Error message: commonshell mcsheild dll

Similar Questions

• Equium A60 won't start - error message: Load needed DLLs for kernel

  The problem is the following; in an attempt to start, I get an error message: "Load needed DLLs for kernel.
  Re-install? I made this countless times.

  Following forums, I discovered that this could be a memory problem. However, my laptop has a built-in RAM and I can't change it. I changed that in the expansion without result slot.

  Any suggestions on how to deal with this problem will be greatly appreciated.
  Blessings on you.

  Hello

  Richard's right. Also check it please this document http://support.microsoft.com/kb/812450/en-us maybe it helps!

• Impossible to play games, get the error message, the MSVCP60.dll file is missing

  I got the game of mahjong quest and game of mahjong quest 2. Now I can not play
  I get an error message MSVCP.60.dll file is missing. Error 126
  Is there a solution to this problem

  Thanks a lot for your answer
  I took my computer to the local repair man
  It solved the problem for me.
  Concerning
  Shirley

• help with this error message (load needed DLLs for kernel)

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error message load needed DLLs for kernel in Windows XP
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·         When you get this error message?

  Refer to the following articles:

  Error: load needed DLLs for kernel. : http://support.microsoft.com/kb/326671

  http://support.Microsoft.com/kb/812450

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed.

  I am running Windows 7. I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed. Also, I lost the ability to transfer MP3s to iTunes and convert them. All of the suggestions. I had a virus attack and had to wipe my hard drive, and then reinstall the programs. ITunes is since that happened. Before I could copy a file from my Olympus digital recorder and make the transfer. Now, I can not drag and click between the windows.

  Thank you

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  Option (2)

  Click on this link:http://www.pcerrorfixtip.com/VistaAudioLib.dll-157425.html

  He helped?

• Error message - file inetppui32.dll is not a valid Windows image

  Just started happening after years of use. Each computer xxx.exe file or I try to load I get this error message "xxx.exe - bad Image of the application or DLL C:\WINDOWS\SYSTEM32\intppui32.dll is not a Windows image. valid Please check this against your installation diskette. »
  When I click OK the file loads normally. The problem is that I do that about 50 times when starting. That means "Please check this against your installation diskette"? How this is done? How dooes one to take to solve this problem? Thank you

  Hello

  Please tell us a little more about the system. What is the brand and model of the computer? Do you remember anything specific that past that you think could have triggered these errors?

  In addition, please tell us what you run antivirus software.

  For more information, take a look at this and see the answer marked as the JoseIbarra response.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-the-application-or-DLL-is-not-a-valid/fa12c4dc-C175-4399-A0A9-f50aa085c901

  I hope this helps!

• error message saying a .dll file is missing when I try to acess Mngr.vdmdbg task not found.

  I have uninstalled or deleted my Windows XP Pro VDMDBG.dll because I received error messages after

  I am now using the same IDE on this DIY PC like what I used to have XP Pro running. I ran an upgrade or r disc install to resign the drivers and at the same time you run some programs to uninstall some of the OLD drivers of the motherboard and temporary files, but I must have too deep because now, I have only this error message telling me that a .dll file is missing when I try to acess Mngr.vdmdbg task was not found. Reinstalling the application may fix this problem. Where can I go to download or difficulty this annoyance file or program? Thankx again! -Al

  Sounds messy.

  If you see a message like this:

  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called vdmdbg when the name of the file should really be called vdmdbg.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  PS Microsoft support engineers - "try running sfc/scannow and check if it helps" will not replace the missing vdmdbg.dll file because it is not what sfc/scannow does.  If you want to see an experiment to prove that, let me know because I have a ready-made.

• Error message bad image: DLL C:\WINDOWS\system32\mmebaetf.dll when you try to open any error of application & research settings in the Windows XP computer.

  Original title: msg error Searchsettings & bad Image problem

  How to solve the search parameters & bad image of my windows XP error message? Whenever I start my Windows I have error of search parameters, and if I try to open some applications like YM or CHROME or all the other apps, I received the following message.
  DLL C:\WINDOWS\system32\mmebaetf.dll. It's so disturbing. Please help me solve this.

  With respect,
  Rosaline.

  Hello Rosaline48,

  Thanks for the return of the response.  Have you tried to boot safe mode to see if you can reproduce this error when you try to open any program?  You have scanned your computer for malware or viruses?

  Safe mode:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Last good known Configuration:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

• Outlook Express does not open. MSOE file error message. Missing DLL files

  Hello

  I am unable to open Outlook Express.

  I get the following error message.

  Impossible to open. MSOE. DLL missing. I'm on my

  ary address right now. Please send all messages from * address email is removed from the privacy *

  I changed my

  default email to * address email is removed from the privacy * to

  
  I am unable to open Outlook Express I get the following

  error message.  Cannot open the file MSOE. Missing DLL.

  Right now I use my secondary address. :

  E-mail removed for the protection of personal information

  Please NOTE: I have now a new primary e-mail address is. :

  E-mail address is removed from the privacy *.  I added the number one (1) after the letter

  s. Please send all responses to

  E-mail address is removed from the privacy *.

  ONE) after Linda s number of the letter.  It has been * address email is removed from the privacy *

  hope someone can help me fix this problem.

  Folders.dbx is probably damaged.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.

  Note these possible side effects:

  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. Please understand that you will lose the mail directory structure, and message rules will probably have to be edited.

• Error message: lack of DLL files for all installed programs.

  When I connect I get an error message for each startup program indicating that a DLL file is missing. This also occurs whenever I try to open a program. My laptop is now 4 years old and supposed to be running the Media Center Edition Version 2002 XP, but I don't the had not used for a long time, and it will not open at all now. I don't want to have to reinstall the operating system I have almost 100 GB of programs that I have bought and downloaded. In addition, it leaves me not make a back up of my DVD - RW drive. I tried to use a DVD and a CD, the only thing that works is a flash drive, but I have two 4 GB flash drives, cannot find, but at the current time and the other is 512 MB. Don't know if that makes a difference, but it's a Gateway computer and SP3 is already installed.  I also have problems with automatic updates is no longer installed. When I sent an email to Microsoft their tech support told me to remove the 2 programs, I don't remember which, but it was something 2.0, 3.5 and 5 and now I can't get back them on the computer. In any case, I hope someone can help, because I can't let me put my laptop in the store.  He is already on a wing and a prayer with one hinge broken, but other than the problems that I've listed most are boring, it's a very good computer. And considering that I paid nearly $1,000 for him in 2007, I don't have the necessary funds to replace at this time or that I said even repaired. I hope I can do what to do myself for as long as the software is that anyone can give me instructions step by step.  Thank you.

  There is a detailed post and we appreciate the effort you put in.  But your post is in the forum of the people who use anti-malware Microsoft Security Essentials (MSE) program and this issue does not appear to be linked to the MSE.

  Maybe you deleted the Framework Net updates but I don't know why and certainly cannot be sure of this at the moment.  Your questions may best be resolved if ask you for help at http://answers.microsoft.com/en-us.  Suggest you try the XP or Windows Update Forums.

  Good luck...

• Error message: core foundation dll not found.

  To send a message ' exe of notifying apple synchronization, impossible to locate the component, app could not start because core foundation dll could not be found, reinstalling app can fix the problem. »

  Hello 123helpplease,

  This article from Apple has the error you describe. However, he cannot help because we don't have information on when you get this error message.

  MobileMe: "CoreFoundation.dll was not found" or "Apple Application Support is missing" alert
  http://support.Apple.com/kb/TS2211

  If this does not resolve your problem, it would be better for you to contact the Apple support.
  http://www.Apple.com/support/

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I boot, receive 2 error messages that msprab.dll and uhexofip.dll are not available - how can we get these?

  msprab.dll

  uhexofip.dll

  Receive error messages on startup that these files are missing/unavailable. Tried to go back to the last good configuration, but that did nothing. How can I fix?

  These files were probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove references to the files.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Error message on Helper.dll while connecting to my PC

  After I connect to my Windows 7, a pop error message saying "there was a problem starting C:\PROGRA~2\3721\helper.dll.  The specified module could not be found.  The computer is again in 3 months.  What can I do?

  It's two things, it's either a program that you have uninstalled that did not uninstall properly and part of it is still running. Or it's a virus.

• Windows 7 with the same error message of "Notfication dll has not been registered, program will not work correctly."

  This error message has started to come after have been a Setup screen saver display in Control Panel. It doesn't seem to do anything "not work properly", but it's pretty disgusting to see this error message every time. May is going to help me?

  Ann Snyder

  Coldwater, KS

  Hello

  If you know the name of the dll file, you can register it manually of elevated command prompt:

  Regsvr32 fullpath\yourfilename.dll

  How to run as administrator command prompt (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• Receive the error message that dciman32.dll is absent from Windows 7

  Hello. I've restored my PC to a point of different starting about a month ago and there was an error when I rebooted it lacked dciman32.dll. I downloaded it on the internet (it has been dated to 2004) and put in windows/system32 and it is more showed the error when I rebooted it. I was wondering if it had anything to do with a DVD program that I can have installed. I've also cancelled it until the point of origin at a time given and which did not help either.

  So I've not had a problem since, and now I want to install H & R Block to do my taxes. I get the following error message:

  The program cannot start because DCIMAN32. DLL is missing from your computer. Try reinstalling the program to fix the problem.

  I have searched here and doing a scannow from the command prompt and rebooted but it didn't help.

  What should I do to reinstall this file?

  Thank you.

  Finally solved. I need to copy the file into SysWOW64 not System32.