Error FlexFlash
It's a serious warning? Any ideas would be greatly appreciated.
How many SD cards you have on the blade? Are actually using SD cards?
Could you please reset the Flex Flash controller to see if the alarm is turned off?
Reset of the controller of FlexFlash
Step 1 in the Navigation pane, click the Hardware tab.
Step 2 tab on the equipment, develop equipment > chassis > chassis number > servers.
Step 3 click the server for which you want to reset the FlexFlash controller.
Step 4 in the pane, click the inventory tab.
Step 5, click the sub-tab of storage.
Step 6 area In the Actions, click Reset FlexFlash controller.
Step 7 click Yes to reset the FlexFlash controller.
You can also re - ack the server and restart the MMIC after that to see if the alarm gets erased when the reset of the controller flash flex does not erase it.
Kind regards
Qiese Sa'di
Tags: Cisco DataCenter
Similar Questions
-
FlexFlash scrub does not seem to work
I have a scrub for FlexFlash policy configuration to be cleaned once I have to disassociate the profile of a server. I installed ESXi on a slide, and then dissociated himself from the profile and waiting for the blade to come back with nothing installed. Much to my surprise, ESXi was still installed.
I have attached what looks like my policy and I think that it is properly defined.
It may be unrelated, but I also noticed that there is an error with the RAID health for my FlexFlash controller. Said degraded, although I'm not sure why as the SD, cards are 2 new cards. I have attached a screenshot for this as well.
Hi Joseph,.
I see you have a RAID lead to Virtual FlexFlash degraded on your server.
May I know if the listed reason is FFR_STATE_ENABLED_PAIRED_INVALID_SECONDARY?
Suspect: CSCui67901
https://Tools.Cisco.com/bugsearch/bug/CSCui67901/?reffering_site=dumpcr
The solution is to re - emphasize the blade twice with a policy of scrub flexflash in place.
This should get the raid to a State of health and rub the flash flex.
Thank you
Majid
-
How do I know if the hypervisor is installed on FlexFlash
I have a UCS C240 Standalone client server which has a card SD of FlexFlash installed in Slot 1, but none in Slot 2. The FlexFlash controller displays the State of health as"RAID"degraded "because of course there is no other mirror card. The MMIC runs firmware later than version 1.5, which means that the controller is compatible with RAID I think reset the controller FlexFlash should clear the error. However, I would like to know if the hypervisor (ESXi) is installed on the FlexFlash or not as this would determine whether or not I can reset without failure.
Where would I go to find out if the hypervisor is actually installed on the map of FlexFlash or normal storage in the LSI Raid Controller?
See you soon,.
Tom
Tom,
You are right, that the degraded RAID is due to the fact that the drive is unable to form RAID with a single SD card. The reset should clear. Discover the boot order and see what the server is configured to start from:
The Flexflash controller may appear as a HV partition:
http://www.Cisco.com/c/en/us/products/collateral/servers-unified-computi...
HTH,
Wes
-
Flexflash controller is in a lamentable state after firmware upgrade
Hello everyone
I get an error message indicating that our flexflash is unhealthy after firmware update. Say it running old firmware. I didn't even know that us had flexflash on our systems and do not now see update the firmware. I read that you are supposed to see in the storage tab, but do not see. How to solve this error?
I came across the same thing after the 2.2 2.2(5a) (3rd).
Everything was fine, but who. He was a minor.
Was the only thing I could do about it, decom the blade, take it out, put back in, re - ack the server. Then he went away.
(We use the FlexFlash and it caused no problems before or after the warning). You can try to reset the FlexFlash controller, but I don't think that will work for this particular minor warning.
-
Uninstall software update Apple says error in seller contact package package unstaller
Try to get itunes working to make a backup of my faulty iphone before repair.
First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.
Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.
Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.
Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
I'm new to apple and get a syntax error when you use SUMIF. In my table, I just need column F to test the value of column E. If it is greater than 0, then divide by 20. Thank you!
In cell F1
= E1/if(E1>0, 20, 1)
fill down as needed
-
An error in this Applescript that I can't understand
Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:
runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.
Thanks for any help with this problem,
Mike.
property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary
property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}
the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")
the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")
game runScript to 1
tell application "System events".
the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)
the value allVolumes to name of every element of disc of rootVolumes
the value numofallVolumes to the County of allVolumes
Repeat with the present book in allVolumes
say application 'Finder '.
if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then
if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2
runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted
runScript If = 2 then
try
duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume
on error number errorNumber errorMessage
_error value of errorMessage
_errorNum the value to errorNumber
If errorNumber is -15267 then
display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10
If the returned button of result is 'No' then
Error number-128
on the other
If the result is 'OK' or back button gave up lead and then of
eject the present book
display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5
return
end if
end if
end if
end try
Try
duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume
on error number errorNumber errorMessage
_error value of errorMessage
_errorNum the value to errorNumber
If errorNumber is -15267 then
display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10
If the returned button of result is 'No' then
Error number-128
on the other
If the result is 'OK' or back button gave up lead and then of
eject the present book
display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5
return
end if
end if
end if
end try
display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10
If the returned button of result is 'No' then
Error number-128
on the other
If the button returned of result is "OK" or gave up a result then ejection of the this book
display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5
end if
end if
end if
end say
end Repeat
end say
The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:
If the present book is in the ignoredVolumes then
game runScript to 1
on the other
if (the present book as text is not '. ') DS_Store') then
if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2
end if
end if
Of course, you need to remove a "end if' the end of the script.
-
error message when try to sync the iPhone, "invalid response from the device?
What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?
-What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.
-
Hello
I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.
I wanted to know if there is a lasting solution to this problem.
I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.
Hello PavanGJ,
Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.
Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:
OS X El Capitan: If you have problems with startup items
You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.
You can also test the issue in a new user account.
How to test a question in another account on your Mac - Apple Support
Let us know if that helps.
Take care!
-
A fact error 4014 showing each time after all the steps
One of my friends has an iPhone 5 s and he lowered his 10 9.3.5 iOS iOS iPhone it started and inquired "side update" to the rest of the new software update points, but suddenly her iPhone off and does not turn, does not yet show the Apple Logo. I tried to restore it with the new version of the iOS 10.0.2, I file the software theipsw and then restoring the iPhone, iTunes showed me the message "waiting for iPhone" and ultimately showed me a message by this sentence "iPhone" his name' siphons ' could not be restored.» An unknown error occurred (4014).
I checked the list of steps that Apple suggests their, but nothing happened then, always showing me the same error number. What should I do?
Thank you for your help and appreciate it.
I found the solution. Just type here for others with the same problem to solve their problems.
While the "iTunes with cable" sign is showing and in your computer, showing you "Waiting for iPhone" and things occur, you should restart your iPhone (hold sleep/wake low and low home together for a few seconds) implemented after this attempt to restore your iPhone again you should recover your iPhone software.
Thank you for your support and more.
-
Playgrounds are learning to code 1 download error
I recently bought an iPad Mini 2 specifically so that I could use the app to playgrounds to learn about Swift. Whenever I try to download the playing field 'Learn to Code 1 - basics of the swift' I get an error that says: "not taken download error supported URL. I uninstalled and reinstalled the soft playgrounds several times. Other playgrounds (as 'learning to Code 2 - beyond the basics') download very well. How can I bypass or fix this error and get the first playground of lesson?
Finally, the playing field is downloaded successfully!
-
Error Java Run After downloading the new Sierra
Java is up to date and I get this error message. A couple of times, I have "updated" restarted. Still happens.
Hi cjshrad,
Thank you for contributing to the communities of Apple Support. I see in your message you receive a Java error after upgrade to Sierra on your Mac. I'd be happy to help with this!
First of all, try to install the Java for OS X package found here:
Download Java for OS X 2015-001
The next step, if you still see this error, I recommend that you completely uninstall Java from your Mac by following the steps listed here:
How to uninstall Java on my Mac?
Once you're done, use this link to download and install the latest version of Java for your Mac:
Download Java for your Mac - Apple SupportTake care!
-
"error recovery main area".
Hello
I can not access my old video files of my 6 16 GB iPhone, I'm using iOS 10. When I try to open the videos that I always meet the message 'area main-fetching error' I can't specify when this problem started, but I'm sure it was good when I was with iOS 9.3.3 However, recently filmed videos works perfectly.
Same thing here. I bought the new iphone and took the backup from your old phone, but the videos do not work.
-
Am having a problem of signing in the App Store and iCloud on Preferences system on my MacBook Pro, getting an error response whenever I tried signing in.
Here are the errors:
- Are you sure that you typed your password correctly 100%? (sry, but that would be classic
- have you tried to reset your password?
-
On my iMac (late 2015) El Captain 10.11.6 this morning I started getting this error on the log in "a tracking file for CoreTelephony operation failed, perhaps you miss disk space. Details "error opening the file/tmp/ct.shutdown, err = operation not permitted"
Can someone tell me how to fix it? Some of my apps are now crashing.
M
I have also this problem too and the same day
Maybe you are looking for
-
5th generation iPod Touch battery drains in 20 Minutes
HEy, I got my iPod almost 4 years (since Christmas) and in approximately the first year I noticed the battery was not well kept and in 2014 (when I got my iPhone 5 c), I decided to stop using my iPod because the battery lasted about 45 minutes. Since
-
I forgot the security answer and I want to change it... How?
IiPhone 4 s
-
Satellite P10 804: cannot modify the sound volume control
Control sound Volume at the front of the unit is fixed now in all and cannot be changed. Can I fix it?
-
Qosmio F30: I want to upgrade to Core 2 Duo CPU
I WANT TO UPGRADE TO A CORE2DUO PROCESSOR ON THE QOSMIO F30. BIOS MUST BE VERY WELL I JUST FLASHED SUCCESSFULLY. I WAS READY TO UPGRADE, BUT I'VE READ ADVICE FORM TOSHIBA NOT AS SOME TYPE OF TAPE IS USED ON PROCESSORS ON MOTHERBOARDS FOR TOSHIBA. CAN
-
CreateDataFileHeaderAccess (Tiara 2014)
Hello in Diadem 2012, I used the DataFileHeaderAccess command to access the properties of the root of my TDMS files. The properties are at the lowest level (not in groups or channels). In 2012 my code looks like this: Set oMyDataFileHeader = DataFile