Error http//go.microsoft/fwlink/?linkId=144689 occurs at each reboot

Similar Questions

• error 0x8007041E on Microsoft Update

  This is the error code I get when you use Microsoft Update.  When I had this problem, the forum told me that it was caused by virtual memory problems, I've had recently.  He told me to let the computer (or Microsoft) set my virtual memory / page and I went and did it and restarted my computer.  However, I am still not able to check updates.  Can someone help me please?

  The site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem.   [Error number: 0x8007041E]

  Hello

  I suggest you to perform online analysis and checking if the same problem occurs:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb.

  I closed my computer and he says there are a few updates that should be installed in front of him close. I let it run and my computer off. Now, when I turn it back on I get the following error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb. And now I can't get my computer to connect to a wired or wireless internet connection, and it seems to be running slow. Any ideas what it is or how to fix it?

  Also, I tried to restore my computer to a few days ago and running my software virus and nothing is changed.

  Hello

  Have updates you installed? You can check this in the history of the update?

  Step 1: To check the update history, follow these steps:

  1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
  2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.

  Step 2: Refer the article that could help you solve this problem.

  You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box
  http://support.Microsoft.com/kb/927385

• Why do I get "error 1325." Microsoft "is not a valid short file name" when I try to install the 1.41 Borderlands update? "

  I am running Vista Home Premium SP2.  I bought the game Borderlands of the year edition DVD (or CD, I can't remember which).  To get the downloadable content, the instructions direct users to a website that says that you should update to 1.41.  After downloading the update of this website (several times) and try to install (including using the suggestions on support.microsoft.com/kb/2438651), I always get "error 1325." Microsoft "is not a valid short file name"

  Hi Mike l. Mpl Vly

  I suggest you to refer to the following article in the Microsoft Knowledge Base and check if it works.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  I hope this helps!

• Error HTTP 403.6 - Forbidden: IP address, trying to access the employment Portal

  I get an error, HTTP 403.6 error when I try to go to monster.com to post jobs online. It is a laptop from home with no connection to work. It says that I need to see the network administrator and I have no one. What can I do to remove the IP address of the banned list?

  * Original title - 403.6 error

  Hello

  1. what version of Internet Explorer is installed on your computer?

  Click on the link below for more information on how to determine the version of Internet Explorer installed on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

  2 has there been any changes to your computer until the problem occurred?

  3. are you able to connect to the network/Internet?

  4 are you facing this problem with some sites or with any other sites?

  5 is this computer logged on a domain network, or is it a stand-alone homegroup computer?

  Error HTTP 403.6 Forbidden: IP rejected
  This error occurs when the server has a list of IP addresses that are not allowed to access the site, and the IP address, you are using is in this list.

  If your computer is on a domain network, then you may need to contact your system administrator to solve this problem.

  If your computer is a stand-alone computer then I suggest to follow the troubleshooting steps in the articles below and check to see if that fixes the problem on your computer.

  Description of the codes of State of Microsoft Internet Information Services (IIS) 5.0 and 6.0

  http://support.Microsoft.com/kb/318380

  In IIS 7.0 and IIS 7.5 HTTP status codes

  http://support.Microsoft.com/kb/943891

  Error message: 403.6 - Forbidden: IP rejected

  http://support.Microsoft.com/kb/248043/en-us

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• After the upgrade to Windows 10, I was not able to access my email to Outlook Web Access. I get this message: error HTTP 401.2 - Unauthorized: access is den

  Firefox stopped 40 access Outlook Web access, a week ago. I always get the following message:

  You are not authorized to view this page
  You have no permission to view this directory or page using the credentials you provided as a Web browser sends a header field WWW-Authenticate the Web server is not configured to accept.

  Please, try the following:
  Contact the Web site administrator if you believe you should be able to view this directory or page.
  Click the Refresh button to try again with different credentials.

  Error HTTP 401.2 - Unauthorized: access is denied due to server configuration.
  Internet Information Services (IIS)

  Technical information (for support personnel)
  Go to Microsoft Product Support Services and perform a title search for the words HTTP and 401.
  Open IIS Help, which is accessible in IIS (inetmgr) Manager and search for topics titled words of security, authentication and Custom Error Messages.

  Thank you for your help.
  Najib

  Firefox 40 change something that affects authentication: is no longer, it appears a name of user and password dialog box to prompt for credentials for embedded resources if they are hosted on a different server. These can include a framed page, an external script or an image, for example.

  If you right-click on the error page, "This frame" appears on the menu? If so, who might follow and Open Frame in a new tab to see if it is hosted on a different server? If you reload the page without frame, it works normally?

  If you are unable to work around the problem by unframing page, you can undo the change as follows. Of course, please be wary of this guest appearing on other sites where it can be to get you to reveal your credentials to another site.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste auth and make a pause so that the list is filtered

  (3) double-click the preference of network.auth.allow - subresource-auth and edit the 1 to 2, and then click OK

  • 1 shows the dialog box logon only for pages framed, images, etc., hosted on the same site
  • 2 allows the connection to pages dialog box framed, images, etc., hosted on any site

  -What changes anything with your OWA server? If not, you can restore its default value definition; It must be something else.

• Can't access a site error: HTTP 400 Bad request.

  Original title: problem getting on a Web site

  HTTP 400 Bad request returns constantly to a site Web im trying access to the

  Hello
  Normally, this is a Web site log in the error message.
  Is it necessary that you connect to the site in question?
  Exactly when this started happening?
  I suggest you contact the Web site "webmaster to ensure that your account is to this day.
  http://support.Microsoft.com/kb/826437
  hope this helps,
  B Eddie

• try to open a link sent to me on my Iphone, but it gave me error HTTP and 404 message

  Description: The requested resource is not available

  Apache Tomcat/6.0.29

  Hello
  1. what operating system is installed on the computer?
  2. you open a link on the Iphone or computer?
  3. If you are opening on the computer that you use Internet Explorer browser to open? If so what version?

  Method 1:

  If you try to open a link on the computer, follow the below mentioned article and see if that helps.
  Get help with the Web site (HTTP error) error messages.
  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-website-error-messages-HTTP-errors
  Method 2:
  If you try to open a link on the IPhone, you can contact Apple for additional assistance.
  Here is the link:
  https://discussions.Apple.com/community/iPhone

• Cannot open the site of error: HTTP 403 Forbidden

  Original title: This error (HTTP 403 Forbidden)

  Internet Explorer was able to connect on the site, but it doesn't have permission to view the Web page. How can I solve this problem?

  Hello

  (a) only happens on all websites, or that a particular Web site?

  (b) have you tried with other Web browsers?

  Method 1: Try the steps suggested by Aziz of the thread below and check if this can help:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/IE8-shows-error-403-forbidden-access-denied-by/4c2f45c7-1dfe-4E59-8C2A-a53e51c8489f

  Method 2: Error 403 "access denied/forbidden: http://support.microsoft.com/kb/245142 .

  Hope this information is useful.

• Updated 646 error Code to Microsoft Office 2010 Home and Office Edition using the Version Windows 7 Professional 32 - Bit

  I just bought Microsoft Office 2010 & individuals.  I was prompted to install the following updates 9: definition update for Microsoft Office 2010 (KB98726), Microsoft Office 2010 security update (KB2289078), Microsoft Office 2010 security update (KB2289161), update security for Microsoft Publisher 2010 (KB2409055), update security for Microsoft Word 2010 (KB2345000) updated for Microsoft Office 2010 (KB2202188), update for Microsoft Office 2010 Validation of the file (KB2413186) update for Microsoft OneNote 2010 (KB2433299), update for Outlook Social Connector (KB2289116).  I tried several times to install these updates by using Windows Update without success after the resolution of issues of update could not solve the problem.  Is it possible to install these updates on my computer & to receive future updates without more questions?  Extremely frustrating after spending more than $250 for the software.  Help, please!  Thank you.

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>

• Vista - Error Code: 646 (Microsoft Office 2007 updates)

  I was warned by Windows Update I got Microsoft Office 6 "Major updates" dealing with security to download and install.  I am running Vista Home Premium operating system.

  6 updates are listed here:

  (1) security Update for Microsoft Office Excel 2007 (KB982308)

  (2) security Update for Microsoft Office InfoPath 2007 (KB979441)

  (3) update for Microsoft Office PowerPoint 2007 (KB982158)

  (4) update for Microsoft Office Word 2007 (KB982135)

  (5) security update for Microsoft Office System 2007 (KB982312)

  (6) security Update for Microsoft Office System 2007 (KB982331)

  Updates download successfully.  It seems that they are installed correctly, 1 first 6, then 2 of 6, etc..   At the end of the process, I get a message that "some updates were not installed."  In fact, none of the 6 were installed.   Then I get an error message:

  Code 646: Windows Update encountered an unknown error.

  9 results for "WindowsUpdate_00000646" "WindowsUpdate_dt000"

  1.	1 Windows Update error 80072efd
  2.	2 problems with installing updates
  3.	3 error code Windows Update 80070422, 80244019, or 8DDD0018
  4.	4 Windows Update, error 8024402C
  5.	5 Windows Update error 80070003
  6.	6 Windows Update error 80070643
  7.	7 Windows Update, error 8024001
  8.	8 Windows Update error 800f020b
  9.	9 Windows Update error 800f0828

  I have gone through each of them and tried to perform the actions suggested without success.

  I also tried downloading/installation these one by one, without success.

  Help, please.

  Hi all

  A new article was created to solve the problem, this KB includes a fix specifically for this issue. Here is a link to the KB:

  http://support.Microsoft.com/kb/2258121

  Thank you

  Bobby

• error code of Microsoft office update 646___i go ahead and they updates are downloaded, but when it will install fails error code 646 said, I tried at least 10 timesto install them, but every time fails.

  I tried to install the update for Microsoft office word 2007 (kb974561), filter junk e-mail in microsoft office outlook 2007 (kb976884), the michrosft Office info path 2007 (kb976416), Essensials update for microsoft office system 2007 (kb973704), and update of security for microsoft office excel 2007 (kb973593)

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error message of Microsoft Visual C++ Runtime Library without program listed as the source of the error.

  I have a Microsoft Visual C++ Runtime Library error message, but no program is listed as the source of the error... the only entry is "program: C:\...» ».   I am running XP Service Pack 3 on a HP Mini.  HP support center suggests that a driver is not loaded, or is corrupt and suggests also that I have to reinstall the program.  It is impossible, however, if the program in question cannot be determined.  Any advice?

  What is your system brand and model (mini HP something)?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  If the system works, what do you think might have changed since the last time it did not work properly?

  When is it and what you do when you see this message?

  You see it every time the system starts or when you try to start a program?

  There may be some clues in the event where log Viewer, but has first:

  Microsoft offers several different versions of the Microsoft Visual C++ distributables.

  For their need for some of your applications or make install does not mean that you will make any C++ programming, but some applications need some of the runtime components and libraries installed with just distribution C++ files (it is not the whole development package).

  It is also possible to have multiple versions of the distributables C++ installed on your system - I installed 7, but you do not have to many.  Different programs that you install may require different sets of files to work.

  Take a look in Add/Remove programs and see what, if any, versions of Microsoft C++ Redistributables you have installed right now.

  The latest version is the version of Microsoft Visual C++ 2010, so if you don't have that, I would start by download and install from here:

  http://www.Microsoft.com/download/en/details.aspx?ID=8328 (this is the 32-bit version)

  If you see already that you have version 2010 installed in Add/Remove Programs, just uninstall it, reboot and reinstall it from the download, then view the side of things.

  Always restart after installing new software because that will eliminate the stupid question "did you restart your system" could happen later...

• I get an error message. Microsoft Visual C ++ Runtime Library Runtime Error.

  I get an error message. MicrosoftVisualC ++ Runtime Library Runtime Error programmed / Documents and Settings/name/Local Settings

  This application has requested the execution to terminate in an unusual way. For more information, contact the application support team.
  Is there a way I can fix it myself?
  I just restored the computer to factory settings, perform all updates of Windows, installed a new protection security, scanned the disc and did a disk check so hoped to be back to normal, but the last check disk ended at the blue screen and then nothing happened so I went and turn it on again. I found that I no longer had a taskbar at the bottom and then this error message.

  Hello

  · Why is - what have you done to restore the computer to factory setting?

  I suggest to download and install Microsoft Visual C++ 2010 Redistributable Package, you can even download link: Package redistributable Microsoft Visual C++ 2010 (x 86): http://www.microsoft.com/download/en/details.aspx?id=5555

  Follow method 1 from the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

• When I try to use my Microsoft Picture It application I get a "Microsoft Visual C++ Runtime Library" error__no error numbers. Microsoft Visual C++ Runtime Library program: Microsoft Picture It 2002\pip.exe__

  When I try to use my Microsoft Photo ITI application I get an error of "Microsoft Visual C++ Runtime Library"
  no error number. Microsoft Visual C++ Runtime Library program: Microsoft Picture It 2002\pip.exe

  I am using Microsoft Windows XP Home Edition Version 2002
  Service Pack 3

  The program stops.  It seems that I've adjusted started to have this problem after I had upgraded my browser from Internet 8.

  When I try to use my Microsoft Photo ITI application I get an error of "Microsoft Visual C++ Runtime Library"
  no error number. Microsoft Visual C++ Runtime Library program: Microsoft Picture It 2002\pip.exe

  I am using Microsoft Windows XP Home Edition Version 2002
  Service Pack 3

  The program stops.  It seems that I've adjusted started to have this problem after I had upgraded my browser from Internet 8.

  ========================================
  Might be interesting to try to download and install the following scroll:

  Picture It! Publishing 2002:
  Patch for 19299 (PI19299.exe)
  http://tinyurl.com/dfeq28
  or...
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=0fb68178-d6bd-41BD-9f00-f44ac7ca9e28
  John Inzer - MS - MVP - digital media experience