Error installing Windows 7 0x8030002F

Similar Questions

• HP Compaq 6005 Pro small format: error installing Windows 7 64 bit

  I install windows 7 64 bit, an error message, please guide me how to solve this problem

  

  thainguyenvl

  Hello;
  
  Let me welcome you on the HP forums!
  
  Unfortunately, the image you posted does not in the forum - then please provide the error text.

  We can proceed once you provide the information.
  
  Thank you

• Re: Error installing Windows 7 64 bit on Satellite A200 1AS

  Hello
  I get an error when installing Windows 7 on my Satellite A200 1AS:

  Status: 0xc000035a
  Info: Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode

  But by searching on Toshiba website compatibility of Win7 on Satellite A200, I find always it should be possible to install Win 7 64 bit if serial number has a 7, 8 or 9 on the second position. My serial no begins with 57...

  Could someone help me find the reason for the error.

  Thank you
  Dieter

  Well the laptop seems to support the Intel® Pentium® Dual-Core Processor T2080
  Here are some details on this CPU Intel:
  http://Ark.Intel.com/products/29740/Intel-Pentium-processor-T2080-(1M-Cache-1_73-GHz-533-MHz-FSB)

  The Set statement is 32 bit and the CPU does not support the Architecture Intel® 64
  + Intel® 64 architecture has 64-bit computing on the server, workstation, platforms mobile when it is combined with the support of software. Intel 64 architecture improves performance by allowing to address more than 4 GB of memory, virtual and physical systems. +

  So it could be possible that you will need to install Win 7 32 bit instead of 64-bit

• Error installing Windows 7 on Precision T5400 with Configuration RAID 1

  Hello I need yout help to understand why I'm not able to install Windows 7 on my Precision t5400 workstation. I get this error at the end of installation "installation of windows could not configure windows to run on a hardware on this computer."

  I had set up a RAID 1 array on this workstation and I think that the problem is due to that but I'm not sure. Can someone help how to solve this problem?

  GIovanni of tanks

  The issue is Basic but depends on whether it is the

  Optional PERC 6 / i material integrated PCI - e SATA/SAS RAID or card INTEL RST driver AHCI.

  Advanced Format drives NEED F6 drivers.

  Also the Raid container must be configured CTRL m and initialized before installing the operating system.

  Windows 7 requires INTEL RST 9.6

  Intel RST replaces Intel Matrix Storage Manager.  HOWEVER you cannot update to your hearts content of 7-8-9-10 11-12 or 13 etc.  As newer chipsets and drivers get the older ICH5 6 7 8 9 etc. are removed from support.

  Downloadcenter.Intel.com/.../15251
  Version 9.6.0.1014 maybe the max for your motherboard

  PCI\VEN_8086 & DEV_2682 & CC_0104 = "Intel(r) ESB2 SATA RAID"
  PCI\VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
  PCI\VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
  PCI\VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / 5/3400 SATA RAID.
  PCI\VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/5 Series SATA RAID.

  NEWER versions (not necessarily supported on OLD chipsets)

  • 10.1.0.1008
  • 10.6.0.1022
  • 11.0.0.1032

  * Microsoft .NET Framework 3.0 or newer is required to be installed on the system so that the Intel® Rapid Storage Technology User Interface install.  Note that not all Microsoft * operating
  Systems have .NET 3.0 or later version installed by default

  The error means windows can't SEE not all hard disks.

  

  Installation of Windows Vista/7/8/10 and Windows Server 2008 for a new RAID controller

  Follow these steps to configure the driver when you add the RAID controller to a system that already has Windows Server 2008 or Windows Vista installed.

  1. Insert the Windows DVD and reboot the system.
  2. Select location information, such as your country and language.
  3. Enter the Windows key.
  4. Select the drive you want to install Windows on highlighting your choice.
  5. If necessary, select load the driver .

  NOTE: You don't need this for PERC or SAS installation because the driver is native on Windows Vista/7/8/10

  The driver can be provided by CD, floppy disk, DVD, or USB flash driver.

  1. Navigate to the appropriate location, and then select the driver.
  2. Select Next if selected unallocated space corresponds to the target location.
  3. Select forward to create a partition for the operating system.

  For more information on the minimum partition size, see the documentation for the operating system.

  1. Select Next.

  Installation of the operating system starts on the highlighted choice (partition or unallocated volume) and the system will reboot several times.

  Is not Press the to boot from the CD/DVD.

  1. Enter the user information and password.
  2. Enter the name of the computer.
  3. Select the level of automatic protection Windows.
  4. Set the time, date and time zone.
  5. Click Start.

  Windows checks your system and prompts you to enter the password for the connection after a few minutes.

  .

• Error installing Windows 10 0 * 0 * C1900101 - 20017

  I have tried 5 times to install windows 10 but every time it's just after restarting windows 10 logo watch and hang up there for hours and automatically stop itself. and when I restart the laptop it shows error 0 * 0 * C1900101 - 20017

  Currently I am working on Windows 7 Ultimate (OS 64 - bit, 4 GB Ram), CORE i3 2.4 GHz processor. I want to upgrade to windows 10.

  You are a great example of why you should not spend

  You have backups of your personal files no.

  You have No image of your complete installation system

  Why would you risk of these things just to win-10 update

  Luckily, you have the error

  I perhaps misjudged M$ error reporting that it works very well :)

  Get your priorities straightened

  1 should be to buy an another 1 TB Western digital hard drive black (really need 2)

  2nd would be to create a complete image of the system with Macrium free on it.

  http://www.Macrium.com/reflectfree.aspx

  3rd would be to copy and paste all your personal files to another partition on the new disk hard 1 TB.

  After all this clean all your personal data on the existing hard drive

  Then you can update if you wish, but you really need a bigger hard drive you have cultivated the existing one :)

• Windows installation encountered an unexpected error installing windows, restart the installation

  That's what happened with me when I try to install window7 on my PC that already had windows8.

  I also created a new partition for this problem but cannot install window7 perfectly.

  And there is a big problem with my PC, it is unable to boot from USB and DVD

  I don't really know what to do with my PC everyone please help me solve this problem

  It will be really grateful to you.

  

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of your computer?
  2. how you install Windows 7? Is using Windows 7 program stored on your computer?

  Thank you for details on the issue.

  This behavior can occur if the hard drive has a bad sector or the master boot record is damaged.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Use "Bootrec" tool to rebuild the master boot record (MBR) , then check the issue.
  Refer to this article:
  Use Bootrec.exe in the WINRE to resolve startup problems
  http://support.Microsoft.com/en-us/KB/927392

  Note: You can use ' / FixMbrcommand"" ".»

  If this does not help, use method 2.

  Method 2:
  Run disk check and see if it helps.
  Refer to this article:
  Check your hard drive to find errors in Windows 7
  http://support.Microsoft.com/en-us/KB/2641432

  Check disk can identify and automatically fix file system errors and make sure that you can continue to load and write data from the hard drive.

  Note: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Error install Windows Management Framework 3.0

  Hi all

  I checked my PC already what I have SP1, .NET Framework 4, but I still cannot install Windows Management Framework 3.0.

  

  Help, please.

  Thank you.

  Hello

  Can you perform a clean boot mode and try to install the program?

  http://support.Microsoft.com/kb/929135/en-GB

  Please also run System File Checker.

  http://support.Microsoft.com/kb/929833/en-GB

  Thank you.

• Error installing windows 8.1 under windows 8 pro

  Greetings. When I was installing windows 8.1 in my windows 8 PC pro.  The installation is abandoned by appearing a message saying that this update is not applicable to your PC.

  Management and maintenance of deployment images tool
  Version: 6.2.9200.16384

  Image Version: 6.2.9200.16384

  Reporting online international settings.

  By default the system language of the INTERFACE: en-GB
  The language of the user interface help is: en-US
  Settings system locale: en-GB
  Default time zone: the India standard time
  Active keyboard (s): 0809:00020409, 0809:00000809
  Keyboard layered driver: PC / AT Enhanced Keyboard (101/102-Key)

  Installed or languages: en - GB
  Type: Partially localized language, MUI type.
  Help language en

  

  S ' ensure that you apply the latest updates before upgrading.

  -Try to switch to a wired connection if you download over Wi - Fi

  Disable/uninstall no matter what third-party Antivirus, you may have installed before the update.

  -Do a clean boot.

  http://support.Microsoft.com/kb/929135

  You can find the details here for which the update is necessary to see the Windows 8.1 update.

  If you encounter problems with the installation of Windows Update, we recommend that you post for help with this question.

  You can also try an automated solution by running the Windows Update troubleshooting tool

  3. you must synchronize your App license; You can do this:

  * On the start screen, tap or click on Store to open the Windows store.

  * Drag from the right edge of the screen, and then tap Settings.

  (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click settings.)

  * Tap or click App updates

  * Press or click on Sync licensing

  4. the Windows store catalog is not refreshing properly.

  To refresh the catalog, try pressing the Windows key and R to open the Run dialog box type WSReset.exe and press ENTER. Restart, then check again the store Windows.

  also:

  http://blogs.technet.com/b/ouc1too/archive/2013/10/25/something-happened-in-the-install-of-Windows-8-1-can-t-be-completed-and-now-you-re-annoyed.aspx

  1. press Windows + W and put updates in the search box, select view installed updates search results.

  2. in the window updates installed, search the update for Microsoft Windows (KB2871389) and right-click on it, select uninstall.

  3. now, using the following links, download the update KB2871389 manually package for your edition of Windows 8 and install it:

  Download link [All versions supported on x 86 Windows 8]

  Download link [All versions supported on x 64 Windows 8]

• Error installing Windows 7 (Error Code: 0x8030002f)

  Basically I run the Installation CD of Windows 7 Ultimate and I get this error please configure your settings of the indicator 9, boot.win things like it please help

  Error code: 0x8030002f

  Running: Windows Vista Home Edition

  Dell inspiron 1545...   Intel Core 2 Duo

  Help, please

  don't worry, I fixed the problem now am running windows 7 ultimate

• Color LaserJet MFP M277dw Pro: Pilot error install Windows 10

  I get "error A fatal error occurred preventing use of the product" while trying to install the printer driver on a computer Windows 10. This printer was purchased at the end of 2015. I tried all the drivers from the first pilot was released and none of them work on Windows 10. I tried to install the printer driver when connected on USB and wireless.

  Hi @Andrew8811,

  There are other drivers, that you can try if you have trouble downloading the software from the HP website.

  Here are a few options to get the drivers for your printer.

  HP EasyStart

  Windows driver for an HP printer

  HP Universal print driver

  If you are still having problems installing after trying the above drivers, you will need to contact HP for further assistance.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

  I hope this helps.

  If this help will testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• Error installing windows 0xc000000e (phoenix securecore)

  Hello

  my hard drive recently fell down, so I replaced it, and now I want to reinstall Windows 7 Home Premium. I have a Toshiba laptop with a pre-installed OEM Windows too. I made a bootable USB key with Windows 7 HP using the download of Windows 7 USB/DVD tool found here: http://wudt.codeplex.com/

  I think I did everything right, but when I start the machine I get this error message:

  File: \boot\BCD

  status: 0xc000000e

  I tried to start another computer and that works very well, no problem! So, I think it has something to do with my BIOS (phoenix securecore). I found sites telling me I should disable secure boot, but my BIOS doesn't have this feature.

  I hope that someone knows a solution for this problem.

  Thanks in advance.

  Kind regards

  Thom.

  Review:http://answers.microsoft.com/en-us/windows/forum/all/0xc000000e-boot-error/ef08ab00-e130-4301-bc80-79d5b414a81f

• package error install window 1721

  Trying to install new program that requires to remove the old version.

  When you remove the 1721 error message saying that my window installer package is not workin

  This tah meems can I instale new program

  any advise?

  Hi olepedersen,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/error-1721/5424d30b-8bb3-43c8-8990-53fe527681b4

  I hope this helps!

• Replacing hard drive, made restoration of the factory, get the message error "installing windows could not configure windows to run on a hardware on this computer."

  OS = Windows 7

  Computer = Gateway FX6840
  Media = gateway recovery media
  Hard drive is set to AHCI in BIOS

  I started meeting with S.M.A.R.T. errors.

  I backed up my data.

  I replaced 1 TB Seagate original with a new 2 hard drive to Seagate Barracuda SATA STBD2000101. Computer is equipped also is from the factory... no additional or modified facilities.

  I tried to restore Windows 7 from the rescue of the disks created with the "Gateway Recovery Management"

  Windows copying files over, the machine restarts, it installs the devices, then it stops at the "installation program starts services" and a window opens with the message "windows Setup could not configure windows to run on a hardware on this computer.

  I can't apply the Article ID: 2466753 because the process of restoration of the plant seems not provide an option to load a driver .

  Any help would be appreciated... Gateway is only interested to collect money.  They have no interest in serving the poor suckers who buy their products (computer is 2 years old so it is out of warranty).

  Thanks for the reply.

  Fortunately, I solved the problem myself (after 19 hours of stress).
  The problem is that the recent hard disk has something different that no longer ages and makes pre-service pack 1 (SP1 solves the problem) versions of Windows 7 incompatible. My set of recovery disks have been created the day I bought the computer, which had no windows updates installed at the time.

  There is an "easy solution" on the Microsoft support site: http://support.microsoft.com/kb/2466753/en-us

  Unfortunately, their method works only if you have a Windows 7 installation disc, which does most of the people who buy computers pre-built manufacturers. Essentially, the solution is to install SP1 from a disc when don't give you the possibility to load drivers during installation, an option that the gateway recovery disks.

  So I thought that, theoretically, if I use my recovery discs to get a clean install on a hard drive that works, then use windows update to get updated (or at least to get SP1), and then make a set of NEW recovery disks (using windows backup: start > all programs > maintenance > Backup and Restore), I should be able to use these discs to install the new hard disk.

  It worked.

  So for someone else who has this same problem with new hard disks, I hope that the above is easy to understand. If not, ask someone else more savvy and show them this thread. Do not forget that at the end to create new recovery disks, it will ask you if you also want to create a 'system' repair disc. DO THIS! This is the disk that you need to start from when you are ready to install.

  Also: If your new hard drive is bigger than the one that you have created the new recovery disks, the partition on your new hard drive (once everything is installed) will be the same size as the one that you have created the records on. You will need to use a kind of editor of score for re - size. I recommend Gnome Partition Editor. http://www.gparted.org

  Burn gparted Live CD and him, resize your partition, and you're done (google for more in-depth instructions).

  Thank you, theloungelizardK, for the offer on the ISO, but I don't need. :)

  Eastan - ITF

• Error installing Windows Update Windows XP SP3

  original title: Windows Windows XP SP3 updates

  I have problems with windows update. IAM on windows xp service pack as 3.i ran Microsoft fix it Center and it detected that my update of windows components are configured incorrectly. Where should I go from here. Any help would be greatly appreciated

  Try to reset the windows update components and verify if you are able to install.

  You can reset windows update components by referring to article:

  How to reset the Windows Update components? http://support.Microsoft.com/kb/971058/en-us>

  Download and save the fix it 50202 from the page above.

  Close all open programs and browsers before you run the fix it.

  As downloads fail, when run you the fix it choose its mode by default when you run the first time.

  When he finished, check if download updates now.

  If updates are still not download after running it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  Please let us know if it did or did not help to solve your problem.

  UTC/GMT is 00: 05, Monday, December 5, 2011

• Error install Windows, "the component you are trying to use is on a network unavailable resource."

  I got the message about Windows Installer "the feature you are trying to use is on a resource not available network.  Click Ok to try again or enter a different path to the folder that contains the NSR2.msi installation package in the box below.  Can someone help me get rid of this? I'm unable to install other products or remove installed products or open some things installed such as Skype, etc.  I tried restore to previous date

  Hi Kayked,

  · Do you remember all the recent changes on the computer before the show?

  I suggest you try the steps listed in the link below and check out the results: how to solve the problems that may occur when you install, uninstall, or upgrade one program on a Windows computer: http://support.microsoft.com/kb/2438651