Error in MAP using PLINK.exe and PSCP.exe

Similar Questions

• I received an error "no mapping between account names and security IDS was done" when I try to back up my files on a network drive. Help?

  I'm running off Windows Vista and have a network buffalo drive 464 concert in order to back up my files.  I get the error "no mapping between account names and security IDS was done" after I try to connect with a prompt asking me a username and password in the drive.  I have not defined anything like that to give me this info before accessing my network drive.  I can read, write, store in the drive of everything except to back up my files on the desktop.  What I'm missing or doing wrong?

  Hello

  Please repost the link that is specific to the issues of backup below in the microsoft forum

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• How to fix error ORA-02289 using msync.exe for WIN32

  Hi all
  
  I'm testing OLITE 10.3.0.1.0 and I got the error Ora-02289 when I sync
  
  any idea to fix it?
  
  Kind regards.
  Charly

  Hello

  The Mobile Manager not correctly delete/create mobile user.

  Mobile Manager is a J2EE Application that connects to the Mobile using the Oracle JDBC Thin Driver repository, it is possible that when some users have been deleted or created, the http connection or JDBC connections has been cut.

  Can you try to reset the metadata cache, delete the mobile user, create and configure this mobile user and then synchronize.

  It will do a full refresh, but it must synchronize the fine after.

  Kind regards.
  Marc

• What is windows error 0 x 80092003 fix it.and how can I get rid of him.

  Impossible to use my windows fix, error ox80092003 memory to come up.a problem is to prevent starting.how thetroubleshooting clean it helps lift.

  Hello

  If please see this thread and follow the instructions on the answer marked as answer.

  I hope this helps. Just reply to the results.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-0x80092003-while-using-fix-it-and-Error-5001/e1b46317-d4c7-402e-b447-6ee2994f52a2

• PuTTY of appeal via Powershell using Plink - how auto answer the key question of safety

  I'm working on a script that you call PuTTY via Powershell using Plink.exe.  However, we use automatically generated keys, so I need to answer the question "do you trust this security key" during the execution of my script.

  I found through this blog (http://www.virtu-al.net/2013/01/07/ssh-powershell-tricks-with-plink-exe/), you can use ' echo y | Plink.exe", however I do not know where to put this in the script to work properly.  Any help would be appreciated!

  Thank you!

  It's the "-batch ' option.  Remove that fixed the issue.

• I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation.

  I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation. I did it

  Hello

  Please see error: 'Please install Adobe installation using Setup.exe' when you install non-English versions of Adobe Creative Suite 3

  Hope that helps!

  Kind regards

  Sheena

• I just installed lightroom cc on a brand new and reveived laptop 2 following errors.  can someone tell me what they mean and wll prevent of sing lightroom?  ERROR: third charge useful Installer vcredist_x64.exe failed with exit code:-2147024546

  I just installed lightroom cc on a laptop computer brand new and reveived errors the following 2.  can someone tell me what they mean and they will prevent to use lightroom?

  ERROR: third charge useful Installer vcredist_x64.exe failed with exit code:-2147024546

  AND

  ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\CHRIST~1\AppData\Local\Temp\{7A86BA4B-C59E-4130-9C4D-DA8765643E21}\Lightroom_6_ LS11\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com

  Download Visual C++ Redistributable for Visual Studio 2012 updated 4 of the official Microsoft Download Center

• No mapping between account names and security IDS made mistake by attempting to use the Task Scheduler

  I have noticed that my msfeedssync.exe were not working or updated so I went to the Task Scheduler to see what was going on and received the number above mapping between user names and security ID error I never use Task Scheduler, but I do not know its also used for RSS updates , I do all my own maintaince so I need only of GI RSS using a 3-year-old dimensions of dell with xp pro and its in tip top except for that shape it came only with a 80 GB hard drive and I've only used 20 concerts in 3 years that I use online for things important and backup storage I hope there is a solution for this because I installed ram to 4 GB and it has a 2.8 ghz Processor blazin fast and is in very good shape all help will be appreciated thanks

  Hello syncere99,

  1. What is the user account in the Task Scheduler are you for the work you are trying to use the Task Scheduler?

  The error code indicates that the user account that was used to create the job no longer exists. This could be because the user account is deleted. I suggest that you remove and re-create a job and check if you have the same problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Sudoers configuration to plink.exe using the root?

  Hello

  I am interested to run the scripts using the file plink.exe. We have allowed on ssh root login on all of our esx servers so should I add the following to our suders file?

  ...

  root ALL = (ALL) NOPASSWD: ALL

  ...

  Or must run the script just because we root? I have not tried yet just in case where it is a bad idea to use the following line...

  I tried to run scripts and he does not here:

  Disconnected: User abandoned when host key checking

  To: line: 1 character: 12

  + C:\plink.exe & lt; & lt; & lt; & lt; -v - lot - pw password1 [email protected] 'sudo-u root /etc/vmware/esx.conf cat.

  Is the error above due to the password prompt? I have connected to the server before...

  Thank you

  Packetboy.

  The PuTTY tools (including plink) cache host registry keys.

  The first time that you connect to a server, it will ask you if you trust the connection.

  If < Yes >, the host key is stored in the registry, and calls will not ask the same question.

  I suspect that this is the first time that you connect to the host with the PuTTY plink controls is called in "batch" mode, it can't show you the question.

  The simplest solution is to connect once interactively (with putty.exe for example) to the host and let it store the host key in the registry.

  BTW, if you allow root connections SSH (which is not recommended for security reasons), there is no need to configure sudo on the host.

• Error message at startup: "cssauth.exe instance cannot start due to an initialization error" and also unable to open help and the file

  Original title: cssauth.exe instance cannot start, help and Support of file disable

  Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. What is the brand and model of the computer?
  4. who help and support files are you referring to?
  5. what exactly happens when you try to open it? You get the error message?

  cssauth.exe is related to the Client Security Solution.

  Step 1: Try disabling startup cssauth.exe in the configuration of the system.

  Here's how:

  1. click on start > run.
  2. type msconfig and press ENTER.
  3. click on the Startup tab.
  4 locate cssauth.exe, and clear the check box for this.
  5 restart the computer and check for the issue.

  Step 2: If you still get the same error at startup then perform the clean boot on the computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.

• "The specified network folder is currently mapped using a different user name and password", trying to connect to a remote drive.

  Original title: the specified network folder is currently mapped using a different user name and password.__To to connect using a different user name and password, first disconnect any existing mappings to this network share.

  I am trying to connect to a remote drive. I clicked to map the drive, entered the name of the drive, came the name of login/password for the computer turns on and then it give me this error message: the specified network folder is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share.

  In Windows 7 Enterprise, I would like to point out that, if you map \\server1\share1 as drive letter X using "user1" and "password1", then try to map \\server1\share2 (a different share) as drive letter Y using the same ID "User1" and "password1" and you select 'connect using different credentials' in the dialog box connect a network drive and specify the id "User1" and "password1". you will get this error MESSAGE INCORRECT that says 'the specified network folder is currently mapped using a different user name and password'.

  The message is bad because:

  1. the specified network (action2 in my example) folder is not mapped at all, and

  2. the server (in my example, "server1") is already mapped (to a different and different drive letter share) using the SAME user name and password.

  The error message is wrong in two respects.

  This let me puzzled for a while until I realized that once you have mapped to 'Server1' using the credentials, you can map to different actions on the same server without re - specify the credentials.  It is NOT CLEARLY the 'Map network drives' dialog box, which leads to users (like me, and I'm a programmer by trade) trying to enter credentials again and this incorrect error message.

  David Walker

• Blue Screen Error Code Caused by hal.dll and ntkrnlpa.exe 9F.

  original title: BSOD error Code Caused by hal.dll and ntkrnlpa.exe 9F.

  Currently, I'm having a problem on a Fujitsu T1010 with Windows Vista x 84 installed tablet. At a random time that I use my computer, I get a generic blue screen with information DRIVER_POWER_STATE_FAILURE. The error code is 0x0000009F (0 x 00000003, 0x86f692e0, 0x86f692e0, 0x865a6598). BlueScreenView.exe, I see that the root causes are hal.dll + 997f and ntkrnlpa.exe + f5b28. So far, I've had 14 accidents. I run the driver verifier and the causes are hal.dll + 726c and ntkrnlpa.exe + 2ea5a7 windrvr6.sys + 0. Any help is appreciated! Thank you.

  Timothy

  Hello

  References to Vista also apply to Windows 7.
  
  Updated drivers, BIOS and software control (if any) is a good idea.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - reset after each
  installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error message "no mapping between account names and security IDS was done."

  I installed an external hard drive 1 TB USB to a desktop networked home.  I use this unit to save the desktop system.  I mapped it as a network drive for my wife's cell phone.  She has full network drive read/write permissions.  I'm trying to set up his laptop to backup over the network to the device using the backup utility provided with Windows Home Premium.  When I try to choose the local backup device on the network drive does not appear as an option.  When I try to configure the location using the networking option, I can select the device but then get the following error message... "No mapping between account names and security IDS was done."

  Hello BrkAwa,

  If the network drive does not appear when you try to backup, this means that the network drive is not mapped on your computer.

  Follow these steps to map the drive on your computer.

  1. click on the computer from your desktop or from the Start Menu shortcut. In the toolbar, you will find several buttons, including one called map network drive.

  2. click on it and the map network drive window opens. First, you must assign a drive letter for the connection, and then type the drive or folder that you want to connect.
  The folder may be located on a computer, or remote server that you access, FTP site, or a shared folder on your computer.

  3. If you want to connect to a remote computer only "-" followed by the name of the computer or IP address and then "------" track of the location of the folder that you want to connect.
  If you want to create a drive mapping to a folder on your own computer, type "\\127.0.0.1\" (this corresponds to the local host) or "\\computer_name\", then the path to that folder.
  Sometimes, when you create a drive mapping, you may need to use a special username and password that allows you to connect to it. In this case, click connect using a different user name .

  4. type the user name and password and click OK. Now, you will return to the previous window. Click Finish and the drive mapping will be created.

  5. If you go to the computer shortcut you will see again once a new disk with the letter that you have assigned is listed and you can access it at any time.

  Map the drive, then check if you are able to use the drive for backup.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• error: do not copy WIMGAPI.dll and NAPP7x64.exe of ram

  I'm trying to factory reset my laptop that is running Windows 7.

  I get these errors of two 2 ("' error: fail to copy the WIMGAPI.dll file to ram" and "error: fail to copy NAPP7x64.exe of ram" "), the one right after the other.

  What can at the factory to reset the laptop without the CD with Windows 7?

  

  

  Hello

  I understand that you are trying to reset the PC to the factory settings (without CD) and you receive these errors. I'll be happy to answer your query. Let me ask you;

  • What is the brand and model of the PC?
  • Are you facing problems with the PC you want to reset to factory settings?
  • Which operating system was installed when you bought the PC?

  The error you receive may be due to a corrupt disk sector or your recovery partition is corrupted.

  Your computer is equipped with a recovery instead of disk partition.

  This is how the recovery partition is available for the most popular brands:

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

  You may need to try several times to get everything above to work. If after several attempts, you have no chance, or the machine indicates that there is no recovery partition, your only option is to contact the computer manufacturer and ask for the model recovery disks.

  After the reset, you should count with all updates from Windows Update EXCEPT for hardware devices. Then, you install a good antivirus. ONLY AFTER you have done this, if you replace the stuff of backups or install anything else.

  Note: Back up your data prior to factory reset.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• mapping using the external table error.

  I'm trying to create a map using an external table.
  I'm testing a simple column to column mapping. As simple as you could possibly get.
  Can I deploy the mapping without errors, but when I try to run the map, I get a
  ORA-06564: EXT_DATA object does not exist
  
  I created my external to oracle using the ext_data directory. I can see the data without any problem in TOAD or SQLPlus.
  
  I tried to create a place called ext_data and it helps this creation, but I still get the same error.
  
  Any thoughts?
  
  Dan

  Hi Dan

  You must deploy the EXT_DATA connector (to be deployed as a Directory SQL) that is created under the location of Oracle used for your external table module is in.

  See you soon
  David