Error in a clean install of windows 8-0 xC0000001
I just recently finished building a new computer. Everything was very well and playing, but now when I try to install windows 8 (64-bit), I get this error code.
0 xC0000001
The windows icon appears, but the repair screen then appears.
He says that my computer needs to be repaired and miss me the winload file. Nothing is on my hard drive yet, so what's the problem? The drive is messed up?
ASUS z87-more
4770 Intel k cpu
16 GB corsair vengeance
1 TB seagate barracuda hard drive
PSU Corsair 750 m
NVIDIA geforce 670
The problem has been resolved.
Tags: Windows
Similar Questions
-
Yesterday I did a clean install of Windows 10 on my PC with a backup of the hard disk external. I downloaded iTunes, but get an error message that the drive is locked, the .itl files are locked, or I don't have administrative rights to these files. I deleted and reinstalled the PCI DSS several times correctly in the PCI slot hoping that would be a solution, but to no avail. I am the only user on this computer and do not have administrative rights. Any help you can offer will be appreciated. Thank you
This can help (from turingtest2):
-
I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error
Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error
About to panic. Could use some real help on this and not only refers to
http://support.Microsoft.com/kb/836941
The computer is a Dell Optiplex GX280
What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
Internet works fine on the device, I am writing to you from him.
Also, tried installing IE8 on one computer and run windows update, same error.
I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error
Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error
About to panic. Could use some real help on this and not only refers to
http://support.Microsoft.com/kb/836941The computer is a Dell Optiplex GX280
What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
Internet works fine on the device, I am writing to you from him.Also, tried installing IE8 on one computer and run windows update, same error.
Relax and breathe.
FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.
You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:
Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]
Install it.
Then restart at least a couple of times for a few minutes between each restart.
Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]
Install it.
Then restart at least a couple of times for a few minutes between each restart.
Download at least Internet Explorer 7 (if it is not Internet Explorer 8).
Install it.
Reset.
Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.
Back - let everyone know if it worked for you.
-
* Original title: hard drive
I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?
Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader. If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key . Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader. If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.
If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install. If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.
-
Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.
Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.
Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.
As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)
Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.
I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.
In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.
After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)
After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.
Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.
Details:
System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4
- Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
- Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported. Ran NVRAM reset before each attempt.
- At ran EtreCheck report which seemed OK.
- Verification of diagnosis ran who is childless.
A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.
In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.
Distill the results (the Boot Camp partition removed):
/ dev/disk0 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * GB 121,3 disk0
1: disk0s1 EFI EFI 209.7 MB
2: Apple_CoreStorage GB internal drive 121.0 disk0s2
3: disk0s3 Apple_Boot Boot OS X 134,2 MB
/ dev/disk2 (internal, physical):
#: NAME SIZE TYPE IDENTIFIER
0: GUID_partition_scheme * 3.0 to disk2
1: disk2s1 NO NAME 209.7 MB EFI
2: disk2s2 Apple_CoreStorage TB 3.0 drive internal
3: disk2s4 Apple_Boot Boot OS X 134,2 MB
/ dev/disk3 (internal, virtual):
#: NAME SIZE TYPE IDENTIFIER
0: Apple_HFS Macintosh HD + 3.1 TB disk3
Logical volume on disk0s2, disk2s2
7BE1F343-ACBE-4144-BF86-C838BE1E49D4
Fusion unencrypted drive
iMac - simon: ~ list of cs simon$ diskutil
CoreStorage groups of logical volumes (1 found)
|
+ Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2
=========================================================
Name: Internal drive
Status: online
Dimensions: 3121237860352 B (3.1 TB)
Free space: 0 (0 B) B
|
+-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93
| ----------------------------------------------------
| Index: 0
| Disc: disk0s2
| Status: online
| Dimensions: 120988852224 B (121.0 GB)
|
+-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0
| ----------------------------------------------------
| Index: 1
| Disc: disk2s2
| Status: online
| Dimensions: 3000249008128 B (3.0 to)
|
+--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9
----------------------------------------------------------
Encryption type: no
|
+--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4
---------------------------------------------------
Disc: disk3
Status: online
Size (Total): 3106705375232 B (3.1 TB)
Reversible: no
Name: Macintosh HD
Volume name: Macintosh HD
Content indicator: Apple_HFS
LVG Type: Fusion, sparse
Summary:
Q1: Should it take 4 + hours to install Windows 10 via BCA?
Q2: Al must ultimately be so slow when initially W10 desktop?
Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?
Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?
Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?
Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?
Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?
Details:
Day 5. Attempt at 6.
Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.
4 1/2 hours from start of Windows 10 initial signature window.
Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.
In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.
Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.
Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...
He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.
I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.
Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.
I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.
Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.
I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.
For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.
-
Hello
I recently bought a HP Envy X 360 laptop for work. The laptop comes with Windows preinstalled 10.
I'm doing a clean install of Windows 7 and during the installation, I get an error message "A required CD/DVD drive driver is missing. If you have a drive floppy disk, CD, DVD, or USB flash drive, please insert it now.
Novel if the Windows installation media is in the Cd/DVD drive, you can remove safely for this step"
I'm doing the installation via a USB key. The laptop has 3 USB ports and I believe these are all 3.0
Any help is greatly appreciated.
bryanhe wrote:
Download the Intel Chipset from Intel of https://downloadcenter.intel.com/downloads/eula/25731/Intel-Server-Chipset-Driver-for-Windows-?httpDown=https%3A%2F%2Fdownloadmirror.intel.com%2F25731%2Feng%2FIntel_chipset_10.1.2.10.zip software
Download the USB3 drivers from Intel - https://downloadcenter.intel.com/downloads/eula/22824/USB-3-0-Driver-Intel-USB-3-0-eXtensible-Host-Controller-Driver-for-Intel-8-9-100-Series-and-C220-C610-Chipset-Family?httpDown=https%3A%2F%2Fdownloadmirror.intel.com%2F22824%2Feng%2FIntel%28R%29_USB_3.0_eXtensible_Host_Controller_Driver_4.0.4.51.zip
Extract the drivers to packages
create directories
c:\Drivers
c:\drivers\glb
c:\Drivers\x86
c:\Drivers\x64
c:\temp\mount
c:\temp\DVD_Files
-the first is for the x 86 and x 64 so I put them in a directory c:\drivers\glb
-l' other contains x 86 vs x 64-put-the separate directories in separate directories.
c:\Drivers\x86
c:\Drivers\x64
(1) copy the ISO files from the DVD to install Windows 7 in a directory - c:\temp\dvd_files
(2) mount the boot.wim file
-dism/mount-WIM /wimfile:c:\temp\dvd_files\sources\boot.wim / index: 1 /mountdir:C:\temp\mount
DISM / image: C:\temp\mount / Add-Driver driver:c:\drivers\glb
DISM image:C:\temp\mount / Add-Driver driver:c:\drivers\x64 (or x 86 if the picture is for a 32-bit install
DISM /mountdir:c:\temp\mount unmount unmount
(3) mount the install.wim file
-you know what image to update because the install.wim file contains all the images (except Enterprise). If installing 64-bit Home Premium - that would be index 2
-dism/mount-WIM /wimfile:c:\temp\dvd_files\sources\install.wim / index: 2 /mountdir:C:\temp\mount
DISM / image: C:\temp\mount / Add-Driver driver:c:\drivers\glb
DISM image:C:\temp\mount / Add-Driver driver:c:\drivers\x64 (or x 86 if the picture is for a 32-bit install
DISM /mountdir:c:\temp\mount unmount unmount
Copy your files to USB and everything should be good.
Bryan
I forgot something. The boot.wim file has two images. So after step 2, you must do exactly the same thing again but on index 2 like this:
mount the boot.wim file
-dism/mount-WIM /wimfile:c:\temp\dvd_files\sources\boot.wim / index: 2 /mountdir:C:\temp\mount
DISM / image: C:\temp\mount / Add-Driver driver:c:\drivers\glb
DISM image:C:\temp\mount / Add-Driver driver:c:\drivers\x64 (or x 86 if the picture is for a 32-bit install
DISM /mountdir:c:\temp\mount unmount unmount
-
Clean install of Windows 8 on ENVY 4-1195
Hello
I buy a FANCY 4-1195 with Win8 preinstalled on it. I need to clean install Win8 Enterprise on it for power to reach the company network.
I boot from the CD, goto custom Setup to do a clean install of Windows on the new PC, but when I get to install Windows I get this error message:
We have found all the disks. For a storage driver, click on load a driver.
When I click on
I get the message:
No signed device not found driver. Make sure that the installation media contains the correct drivers...
When I try to browser only see us D (DVD) drive and drive X: (Boot) and no C: drive.
Thanks for your help
The system uses something of a RAID configuration, because it doesn't have an Intel RST and a Smart Connect pilot.
The problem is that I don't have access to a copy non - OEM Windows 8 to test the manual installation of the driver Intel RST or Smart Connect method.
What is a stock Enterprise of Windows 8 version or a custom image for the company? If it is a stock Enterprise installation, then the Windows Anytime Upgrade would be an option provided the OEM copy is always available and you know what is the product key.
However, you can try to extract the contents of the package driver to a USB flash drive and try to manually install one of the drivers (RST or Smart Connect) to see if it makes the configuration of disk HARD visible during the installation process.
Intel driver for fast ignition
Intel Smart Connect driver technology
1. install and open 7-zip.
2 in 7 - zip, access both downloaded drivers linked above in the post.
3. right click on each one and choose 7-zip > Archive open.
4. extract the contents of each driver on an external USB drive.
5. When you arrive at the selection of blank disc screen during installation of Windows 8, select the option to load drivers.
6. go to the file Intel RST pilot which was extracted, select drivers and appropriate architecture (x 86 for 32-bit, x 64 for 64-bit).
7. This can be a process of elimination. Try each driver (in RST and Smart Connect) until you find one that works.
8. when the appropriate driver has been installed, then the HARD drive should be visible.
Let me know what happens.
-
Can not access the updates after clean install of Windows 7 Pro
I have formatted my hard drive digital, preformed a clean install of Windows 7 Pro. Everything went well and OS seems to be properly authenticated.
The question is not able to 'find' updates. At startup, the message: NEW UPDATES AVAILABLE. When I check the updates, the process runs "forever" and never completes the process. The problem would be to my use of Office 2003? I have installed for messaging and Outlook calendar. Here's the MGADiag.exe diagnostic tests.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 96DXD - 3PDHD-FC6KT
Windows Product Key hash: FiWgfb/HBGU plus 7qzKd5NATMcX2iI
Windows product ID: 00371-OEM-9314963-39295
Windows product ID type: 8
Windows license type: COA SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {0AC450E6-A3AD-405E-B244-B6074CECBF8A} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 100 authentic
Microsoft Office Standard Edition 2003 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]
Other data-->
Office details:
{0AC450E6-A3AD-405E-B244-B6074CECBF8A} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-FC6KT 00371-OEM-9314963-39295 8 S-1-5-21-323565687-595391911-2700631585 Dell Inc.. Latitude D630 Dell Inc.. A16 20090714000000.000000 + 000DE083907018400FA 0409 0409 Mountain Standard Time(GMT-07:00) 0 3 DELL M08 100 100 Microsoft Office Standard Edition 2003 11 qQgWhuDYJMzZ2Ra9gyv5SUkXuJA = 70141-051-9705975-56000 1 960A2760EC8D866 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514
Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
Activation ID: da22eadd-46dc-4056-a287-f5041c852470
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00186-149-639295-02-1033-7601.0000-0102016
Installation ID: 001986425316033083061411071895367413981866374930874720
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: FC6KT
License status: licensed
Remaining Windows rearm count: 3
Trust time: 25/01/2016 10:58:11
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:
--> HWID data
Current HWID hash: NgAAAAEABAABAAIAAAABAAAAAwABAAEA6GGi4iOfPAyIevyQRoOYoLzXkIWCAxbA4Klv5iqF
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
REFERENCE DELL M08 APIC
FACP DELL M08
HPET DELL M08
MCFG DELL M08
ASF! REFERENCE DELL M08
TCPA
M08 DELL SLIC
SSDT PmRef CpuPm
Thank you in advance for any help you can provide.
Firecracker.DWR
You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
I suggest before you stop and install the updates, disconnect from the Internet, first.
I also recommend that download you and install Service Pack 3 for Office 2003, then look for updates in the Help menu.
-
Clean install of Windows 7 on Pavilion M6 1000so
Hello.
I have a 1000so Pavilion M6 with a chipset AMD A70M / controller.
Can someone tell me where I can find a driver windows 7 (x 64) to load when you try to do a clean install of Windows 7?
(I do not have the windows installation disc 7)
Thank you.
/ franc
Hello.
Thanks for your reply Paul.
The solution for me was to burn the image on a CD windows system file, and then it worked immediately!
When I tried to install from a USB Pendrive drived it has failed every time. I tried to install different versions of different USB drives with the same error. (the USB key works on other machines)
Install 8 Windows from a USB drive works fine. I also tried to load the atiSATA drivers (DCIS) starting from the .exe chipset.
So, it seems that the problem is that Windows 7 does have the atisata driver, but does NOT have the USB drivers...
ABAN... once more a CD does the job
Thank you.
-
I'm doing a clean install of Windows 7 on a 32-bit computer
I have 8 window, that I don't like. I'm going back to windows 7. I have a disc. When I try to download, I get a message error-cannot update the installation files... How to do a clean install of Windows 7? my computer is 31 bits
Boot from the Windows 7 DVD
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)Select the disk partition where you want to install Windows 7 click Next.
You will receive the following warning:
The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
(At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK
The installation program will now begin installation. During installation, your computer will be restarted several times.
Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.
You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.
-
Setup for Win 7 Prof error can not activate.
I did a clean install of Windows 7 teacher instead of an upgrade because of idiocy. Now it does not accept my product key. Is it possible to set which does not imply a costly phonecall?Partial product key: PW487License status: NotificationReason for the notification: 0xC004F009 (grace period expired).Remaining Windows rearm count: 4Trust time: 19:51:25 08/02/2012Try the Activate by phone:
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Cannot re - save Photoshop CS4 on a new clean install of Windows 10
I disabled and uninstalled my copy of Photoshop CS4 in Windows 7 and tried to reinstall on a new clean install of Windows 10 using the same registration number, but the number is constantly rejected as invalid. I checked and double-checked it three times without success. How can I re - register my software?
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html
-http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html
- and http://forums.adobe.com/thread/1038761
In addition, that the software is old enough so that it does not work with Windows 10... but
An idea that MAY work to install or run some programs in Windows old 10
-
HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1
Hello
After a clean install of windows 8.1 the audio beats does not open.
It appears in the control, but when I click on it nothing happens.
I have sound, and everything seems to work ok, but I'm curious to know what happened.
When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.
I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.
Any help would be appreciated
Hello
Download and reinstall the Realtek HD Audio software at the following link.
http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe
When the installation is complete, restart the laptop.
Kind regards
DP - K
-
Clean install of Windows 7 on Satellite L655
I have a Satellite L655 and replace the HDD with a SSD (2 sheets) system (more small capacity, 1 partition). I also want to do a clean install of Windows 7.
I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.
> I'll be able to use the recovery disc for this? If so, will I have to reactivate? Thank you.
What exactly do you want: clean windows installation or by using the disk Toshiba recover?
I mean own installation only the Windows operating system using the Microsoft Win 7 disc.
This installation requires a valid serial key.But using the Toshiba recovery disc requires no any key since the BONES of the window is already enabled on this drive.
-
Portege Z830 - on a clean install of windows access keys
What do I need to work the KEYS FN on a clean install of Windows?
I have a Toshiba Portege Z830, width window 8.1 Professional (he cams 7 width windows).
The first time I installed windows 8, I'm doing the hotkey working width drivers Toshiba a upgrade of windows 8.
But now, after a new installation, it does not work.Some keys work, such as FN + 3 or 4 for the sound. But I think that it is a feature of windows. I need the combination of brightness FN + F6 or F7, and they do not work.
What should I install? I read that I have to install the driver of Toshiba value added package system, but it does not work. There is also a utillity called Toshiba function key.
What should I install?
Thanks ;)
*@Infocomit*
Don t be angry with me, but you're wrong. Sometimes it s advisable to check some things twice.
Driver Toshiba UE page provides details and description on the drivers and utilities.
If you need to get the details about the unique software, click on the red arrow in the Details column.By the way: it's community of users.
Maybe you are looking for
-
I had to reboot firefox and lost all the buttons on my part. How can I get them back or where can I find them and bring them to pin on the page?
-
Cannot locate images in the Finder
Validated responses tell to go to finder-> preferences, but my menu shows no preference. How do?
-
Carbon X 1 base system device error
I got this error for base system device in my device manager. I installed X 1 Ricoh multicard reader, but even when he can't solve. My machine is X 1-3444-BDU, Win 7 pro 64-bit. Could someone help me? Thank you!
-
If I downloaded overview of pre-beta of windows 8, how, go back to my windows xp?
Pre-beta Windows 8 If I downloaded overview of pre-beta of windows 8, how, go back to my windows xp?
-
I get error 0x800742c - how to fix?
I have several warning, but Windows Defender solutions do not download.