Error in step 1... Wizard cannot edit this MSI package

Similar Questions

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• Error Message - Windows Media Player cannot play this DVD because there is a problem with digital copy protection

  I received the following message when trying to play a DVD:Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card. I'm confused that nothing has been changed, added, or updated my system up-to-date. I am running Windows 7 Premium home 64-bit edition. DVD plays fine on my laptop with the same operating system.

  CORRECTION OF THE PROBLEM.

  I can confirm that it is a matter of the DVD CSS protection. MediaPlayer, being unable to decrypt the DVD protection.

  Googled around for "DVD43". The installation program will install a driver that will successfully decrypt DVD protection and will allow you to PLAY the DVD MOVIE ONCE AGAIN!

  Well, that's an alternative. All what I can say is that Microsoft Media Player is broken!

• Error message: no Start Page cannot display this Web Site no Start Page has been configured.

  Hello.

  I work with my client technology company to point their domain on the newly published site hosted on Adobe Business Catalyst. They get the following message when they try to point the domain to ABC...

  "No Start Page cannot display this Web Site no Start Page has been configured. To configure a default start page, set one of your Web Pages to the Start Page. Please contact your administrator for more information. »

  This who should I tell them to do. Thank you.

  In the admin of the web site, change the page to the default page and set as start page.

  

• SE error message: "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your provider staff or the support package 'after updating to iTunes

  Original title: after recent update, the installation software WONT work properly! Help!

  • I am in desperate need of aid. I didn't something again on my computer, but these recent software updates. I've recently updated my my itunes and from itunes then will opens not or install it. It was working fine before that was last updated, but now used. I tried to uninstall several times, in a variety of versions. Still nothing. Is not specific to the user and system wide as well.

    I get a message saying "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

    Anyone know what I need to do? Or how to fix it?

  Hi MxGurl,

  If this occurs after the installation of update Itunes, then go to the following link and check if it helps.

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  http://support.Apple.com/kb/TS1717

  If this does not help, you should contact Apple support or post in the Apple discussion forums.

  http://discussions.Apple.com/category.jspa?categoryID=149

  You can also check out the following link and try the steps by Suresh I Support Microsoft, moderator and Andre.Ziegler and check if this may help

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/11f4e2c0-0595-4c7f-8579-e52d2c4bf36c

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• reinstall iTunes error message "there is a problem with this windows package install." A program to complete this installation could not be run "."

  original title: problems with the installation!

  I'm trying to reinstall iTunes I have experienced problems with it. However, when I try to install an error pops up saying something along the lines of "there is a problem with this windows package install." A program to complete this installation could not be run "." I have no idea why this happens and no idea how to solve this problem.

  Any help would be great.

  Error 9010

  To disable the Desktop Window Manager by process - response: this is a normal message when a process requires exclusive access to the desktop (e.g. use DirectDraw /OpenGl in exclusive mode) or just likes to turn off the Messenger of the window of the Office for some reason any. It is not an error.

  Error 9013

  Press Windows Flag + R

  Type %windir%\system32\SystemPropertiesAdvanced.exe
  Press Ok

  Under performance, click the Settngs

  Check enable the Composition of the Bureau

  Click on apply, Ok

  Error 1002 - I need the specific message

  Installation of the Windows Installer Application

  http://TechNet.Microsoft.com/en-us/library/cc735604 (WS.10) .aspx

  Error 1001-

  Installation of the Windows Installer Application

  http://TechNet.Microsoft.com/en-us/library/cc735588 (WS.10) .aspx

  Reset the Web browser

  Tools > Internet Options > Advanced tab

  Click on the Reset button

  Check delete all personal settings

  Click on the Reset button

  Click Ok

  Close the window

  Restart the computer for the changes to take effect

  Retry Installation

  Error 100 - support contact Apple

  http://TechNet.Microsoft.com/en-us/library/cc774985 (WS.10) .aspx

• "Cannot open this installation package.

  Some time ago I found it necessary to re - install windows using the recovery discs, I had created when the computer was nine (last winter). Since recovering, I have bad to fix some of the software packages that I had run previously. Some problems have been addressed by software publishers and others that I experienced just without. Among the specific programs that I could not install are; odmediaconsolesetup, LS_Update_1.18.18.1_.exe and AdbeRd_US.exe. When I try to install I get a message "this installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package. ' The Overdrive media and Acrobat Reader packages had both installed without problem when the computer was new. The Lightscribe update is new. The computer is an HP model e9260f running Win 7 64 bit.

  Hi auldgeordie,

  You have downloaded such software after the recovery, or they have already downloaded?

  It is possible that Windows install has been corrupted somehow. I suggest to unregister Windows Installer, then re-register Windows Installer and check if that helps. To do this, follow these steps:
   
  a. on the ""Start " menu, click on"run:
   
  b. in the ""Open " box, type"msiexec /unreg"and press ENTER."
   
  "c. on the" "Start" menu, click on "run".
   
  d. in the ""Open " box, type"msiexec/regserver"and press ENTER."

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ThinApp 4.6 cannot generate the msi package

  ThinApp 4.6 question, I can't undestand why, but I am unable to create the .msi package. The error comes at the end of the phase of construction for any application! no problem with 4.5, but you now I need the functionality of Streaming... so I'm stuck.

  creating the file .exe like no problem, but the creation of the .msi fails with the error "cannot find destination path /bin/whatever.msi" (and the .msi file created is obviously unusable)

  Any suggestions?

  @kkware - excuses... did not read your message first.  This looks like an AV problem almost.  That would be my first guess.

  If you have any software firewall or AV, can you delete those virtual machine (take a snapshot of the VM) or turn them off temporarily?

• Error message in Outlook 2003"cannot open this item" after an automatic update of the spam filter Outlook 2003 (KB976882)

  After an automatic update which included KB976882 and restart the computer, I can no longer read the emails in Outlook or in the pane to previow, either by opening the item. Sometimes an error message appears "unable to open this item." Some emails appear to be open, but the view pane is empty (transparent). I suspect that it is related to the update of the junk e-mail filter, but don't know.

  You will find support for MS Outlook in this public discussion group: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.outlook.general

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error: Windows cannot open this file

  I am trying to download a theme to apply to Windows 7. After download and I click on it, I get an error message saying that Windows cannot open this file. When I click on the link to watch online for a program to open it, windows says that it cannot find a way to open it. Then, how to make a theme for Windows 7 after it is downloaded.
  See you soon,.
  Abdukarahaman

  Where did you download the theme? Have you downloaded it from the Gallery of official themes for Windows 7?

  Have you tried to download it again and see if it works?

  Please note that themes work only in Windows 7 Home Premium, professional, Enterprise and ultimate edition.

  Themes are not supported in Windows 7 Starter or Home Basic editions.

• Reopen the period AP with APP-SQLAP-10363 error: you cannot reopen this period because the corresponding period to the Oracle GL or PO is not open

  Hi all

  I have a question about the period of reopening AP with error APP-SQLAP-10363: you cannot reopen this period because the corresponding period to the Oracle GL or PO is not open.

  
  

  I checked the implementation of Oracle Payables Guide ,
  
  documented that you can reopen a closed period if the corresponding accounting and buying periods are also open.

  
  

  The user do not purchase Module install, if not show the error, right? Or what other pupup notification to the user?

  
  

  
  

  Thank you

  Michelle
  

  Hi Michelle,

  The code (apxsumps.fmb) checks if the State of closure in GL and PO are 'C' or 'P' for the period to be reopened. If the purchase is not installed and not used, then this query should return no rows and not cause this error.

  Cheryl

• Help! Setup Wizard cannot connect to the router!

  I tried several times to install this router wireless MO # BEFW11S4.

  I get an error message that Setup Wizard cannot connect to the router!

  I pressed the reset on the back button each time, it is turned off, check the cable connections between the modem cable to the router, then router to the computer.

  After dropping out of the router and connect the PC to the top with the modem, the PC is then connected to the internet once more.

  How to solve problems, or isolate the problem as a bad router?

  Please send me a PM for any suggestions or help.

  Thxx

  (Note to mod: Email address removed.)

  Thank you very much this has helped. You don't mention there was a button "generate" to create the password agorythm code to use as a password.

  Thank you! Problem has been resolved.

• An error occurred while troubleshooting the Troubleshooting Wizard cannot continue error 0 x 80040154

  Original title: widows update does not work. Microsoft Fix - It fails with the error 0 x 80040154. What can I do?

  Widows Update does not work.  Microsoft Fix - It fails with the error 0 x 80040154

  The notice reads as follows:

  "Year error occurred while troubleshooting.

  The Troubleshooting Wizard cannot continue

  "error 0 x 80040154."

  I don't have an update since February 28.

  Now, Windows Update and Fix - It don't work.  What can I do?

  Error: 0 x 80040154

  Hello

  1. don't you make changes on the computer before the show?
  2. what update does not work?

  Method 1:
  Perform a clean boot and check if the third-party software are causing the issue of updating.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 2:

  Manually, try to install updates from Microsoft Download Center.
  a. visit the Microsoft Download Web site, type the number of "KB" of the update in the search box and press ENTER.
  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.
  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.
  d. When you are prompted, click open to install the update.
  Microsoft Download Center
  http://www.Microsoft.com/en-us/download/default.aspx

  Method 3:
  You can try the procedure described in the supplied knowledge base article and check.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• Password reset disk error - "year error occurred while the wizard attempted to set the password for this user account.

  Hello!

  -A bit of background: the desktop PC that I use is Windows Vista Ultimate Edition, with active user accounts total five. I have my own account, and I can access the computer through (or through account from my brother, because I know its password).--

  I had this problem recently came where the administrator password (that I know for a long time and never changed) no longer works. So, after some research, I created a reset password on a USB disk, that I found in my house. I managed to create the disc, but when I tried to put the new password, I got the message error "an error occurred while the wizard attempted to set the password for this user account', which I must say is not very clear. I found a few methods of force - reset the password for the account of the admin, as using a sort of Windows Vista DVD or go to Safe Mode to find the hidden administrator account... but I have no idea what this DVD is or where to find, and in Safe Mode, there is no account user administrator to be seen. I believe that my machine is corrupted, but I don't want to buy a new. I want just to reset a password...

  Any help is appreciated. If I was not specific enough, I can specify in comments.

  Thank you!

  Hello

  You must make a password reset disk before that there are problems with a password, not afterwards.

  ________________________________________________________________

  Read this for your problem:

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  _____________________________________________________________

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.