Error message from DPM 2010 and an unexpected error has occurred on the DPM server during a VSS operation.
Hello
I have a server running on a Windows 2008 R2 server DPM 2010
Currently save a mix of virtual and physical machines, these are a mix of Windows Server 2003 SP2, 2008 & 2008 R2.
The DPM was previously a bit crumbly, but it was supposed to be caused by lack of disk space. A QNAP server was introduced and configured as an iSCSI target. After the initial problems, it works now.
EXCEPT
Three volumes of backup not. They were part of the protection group but they had no point of recovery at all. I deleted their protection groups and have tried to add them to their original groups. These 3 volumes all fail with the following error message:
An unexpected error occurred on the DPM server machine during a VSS operation.
Error details: VssError:Shadow copy the specified volume only is not supported. (0x8004230C)
3 volumes are on 3 different servers.
All 3 servers are running Windows 2003 SP2
3 servers have other volumes that are save successfully and consistantly
There are an additional 3 servers Windows 2003 SP2 that all volumes save successfully and consistantly.
I can run shadow copies on these three volumes on servers
All servers run the latest DPM Agents
3 volumes have unused production capacities, Gig instead of Mb
The pool of storage on the DPM server has two disks in the storage pool, the local disk has 10 TB of capacity and 45% free, the iSCSI target has capacity to 55 and 78% free.
There are no. VSS errors in system or application logs (or I've noticed in just about any other log file) on the DPM server or the customer Server
I have tried to add in the protection group, 3 volumes at once, one at a time or a small directory, or create a new protection group and still get the same errors.
I ran the Windows updates on these servers
So far all I can say the disk permissions look OK and match those of the other volumes of work.
I know that having two drives in the storage pool is not ideal, and it will be changed but not up to what I have fixed the problems on the three volumes.
Hello
I suggest you to report this issue in support for Windows Server 2008 R2: http://technet.microsoft.com/en-us/windowsserver/bb512923
Thank you.
Tags: Windows
Similar Questions
-
When I first set up the option to Backup and Restore to backup some documents (only) on an external hard drive, I got the error message "an internal error has occurred." The parameter is incorrect. (0 x 80070057). Then when the clock reaches the designated backup time, the computer actually perform the backup. But now I am unable to open the backup center and restoration of anyway, so I can't adjust the time, I can not restore or select other files to back up. I simply do not have access to the backup and restore options. I always get the "an internal error has occurred." The parameter is incorrect. (0 x 80070057)" whenever I try. So I still can not turn off the current backup parameter, which is set to back up every night at midnight.
Hello Tjohanne
Please write to the Microsoft Forums.This problem can occur because of a bad sector at the end of the volume that you are trying to save.
However, as a workaround, you can try the following methods:
(A). if you save the backup files in the first 750 GB hard drive, you can save the backup files in the second hard drive 300 GB with the letter E to test this issue. However, if you save the backup files to the second hard disk 300 GB with letter E first, you can try to save the backup files in the first 750 GB hard drive with the letter C or D.
Run (B). disk check to check the hard drive
Note: Please make sure that the DVD DRIVE is the first boot device.
1. Insert the DVD of Windows 7 and restart the computer.
2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.
3. click on 'Next' and then click 'repair your computer '.
4 Please, highlight 'Windows 7' and click 'next '.
Note: A computer can store multiple copies of Windows 7. Please highlight the one that is experiencing problems. The order of the elements in the dialog box is identical to that on the start menu.
5. in the dialog box titled "System Recovery Options", click on "Command Prompt" and type the following commands. Please press ENTER after each command.C:
CHKDSK /RNote: Please replace "C:" with the actual drive letter of the system drive on which Windows 7 is stored.
6. Please let me know if an error is detected.C. now use another backup tool to check if you can back up files on the computer correctly.
It may be useful
Thanks and greetings
Support Microsoft-dieng
Visit our Microsoft answers feedback Forum and let us know what you think
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ -
As I said, I use Mozilla Thunderbird for my emails. I can't send an e-mail. All I get is a message saying: "an error has occurred on the POP3 mail server. What should I do to get this working and sending emails? Thank you, Gary
Suggest you try the Thunderbird support forum at http://getsatisfaction.com/mozilla_messaging.
-
Hello
After looking on any 3rd party retailers appear Anytime Upgrade key for 7 to professional.
When I try Anytime Upgrade system that is integrated and use 'go online to choose Windows7 edition which is best', an error box comes in reading "an error has occurred in the script on this page. Line 0. Char from 0. Script error. code 0. "with a URL.
When I try the store I find nothing either. Can I deduce that Microsoft no longer sell upgrades between versions of windows 7?
Whenever upgrades have long past gone
Finally unless you are interested in win-10 which is.
Many win-7 pro autour on Newegg and Amazon, but they are not at level only oem / system integrator.
You could buy one and a new ssd / HDD to install on and use the original win-7 to move to 10 - win
Then passed to win-10 pro for 99.us.
-
I have a problem with my BSplayer. I'm trying to open a video and the BS 'bar' appears, but there is no video. Another thing appears and it says: "an error has occurred in the application. I hit restart request, it did not work. I also tried to see the bug report, but I couldn't understand him. Please help me. Moreover, it worked great yesterday. And I also tried with other videos but with the same result.
Hello
Uninstall/reinstall or you might ask their Support Forums.
Cheer.
-
Message: "an error has occurred in the script.' when tried to open services
Original title: Internet Explorer Script error
When I go to administrative tools, and open Services, a notification stating 'an error has occurred in the script.'
Online: 31
Tank: 12
Error: Library not regisetred
Code: 0
URL: res://C:\WINDOWS\System32\mmcndmgr.dll/views.htm
Pls help me solve the problem.
I am using windows xp sp3 and IE 8
Hi daveliew1998,
Try these steps and check the result.
Step 1: Scanner of sfc (System File Checker) to see if any system file is missing or damaged. To do this, try the following steps:
a. Click Start, click Run, type cmd and click ok.
b. at the command prompt, type sfc/scannow and press ENTER.
c. once the analysis is complete, restart the computer and check if the problem persists.Note: You will be asked to insert the Windows XP disk, if a file is missing.
For more information, see Description of Windows XP System File Checker (Sfc.exe)
Step 2: If the problem continues, check if it runs in safe mode, and you might consider the publication of details for further assistance
See start the computer in safe modeVisit our Microsoft answers feedback Forum and let us know what you think.
-
Error on the Page and an error has occurred in the script on this page
Hello
Work with HR HTML X 5
Generate webHelp and pro
When I go to 'VIEW', a topic that I get the below error
An error has occurred in the script on this page
Line 41
1 tank
Error 'keywordsHelp' is undefined
Code 0
URL: XXXXXXX
Do you want to continue running scripts on this page?
BUTTONS, YES and NO)
IF I go 'NO' or 'YES' to the above, my help window opens upward, but on the status bar on the side right it will keep showing "error on page".
Help, please
Thanks to you all
KewalTo the best of my knowledge, HR inserts not all onLoad events. It seems that the model you have onLoad event (I don't know how it got there), but there is no javascript file referenced so it errors.
If you do not need this onLoad event, then pull it out, but how did get there? What is a hereditary project? Make sure that this is not something that should be there, and what's the problem, it's that there are no referenced javascript files. Talk to one of your developers, they will understand.
-
Hello, since I've updated for Firefox 27.0.1 on Windows 7, I have a problem with Reporting Services on a Sharepoint site. It is a site of Sharepoint 2010 with SQL Server Reporting Services 2012 Sharepoint integrated mode. I was already on Firefox version 26 and didn't meet with this problem.
When a report is opened and you use the Actions link on the Reporting Services toolbar, I get the following error messages.
An error has occurred with the extraction of data. Please, refresh the page and try again.
I tried updating to the beta version of Firefox 28 but the same error occurs. I see that someone else is having the same problem here. http://SharePoint-community.NET/forum/topics/reporting-service-and-Firefox-27
Any help would be appreciated. Thank you!
Ryan
Firefox version 28.0 has corrected this problem. Thank you!
-
How can I fix, "an error has occurred in the script on this page line: 2107"?
How can I fix "an error has occurred in the script on this page line: 2107, Char: 1? I've recently upgraded to Explorer 9
Hello
I'll try to uninstall IE9 as shown in the link below.
When this is complete and you have restarted the PC, see if you can now print. If everything works well, try reinstalling IE9 with your security software temporarily disabled during installation.
Kind regards
DP - K
-
Original title: Constanr Error Message at startup.
When I start my computer the message appears on the screen that says "an error has occurred in the program during installation... ox80070002" How can I fix?
Open log on to Windows as administrator or an account with administrator rights.
Click Start | All programs | Accessories | System Tools, and then click System Restore.Then, in the window system restore, click on the option "Restore my computer to an earlier time" (Note: this option)
may already be selected), then click Next.
In her select a Restore Point window, use the calendar to select a date before the day of the change or problem oNext.
Note: A system restore message may appear that lists configuration changes that system restore will make. Click OK.
In the page confirm the Restore Point selection, click Next.
System Restore will now restore Windows XP configuration, and then restart the computer.Finally log on to the computer (using the same Admin account).
The system restore restoration complete 'window' is displayed.
Click OK.Your fact restore the PC to the point in time, you have selected.
J W Stuart: http://www.pagestart.com
-
original title: printing email problem
When I go to print an e-mail I get a dialog box to say that "an error has occurred in the script on this page" and will not print and computer freezes and I have to restart. He just started this. Why and how to fix?
Windows Mail uses the IE print engine. You can print from IE? There was an earlier report that one could not print Windows mail after installing IE9. If you can print from IE, then see if uninstall IE9 (which was installed by default) fixes the problem.
Steve
-
ORA-29702: an error has occurred in the operation of Service of Cluster Group
Hello
After closing down a knot trying unsuccessfully at the start of this node:
SQL > startup
ORA-29702: an error has occurred in the operation of Service of Cluster Group
I got this message.
Here is a log of file: orcl2_lmon_13886.trc
*/Oracle/admin/ORCL/bdump/orcl2_lmon_13886.TRC*
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64 bit Production
With the options of partitioning, Real Application Clusters and Data Mining
ORACLE_HOME = / oracle/DB
Name of the system: Linux
Name of the node: DB2
News Release: 2.6.18 - 53.el5
Version: #1 SMP Wed Oct 10 16:34:19 EDT 2007
Machine: x86_64
Instance name: orcl2
Redo thread mounted by this instance: 0 < none >
Oracle process number: 5
The Unix process PID: 13886, image: oracle@DB2 (MON)
:() 2008-12-19 10:08:26.214 SERVICE NAME *.
SESSION ID: (1102.1) 2008-12-19 10:08:26.214 *.
21522 GHG 8 resource pool
GHG enqueues 33158
GES CPI: Receivers 3 shippers 3
GES CPI: Buffers receive 1000 Send (i: 2750 b:1934) reserve 1000
GES CPI: Msg 408 lot 8192 regular size
Factor of batch processing: enqueue replay ack 201, 224
Factor of batch processing: cache size 126 by 64 lock replay
kjxggin: receive buffer size = 32768
clsc_connect: (0x1d19a030) no listener to (ADDRESS = (PROTOCOL = ipc) (KEY = OCSSD_LL_db2_crs))
* 2008-12-19 10:08:29.819: CSSCLNTclsssInitNative: connection failed, rc 9 *.
kgxgncin: SATC init failed with status 3
kjxgmin: kgxgncin failed - (2)
kjxggin: generic group layer init fails
2008-12-19 10:08:29.819 *.
Stopping the queue Service global
2008-12-19 10:08:29.820 *.
enqueue global service detach CM:pid = 13886
I did check the listener, it didn't work, but I start it:
LSNRCTL > status
Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: release 10.2.0.3.0 - Production
Start date December 19, 2008 10:49:42
Uptime 0 days 0 h 3 min 55 sec
Draw level off
Security ON: OS Local Authentication
SNMP ON
Parameter Listener of the /oracle/DB/network/admin/listener.ora file
The listener log file /Oracle/DB/network/log/listener.log
Summary of endpoints listening...
* (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521))) *.
The listener supports no services
The command completed successfully
LSNRCTL >
Could you give me a guide how to start this node? or where is a problem?Before the start of the database, you can, you must start the CRS.
-
A small boc appears in the center of my screen. Says: Script error on top. Then, an error has occurred in the script on this page do you want to continue running the script on this page. YES or NO how to stop this box to appear.
Go to tools-Alt | Internet Options | Advanced (or control panel |) Internet Options | Advanced) in IE and the box disable script debugging and uncheck the box to show a notification of every script error.
Steve
-
Media Player an error has occurred in the script on this page.
When I try to find album info I get the following:
An error has occurred in the script on this page.
Line: 1
Tank: 243
Error: Automation server can't create object
Code: 0
http://fai.music.metaservices.Microsoft.com/fai/scripts/default.js
Do you want to continue running scripts on this page?
Hello
1 did you change on your computer before this problem?2. who is the operating system installed on the computer?Method 1:You can run the troubleshooter in the Windows Media Player library.Open the troubleshooter in the Windows Media Player library
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
Method 2:You can try to re - register wmp.dll file.a. click on start.
(b) in the type box command prompt search.
c. right-click and select run as administrator.
d. type the following commands
regsvr32 wmp.dll, and ENTER.regsvr32 jscript.dll and ENTER.
regsvr32 vbscript.dll and ENTER.
Method 3
You will have to perhaps to regenerate the database of Windows Media Player and see if it works very well.To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:a. exit Windows Media Player.b. Click Start, in the search for box %LOCALAPPDATA%\Microsoft\Media Playertype and then click OK.c. Select all files in the folder and then click on Delete on the file menu.Note: You don't have to remove the folders that are in this folder.d. restart the Player Windows Media .
Note: Windows Media Player automatically rebuilds the databaseMethod 4:Windows Media Player, all by going online to find the information of the Album follows the same set of rules that governs the internet Explorer. Therefore, you can follow the steps mentioned in the article below for a possible resolution to the question:How to troubleshoot script errors in Internet ExplorerI hope this helps. -
an error has occurred in the script on this page. expected tank 21079 error code line 2 0
Windows media player 11an error has occurred in the script on this page.line 2Char 21079expected errorcode 0Hello
Thanks for the post. I understand that you meet the on Internet Explorer script error.
I suggest you check out the link and follow the steps.
How to troubleshoot script errors in Internet Explorer
http://support.Microsoft.com/kb/308260
Hope it will be useful.
Maybe you are looking for
-
Gel downloads Firefox on 1 second after, after reboot download again (safe mode)
This is starting to happen after the update from 28 to 32 (not sure about 28). 1. download whatever it is2 download is complete, the Download Manager (default or any plugin) still have this file fixed on 1 second3. I can't cancel, press 'x' pause.4.
-
GE 31591 Skype cordless phones
I can't make calls to phone numbers all of a sudden. I bought yesterday. He said: I do not have Skype out credit again yesterday it worked fine. I can still make calls via my pc connected, and I can receive calls on the phone, but I can't shout. Help
-
Satellite 2430-201: TV tuner receive only the audio signal
Satellite 2430-201Grapgic card Geforce4 420Go NVIDIA Installed TV tuner: AVERTV USB2.0 The TV tuner receives tv chanells but without audio Grapgic alone.What could be the cause of this problem? Where can I find softwere or update for display? the one
-
Satellite L850D - lines of color on the screen of the BIOS
Hello I have a q L850D-12 (PSKGAE) and sometimes when I try to boot in the BIOS by pressing F2, I get vertical and horizontal lines and colorful on the screen some time, I get a beep sound while its weight this and other times I just get the line tha
-
Hello I just ordered a UTM5 device and use freedns.afraid.org to my dynamic dns service for some time. What are the chances of support for this service? Better yet, it would be possible to add an option to enter an entry custom for DDNS services? Eri