Error in invoking target 'ioracle"of the makefile

Similar Questions

• Error in invoking target 'install' in the makefile

  Hi all

  When I install EM12C then I got this error is "Error" by invoking the 'install' in the makefile target

  Please help me to solve this error.

  INFO: / usr/bin/ld: cannot find-lclntsh -.

  collect2: ld returned 1 exit status

  INFO: make [1]: leaving directory ' / u01/app/oracle/product/middleware/who/sqlplus/lib '.

  INFO: make [1]: * [/ u01/app/oracle/product/middleware/who/sqlplus/bin/sqlplus32] error 1

  make: * [newsqlplus32] error 2

  INFO: End of the generated process exit.

  INFO: ----------------------------------

  INFO: Exception thrown from action: do

  Exception name: MakefileException

  Exception string: error in invoking target 'install' of makefile ' / u01/app/oracle/product/middleware/oms/sqlplus/lib/ins_sqlplus.mk'. See ' / u01/app/oraInventory/logs/installActions2013-07-26_08-43-01-AM.log ' for details.

  The exception severity: 1

  INFO: POPUP of WARNING: error in invoking target 'install' of makefile ' / u01/app/oracle/product/middleware/oms/sqlplus/lib/ins_sqlplus.mk'. See ' / u01/app/oraInventory/logs/installActions2013-07-26_08-43-01-AM.log ' for details.

  Click 'Retry' to try again.

  Click "Ignore" to ignore this error and continue.

  Click 'Cancel' to stop this installation.

  Best regards

  Kong Kosal

  Check for 2 things-

  (a) is the directory where you extracted your software (disc 1) and under Disk1, you should see the following files. WT.zip is this?

  a@adcxxxxxxx Disk1] $ ls

  install plugins response stage WT.zip libskgxn

  JDK SGD runInstaller wls

  (b) as mentioned Courtney, you ignore a failure of pre - req and I suspect that you have not the glibc package on your host.

  Review required packages-http://docs.oracle.com/cd/E24628_01/install.121/e22624/preinstall_req_packages.htm#CHDEHHCA

  Examine the log files

  installActions/logs /.log

  / cfgtoollogs/Yes/installActions.log

• Exception string: error in invoking target 'client_sharedlib' of the makefile on Solaris 11

  Hi all

  I am installing a 12 c on Solaris 11 SPARC 64 bit software and Installer throws the below error.

  tail /a01/oracle/oraInventory/logs/installActions2015-10-05_11-10-03AM.log shows error.

  INFO: Starting the process generated output:

  INFO: ----------------------------------

  INFO:

  INFO: /a01/oracle/finsft/12.1.0/bin/genclntsh

  INFO: genclntsh: failed to bind libclntsh.so.12.1

  INFO: * error code 1

  NEWS: make: Fatal error: command for target 'client_sharedlib' failed

  INFO: End of the generated process exit.

  INFO: ----------------------------------

  INFO: Exception thrown from action: do

  Exception name: MakefileException

  Exception string: error in the call to target 'client_sharedlib' of makefile ' / a01/oracle/finsft/12.1.0/rdbms/lib/ins_rdbms.mk'. See ' / a01/oracle/oraInventory/logs/installActions2015-10-05_11-10-03AM.log' for details.

  The exception severity: 1

  tail-f /a01/oracle/finsft/12.1.0/install/make.log

  TARGET_BINARY_INTERFACE =

  export TARGET_BINARY_INTERFACE

  nnfgt.c - CC c

  -f /a01/oracle/finsft/12.1.0/lib/nnfgt.o rm

  MV - nnfgt.o /a01/oracle/finsft/12.1.0/lib/

  / usr/CCS/bin/AR rv /a01/oracle/finsft/12.1.0/lib/libn12.a /a01/oracle/finsft/12.1.0/lib/nnfgt.o; FI)

  otherwise f ins_rdbms.mk client_sharedlib ORACLE_HOME=/a01/oracle/finsft/12.1.0//a01/oracle/finsft/12.1.0/bin/genclntsh

  genclntsh: failed to bind libclntsh.so.12.1

  Error code 1

  make: Fatal error: command for target 'client_sharedlib' failed

  Thank you

  Chubby

  I managed to solve this problem by double-checking the md5 values, it did not fit for p21419221_121020_SOLARIS64_1of10.zip, just downloaded the zip files again and matched md5 insured. installation went fine through this time!

  Thank you

  Chubby

• Installing Oracle 11.2.0.4 on OEL 7 encounter error in invoking target 'agent NMHSS' Makefile

  IAM trying to install oracle 11.2.0.4 on OEL 7, meet the below error:

  Error in invoking target 'SMN agent' of makefile ' / home/vmraghav/oracle/product/11.2.0.4/db_1/sysman/lib/ins_emagent.mk'. See ' / home/vmraghav/oraInventory/logs/installActions2015-01-20_09-34-12PM.log' for more details

  All the required RPMs are installed before starting the installation.  Follow-up (ORACLE-BASE - Oracle Database 11g Release 2 (11.2) Installation on Linux Oracle 7 (OL7))

  I would like to know how to get rid of this error iam see.

  Concerning

  Vivek

  Obtained, he now works.

  1. change the ins_emagent.mk

  2. change the below:

  Emdctl $(SYSMANBIN):

  $(MK_EMAGENT_NMECTL)

  TO

  Emdctl $(SYSMANBIN):

  $(MK_EMAGENT_NMECTL) - lnnz11

  3 restart the installation again.

  Once installation is complete verified in the oracle_home/bin directory NMHSS/nm0/nmb files are now available with root privileges.

• MakefileException: Error in invoking target 'install' of makefile ' / u01/app/oracle/dbhome_1/ctx/lib/ins_ctx.mk'

  I try to install Oracle database 11 g 2 on Oracle Linux 7.1 on a 64-bit server. During the installation process, this error is coming:

  Exception name: MakefileException

  Exception string: error in invoking target 'install' of makefile ' / u01/app/oracle/dbhome_1/ctx/lib/ins_ctx.mk'. See

  ' / u01/app/oraInventory/logs/installActions2015-07-01_06-11-44PM.log' for details.

  The exception severity: 1

  The research revealed only one potential problem with missing libraries. During installation, all the libraries who have failed the audit have been installed by using the 64-bit versions of Oracle Linux 7.1 DVD. So, there is no library missing in this case.

  Is it possible that the 32-bit versions must be installed? I just did the 64-bit ones.

  What does ins_ctx.mk do? Can we ignore this error without risk?

  Linux 7.x requires minimum 11.2.0.4 - What exact version 11 GR 2 have you installed?

  http://docs.Oracle.com/CD/E11882_01/Relnotes.112/e23558/TOC.htm#CHDFHIEA

• error in invoking target install of makefile ins_sqlplus.mk

  Hi all
  
  I want to install oracle 9.2 on red hat 4, but during the installation I get the error below
  

  [root@localhost RPMS]# uname -r
  2.6.9-55.ELsmp
  
  
  [root@localhost RPMS]# rpm -q binutils compat-db compat-libstdc++-33 glibc glibc-devel glibc-headers gcc gcc-c++ libstdc++ cpp make libaio ksh elfutils-libelf sysstat libaio libaio-devel setarch --qf '%{name}.%{arch}\n'|sort
  binutils.x86_64
  compat-db.i386
  compat-db.x86_64
  compat-libstdc++-33.i386
  cpp.x86_64
  elfutils-libelf.i386
  elfutils-libelf.x86_64
  gcc-c++.x86_64
  gcc.x86_64
  glibc-devel.i386
  glibc-devel.x86_64
  glibc-headers.x86_64
  glibc.i686
  glibc.x86_64
  libaio-devel.x86_64
  libaio.i386
  libaio.i386
  libstdc++.i386
  libstdc++.x86_64
  make.x86_64
  package ksh is not installed
  package sysstat is not installed
  setarch.x86_64
  [root@localhost RPMS]#
  
  [root@localhost RPMS]# uname -a
  Linux localhost.localdomain 2.6.9-55.ELsmp #1 SMP Fri Apr 20 16:36:54 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
  [root@localhost RPMS]#

  error in invoking target install of makefile ins_sqlplus.mk

  Can someone suggest me anything for the same thing except do not use oracle 9i, as this is a version desupported.
  
  Published by: user13389425 on August 27, 2010 12:18 AM

  its 64-bit only

• SGD 12 c Upgrade blocked this error in invoking target ' client_shared

  Hi all
  
  We are upgrading WHO 11.1 to 12 c
  blocked this error after invoking runInstaller
  Suite 1 system upgrade. (graphics mode).
  
  
  INFO: Starting the process generated output:
  INFO: ----------------------------------
  INFO:
  
  INFO: / opt/app/wls/oms12c/who/bin/genclntsh
  
  NEWS: make: execvp: / opt/app/wls/oms12c/who/bin/genclntsh: permission denied
  
  NEWS: make: * [client_sharedlib] error 127
  
  INFO: End of the generated process exit.
  INFO: ----------------------------------
  INFO: Exception thrown from action: do
  Exception name: MakefileException
  Exception string: error in the call to target 'client_sharedlib' of makefile ' / opt/app/wls/oms12c/oms/rdbms/lib/ins_rdbms.mk'. See ' / opt/app/oraInventory/logs/installActions2012-08-02_06-38-02-PM.log ' for details.
  The exception severity: 1
  INFO: POPUP of WARNING: error in invoking target 'client_sharedlib' of makefile ' / opt/app/wls/oms12c/oms/rdbms/lib/ins_rdbms.mk'. See ' / opt/app/oraInventory/logs/installActions2012-08-02_06-38-02-PM.log ' for details.
  
  Click 'Retry' to try again.
  Click "Ignore" to ignore this error and continue.
  Click 'Cancel' to stop this installation.
  
  Please notify
  
  Published by: TechAdmin on 2 August 2012 16:09
  
  Published by: TechAdmin on 2 August 2012 16:11

  The question that you are running is known to us and we have depreciation in our next release ( bug 14050320 I do not know if you can see the details of the bug). The issue here is you have exported/imported from the DB and then created the DB for this upgrade. While this import/export, the materialized view "SYSMAN." "MGMT_ECM_MD_ALL_TBL_COLUMNS in the DB gets converted into a table. The upgrade code EM tries to remove the "SYSMAN." "MGMT_ECM_MD_ALL_TBL_COLUMNS view, but it fails (as his table now).

  To resolve this issue, you must run sql in your db and service/retry the upgrade by using the repmanager command. Since a public forum that I won't share the sql code in this forum. You can e-mail me or provide me with a SR so that I can give you more detailed instructions.

• Error during installation of Oracle - error in invoking target 'mkldflags ntcontab.o nnfgt.o '.

  Hi all

  I want to install Oracle 11.2.0.3 on Solaris 11 and 70% end I get this error "error in invoking target 'mkldflags ntcontab.o nnfgt.o' Makefile '.

  Tried Google but no resolution is mentioned for Solaris.

  Thank you

  NEWS: sh [2]: / usr/ccs/bin/as: not found [no such file or directory

  Looks like it's your root cause.

  Read this:

  Installation fails with: / usr/ccs/bin/as: not found [no such file or directory] on Solaris 11 or Solaris 10 (Doc ID 1551669.1)

• Error in invoking target 'irman ioracle' of makefile ' / opt/oragrid/rdbms/lib/ins_rdbms.mk'

  Hi all

  I try to install Oracle12c IM on two virtual knots (in VMware Fusion) and get the following error message (both nodes are configured exactly the same):

  INFO: Starting the process generated output:

  INFO: ----------------------------------

  INFO:

  INFO:

  INFO:-bind the Recovery Manager (rman)

  INFO: rm f/opt/oragrid/rdbms/lib/rman

  INFO: / opt/oragrid/bin/orald o/opt/oragrid/rdbms/lib/rman-m64 - z noexecstack - Wl, - disable-new-dtags - L/opt/oragrid/rdbms/lib/-L/opt/oragrid/lib/-L/opt/oragrid/lib/talons//opt/oragrid/lib/s0main.o /opt/oragrid/rdbms/lib/sskrmed.o /opt/oragrid/rdbms/lib/skrmpt.o-ldbtools12-lclient12-lsql12-lpls12 - lrt-lplp12-lsnls12-lunls12-lnls12-lslax12-lpls12 - lrt-lplp12 /opt/oragrid/lib/libplc12.a - lclntsh - lclntshcore "/ opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnro12 cat ' cat '.

  INFO: /opt/oragrid/lib/ldflags'-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnnz12-lzt12-lztkg12-lztkg12-lclient12-lnnetd12-lvsn12-lcommon12-lgeneric12 - lmm-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12 "/ opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnro12 cat ' cat/opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lclient12-lnnetd12-lvsn12-lcommon12-lgeneric12 - lsn.

  INFOS : ls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12-lclient12-lnnetd12-lvsn12-lcommon12-lgeneric12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12 « cat /opt/oragrid/lib/sysliblist » -Wl,-rpath, / opt/oragrid/lib -lm « cat /opt/oragrid/lib/sysliblist » -ldl -lm -L/opt/oragrid/lib

  INFO: test! f - / opt/oragrid/bin/rman | \

  MV f/opt/oragrid/bin/rman/opt/oragrid/bin/rmanO

  INFO: mv/opt/oragrid/rdbms/lib/rman/opt/oragrid/bin/rman

  INFO: chmod 751/opt/oragrid/bin/rman

  INFO: chmod 755/opt/oragrid/bin

  INFO:

  INFO:-link Oracle

  INFO: rm f/opt/oragrid/rdbms/lib/oracle

  INFO: / opt/oragrid/bin/orald o/opt/oragrid/rdbms/lib/oracle-m64 - z noexecstack - Wl, - disable-new-dtags - L/opt/oragrid/rdbms/lib/-L/opt/oragrid/lib/-L/opt/oragrid/lib/heels / - Wl, - E /opt/oragrid/rdbms/lib/opimai.o /opt/oragrid/rdbms/lib/ssoraed.o /opt/oragrid/rdbms/lib/ttcsoi.o - Wl, - whole-archive - lperfsrv12 - Wl, - non-ensemble - archive /opt/oragrid/lib/nautab.o /opt/oragrid/lib/naeet.o /opt/oragrid/lib/naect.o /opt/oragrid/lib/naedhs.o /opt/oragrid/rdbms/lib/config.o - lserver12-lodm12 lcell12-lnnet12 - lskgx

  INFO: p12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12-lclient12-lvsn12-lcommon12-lgeneric12 - lknlopt ' if/usr/bin/ar tv /opt/oragrid/rdbms/lib/libknlopt.a | grep xsyeolap.o > / dev/null 2 > & 1; then echo '-loraolap12 '; '- lskjcx12-lslax12-lpls12 - lrt-lplp12-lserver12-lclient12-lvsn12-lcommon12-lgeneric12' fi if [f - opt/oragrid/lib/libavserver12.a]; then echo '-lavserver12 '; else echo '-lavstub12 '; fi' 'if [-f ".

  [INFO: opt/oragrid/lib/libavclient12.a]; then echo '-lavclient12 '; fi'-lknlopt-lslax12-lpls12 - lrt-lplp12-ljavavm12-lserver12 - lwwg "/ opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnro12 cat ' cat/opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnnzst12-lzt12-lztkg12 - lmm-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12-lztkg12 ' cat/opt/oragrid/lib/ldflags" - lncrypt12 "

  :-Lnsgr12-lnzjs12-ln12-lnl12-lnro12 INFO "/ opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnnzst12-lzt12-lztkg12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12 cat ' if/usr/bin/ar tv /opt/oragrid/rdbms/lib/libknlopt.a | grep 'kxmnsd.o' > / dev/null 2 > & 1; then echo ""; else echo '-lordsdo12 '; fi'L-/ opt/oragrid/ctx/lib / - lctxc12-lctx12-lzx12-lgx12-lctx12-lzx12-lgx12-lordimt12-lclsra12 - ldbc

  INFOS : fg12-lhasgen12-lskgxn2-lnnzst12-lzt12-lxml12-locr12-locrb12-locrutl12-lhasgen12-lskgxn2-lnnzst12-lzt12-lxml12-lgeneric12 - loraz - llzopro-lorabz2-lipp_z-lipp_bz2 - lippdcemerged - lippsemerged - lippdcmerged - lippsmerged - lippcore - lippcpemerged - lippcpmerged-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12-lsnls12-lunls12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12

  :-Lunls12-lsnls12-lnls12-lcore12-lnls12-lasmclnt12-lcommon12-lcore12 INFO - laio - lons ' cat/opt/oragrid/lib/sysliblist' - Wl,-rpath, / opt/oragrid/lib - lm ' cat/opt/oragrid/lib/sysliblist' - ldl - lm-l/opt/oragrid/lib

  INFO: /.

  INFO: usr

  INFO: /.

  INFO: bin

  INFO: /.

  INFO: ld

  INFO:.

  INFO:

  INFO: cannot

  INFO:

  INFO: find

  INFO:

  INFO: -.

  INFO: ljavavm12

  INFO:

  INFO: collect2:

  INFO: ld returned 1 exit status

  INFO:

  NEWS: make: * [/ opt/oragrid/rdbms/lib/oracle] error 1

  INFO: End of the generated process exit.

  INFO: ----------------------------------

  INFO: Exception thrown from action: do

  Exception name: MakefileException

  Exception string: error in the call to target 'irman ioracle' of makefile ' / opt/oragrid/rdbms/lib/ins_rdbms.mk'. See ' / opt/oraInventory/logs/installActions2013-11-25_04-25-06PM.log' for details.

  The exception severity: 1

  Here is my VM card:

  **************************************************************Installed RPM's*****************************************************************

  cat/etc/redhat-release

  Red Hat Enterprise Linux Server 6.4 release (Santiago)

  RPM - qa CCG

  4.4.7 - GCC - 3.el6.x86_64

  RPM - qa do

  Make - 3.81 - 20.el6.x86_64

  RPM - qa | grep oracle

  oracleasmlib - 2.0.4 - 1.el6.x86_64

  Oracle-logos - 60.0.14 - 1.0.1.el6.noarch

  Oracle-RDBMS-Server-12cR1-preinstall-1.0-8.EL6.x86_64

  kmod-oracleasm - 2.0.6.rh1 - 2.el6.x86_64

  oraclelinux-release-notes-6Server - 9.x86_64

  oraclelinux-release-6Server - 4.0.4.x86_64

  oracleasm-support - 2.1.8 - 1.el6.x86_64

  ***************************************************************JAVA***************************************************************************

  Java version "1.7.0_45".

  Java (TM) SE Runtime Environment (build 1.7.0_45 - b18)

  Java for 64-bit Server VM (build 24.45 - b08, mixed mode)

  *************************************************************SYSCTL**************************************************************************

  # Sysctl for Red Hat Linux kernel configuration file

  #

  # For the binary values, 0 is off, 1 is enabled.  See sysctl (8) and

  # sysctl.conf (5) for more details.

  # IP packets transfer controls

  NET. IPv4.ip_forward = 0

  # Control source route verification

  NET. IPv4.conf.default.rp_filter = 1

  # Do not accept source routing

  NET. IPv4.conf.default.accept_source_route = 0

  # The request feature of the kernel debugging system control

  kernel. SysRq = 0

  # Check if core dumps will add the PID for the base file name.

  # Useful to debug multithreaded applications.

  kernel.core_uses_pid = 1

  kernel.core_pattern=/var/adm/crash/cores/%e.SIG%s

  # Control the use of the TCP syncookies

  NET. IPv4.tcp_syncookies = 1

  # Disable netfilter on bridges.

  NET. Bridge.Bridge - nf-appeal-ip6tables = 0

  NET. Bridge.Bridge - nf-appeal-iptables = 0

  NET. Bridge.Bridge - nf-appeal-arptables = 0

  # Control default maxmimum of a message queue size

  kernel.msgmnb = 65536

  # Control the maximum size of a message, in bytes

  kernel.msgmax = 65536

  # Control the maximum shared segment size, in bytes

  # Control the maximum number of shared memory pages segments

  kernel.shmall = 4294967296

  # oracle - RDBMS - server - 12cR1 - preinstallation fs.file - max is 6815744

  FS.file - max = 6815744

  # oracle - RDBMS - server - 12cR1 - preinstall setting kernel.sem is 250 32000 100 128'

  kernel.SEM = 250 32000 100 128

  # oracle - RDBMS - server - 12cR1 - kernel.shmmni preinstallation is 4096

  kernel.shmmni = 4096

  # oracle - RDBMS - server - 12cR1 - kernel.shmall preinstallation is 1073741824 on x86_64

  # oracle - RDBMS - server - 12cR1 - kernel.shmmax preinstallation is 4398046511104 on x86_64

  kernel.shmmax = 4398046511104

  # oracle - RDBMS - server - 12cR1 - net.core.rmem_default preinstallation is 262144

  NET. Core.rmem_default = 262144

  # oracle - RDBMS - server - 12cR1 - net.core.rmem_max preinstallation is 4194304

  NET. Core.rmem_max = 4194304

  # oracle - RDBMS - server - 12cR1 - net.core.wmem_default preinstallation is 262144

  NET. Core.wmem_default = 262144

  # oracle - RDBMS - server - 12cR1 - net.core.wmem_max preinstallation is 1048576

  NET. Core.wmem_max = 1048576

  # oracle - RDBMS - server - 12cR1 - fs.aio preinstallation - max - nr is 1048576

  ISA AIO-max-nr = 1048576

  # oracle - RDBMS - server - 12cR1 - net.ipv4.ip_local_port_range preinstallation is 9000 65500

  NET. IPv4.ip_local_port_range = 9000 65500

  # Entries below have been added and to face a question r_filtering interconnections oracle wants private put in the open air

  NET. IPv4.conf.ETH4.rp_filter = 2

  NET. IPv4.conf.eth6.rp_filter = 2

  NET. IPv4.conf.eth1.rp_filter = 1

  *************************************************************Filesystem************************************************************************

  Size of filesystem used Avail use % mounted on

  / dev/map/vg_oracle12c-lv_root

  8.9 G 3.5 G 5.0 G 42%.

  tmpfs G 2.2 2.2 0 G 0% / dev/shm

  / dev/sda1 485M 101 M 359M 22% / Boot

  / dev/map/vg_oracle12c-lv_home

  2.0 G 70 M 1.9 G 4% / Home

  / dev/map/vg_oracle12c-lv_tmp

  4.5 G 541 M 3.7 G 13% / tmp

  / dev/map/vg_oracle12c-lv_var

  5,0 G 956 M 3.8 G 20% / var

  / dev/map/oracle_vg-oragrid

  20G 5.0 G 14G 27% / opt/oragrid

  . Host: / 466G 137 G 330 G 30% / mnt/hgfs

  *******************************************************************CPU INFO*******************************************************************************

  cat/proc/cpuinfo

  Processor: 0

  vendor_id: GenuineIntel

  CPU family: 6

  model: 70

  model name: Intel(r) Core i7-4850HQ CPU @ 2.30 GHz

  step by step: 1

  CPU MHz: 2294.967

  cache size: 6144 KB

  FPU: Yes

  fpu_exception: Yes

  CPUID level: 13

  WP: Yes

  flags: fpu vme pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts ngif xtopology tsc_reliable nonstop_tsc aperfmperf DNI pclmulqdq ssse3 cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave f16c rdrand avx fma hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase RID

  BogoMips: 4589.93

  clflush size: 64

  cache_alignment: 64

  address sizes: 40 bits physical, 48 bits virtual

  power management:

  Processor: 1

  vendor_id: GenuineIntel

  CPU family: 6

  model: 70

  model name: Intel(r) Core i7-4850HQ CPU @ 2.30 GHz

  step by step: 1

  CPU MHz: 2294.967

  cache size: 6144 KB

  FPU: Yes

  fpu_exception: Yes

  CPUID level: 13

  WP: Yes

  flags: fpu vme pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts ngif xtopology tsc_reliable nonstop_tsc aperfmperf DNI pclmulqdq ssse3 cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave f16c rdrand avx fma hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase RID

  BogoMips: 4589.93

  clflush size: 64

  cache_alignment: 64

  address sizes: 40 bits physical, 48 bits virtual

  power management:

  Processor: 2

  vendor_id: GenuineIntel

  CPU family: 6

  model: 70

  model name: Intel(r) Core i7-4850HQ CPU @ 2.30 GHz

  step by step: 1

  CPU MHz: 2294.967

  cache size: 6144 KB

  FPU: Yes

  fpu_exception: Yes

  CPUID level: 13

  WP: Yes

  flags: fpu vme pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts ngif xtopology tsc_reliable nonstop_tsc aperfmperf DNI pclmulqdq ssse3 cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave f16c rdrand avx fma hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase RID

  BogoMips: 4589.93

  clflush size: 64

  cache_alignment: 64

  address sizes: 40 bits physical, 48 bits virtual

  power management:

  Processor: 3

  vendor_id: GenuineIntel

  CPU family: 6

  model: 70

  model name: Intel(r) Core i7-4850HQ CPU @ 2.30 GHz

  step by step: 1

  CPU MHz: 2294.967

  cache size: 6144 KB

  FPU: Yes

  fpu_exception: Yes

  CPUID level: 13

  WP: Yes

  flags: fpu vme pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts ngif xtopology tsc_reliable nonstop_tsc aperfmperf DNI pclmulqdq ssse3 cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave f16c rdrand avx fma hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase RID

  BogoMips: 4589.93

  clflush size: 64

  cache_alignment: 64

  address sizes: 40 bits physical, 48 bits virtual

  power management:

  *******************************************************************************Memory************************************************************************

  free m

  total used free shared buffers cached

  MEM: 4331 3972 359 0 30 3412

  -/ + buffers/cache: 530 3801

  Swap: 14323 0 14323

  ****************************************************************************Network***************************************************************************

  Note eth0 is NAT and used for internet connectivity, eth1 is the public network (static and accessible to the machine of hypervising fusion running) eth4 and eth6 are private and eth3 is connected to a storage openfiler device (this is also a virtual machine which serves ISCSI targets).

  
  

  eth0 Link encap HWaddr 00:50:56:22:C6:91

  INET addr:192.168.90.140 Bcast:192.168.90.255 mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:fe22:c691 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 227 errors: 0:0 overruns: 0 frame: 0

  Dropped packets TX: 225 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 24414 (23.8 KiB) TX bytes: 18545 (18.1 KiB)

  eth1 Link encap HWaddr 00:50:56:3 A: AE:95

  INET addr:192.168.3.2 Bcast:192.168.3.255 mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:fe3a:ae95 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 482561 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 450616 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 483728272 (461.3 MiB) TX bytes: 501489666 (478.2 MiB)

  eth3 Link encap HWaddr 00:50:56:24:40:AB

  INET addr:192.168.5.2 Bcast:192.168.5.255 mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:fe24:40ab / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 4944 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 3817 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 6186232 (5.8 MiB) TX bytes: 346478 (338,3 KiB)

  ETH4 Link encap HWaddr 00:50:56:3F:77:AA

  INET addr:192.168.1.1 Bcast:192.168.1.255 mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:fe3f:77aa / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 1222 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 978 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 205198 (200.3 KiB) TX bytes: 168464 (164.5 KiB)

  eth6 Link encap HWaddr 00:50:56:22:72:E3

  INET addr:192.168.1.3 Bcast:192.168.1.255 mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:fe22:72e3 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 354 errors: 0:0 overruns: 0 frame: 0

  Dropped packets TX: 116 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 54390 (53.1 KiB) TX bytes: 17992 (17.5 KiB)

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  ADR inet6:: 1/128 Scope: host

  RACE of LOOPING 16436 Metric: 1

  Dropped packets: 194338 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 194338 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 920534042 (877.8 MiB) TX bytes: 920534042 (877.8 MiB)

  *****************************************************************************ORACLE ASM AND MULTIPATH INFO********************************************

  /etc/init.d/oracleasm listdisks

  VOTE1

  OPPORTUNITIES.2

  VOTE3

  vote3 (14f504e46494c45523434517a65422d4b6364682d57544f65) dm-8 OPNFILER, VIRTUAL DISK

  size = 3. 0 g features = '0' hwhandler = '0' wp = rw

  ' - + - political = "round-robin 0" prio is 1 table = active ".

  ' - 3:0:0:2 sdh ready active 8:112 running

  vote2 (14f504e46494c45526e6c6a48324a2d6a4347462d7a465074) dm-6 OPNFILER, VIRTUAL DISK

  size = 3. 0 g features = '0' hwhandler = '0' wp = rw

  ' - + - political = "round-robin 0" prio is 1 table = active ".

  ' - 3:0:0:1 sdg ready active 8:96 running

  Vote1 (14f504e46494c45525763646753422d594262512d414a6275) dm-7 OPNFILER, VIRTUAL DISK

  size = 3. 0 g features = '0' hwhandler = '0' wp = rw

  ' - + - political = "round-robin 0" prio is 1 table = active ".

  ' - 3:0:0:0 homeless ready active 8:80 running

  *********************************************************************************************************************************************************************

  If more information is required please request and I will pay, as you can see that there are more than enough memory space and disk for the installation. The only exception being that I use a different "oraInventory', 'gridhome' and 'oraBase. I looked closely at the exit and the problem seems to be a file called "ljavavm12", I highlighted the line in bold above in the log output. Any help with this would be greatly appreciated.

  Kind regards

  Alex

  Solved my problem,

  to any other person with the same problem, here is how it was resolved:

  ljavavm12 belongs to libjavavm12.a, for some reason this file has not been copied in the $GRID_HOME, after having done so through fine.

  "cp /opt/oragrid/javavm/jdk/jdk7/lib/libjavavm12.a/opt/oragrid/lib / '.

  Alex,

• Error in invoking target 'client_sharedlib' of makefile

  Hello from DBA

  I was the client installation Oracle 11.2.0.1 on Ubuntu 12.04 (I know that Ubuntu is not supported by oracle)

  I followed the instructions here

  While the installation is the treatment, I got the following error.

  Exception string: error in the call to target 'client_sharedlib' of makefile ' / u01/app/oracle/product/11.2.0/client_1/rdbms/lib/ins_rdbms.mk'. See ' / u01/app/oraInventory/logs/installActions2013-07-29_11-08-38AM.log' for details.

  Please help me solve this problem

  More information

  / temp$ uname - a

  Linux sxa7 3.5.0 - 36-generic #57 ~ precise1-Ubuntu SMP Thu Jun 20 18:21:09 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux

  / temp /u01/app/oraInventory/logs/installActions2013-07-29_11-08-38AM.log tail-$50

  / usr/bin/AR rv /u01/app/oracle/product/11.2.0/client_1/lib/libn11.a /u01/app/oracle/product/11.2.0/client_1/lib/nnfgt.o; FI)

  INFO: (if ['compile' = "binary"]; then------)

  /U01/app/Oracle/product/11.2.0/Client_1/bin/gennfgt > nnfgt.c

  TARGET_BINARY_INTERFACE =

  export TARGET_BINARY_INTERFACE

  GCC - m64 - c nnfgt.c

  -f /u01/app/oracle/product/11.2.0/client_1/lib/nnfgt.o rm

  MV - nnfgt.o /u01/app/oracle/product/11.2.0/client_1/lib/

  / usr/bin/AR rv /u01/app/oracle/product/11.2.0/client_1/lib/libn11.a /u01/app/oracle/product/11.2.0/client_1/lib/nnfgt.o; FI)

  INFO: End of the generated process exit.

  INFO: ----------------------------------

  INFO: Call unixActions10.2.0.3.0 Action are

  registerOnly = false

  installMakePath = / usr/bin/make

  installMakeFileName = /u01/app/oracle/product/11.2.0/client_1/rdbms/lib/ins_rdbms.mk

  installTarget = client_sharedlib

  undoMakeFileName =

  installArguments = ORACLE_HOME=/u01/app/oracle/product/11.2.0/client_1

  logFile = /u01/app/oracle/product/11.2.0/client_1/install/make.log

  undoTarget =

  progMsg = construction Client Shared Libraries

  NEWS: Shared libraries build customer

  NEWS: Shared libraries build customer

  INFO: The output of this operation is also available to: ' / u01/app/oracle/product/11.2.0/client_1/install/make.log'

  INFO:

  INFO: Starting the process generated output:

  INFO: ----------------------------------

  INFO:

  INFO: /u01/app/oracle/product/11.2.0/client_1/bin/genclntsh

  INFO: / usr/bin/ld: cannot find /usr/lib64/libpthread_nonshared.a inside

  INFO: collect2:

  INFO: ld returned 1 exit status

  INFO: genclntsh: failed to bind libclntsh.so.11.1

  NEWS: make: * [client_sharedlib] error 1

  INFO: End of the generated process exit.

  INFO: ----------------------------------

  INFO: Exception thrown from action: do

  Exception name: MakefileException

  Exception string: error in the call to target 'client_sharedlib' of makefile ' / u01/app/oracle/product/11.2.0/client_1/rdbms/lib/ins_rdbms.mk'. See ' / u01/app/oraInventory/logs/installActions2013-07-29_11-08-38AM.log' for details.

  The exception severity: 1

  Thank you Srini,

  The problem was resolved after the creation of these soft bindings

  ln-s/etc /etc/rc.d

  ln-s/usr/bin/awk/bin/awk

  ln-s/usr/bin/basename/bin/basename

  ln-s/usr/bin/rpm/bin/RPM

  ln s /lib/x86_64-linux-gnu/libgcc_s.so.1/usr/lib64.

  ln s /usr/lib/x86_64-linux-gnu/libc_nonshared.a/usr/lib64.

  ln s /usr/lib/x86_64-linux-gnu/libpthread_nonshared.a/usr/lib64.

  ln s /usr/lib/x86_64-linux-gnu/libstdc++.so.6/usr/lib64.

• 40738 ERROR WHEN INVOKING A REPORT BY THE DEVELOPER OF FORMS

  I've created a new report and put it in the current directory to run drunk when I try to use:
  
  REPORT_ID: = FIND_REPORT_OBJECT (lower (NOMBRE_REPORTE));
  If id_null (report_id) then
  message ("postponed not found...'");
  end if;
  the report_id is null and the following sentence show me error 40738 Argument 1 to builtin RUN_REPORT_OBJEC cannot be null
  
  rro_report: = RUN_REPORT_OBJECT (report_id, ALIST);
  
  I do not understand why this occur if the report is in the correct directory. When I try you launch an old report it work.
  
  What I have to do for the reportserver can see the new report...
  
  All can help me please...

  Hello

  try something like that.

  DECLARE
  repid REPORT_OBJECT;
  v_rep VARCHAR2(100);
  rep_status VARCHAR2(20);
  
  BEGIN
  
  repid := FIND_REPORT_OBJECT('REPORT6');   --Report Name
  SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
  SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
  SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
  SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no p_parameter=' || to_char(:block.ID );
  
  v_rep := RUN_REPORT_OBJECT(repid);
  rep_status := REPORT_OBJECT_STATUS(v_rep);
  WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
  LOOP
    rep_status := report_object_status(v_rep);
  END LOOP; 
  
  if
   rep_status = 'FINISHED'
  then
    WEB.SHOW_DOCUMENT('http://sarah:8890/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1) ||
    '?server=repserver' );
  else
    message ( 'error while running reports-object '  || error_text );
    message ( ' ' );
    clear_message;
  end if;
  end; 
  

  Sarah

• How to compile the files in c ++ in the Terminal? Where to find the Makefile?

  Hello who can help

  I have three files in a directory as follows

  IntRateCalculator.h

  IntRateCalculator.cpp

  main.cpp

  my book shows me something like this

  $ make

  GCC - c IntRateCalculator.cpp.

  GCC - c main.cpp.

  GCC-o main.o IntRateCalculator.o rate function

  I tried these welcome in the terminal, but they have not worked and terminal showed me errors. Then I realized later that I need to use the makefile provided on a UNIX platform so that it to work.

  So where and how do makefile?

  Thank you very much for your help!

  Hello BingZL,

  What kind of errors do you have?

  However, it is a debatable issue. You should find a new book, because these commands will not work. You need a Makefile before running. You'll need Xcode or the tools command line, nothing to do with C++.

• Model VeriStand compilation error: NEITHER VeriStand 2010 cannot find the struct parameter in CGTypes

  Hello

  I get this sequence of messages when I try to compile a model.

  ...

  # Generating API interface TLC.
  ...........................................................
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io.c file
  ...................................
   
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io_data.c file
  Error: # NOR VeriStand 2010 cannot find the struct parameter in CGTypes
   
   
  # NEITHER VeriStand 2010 modifying Pack_L500_IB_plant_fstep_io.h file

  # File Readme of Ports generating NI VeriStand 2010
  Could not find c:\WorkDir\Models\Pack\pack_l500_ib_plant_fstep_io_niVeriStand_rtw\*.obj
  # Time real workshop build procedure for model: 'Pack_L500_IB_plant_fstep_io' aborted due to an error.

  I tried to repair my VeriStand 2010 installation and always errors.

  I created a VM, installed Simulink and Veristand and tried to recompile the template. Error appers again.

  I changed the "target system" (tlc file) in general relativity, and the model has been compiled without errors. Same VxWorks Veristand target fails.

  If I copy the other target to target VS the second error le.obj goes but I always "error: # NI VeriStand 2010 unable to find parameter struct in CGTypes.

  How can I solve this problem?

  See you soon,.

  Claudio H.

  Hello

  I found the problem but not the reason.

  If I change the Settings of Configuration > Optimization > Parameters Inline unchecked = the template compiles without problems.

  See you soon,.

  Claudio H.

• Reach target FIFO in the event structure will not achieve

  Hello

  I'm just counting the time in ticks between edges mounted on two digital channels. Therefore, I use a myRIO and LabVIEW 2013 SP1 on a Windows 7 PC.

  As you can see in the attached photo, I use a FIFO extended target to switch the number of ticks between two SCTLs events to a while loop, where I want to send them via DMA to host of the RT.

  I chose this model to limit the number of DMA channel and increase the SCTLs clock (allows greater accuracy in time). The number of ticks is determined using the DSP 32 bit - built-in counter.

  However, when I run the VI no data is written to the target FIFOs scope. 'Number of elements to write' is still 127 (128 requestet), 'Number of items to read' is always zero. "ch0 post" indicates that the "real" State of the structure of the case is actually entered.

  Edit: all indicators have been added for debugging purposes. Simulation on PC indicates no error either, but I realized that no data is written to the host of RT during actual use.

  I checked the cRIO programmers guide and the high Performace FPGA Developer's Guide and do not see where I was wrong. However, it will not work.

  I would be happy if someone could help me solve this problem!

  In the lower part while loop what do you do if one of the read FIFO has expired (zero cases in the structure of the case)?

  If you set the Boolean value False in any other case (1.3) then you'll only send something to the host when the two data FIFOs received in the same loop iteration.

  If she receives a number of cycles on a FIFO in an iteration, and a number of cycles on the other FIFO in the next iteration has expired will never be null.

  To debug you may store the value 'tick count ch0 fifo' in a shift register and update only when the delta_c_ch0 FIFO does not time-out. Then you can see if this value is always nonzero.

• Programmatically move EXE file to RT-target and change the INI to start the EXE when restarting. Then the target restart RT.

  I'm trying to:

  1. download the rtexe on the target in real time
  2. download the file or - rt.ini of the RT target on the local disk
  3. change the RTApp.StartupApplication path to POINT to newly downloaded rtexe
  4. download the ini file edited to target RT
  5 reset
  6. the new rtexe should start to run

  When manually deploy the application of RT through the Project Explorer and manually restart the target RT works very well.

  However if I follow the steps above using the attached VI, to restart it does not start the EXE and loses the connection with the RT.

  When I try to reconnect, he said:

  "Errors were detected in the log of the target when connecting to the target:

  LabVIEW: (Hex 0x63B) target the RT has not enough memory to load the startup application. »

  Now why is there enough memory when the EXE is deployed through the Project Explorer, but not enough when the EXE file is moved manually?

  If there is an easier process or to achieve this goal, please suggest.

  Thank you

  Problem solved.  Problem was never in the INI file.

  Apparently using FTP "FTP Store Multiple.vi" used to move the file EXE to the rt to intimidate target must change the file somehow. Instead I just use the FTP "Put several files.vi" and everything works fine.