disk management, I get a pop up message saying: "You must format the disk in the J: drive until you can use it."

  How can I get my hard drive appears again?

  Thank you

  Original title: external hard drive not appearing is not in Windows 7

  Hi John,.

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  According to the error message, I suggest trying the suggestions posted by the NakulShridhar responded on 14 October 2011 and by that alexquiteguy replied on 13 January 2011 in the thread following link and check if it helps.

  "You must format the disk in drive J: before you can use it"

  [Steps apply to Windows 7]

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• You met 800C2F19 error message using Windows Media Player.

  I use XP with service Pack 3 on it. I get the message you met 800C2F19 error message using Windows Media Player. More information are not currently available for this error.  I am trying to download the OverDrive Media Console software

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. what version of Windows media player do you use?

  3. when exactly you get this error message?

  I suggest you Uninstall and reinstall the latest version of Windows media player and check if that helps.

  Windows Media Player 11 for Windows XP: http://www.microsoft.com/download/en/details.aspx?id=8163

  Hope this information is useful.

• I met the C00D1199 error message using Windows Media Player. ____

  Windows Media Player will not play a. MOV file and gives me an C00D199 error message.

  http://www.Apple.com/QuickTime/
   
  Of http://support.microsoft.com/kb/316992
  Content (.mov, .qt) QuickTime
  Versions of Windows Media Player that support this file type:
  Windows Media Player 7
  Windows Windows XP Media Player
  Windows Media Player 9 Series
  Windows Media Player 10
  Windows Media Player 11
  Apple Computer developed the QuickTime file format to create, edit, publish,
  and view multimedia files. QuickTime format can contain video, animation,.
  graphics, 3D and virtual reality (VR) content. That the version of QuickTime files
  2.0 or an earlier version can be played in Windows Media Player. Later versions of
  QuickTime require the Apple QuickTime Player owner. To learn more
  information, visit the following Apple Web site:
  http://www.Apple.com/QuickTime (http://www.apple.com/quicktime)
   
  See also
  http://www.Windows-Media-Player-updates.com/playingmovfilesviaWMP.html
  --
  ..
  --
  Chip "wired" wrote in message news: e17e64f4-213-a - 4 c 40-aec8-8a4cc6ff12b3...
  > Windows Media Player will not play a. MOV file and gives me an error of C00D199
  > message.
   
   

• Ventrilo in world of warcraft runnig vista__Unable to enable DirectSound for some device.__DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use

  My ventrilo was working fine two months ago, but now for some reason any gives me these errors, "unable to enable DirectSound for the selected device.
  DirectSoundCaptureCreate failed. HR = DSERR_NODRIVER. No sound driver is available for use. On my other computer samething but different error message that reads, "cannot open the input device. Another program, it may have already. RC = - 10"

  Event. worked fine on both computers. have updated and rolled back all the audio drivers, uninstalled event. and reinstalled. What continues?

  I have finnally got the answer that it must be run as administater. For the Horde!

• Error loading operating system message is displayed after the partial installation of Windows XP

  Hello all, I was doing a clean install of Windows XP from the CD on my desktop PC.  I had reached the point where I had deleted the existing system partition and created a new system partition and had begun to load data from system to system on the CD when I accidentally stop the surge protector, shutting off the power to the computer, the screen of the monitor, etc.  After that I restored power, I turned on the PC without the XP installation CD in the CD/DVD drive.  The system posted successfully and start the CD line appeared IMMEDIATELY followed by the message "error loading operating system" on a new line.  I tried to start with the installation of XP in the drive disc, as well as with the "Ultimate Boot CD" in the player - the "Error loading operating system" message appeared in both cases.  Thanks for any help you can provide!

  The desktop PC has had a full legal work Windows XP with SP3, but I chose to reinstall from scratch, because I had problems with corrupted data in the Zone Alarm and card ATI graphics card software that caused random outages, lead to situations of re - start.  I couldn't fix the files for these 2 applications that I had this desktop PC in stock for more than 18 months and I couldn't remember the administrator password I had used.

  Once more, these error messages tell me you dΘmarrez the hard disk and no CD-ROM drive.  The message "NTLDR is missing" is read the boot sector, on most of the installations of Windows, the boot sector is usually the absolute sector 63 on the disc, using DiskProbe you will see the text of the message to the given sector.

  Your drive is perhaps at fault... or it may be absolutely nothing wrong with it!  You may need to press a key to boot from the CD, often you see a message like «Press any key to boot from CD...» "or some thing in this sense, maybe you're not a touch and the BIOS ignores the boot from CD-ROM and goes to the next boot device (hard drive).

  John

• Error code: Exception processing message 0xc0000013 parameters 0x758b92A0 0 x 00000004 0x758b92A0 0x758B92A0

  Error code: Exception processing message (parameters 0XC0000013 0x758b92a0 0 x 00000004 0x758b92a0 0x758b92a0)
  And: Photoscreen Eve-no disc (there is no disc in the drive please insert a disk in the 1\dr1 drive\device\harddisk)

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O when exactly do you get this error message?

  O have any changes to your computer recently?

  In the meantime, follow the instructions below that may help you resolve the issue.

  If your removable media appears with a drive letter named C:\ or any other existing drive letters, you must change its drive letter.

  1. click on start.

  2. type in "Computer management" in the search box.

  3. click on computer management.

  4. click on continue to continue.

  5. in the computer management window, click on disk under the option of storage management.

  6. you will find all the storage devices connected to your PC here.

  7. If you want to change the drive letter, right click on the connected removable media and click change drive letter and paths...

  8. it would take you to another box.  Click on change.

  9. Select the drive letter to assign the menu drop down.

  10. to confirm, click OK.

  11. click on Yes. Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  Michael T.L. says:

  Why my iPhone 4S (ios 9.3.5) does not activate the messages using my apple ID?

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• In e-mails AOL, verification of the individual messages in the results of regular system in this error message: there was an error while loading the message. Please try again later.

  In access to AOL e-mail via the full version, I can navigate my account (old messages, new messages, spam, etc.) very well, but when I try to open an individual email, I get this error message: "there was an error while loading the message. Please try again later. »

  This is identical to a problem someone else was described in another thread... Unfortunately, nothing suggested you him seemed to work. I have BEEN cheated at the opening of a file attached to an e-mail immediately before this started, so I think it's a virus or something. IN ANY CASE... I AM able to open the messages when I use the basic version of AOL. Initially, the problem seemed to be in Firefox, but I tried with Internet Explorer now also and it's the same thing, and the basic version is accessible while the full version is still blocked.

  On both browsers, after the error message, I can't even click on individual posts to TRY to open another, and there are a few not-very-right boxes and the x and the things that appear on the screen that do not belong.

  Please tell me that you can not do that, go away... I tried uninstalling and reinstalling... Firefox who did not. I also enjoy McAffee, and that has not changed anything.

  You can do a check of malware with several digitization programs of malicious software on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Satellite A300 PSAGCA - 02Y010 - error: driver Webcam open failed

  Problem:
  Receive error whenever I try to use the camera for Toshiba support software: Webcam driver open failed. Restart the computer or the camera. Webcam does not work in Skype. It seems that it is a very common problem with the A300s series, but there is no clear solution there.

  Material
  Series: A300
  Model: PSAGCA-02Y010

  Software
  Operating system: Windows 7 64 bit
  Camera Assistant Software for Toshiba: 1.7.175.0123

  Details
  I recently did a clean install of Windows 7, Windows Vista update. I've never used the web cam on Windows Vista, so I can't testify as to whether or not the web camera is workin properly. However, when I tried to use it with Skype, it did not work. I reinstalled the driver that I backed up before I installed the new operating system, but it did not work. The web cam does not appear at all in Device Manager - even when the value for show hidden devices. Trying new material added through the control panel fails to detect the webcam at all. I rebooted after each installation/repair of the driver.

  Measures taken

  Reinstalled drivers saved
  I used the third-party software (Double Driver) to back up and reinstall the drivers for the webcam after I installed Windows 7. Double Driver claimed there was no device to install the driver. Manually, I copied the files in the folder using the camera and replaced existing ones. The files I copied were:
  casflr.cat
  oem34.inf
  Restore.ini
  UVCFTR_S.SYS

  Pilots relocated from site Web from Toshiba
  Vast Goolging turned only recommendations to uninstall and reinstall the drivers. I was unable to find the drivers for windows 7 64 bit, but I tried for my laptop model for Windows Vista 64 - bit - no luck. I tried to install software camera for Toshiba support, as far as I know, including the driver - it gives me the error described above.

  I also tried to find a universal Windows 7 driver for the webcam - I was unable to find one.

  Check the registry value is Correct
  I tried also checked the registry value to HKEY_LOCAL_MACHINE/System/ControlSet001/Enum/USB/SN001/ClassUID corresponds to the value in C:\Program Files (x 86) \Camera Assistant Software for Toshiba\driver\64bit\casflr.inf as and C:\Program Files (x 86) \Camera Assistant Software for Toshiba\driver\32bit\casflr.inf recommended by some article is recommended.

  Please, I would really appreciate it if someone could help me out here. I've exhausted all the options I can think.

  Probable solution:
  I met a thread post who suggested a loose wire was responsible and that the camera could work when the cover is almost closed. I tried this and the camera suddenly appeared in the Device Manager. However, I still can't make it work with Camera Assistant Software or Skype.

  Post edited by: A300Owner

  > The web cam does not appear at all in Device Manager - even when the value for show hidden devices.
  > I met a thread post who suggested a loose wire was responsible and that the camera could work when the cover is almost closed. I tried this and the camera suddenly appeared in the Device Manager.

  Does this mean that webcam does not appear in Device Manager if the cover is open right?
  In this case, it seems that there is no link between the webcam and the motherboard.
  As far as I know as the internal cam is connected to the controller card USB mother s and possibly there is a bad connection.

  Possible solution: I think that the technician needs to disassemble the laptop to check the connection :(