Error editing profile of preflight

Similar Questions

• Satellite MX35X: Atheros Client Utility cannot create or edit profiles

  Atheros Client Ultility all is greyed out. Don't create or edit profiles. On the profile management tab, eveyrthing is grayed out. Any ideas?

  I try to establish a wireless connection for my Satellite MX35x and have just changed ISP to AOL, if that helps. I tried updating the drivers and that you have also reinstalled the Client Utility from the recovery disc.

  I'm stuck!

  Hi Graeme

  I don t use the Atheros Client Utility and I put t know exactly how it works, but a similar problem happened on my laptop WLan connection with different tools.

  I think all options in the Atheros utility are dimmed because the WLan connection setup will be done by Windows operating system.

  Therefore, you should check first if the option use Windows to configure my network wireless in wireless network connection properties is disabled. If this is not the case, do it!

• Translations of the apex: publish application translated gives the error "error editing or requests. (Rank 1) »

  Hello

  After seeding and the translation of our application, we receive an error trying to publish a translated application.

  The error is: "error editing or requests. (Rank 1) ».

  We are currently working in oracle 11.2 and apex 4.2.2.00.11

  How can we get more details about this error, then
  can we start looking for a solution?

  I deleted the translations for our application in the apex tables ' APEX_040200.WWV_FLOW_DYNAMIC_TRANSLATIONS$ ' and de-seeded and publishes the application again, but I always attack got the same error.

  It was just to test that the error was not caused by special characters in our translated articles. I won't avoid all delete and start all over with the translation.

  I also tried to copy our request for a new application, translation mappings have been copied, but the translations himself does not seem to be copied.

  I've de-seeded and published the translation in any case, and there is no problem.

  Kind regards

  Hello

  I just wanted you to know that I have found that the cause of the error and maybe this solution can help others.

  Instead of seeding and publication via screens Apex I used a script to seed and to publish, the script uses the procedure 'wwv_flow_translation_utilities.seed_and_publish '.

  After you run this script, there are an error more detailed where I could work on, the error was "ORA-20001: error when executing wwv_flow_copy: WWV_FLOW_STEP_ITEMS > ORA-02291: Integriteitsbeperking (APEX_040200.WWV_FLOW_STEP_ITEMS_PLUG_FK) geschonden - bovenliggende key is niet found.»

  After digging in the elements and ankles, I found that an article in which 137 request was bound to one region of another application 136.

  How this has happened today is still a question mark, but change the region of this element to a region of the same application solved this problem.

  I had to change it by using the function "Modify all" because to go into the details of this element makes apex go into error mode.

  Concerning

• Not able to connect to the user account, error: user profile Service has no logon

  I'm on a HP Pavilion dv7 with Windows 7.  I created a user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon.  User profile cannot be loaded. »

  Where and how can I fix it?

  Thank you.

  Larry

  Original title: need help with setting up an account

  Hi Larry,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you are not able to connect to the user account when you try to connect you get following error. The user profile Service has no logon

  This behavior can occur if the user profile was deleted manually using the command prompt or by using Windows Explorer. A profile that is manually deleted does not remove the security identifier (SID) of the list of profiles in the registry.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  To resolve the problem with the user account, you can follow these steps:
  Method 1:
  (a) click Start, type regedit in the start search box, and then press ENTER.
  (b) search for, and then expand the following registry subkey:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  (c) right click the SID that you want to remove, and then click on remove.
  (d) log on to the computer and create a new profile.
  You can also check this link:
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important: The above section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Method 2: Also, see the steps in the following Microsoft article:

  (a) error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Note: We strongly advise against making it the standard way to remove the user profiles on computers. Documented and supported approach is using the system advanced settings in the system, "Profiles" settings properties For programs, it is available using the API 'delete profile '.

  If the SID is present, Windows will try to load the profile using the profile Image path that points to a nonexistent path. Therefore, the profile cannot be loaded.

  (b) how to back up and restore the registry in Windows
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  (c) IF you still have the problem then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  For any Windows help in the future, feel free to contact us and we will be happy to help you.

• Error in profile after host controls can be updated.

  I recently applied ESXi550-201505002 (may be updated) all of my host and now my profile checks host will not work. I have attached to creating a new profile of the host and also update my profile existing and still no joy. The error I get is "chess against host profile: unexpected error, compliance: no object Type isn't iterables.  I Googled it many different ways and I tried a bunch of different solution attempts. Can anyone shed some light on this for me?

  Thank you in advance.

  
  

  OK, problem solved. I thought that I would update just in case someone encounters this situation in the future.

  Our ESXi host for security reasons must be on their own segment without access to any other domain joined machines... except vCenter of course and they do not have direct access to the domain controllers or DNS (we have a file local host on each host computer referencing the other ESXi host). In our host profile DNS is not configured, but apparently something with this most recent update did not like that and that it is 'unknown' when you try to run a compliance check. I could always apply a profile of the host, not simply check that she was entirely consistent thereafter.  So basically, I edited the host profile to include not "DNS Configuration", located in configuration Networking--> NetStack Instance--> default TcpipStack--> DNS configuration. Once I did all the checks came back normal and showed consistent.

  Take care.

• I can't connect to my user profile, get the error "the profile Service service user filed logon"

  I get the message; The user profile Service service filed the opening of session. Could not load the profile to logon.

  Hello

  The feedback forum is for feedback on the Forums for answers and no technical assistance.

  This should ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  ===================================================================

  It's for Windows 7, but Vista is very similar.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Error in profile after you apply KB978207.

  I can not connect my usual profile after you apply the update for today.  How to restore things safely?  I wouldn't lose everything that is related to the original profile.  Vista Home Premium.

  I just enabled KB978207 to install stopped down.  When I restarted the update seems to be going through its three steps more, but when I logged in I got the following error 1508 and I was connected to a temporary profile.

  Windows could not load the registry. This problem is often caused by insufficient security rights or insufficient memory.

  DETAIL - the process cannot access the file because it is being used by another process. for C:\Users\Michael Ingram\ntuser.dat

  ==================

  Before this generated error I see this in the event log.
  WMI error 10

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  Or you can...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  NB: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Java error - change profile data collection scheduled

  Hello community!

  I am a new user of the NMP and trying to download data from my CSP collector on the smartservices portal.  I get a java error on two different computers with different versions of java (7u40, 8u71).  Anyone seen elsewhere and know a fix?  My CSP is 2.5 v.

  I get the following error when I try to save the changes to the profile collection by default (the schedule).

  Please let me know if you need more details and thank you for your time.

  collection_settings.jpg

  

  Error.jpg

  

  Hi Jarrod,

  SSH on the manifold and run the command "sudo service epsc restart" and then reconnect and try again. Looks like that the service may be suspended.

  Thank you

  Lynden

• "Unable to connect to the computer error' user profile failed to connect.

  Original title: reset windows password after being locked up and he treated the new password, but I'm still locked. I don't have a password reset disk. What should I do now?

  Tour computer off standby. And when I turned it back the next morning that my password would not work. Figured out how to change the password but still getting the same message and still locked. He did deal with the new password, but just do not let me in. I don't have a password reset disk. What should I do now? Any help is greatly appreciated. I have to deal with my computer and must be able to use it as soon as possible. Thank you

  Also says "Service user profile service does not logon.

  You suffer from the dreaded problem 'user profile '. I don't have a good solution, but if you type the entire error message into a Google search box, you will get countless successes with at least some of them containing good advice.

  No one gets a Windows repair CD when buying a PC. You need to burn it yourself via the control panel / backup and restore. It only takes three minutes and having one is absolutely essential for those who wish to make their own PC maintenance.
  Talking about the essential things: a fully tested alternative admin account is one of them. Without one, you can get in diabolical trouble (the same as when not having is not a spare House key where to break a window is a radical and totally useless but effective solution).
  It might be possible to solve your current problem as follows:
  1. keep tapping F8 during the first phase of startup.

  2. select Repair from the menu.

  3. Select an administrator account, and then enter its password.

  4. When you are prompted, select System Restore.

  5. set Windows to a point well before this problem occurred. This will outline also all passwords to their old values.

• Problem with edit profile

  Hello

  I find it difficult if you change the details of my profile.

  The problem I encounter when I go to the profile page to edit previously added data that didn't exist. I'm surprised to see that it works like adding new profile information.

  I doubt that I am facing this problem or it is a problem for all users.

  Would be great if someone help me to solve it by myself or like OTN admin have this problem.

  Thank you

  Shidu

  I hope that this isn't a great challenge to fix. Hope OTN admin may take the necessary measures for this.

  Because bring a case when you want to update the field biography, already it may have 10 to 20 lines now if I want to add more of 10 lines I have to keep all the lines from 10-30 strike once more and he is agitated to remember all the previous one that we previously provided.

  Nice admin to fix it.

  Thank you

  Shidu

• Error creating profile host

  Ciao a tutti, ho da una nuova infrastruttura VMware e I wanted utilizzare gli host profile by the customizzazione di tutti gli host led cluster. Quando provo a host profile dal primo generare e riporta ESXi host he following error:

  Call 'HostProfileManager.CreateProfile' of object "HostProfileManager" on vCenter Server 'ESX-VC-INF - 01.wind.root.it' failed.

  ActiveDirectoryAll firewall rule must be enabled for the netlogond service

  ActiveDirectoryAll firewall rule must be enabled for the lsassd service

  Invalid value for standbyNics

  
  

  
  

  By the terza voce it solution ROM averlo trovato:
  

  Invalid value for standbyNics

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2046951

  http://www-01.IBM.com/support/docview.wss?uid=isg3T1018919

  Per gli altri due non riesco a find Giro, potete darmi some supporto in merito nulla?

  Grazie

  Ciao Alethay grazie, sono riuscito a risolvere ibm_db proprio abilitando firewall option che mi hai reported, avevo trovato sul it workaround it by the demon of UN altro ed ho fatto the prova.

  By altro problema ho seguito I link di seguito e funziona:

  Invalid value for standbyNics

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2046951

  http://www-01.IBM.com/support/docview.wss?uid=isg3T1018919

  Tutto ok!

• Edit profile

  Inside the Edit Forum profile inside the box Email, when you select yourself, Dose, which means that you are the only person who can see your profile, such as the e-mail address.

  
  Inside of the watch prview still your profile when I select yourself, when I click on preview of the email, but when I select the e-mail registered users don't dose not show. Is this because Iam connected?

  
  If I want to email as private which must be checked
  Thank you

  I agree with Station_Two. In the comments to the Forum, if you have problems with their Adobe profile, then others, or John C. (Adobe-Admin) can help them.

  Good luck

  Hunt

• How to create the profile of preflight "drop".

  I want to create preflight profile to display information as in the screen shot as a preflight report.  kindly advice.

  

  Select the preflight profile, then click on the Options menu (top-right) and select Create a Droplet preflight.

  You'll want to specify two folders, one for files, who succeeded in operating profile and one for those who are not. I usually save these folders on the desktop.

  Save the drop (I'm usually save it to the desktop). Then drag the PDF files on the drop. He runs the profile and move the files obtained in one of these two files.

• Size of incorrect Page or error detected in Live Preflight Orientation

  Wednesday, November 10, 2010 12:16:40 PM PST

  I am preparing a newsletter created in Adobe InDesign to send to a printer in Germany.  This is the first time I send a document to the press since her arrival in Germany in February and the first time since upgrading my computer and software for:

  MacBookPro: Model 5.3

  Adobe InDesign: version 6.0.6

  Adobe Acrobat Pro: version 9.4.0

  The size of standard paper in Europe is "A4", slightly larger than the size of our 'letter '. Document has been implemented a 'A4' size of the document. A4 is also selected in the print menu.

  Webcam live Preflight shows "size incorrect page or orientation" and wrote:

  Required: 612 PT. x 792 pt.

  Current: 595,276 PT. x 841,89 pt.

  FIX: Choose File / Document configuration to specified the required page size.

  I tried to change the format of the document to the 612 x 792 'compulsory', and the document was tight in the smallest space, ruining the formatting of document! I have undone the damage and looked further for the preferably incorrect setting.

  There is a wrong setting somewhere, but I can't.

  Distiller rejects the document and does not generate a PDF file. The only other errors detected upstream are from the RGB color space.

  All InDesign Menu print and PDF generator preferences settings are set for A4 format, yet Preflight insists on the fact that the Document

  Size and Orientation are incorrect and suggest to change the size to 612 PT. x 792 pt.

  I also noticed that when you configure the PDF file, I did not check "Optimized for Fast Web view," but when I generated the PDF, it "optimized for fast Web view." It seems that there is some preference somewhere is the substitution of my selections. But where...? !

  I was able to generate a PDF from InDesign (without Distiller) and the printer has been able to use the PDF file.  I learned to always use distilled when sending files to printers and to "Pack" the files.  Is there some risks by sending files without using Distiller?

  In addition to the question of size and page orientation, Europe has different standards for space colors and ink printers also. I would be grateful if someone could shed some light on how I should adapt to European standards.

  I was disappointed that Adobe has offered only paid a pension, even if I bought Adobe CS4 less than a year ago. For a pricey

  product, I think that assistance would be available for a minimum of one year.

  ...??? This message to distill indicates you throw your InDesign file on it. Distiller can only distill the PS files.

  Why not use export to PDF?

• Can I set a profile of preflight custom as my default?

  The preflight profile base in InDesign doesn't grab text and boxes in RGB, so I put in place a custom profile that makes. I still need this checked, if I prefer my custom profile to be my default when I open any InDesign document. Is there a way to do this?

  Much obliged for the answers.

  SoC

  Well Yes, just open the preflight Panel. Access the flyout to panel´s and select the preflight Options and change your working profile...