Error message "component' comctl32.ocx.

Similar Questions

• How to fix ' component 'comctl32.ocx' oe one of its dependencies is not correctly registered: a file is missing or invalid.

  is displayed when you run Word 2007

  Missing Comdlg32.ocx error during the execution of a request? :
  http://WindowsXP.MVPs.org/Comdlg32.htm
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• photosmart HP 6520e all in one scanner error message component is broken

  When I try to scan on my hp photosmart 6520e all-in-one printer I get the message scanner problem scanner of the following component is broken cannot copy or scan

  Hello cm16.

  Welcome to the HP Forums!

  I understand that you receive a message indicating "Problem of Scanner," unable to copy or scan using the Photosmart 6520. I will do my best to help you! I recommend you plug this printer into a live wall, not a surge protector. I just want to see if that makes a difference.

  I would try to do a hard reset on your printer. Leave the printer turned on > unplug the power cord at the back of the printer for more than 60 seconds.

  If you receive the same question, please contact HP technical support for further assistance. Click here to read: worldwide Contact HP. Good luck.

• error of Comctl32.ocx then tried to run an executable file

  When tring to run a particular executable file that is to my confidential official works, I get an error: "" component 'comctl32.ocx' or one of its dependencies not correctly registered: a file is missing or invalid ". I looked around but could not understand as to how it was possible to resolve the error. What can I possibly do to counter the problem? I am using Windows XP 32-bit on my system.

  Hello

  I would like to know if the problem occurs only by opening the specific application or also happens with other applications.

  Update for Microsoft Visual Basic 6.0 common controls: mscomctl.ocx and comctl32.ocx.

  Microsoft Visual Basic 6.0 common controls

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=10019

  It may be useful

• Comctl32.ocx: error "file is missing or invalid.

  When you try to run a particular executable I get the error: "component 'comctl32.ocx' or one of its dependencies not correctly registered: a file is missing or invalid. I looked around, on the internet and I downloaded this file and place it in the System32 folder. I also tried to use "regsvr32 \windows\system32\comctl32.ocx", but that came with an error too. I tried to put in comdlg32.ocx so but it did not work.

  I'm doing something wrong? I'm on Windows 7 Professional 64 - Bit.

  When you try to run a particular executable I get the error: "component 'comctl32.ocx' or one of its dependencies not correctly registered: a file is missing or invalid. I looked around, on the internet and I downloaded this file and place it in the System32 folder. I also tried to use "regsvr32 \windows\system32\comctl32.ocx", but that came with an error too. I tried to put in comdlg32.ocx so but it did not work.

  I'm doing something wrong? I'm on Windows 7 Professional 64 - Bit.

  Here's how I solved my problem (I have Windows 7 64 bit version)

  Reach:

  Beginning

  Computer

  (C) by car

  Windows

  Find the SysWOW64 folder and click on it

  Scroll down to cmd, then make a right click on it and "Run as Administrator"

  type the following command: regsvr32 comctl32.ocx then press enter on your keyboard

  That's all what I need and it fixed the problem

  Hope this helps

  Kris

• I get and error message when you try to play FSX:FSFDT CONTROL PANEL component 'VAYSIMVL.ocx' or one of its dependencies is not correctly registered: a file missing or invalid.

  Mr President

  I joined the community vatsim (the international flight online network) for fsx. It's more realistic than fsx never giving live atc communication with atc controllers. That is why I joined it. After I signed up they asked two software download

  1: fscopilot

  2: fsinn

  both are necessary to connect to vatsim with fsx.

  I downloaded it successfully, and the entire facility was very good and correct.

  Then I started to fsx and he gave me a messsage to fscopilot and fsinn work with fsx and I clicked the Yes option.

  suddenly, I got an error message

  FSFDT CONTROL PANEL

  Component 'VAYSIMVL.ocx' or one of its dependencies is not correctly registered: a file is missing or invalid.

  so I can't open the addon for fsx linking vatsim with fsx.

  Please help me to solve this error, that I really need vatsim to work with fsx.

  kindly give me the right solution.

  original title: crash error and addon fsx

  See: http://forums.vatsim.net/viewtopic.php?f=43&t=58440

• «Runtime Error 339: component GTGRPLST.» OCX or one of its dependencies not correctly registered: a file is missing or invalid. »

  I recently downloaded a program, and when I try to run it, it shows this message: "runtime error 339: component GTGRPLST.» OCX or one of its dependencies not correctly registered: a file is missing or invalid. "I saw that someone had posted this question in the past and have followed the suggestions in the responses provided, but without success. Is there something else I can do?

  I suggest you uninstall then reinstall the program and see if the GTGRPLST. OCX is loaded correctly.

  Let us know.

• Comctl32.ocx component or one of its dependencies not correctly registered: a file is missing or invalid

  ORIGINAL TITLE: Comctl32.ocx

  Hello

  I'm trying to run a program on my computer, but it says ' comctl32.ocx component or one of its dependencies not correctly registered: a file is missing or invalid "." I saw this topic on the forum before and read your responses to these messages. I tried to find the file missing by typing cmd in the start menu, but that failed because the file is not found on my computer. I also did a systemscan as you said in another post, to check if all the Windows files are there, and the scan did not the missing files. But I can't find the file anywhere comctl.
  Could you help me? More information: I have Windows 7 Home Premium (64-bit).
  Thank you!
  Jeroen

  Hi Jeroen,

  We appreciate the effort that you put, to try to solve this problem.

  What is the name of the application you are trying to install?

  Microsoft Visual Basic ships with several ActiveX controls (.) OCX files). These files are automatically saved by the Visual Basic Setup program during installation. The developers want to often save or cancel registration of these and/or their own witnesses at will. This can be accomplished by using a tool such as RegSvr32.EXE or it can be done programmatically through Visual Basic code.

  You can try to update Microsoft Visual Basic 6.0 common controls and see if the problem is resolved.

  (a) go to http://www.microsoft.com/en-us/download/details.aspx?id=10019 and download the installer.

  (b) If you are not successful to run the file normally for the first time, refer to http://windows.microsoft.com/en-in/windows7/make-older-programs-run-in-this-version-of-windows and install it in compatibility mode for Windows XP.

  (c) try to install the program

  For any future reference.

  Refer to this article to see how how to register program and Unregister. OCX files.

  http://support.Microsoft.com/kb/173091

  Let us know if you need help or if you have other questions about windows.

• Firefox suddenly stop working and I get the following error message: could not initialize the safety component of the application. Most

  Error message: has not been initialized component of application security. The most likely cause is problems with the files in the directory of the profile of your application. Please check that this directory has no read/write
  restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and correct the problem. If you continue to use this session, you may see an incorrect application
  behavior when you access security features.

  See:

  • https://support.Mozilla.com/kb/could+not+initialize+the+browser+security+component

• ActiveX error message: "run-time error '429': ActiveX component can't create object" when running FSX 2004

  Hello, I hope someone can help. I use Windows 7 64-bit. on a high spec pc. When you run FS2004 (Flight Sim program) I get the error message "" run-time error '429': ActiveX component can't create object ". " That seems to relate to the flight or the CMF management computer program. This error seems to inhibit access to the CMF. I tried to load the latest ATI driver, but that makes things worse. Has anyone encountered this problem before? Hope it

  Thanks in advance

  Ianzee

  Hello Diana

  Unfortunately, none of the above worked. However, I downloaded a file recommended by Flight1 (the creators of one of the 2 games I had problems with) surprisingly, thisinstantly solved the problem it is called http://www.flight1.com/dx7vb.exe.

  Perhaps in the future someone else have this same problem with Vista 64-bit where the game, they could also try this "correction". Of course, it worked for me!

  Thank you very much for your help & trouble in front of me, it is appreciated.

  Cordially Ianzee

• During the attempt to re - install the iTunes software, I got the Windows 126 error message. APSDaemon, exe-Unable to locate component. MSVCR.90.dll was not found. Re-installing may fix this problem

  I use Windows XP PRO Sp 3. I tried to open an iTunes download & got this message. "APSDaemon.exe that this application was able to start. Could not locate the component that msvcr.90.dll was not found. Re-installing may fix this problem. "
  All this happened after I tried to install a new update Apple iTunes. He kept saying that he could not install... I tried several different things to solve this problem, including doing a system restore in frustration, for 2 days before today... I tried to update iTunes, not always the case. Help, I'm a no techno, so please do not just refer me to somewhere else, I will never understand what I'm told to do, whenever I am sent somewhere else, I can't solve my problem & give up in frustration. Please can someone take pity on me & guide me through the fix?
  A related problem, I tried to run iTunes from the desktop, but I got was the Mini audio player.
  I just tried to recreate that & got again the error messages, the one listed above main & another one that says "iTunes is not installed correctly. Please re - install. Error 7 (Windows error 126).
  Whenever I try to re - install, I get the error again on the component .dll.
  I hope that's enough info to try & help me. I really need this fix to work as I have many meditations downloaded on iTunes, because Windows Media Player could not open the files.   It would take me hours & hours to find where they came, they were downloaded over 4 years!
  Thank you in advance.
  Sylvia

  If you have not had luck in iTunes (https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions#/?tagSet=1234) forum, uninstall and reinstall iTunes as described below:

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.  (If you are using Vista, see THIS instead).

  Go to control panel > Add/Remove programs
  Remove these applications in the following order (do not restart your computer if you are prompted during this process):

  1 iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4 Hello
  5 Apple Application Support (iTunes 9 or later)

  6. iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)

  7. iPod Updater

  8 QuickTime

  Open my computer > C: > Program Files
  Delete these files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Follow these steps if the message "cannot delete iPodService.exe: it is used by another person or program" appears when you try to delete the folder of the iPod.

  1. Make sure that you have iTunes and iPod Update utility are not open.
  2. Press Ctrl-Alt-Delete.
  3. Select Start Task Manager.
  4. Click the processes tab.
  5. Locate the iPodService.exe in the list.
  6. IPodService.exe-click and choose end process.
  7. Quit Task Manager.

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  NOTE: If you have trouble uninstalling applications, or if you have a problem, reinstall iTunes because the installer complains that it can not uninstall the current version of iTunes, see the 'Installation issues' section below.

  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

  Installation problems

  There are several tools to deal with problems installing or uninstalling applications.  If you have these problems, the following should help.  Before using one of these tools (including #3), you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  1 Microsoft has a program install and the resolution of the problems of the uninstalling which is supposed to "work better" and be "safer" to use the old Install Cleanup Utility (3 below).

  2. free Revo Uninstaller.  You can also download a trial version of uninstaller Revo's ' Pro', which has a few more aggressive cleaning options, but this should not be necessary.

  3 Microsoft Windows Install Cleanup Utility.  Although this tool has been the preferred tool to deal with the problems of Windows Installer, Microsoft removed from Microsoft download servers because it seems sometimes deleted more than he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility

• Get the error message on Windows XP dwshk36.ocx

  Original title: dwshk36.ocx

  I get error message dwshk36.ocx.   Help!

  Clarah salvation,

  1. When you get this error message?

  2 - does this happen when you try to open any specific program?

  Method 1:

  Step 1:

  You can try to boot in safe mode with network and see if you are able to access files and folders.

  You can check the following link to start in safe mode with networking

  http://support.Microsoft.com/kb/315222

  Step 2:

  You try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Method 2:

  You can also check the following link and complete the scan line on your computer to check whether your computer is infected with a virus or not.

  http://OneCare.live.com/site/en-us/default.html

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message indicates that Windows Imaging Component (WIC) is missing or damaged.

  Trying to open Turbo Tax 2011, it gives me an error message on the Windows Imaging Component is missing or damaged.   I equipped of Windows Vista-64 bit on my HP Pavilion dv 5 laptop.  They give a place to download the component, but it still does not work.

  Any suggestions?  It seems to be the only program that does not work.  Everything else works well.

  Hello

  1. where did you download the component?

  2. it worked before?

  3. don't you make recent changes?

  I suggest you to uninstall and reinstall the software and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  It will be useful.

• I downloaded for brother's keeper genealogy software and got the error message comdlg32.ocx is not properly registered a file is missing or invalid

  I tried the following:

  -J' downloaded comdlg32.ocx from a source linked and registered successfully in c:\windows\system32. Restarted. Tried to open the program and got the same error message.

  -Uninstalled program. Downloaded again with mozilla set to run as administrator, rebooted, got the same error.

  -Recorded in system32 times Comdlg32.ocx and the folder of the program in c:\program files, set to run as administrator, program can always put the error message.

  -Tried to set the compatibility to Windows XP program, get the same error.

  -Tried to set compatibility to run as administrator.

  The program will run in Mode without failure. I'm just an average user and I'm frustrated to the point of tears. Can you please help? Thank you.

  Thank you very much for the help.  I solved the problem by uninstalling the software and then create an admin login.  I logged in as admin and downloaded the software, installed, then it worked fine.

• Error message when you try to install Windows Imaging Component ' wic_x64_enu.exe «installation cannot find the file update.inf...» »

  I'm installing MS wic_x64_enu.exe and get the error message: «Setup cannot find the update.inf file needed to update your system» I run SFC.exe and found no errors. I also reinstalled. NET40. and I still get the same error message.
  I am Windows 7 Ultimate SP1 64 bit on a HP PC with an AMD Phenom 9150e Quad Core processor 1.8 GHz and 8.00 GB RAM.
  I worked on it for a few days without result.
  Any help will be much appreciated.

  Giles

  Try this search http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-imaging-component-installation-fails-in-my/a13c1e1d-361e-4601-8fc4-4d416edef853?tab=AllReplies#tabs in the registry.

  Run-->--> look forthis key regedit. Already installed.

  I have encounterd this problem by reinstalling .NET.