Error: Failure, configuration of Windows updates

Original title: Please help me.

Hello. Today, I turned off my computer and it has been updated and I didn't wait but when I turned it on, it says "unable to configure windows updates. cancel the changes. do not turn off the computer"(I translated it fron Russian) and im wait for about 15 minutes. What should I do? I can't do anything, just on hold. Please help me

Original title: Windows 8 - updated

Hello

Did you do changes on the computer before the show?

I wish that you read the following article and follow the suggestions in the article.

"Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
http://support.Microsoft.com/kb/949358/en-us

System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

Hope this helps, if the problem persists with Windows updates, please get back to us. We are here to help you.

Tags: Windows

Similar Questions

  • Error code: 0x800A0046 while windows update sites access & installation of updates... ?

    Error code: 0x800A0046 while windows update sites access & installation of updates... ? Regds, 'a journey of a thousand miles begins with a first step."

    "Resolution of the error code: 0x800A0046".

    To resolve this problem, follow these steps on the client computers. Step 1: Verify the DCOM security

    1. Click Start and run, type Dcomcnfg, and then click OK.
    2. Expand Component Services and then expand computers.
    3. Do right click my computer and then click Properties.
    4. Click the COM Security tab
    5. Under access permissions, click on change by default.
    6. Check that the following accounts are listed:

      On Microsoft Windows XP-based and Microsoft Windows Server 2003 clients

      The collapse of this Expand table this table
      Account name Permission type Permission
      Gites, administrators or a user who belongs to the Administrators group Local access Allow
      System Local access Allow

      On clients based on Microsoft Windows 2000

      The collapse of this Expand table this table
      Account name Permission type Permission
      Directors Local access Allow
      System Local access Allow
    7. If either of these accounts is missing in the access permission box, follow these steps:
      1. Click Add, click Advanced and then click locations.
      2. In the location box, click the Local_Computer_Name and then click OK.
      3. Click Find now.
      4. Press CTRL and click the required account names, and then click OK twice.
      5. In the group or user names box, click an account that you have added, click Local access in the permissions for box Account_Name and then click to select the check box in the column allow.
      6. Repeat step 7 for all accounts that you just added, and then click OK.
    Step 2: Check the DCOM default properties
    1. Click the default properties tab.
    2. Make sure that the following configuration:
      • The Enable Distributed COM on this computer check box is selected.
      • In the default authentication level box, the connection is selected.
      • In the default impersonation level box, the identification is selected.
    3. Make the necessary changes and then click OK.
    4. Restart the computer.

    Step 3: Verify that your user account is not a member of the guests group note this step applies only to computers that are running Windows Server 2003, Windows XP Professional, or Windows 2000 and that are not joined to a domain.

    1. Click Start, click settings, and then click Control Panel.
    2. Double-click Administrative Tools.
    3. Expand computer management, and then expand local users and groups.
    4. Click users.
    5. In the right pane, double-click the account that you used to log on the computer.
    6. Click on the Member tab of.
    7. Click guests, click on remove and then click OK.

    Step 4: Check the security descriptor in customers service updates automatic-based on Windows Server 2003 and Windows XP-based

    1. Click Start, run, type cmd, and then click OK.
    2. At the command prompt, type the following command and press ENTER to reset the security descriptor:
      SC tisb wuauserv D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)

      Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.

    Windows 2000-based clients

    1. Download the Subinacl utility. To do this, visit the following Microsoft Web site:

      http://www.Microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b & amp; amp; displaylang = in (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & amp; amp; DisplayLang = en)
    2. Double-click on the downloaded file and follow the instructions in the Windows Resource Kit Tools Setup Wizard. By default, the Subinacl utility is installed in the following directory:
      C:\Program Files\Windows Resource Kits\Tools
    3. Click Start, run, type cmd, and then click OK.
    4. At the command prompt, type cd C:\Program Files\Windows Resource Kits\Tools to move to the directory where the Subinacl utility has been installed.
    5. Type the following command and press ENTER:
      Subinacl/service wuauserv /sddl = D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
    1. Note in a domain environment, this security setting may be configured by a Group Policy object. If the problem is resolved temporarily after you type this command, a Group Policy object is probably configured. The domain administrator must modify group policy to include the appropriate security settings.
    Step 5: Check the local security policy

    Notes

    • This step applies only to the Windows Server 2003-based, Windows 2000-based, or Windows XP Professional computers.
    • If your user account is in a domain, this security setting may be configured by a Group Policy object that is located on the network. Contact the network administrator, or see the following article for more information Microsoft Knowledge Base:
      810739 (http://support.microsoft.com/kb/810739/) white paper: Troubleshooting Group Policy in Windows 2000
    1. Click Start and run, type gpedit.msc, and then click OK.
    2. Expand Computer Configuration, expand Windows settings, expand Security settings, and then expand local policies.
    3. Click user rights assignment.
    4. In the right pane, double-click on impersonate a client after authentication.
    5. Verify that the Service accounts and directors are included.
    6. If the Service account or the Administrators account is missing, follow these steps to add the account:
      1. Click on add a user or group, click Advanced, and then click locations.
      2. In the location box, click Local_Computer_Name, and then click OK.
      3. Click Find now.
      4. Press CTRL and click the required account names, and then click OK three times.
    7. Restart the computer.

    Step 6: Enable the persistence of user data in Microsoft Internet Explorer

    1. Open Internet Explorer.
    2. On the Tools menu, click Internet Options.
    3. Click the Security tab, and then click Internet.
    4. Click on custom level.
    5. In the settings dialog box, scroll down to the Miscellaneous section.
    6. Under the Userdata persistence, click Activate.
    7. Click OK two times.

    Kind regards
    Sohail Patel

    Regds, 'a journey of a thousand miles begins with a first step."

  • Getting errors on the 3 Windows updates: 2699988, 270162, 2685939. On the first try error codes were 0 x 80246007 and 0x8007010B

    Getting errors on the 3 Windows updates: 2699988, 270162, 2685939.  On the first try error codes have been 0 x 80246007 for all 3, try subsequent was 0x8007010B.

    Configuration is Windows XP SP3 with MSIE6 (test the system reads old browser).  Any suggestions?

    Original title: get errors on the 3 Windows updates

    Maybe: http://support.microsoft.com/kb/958042

    When you try to install the updates on the Windows Update Web site or the Microsoft Update Web site, you may receive a "0 x 80246007" error code

  • Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error." _

    RALink - network - 802.11n/b/g Wireless LAN USB 2.0 Mini adapter 379ko

    Windows Update has failed. "Error found: Code 8007001F Windows Update encountered an unknown error."

    I bought a wifi USB adapter and it is a driver windows 7 available on the manufacturer's website. RALink

    http://eng.ralinktech.com.tw/support.php?s=1

    My computer is a HP P6110f desktop computer. It came with a Vista 64 OS which I've upgraded to a Windows 7 Home Premium.

    I tried to install all kinds of different ways but were not able to make it work.

    Disconnect all other devices driver/software uninstalled and reinstalled all plugging adapter in each computer startup I tried port USB with adapter connected and also connect after windows load discharged from all applications running, including firewall and anti-virus

    Can you please help me solve this problem? I consider myself quite computer but I'm completely puzzled here.

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7
    Windows 7 discussion groups

    They may be able to help in obtaining the wifi USB adapter to work.

    8007001F (a device attached to the system is not functioning) TaurArian [MVP] 2005-2010-implementation to date of Services

  • error code 80070673 for windows update for vista

    error code 80070673 for windows update for vista

    Hello Jwisetoyo,

    Thank you for your message.  Please click HERE for a possible solution to your problem.

    See you soon

    Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

  • error than 8024200 D Windows Update encountered an unknown error

    I'm trying to install "Update for Rights Management Services Client for Windows Vista KB979099" but keep "error code 8024200 D Windows Update has encountered an unknown error" Please help... Thank you!

    0X8024200D SUS_E_UH_NEEDANOTHERDOWNLOAD

    Quote your full version of Windows (for example, Vista SP1;) Vista 64 - bit SP2) when you post in a forum or a newsgroup. Please do it in your next reply.

    1 try a reset:

    How to reset the Windows Update components?
    [Access KB971058 via Internet Explorer (32-bit) only; Run the difficulty in the default and aggressive modes]
    http://support.Microsoft.com/kb/971058

    2. If no joy, see if you can download/install the update manually via the link to this page: http://support.microsoft.com/kb/979099

    2B. or you can just hide this non-security update & move on with your life. See http://www.sevenforums.com/tutorials/24376-windows-update-hide-restore-hidden-updates.html (for Vista & Win7)

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Whenever I try to find new updates for my computer error 80248009 appears under Windows Updates. I have not installed new updates on my computer in a month because of this problem. How should I do so that I can update my computer?

    Whenever I try to find new updates for my computer error 80248009 appears under Windows Updates. I have not installed new updates on my computer in a month because of this problem. How should I do so that I can update my computer?

    Error when you try to use Microsoft Update or Windows Update Web sites to install updates: "0 x 80248009":
    http://support.Microsoft.com/kb/956700

    Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

    When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

    http://support.Microsoft.com/kb/946414

    «"Error when you download updates using Windows Update or Microsoft Update: 8000FFFF"»

    Follow the information given in the above link to solve your problem.

    See you soon. Mick Murphy - Microsoft partner

  • Error code 80070490 in Windows Update (5 important updates failed)

    I am very close to give up because I tried to solve this problem for days now :( I get an error every time in Windows Update (error Code 80070490) and I tried so many times to install these updates, but the exact same error happens every time. I tried to delete all the files in the folder C:\Windows\SoftwareDistribution and start again, but it happens again and again.

    5 updates failed are as follows:

    Update for Windows Vista KB2756822

    Update security for Windows Vista KB2705219

    Update security for Windows Vista KB2731847

    Update for Windows Vista KB2661254

    Update for Windows Vista KB2749655

    My Windows/OS is Vista, and it's a real version enabled.

    Please help will highly appreciated!

    Joe

    Your problem KB948465, which is the update to Vista SP2.

    2016-03-19 20:21:22, info CSI 000001e8 [SR]

    Cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2016-03-19 20:21:22, 000001ea CSI Info [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

    2016-03-19 20:21:22, 000001eb CSI Info [SR] this element is referenced by [l:158 {79}] "' Package_16_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 49_neutral_GDR" "

    Your operating system is corrupted. To eliminate the problems on your computer, you need to restore factory settings and rebuild your computer system.

    A recovery of the system partition contains a copy of the operating system as it was when the computer was purchased new. Using the copy of Vista, you can restore the computer to factory settings. Of course you must back up your data files to an external before restoring support as the process reformats the disk thus clearing all existing files before writing new files.

    Please read Chapter 13 (page 33) Manual:
    5738 http://global-download.Acer.com/GDFiles/document/generic%20UG/generic%20UG_Acer_1.0_A_A.zip?acerid=633967123940952836&STEP1=notebook&Step2=aspire&step3=aspire & OS = ALL & LC = en & BC = ACER & SC = EMEA_27

    The manual suggests that you have an option to restore the operating system and retain user data that I've not seen in a manual before. It is worth trying because it reduces the work involved but I would again as a precaution, back up your data files on external safety precaution if things go wrong.

  • Error Code BC2 when Windows Update links intall Windows Live ID

    I get an error code BC2 whenever Windows Update tries to install Windows Live ID

    Hello

    ·         Are you able to install any other Windows update?

    ·         You will remember to do recent changes on the computer before this problem?

    I suggest you follow the steps mentioned below:

    Method 1:

    0x00000BC2 error means Error_Success_Reboot_Required. This means that you must restart the computer. If you have already connected to a live application, you can restart the computer and check if the problem occurs.

    Method 2:

    If the previous step fails, follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    For your reference if you have any particular Windows installation updated question. You can follow the steps in the link:

    http://support.Microsoft.com/kb/822798

  • Error Code C800044E for Windows updates.

    I get this error code c800044e for Windows updates. I tried the support center to the bottom of the load and fix, but it does not resolve this error. Help, please.

    Hello

    1. all the troubleshooting steps have followed so far?

    2. the updates could not be installed?

    3. what fixit did you run?

    4 have have there been recent changes made on the computer before the show?

    I suggest you to follow the steps mentioned below and check if it helps.

    Method 1: Put the computer in a clean boot state and try to install the updates.

    http://support.Microsoft.com/kb/929135

    Note: After installing the updates, follow step 7 in the link provided to return the computer to a Normal startupmode.

    Try to download the update and install.

    Download Center.

    http://www.Microsoft.com/download/en/default.aspx

    Method 2: If the problem persists with Windows updates, the problems with the installation of the updates.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 3: How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Then try to reinstall updates.

    I hope the information is useful!

  • I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

    I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

    Hello

    I apologize for the delay in responding.

    This error means that a file (CBS Manifest) that is needed to install updates is corrupt. I suggest to try the procedure described in the following Microsoft Support article and check if it helps. This article consists of the steps to troubleshoot and correct this error.

    https://support.Microsoft.com/en-us/KB/958044

    For more information, you can consult the following Microsoft Help article.

    http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070490#1TC=Windows-7

    Please do not hesitate to visit our Web site for any help with the Windows operating system.

  • Failed to update Windows 8 (KB2756872, KB2768703), happens to 30% then get error "failure Configuring Windows updated. Changes in return ".

    I installed 2 updates.

    I installed both of them using the standalone installer which.
    First, I checked the updates using Windows updates and then installer of stand-alone download from the link more information if I can use this update later.

    Here are the 2 updates I try to install:
    1 Windows8-RT-KB2756872 - x 64
    2 Windows8-RT-KB2768703 - x 64

    I rebooted my system after installing the updates.
    Windows configures updates up to about 30% and the system gets stopped and restarted.
    Then he went it 100% and all of a sudden, I got a message something like:
    "Failure of Windows updated. Changes in return ".
    It is just returned

    Here are all the logs files (CBS.log, WindowsUpdate.log, WindowsUpdate (1) .log)
    http://bobdn.com/files/logs.zip

    Please tell me how can I get the update installed successfully.

    I finally solved my problem with the update kb2756872 ("update failed, returning of changes"). It was caused by the reserved partition Windows is not set to active (I dual boot using GRUB). Go to the Control Panel-> administrative tools control->-> computer managementdisk management and make sure that the reserved partition is marked 'Active'. This also solves many other problems I experienced as not able to activate Windows startup settings.

  • STUCK IN: Configuration of Windows update failure. Restoration of the changes.

    Hello

    I get very frustrated by that. I restarted my computer and updates began to install automatically. However, he stopped and then I got the message "failure Configuring Windows Updates. Restoration of the changes. Do not turn off your computer. I waited for an hour and a half, and nothing happens.

    I read of fixes for this. but they say I have to restart the computer or access here or there, BUT I can't do it. It is stuck on the screen with the message, and I'm not supposed to turn it off. What should I do?

    I think it is absurd that the computer does not ask me if I want to install the updates now or later. What happens if I had to give a presentation in school or I was in a business meeting? In addition, how is it possible that your own updates to dirty computers? HOW? Has any sense at all. You force me to update and your update of the computer mess.

    I need to know what to do, I need to access my computer. I've lost enough time already.

    Thank you.

    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    https://support.Microsoft.com/en-AU/KB/949358

    or

    Perform a SFC scan to see if there is any corrupt system files.
    Use the System File Checker tool to repair missing or corrupted system files
    https://support.Microsoft.com/en-AU/KB/929833/en-us

    or

    Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness
    https://support.Microsoft.com/

  • Failure to configure the windows updates. Restoration of the changes

    had done it before, but I have to update my laptop, so he returned to windows 8 and now I am installing updates first, but it says FAILURE CONFIGURATION WINDOWS RETURNING CHANGES don't TURN OFF YOUR COMPUTER. What causes this? :( I want windows 8.1 return

    Original title: difficulties in the installation of updates to the update of Windows 8 to 8.1

    Hello

    This could happen if the updates have not been installed correctly.

    I wish that you read the following article and follow the suggestions in the article.

    "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates
    http://support.Microsoft.com/kb/949358/en-us

    Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

    System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    Hope this helps, if the problem persists with Windows updates, please get back to us. We are here to help you.

Maybe you are looking for

  • Satellite L20-149: is it possible to replace the video card?

    is it possible to replace the video card in my laptop L20-149? because I can not play on my video card intel because its slow and boring... don't worry not about the warranty because its not valid anymore

  • Instrument LabWindows DLL in memory DLL handles

    I am rewriting some of the software of test of production for the company I work for. Development requires that I rewrite all instrument drivers placing them in a DLL. Then I re-wrote the functions test placing them in another DLL. Adding to what the

  • Advanced Routing - IP strange

    Cisco router: WRV210 I noticed a strange what IP listed in my Advanced Routing Table, under address LAN IP of Destination: Local network destination: IPSubnet MaskGatewayInterface 10.32.156.1 255.255.255.255 0.0.0.0 WAN 192.168.1.0 255.255.255.0 0.0.

  • HP7515 All-in-One. "Inaccessible scanner. Scanner communication cannot be established.

    Running Windows 7. LCD shows "No connection": no computer is connected.   I recently installed McAfee Total Protection software, but have disabled McAfee over this problem and there is no solve the problem.  I also completely removed McAfee with no r

  • The job status window interface stopped working Dell AIO printer 968

    I bought a new computer with window 8, native. "Each connection with my previous devices ran quite well when it is installed automatically, except for AIO printer 968 Dell, I have installed a new driver from Dell, more precisely prescriptions Scanner