Error in profile after you apply KB978207.

Similar Questions

• Error of the responsibility of purchasing Internet after you apply the hotfix

  Hi Guru (s):
  After you apply patch 5156915 we get this errro when we choose I have the responsibility to Procrurment:
  
  The HOME POR SSP function is not available under the responsibility of the Internet purchases.
  
  iProcurement is installed.
  
  Any ideas would be appreciated thanks.
  
  EBS 11.5.10
  
  Published by: Dan at December 16, 2008 09:10

  Dan,

  For 11.5.5 - 11.5.9:

  $ rm r * of $OA_HTML/_pages/_oa__html

  For 11.5.10 and above:

  $ rm r * of $COMMON_TOP/_pages

  You can also take a backup of the server cache directory before you turn it off (just in case).

• DLL version does not update after you apply MS14-026

  Hello

  I applied the security of .NET for MS14-026 patch according to the https://technet.microsoft.com/library/security/ms14-026 on my Windows 2008 R2 SP1 servers.  I did have errors or problems during the installation, but what I find more precisely with the .NET 3.5.1 update (http://support.microsoft.com/kb/2931356) is the version of file not updated the version number that is in the article.  I have not checked all the files in the list, but a single specific file used by our security team to determine if the update has been applied is system.runtime.remoting.dll article states that the version number of this DLL must be 2.0.50727.5483 after you apply this update.  On all systems, I applied this update for at least 10 so far, it remains to the 2.0.50727.5420 version.

  It is perhaps a typo in the documentation or could I do something wrong?

  Thanks in advance for your review!

  J

  Hello

  I applied the security of .NET for MS14-026 patch according to the https://technet.microsoft.com/library/security/ms14-026to my Windows 2008 R2 SP1 servers.  I did have errors or problems during the installation, but what I find more precisely with the .NET 3.5.1 update (http://support.microsoft.com/kb/2931356) is the version of file not updated the version number that is in the article.  I have not checked all the files in the list, but a single specific file used by our security team to determine if the update has been applied is system.runtime.remoting.dll article states that the version number of this DLL must be 2.0.50727.5483 after you apply this update.  On all systems, I applied this update for at least 10 so far, it remains to the 2.0.50727.5420 version.

  It is perhaps a typo in the documentation or could I do something wrong?

  Thanks in advance for your review!

  J

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Urgent @catbundle.sql fails after you apply the hotfix

  After you apply patch 14727347
  
  Oracle RAC version: 11.2.0.3.0
  patching interm patches: 11.2.0.3.5
  
  @catbundle.sql is found in the errors and performances
  
  Select * from dba_registry_history;
  ACTION_TIME ACTION NAMESPACE VERSION ID BUNDLE_SERIES COMMENTS
  
  timestamp AM ROLLBACK SERVER 11.2.0.3.5 PSU11.2.0.3.5
  
  is it possible that I can remove the rear roller of results dba_registry_history results
  
  as this rollback entry or apply the patch intervals

  Hello again;

  The short answer is no.

  My opinion is that I would not try it because it is a SYS belonging to view and it seems that Oracle has not provided a safe method for this.

  Found two docs more than Oracle and added to my previous post.

  I hope that they solve the problem.

  Best regards

  mseberg

• I'm trying to install Office note 8.1 but get this error message immediately after you enter the serial number and authentication code.

  Remark Office OMR

  I've been remark office omr 8.1 installed on 32-bit windows vista (intel pentium DC) for the last year laptop. Now plan to move it to a more recent hardware and the OS.

  I'm trying to install Office note 8.1 on Windows 7 Home Basic 64 bit (on laptop AMD E450 DC base). But am getting this error message immediately after you enter the serial number and authentication code. I tried to install different versions of the .net Framework (from 1.1 to 4), but nothing seems to solve the problem.

  I even tried to install it in mode compatibality. but no luck.

  Here is the error message (between BEGIN and END lines)

  -BEGIN-

  An error occurred instantiating the object of authentication. Please restart your computer, and they run the Setup again.
  Error number = 2147219705

  Error = description

  ------ END--------

  Appreciate any help

  Thank you

  SJ

  Just for the follow-up of this: I have sent comments, and they responded in 20 minutes with:

  Please contact the Support of the note.  I'm sorry that you are experiencing this error, but it seems by the error message that you install note on a Windows 7 computer.  This error is caused by a Microsoft security update that was released in July 2011 for Windows 7 and caused upward to change our software.  Here is access to our Download Center for you to install the version 8.4 of note.  You will use your current serial number, license key and authentication code.
  They then provided a link to their Download Center where I could download 8.4
  E - mailer to * address email is removed from the privacy * and they will answer you. They have great customer service.

• 48 new important updates after you apply the language pack

  Original title: Windows 8 updates after you have applied the language pack

  Hi all

  I bought the laptop with the English version of Windows 8 in 2013 and a few days ago decided to change the default language to Spanish.

  Language Pack has been successfully installed. But when I checked for Windows 8 updates available (I subscribe) I have seen that it is necessary to install 48 new important updates.

  Regularly, I installed all necessary updates. And now, after you apply the language pack, I have to repeat all the facilities of updates once more to be up-to-date and continue with Spanish? Or I missed something during the installation of the language pack?

  Thanks much for the advice.

  Kind regards

  Sergei Sumskoy

  Hi Sergey,

  We will first check if the 48 new important updates are already installed on the computer or not.

  To view your history of update

  1. Open Windows Update by sliding into the right edge of the screen and click on settings.
  2. Click change PC settings, and click then on update and recovery.
  3. Click view update history.

  Method 1:
  If the important updates are already installed on the computer, you can install all important updates available.

  Method 2:
  If all updates are already installed on the computer, you can reset the Windows Update components and check if there are new updates available.
  How to reset the Windows Update components?

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the the Microsoft Knowledge Base:

  See the article for more information.

  Add a language or keyboard

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• I don't have a redemption code after you apply the student plan

  I don't have a redemption code after you apply the student plan

  Please visit: https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

  Do check host files mentioned in step: 3 article.

  Let me know if you still face barely...

  Concerning

  Megha Rawat

• Image not updated after you apply a filter in CS6

  Image not updated after you apply the filter to the CS6. Preview is generated, but filter does not apply. Very sporadic so I guess this could be a problem of memory. Help on Win7, AMD Phenom II, with 8 GB of memory.

  Post edited by: claytor1999

  Yes - thank you! It seems to turn off graphics solves the problem. Appreciated.

• Disabled Internet access after you apply the updates of Windows

  After you have installed the latest Windows updates, I lose all connection to the Internet. I can still see my network, but not do anything on the internet.

  I spent an hour yesterday on the phone with my ISP check it was their system, not a hardware problem with my modem or router.  I spend another 1/2 hour on the phone with Dell technical support.

  It turns out the issue was my DNS has been altered, and the only way to recover was to perform a restore of the system for 8/16.  Everything was going well after that... until Windows Update automatically ran last night, install the last two so-called critical updates. I don't know what is causing the problem, but my DNS was wiped out again, and I had again back 8/16 recovery point.

  I disabled Windows Update for the moment because I don't know how else to solve the problem; in the absence of any change to my system, I suspect it's updates are something to my DNS. Does anyone else have this problem? Is there a better solution or another way to solve the issue that doesn't require me avoid all Windows updates in the foreseeable future? Is there a way to know if/when a later critical update solves the problem created by these?

  The cause has now been identified as McAfee updates and no Windows updates - they were both released at the same time.  If one of your PCs have McAfee so that they might be confusing your test results.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary.  The McAfee link applies to consumer products but there are corresponding communications for businesses - see, for example,.

  Corporate KnowledgeBase - DAT-6807/6808 causing problems with VSE 8.8.x

  I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, as ads from McAfee have said since then, the application did not refer to his database of threats correctly [so, eventually, the variation in the degree of severity in the user experience]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the McAfee Development removal a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

  - - - - - - - - - - - - -

  If you do not have McAfee then Windows update that kb2705219 could be another cause that uninstalling that appeared to solve the problem for some users.  But, personally, I think they could only reached a temporary fix [I thought my PC was OK at the time, but it turns out does not do the trick, as explained above] to uninstall an update - panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

• error appear even after you quit VI

  Hello

  I'm short of LabVIEW, which is already developed code. An error window is popping up "error VCAN: 75 ' after pressing Quit/stop button in this VI. even after the click on the OK/Cancel buttons, reborn the error pop up. I have observed the vi which I ran before is already stopped.

  So, whenever I need to kill the process in Task Manager to get rid of the error pop up.

  could you please suggest what might be the reason behind this.

  I think I wrote this code.

  Watch the VCAN producer loops that are launched in a dynamic way.

  Reference with the ValueCAN API to find out what error 75 actually is.

  Then decide if you want to shut up the error or cope.

  Probably should have a more graceful exit on ValueCAN errors in this program as well.

• After you apply Windows XP - SP3 post upmedia locks or crashes or both

  I have a HP Pavilion a1420n (Media Center) and Pavilion HP laptop also with Media Center, after applyig SP3 the HP Pavillion locked up and crashed.  After 4 tries to apply the updates, it crashed twice, locked up once and was not able to backup or restore.  I was able to get SP3 to apply the Media Center, but it does not start I need help, I am not a technician.

  OK, if the system was to SP2 before you apply SP3, then you have updated such as advised by Microsoft. I did a bit of research on this subject and even if you aren't alone, I couldn't find a definitive answer. Another contributor to this thread (ElderL/Jose) could help. If Jose can help, your problem is definitely a 'hard' nut

  Unlike Jose, I have MCE and although I tried, I was unable to reproduce your problem.

  My best advice for a possible solution is to do a clean install. I've published some guidelines here...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/after-going-through-a-recovery-process-on-a-win-XP/54a108ac-Fe59-42d2-A146-8b830077aff4

  .. . If you need more information let me know.

  Tricky

• Validation error certificate ORA-29024 after you apply the 11.2.0.4.16 hotfix?

  Hello

  so far, I made a few calls of https-webservice using utl_http, including authentication certificate without problems. He has worked not only for SYS, also for other users of the DB, then the ACL network were correct.

  Then I applied the patches #20583364 (11.2.0.4.16 for windows x 64) group. After the successful update, the Web service calls end in an ORA-29024.

  There is no difference if I use «select utl_http.request...» "or utl_http.begin_request (of course with .set_wallet before)-> always the same exception.

  After the patch rollbacking, everythings works again - it should be a part of the Group of hotfixes. But I have not found anything in the release notes, what could cause this.

  Does anyone of you have the same problem? How do solve you? What did I wrong or what I can check?

  Thank you very much in advance,

  Gerd

  After hours of investigation and trials and errors, I finally found it - I hope this can help someone else:

  UTL_HTTP - certificate ORA-29024 - Tony Reed response validation failure

  (and the link on: oracle - helps utl_http & wallets 12 c: failed validation - Stack Overflow of certificate)

  His response covers just the version 12.1, but it also works for version 11

  => Just remove the site certificate! The portfolio must contain only the root and immediate certificates!

• error message ' GetLogicalProcessorInformation... kernel32.dll ' after you apply the update to firefox 36.0

  I used firefox 35.0.1 and just applied the update 36.0 a few hours ago.
  After that, I was unable to run firefox.
  When I double-click on the icon of firefox, it bumps on the error message 2.
  1 of them is ' GetLogicalProcessorInformation... kernel32.dll. "
  and the other is 'exceptional unknown error (0xc06d007e) at 0x7c812a5b.

  those are key words of the message since I use firefox traditional version, do not know if I translate correctly.
  wonder if I can just get back to 35.0.1 and wait for another update to fix this

  Hi again, mozilla has just released an update for firefox 36.0.1 to focus on the issue: ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/36.0.1/win32/

• After you apply the fixit on windows update error 8000ffff PC starts "prosessing update 3 50%" and then stops again and again

  have had windows update problems for awhile now, 8 months or more

  I did E-mail support instructions for a few weeks with the help of computer technology

  Error 80070057

  Asked to uninstall Kaspersky AV

  same error

  Tech found the personal firewall that still on the pc of the previous installation using msconfig and unintalled using a program uninstaller for ca

  restarted and I have tried to update again and had error 8000ffff

  This led the tech to run microsoft fixit in default mode

  now, loops start mode PC rises to the small circular windows vista logo then says appliing update 3 3 50% sayes welcom and then stops, restarts, and loops on this subject.

  Can I get the pc to boot wihtout install updates?

  Tried safe mode and last good config known

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Get the Error Message: "user profile service service has no logon. Unable to load the user profile"after you remove the Windows Vista administrator account

  Original title: deleted Vista ultima. admin identity and admin authorization password for standard users will not work.

  I inadvertently deleted the admin. identity, I think in Vista Ultima. The photo shows still on the identities, but when I try to open the identity I get the following message, "user profile service service has no logon. User profile cannot be loaded. The admin. password does not work in any of the other identities now, so I can't do updates to most of my programs, such as windows. I can't open the control panel to add and change of identity.

  Hi JBRA47,

  You can consult the following Microsoft KB article and check if it helps to solve the problem:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.