Error message is "There is more than one active network connection on your computer"

Similar Questions

• There is more than one active network connection on your computer

  I have two ISP with 2 different IP addresses of course. With one I connect via cable, the other is wireless. Until a couple of days, I'd keep the Wi - Fi turned off on the front of the case, to allow the laptop to connect only to the cable connection.
  Some sites were not loading, indicating problems with DNS resolution. I checked for possible reasons online. I tried to connect to these sites using a webproxy and it worked, so I thought I would try the wireless connection. I turned on and sites would be load normally. However, when I checked my ISP number this shows that the active connection cable one.
  I hesitated to leave the switch turned on, but in order to leave these sites load, I thought I had no other choice. Needless to say that I am not notified at all or with the networks or computers.
  Everything seemed to work fine until the wireless connection has started having problems anyway, it stopped working (ISP issues), so stopped at new loading sites. I tried troubleshooting it and he said: "it has more than one active network connection on your computer" and suggested I would disconnect them. Naturally, I unplugged the wireless connection. Problems: I can not load the sites that seem to need to have wireless to turn on. Note that it does not need it to be active, only to have this switch.
  Please let me know if there is anything I can do to correct this inability to connect to the servers of some sites without the need to have that switch on. If there is no explanation for this behavior, which does not make sense. Again, I know nothing about networks or computers, forgive my ignorance!
  I use Windows 7 Home Premium x 64, my laptop is a Vaio. This happens on all my browsers and sites that have stopped loading were load normally when I 1st turned on the laptop the same day. To later that day there some sites stopped to load, which made me think it was a matter of site. Then I realized that it was not connect to twitter, which was not down, so I realized it was my problem.

  It looks at when you use the wired connection THAT DNS has failed.

  In order to clarify the names of web sites means absolutely nothing to a computer in itself, www.google.com is completely useless. All comms on a network revolves around the IP addresses and the DNS service is a process by which the dedicated servers which addresses are known can tell your PC what is the address of a Web site. For some reason any on the wired connection your PC isn't getting the address to soundcloud.com.

  In family situations more of a PC it gets the IP of the router settings, of course I don't know if this is true in your case. If you open a command prompt and run ipconfig/all, paste the result here and we can check. This would include which server DNS to use that, as I said is normally the router. There are actually millions of internet addresses, and your router could not store them to remedy this it forwards a request for an address of DNS servers listed in its own configuration of IP internet side.

  If you can connect to the router and look its DSL or WAN configuration, you should find at least one or two DNS servers. Take note of them. If you can't connect to the router then look at the website from your ISP for their parameters.

  On your computer, go to the network control and Internet\Network connections, right-click on your wired card, and select Properties. Double-click Internet version 4 Protocol. In normal use get it 2... buttons should be selected, are they?

  If you change only the down one to use the following DNS server address and enter the fields, addresses that you got the router. Click OK twice, but leave the window network connections open as you need.

  Now, try to get your site into a problem. If you can then the problem is with your router. Instead of asking the router address you have bypassed this stage and went on the server, your router is configured to use.

  If you are still unable to the site then the problem is further down and your router may be OK. Then go back to where you set the addresses DNS and replace those that you got the router and turnkey 8.8.8.8 primary DNS server address and 8.8.4.4 in another address, OK once again two times and then try again the site. These 2 addresses are own Google public DNS servers and should work.

  If the ISP provided the router they should replace it. Explain what is the problem and the results of these tests, although I have no doubt that they insist on their own checks before accepting.

• Is it possible to sort messages in WLM by more than one field at a time?

  Sort messages in Windows Live Mail

  As the help "?" button in the desktop app Windows Live Mail is no help whatsoever *, after much research I landed at MS Answers. Hope someone here can answer what I believe is a simple enough question, although well beyond the capabilities of the foregoing under construction using WLM... Here goes-

  Is it possible to sort messages in WLM by more than one field at a time?

  If I sort my messages received by the field 'From' - by clicking on the field header (whenever you click the header, it changes to alphabetical, reverse alphabetical order) - by default each group of messages from the same sender are listed in order by date/time, earlier at the latest, from top to bottom (opposed to the default order when the messages are sorted by date and time upon arrival which puts the last (most recent) mail messages has received at the top). After you sort messages by sender, is it possible to then sort these messages grouped by date, with the newest messages at the top of the list?

  * Is there a procedure/channel "correct" to say Microsoft's help on the web for MS Office & other apps - like Windows Live Mail - how useless? In the interest of Microsoft, this gap & go back to the built-in Office 2000 help, etc., with an option to get help online, i.e. through the Forums, if the system cannot answer your question.

  Hello UKdeejay,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• XML with XSD validation when there is more than one XSD.

  Hello

  I need to validate an XML against a set of xsd.

  I am aware that, when there is a single XSD to compare, it is possible to compare using xmlDoc.schemaValidate () with xmlDoc and xmlSchema.

  But in my case, there is more than one XSD against which I need to compare the XML code.

  My main XSD has the statement as mentioned below.

  " < xs: import namespace = ' http://www.w3.org/1999/xxxx "schemaLocation ="xxxx.xsd"/ > "

  " < xs: import namespace = ' http://www.w3.org/1999/02/yyyy "schemaLocation ="yyyy.xsd"/ > "

  I don't know how to handle this situation.

  Please, help me!

  Thank you

  Vicky

  Hi Vicky,

  This situation is not different, just validate the main schema.

  But, to use the XMLType schemaValidate method, you must save the schema in the database (via the DBMS_XMLSCHEMA API).

  If the main schema contains imports then these referenced schemas must be saved too.

  To sum up: register all 3 patterns in their order of dependency, then you will be able to validate your XML with the main XSD code.

  () dbms_xmlschema.registerSchema

  schemaURL-online , for example 'xxxx.xsd'

  schemaDoc =>

  local-online true

  genTypes-online fake

  genTables-online fake

  enableHierarchy-online dbms_xmlschema. ENABLE_HIERARCHY_NONE

  ) ;

• can someone let me know how to print a scanned document. In printing only the 1st page prints fine as I know that there is more than one document.

  can someone let me know how to print a scanned document. In printing only the 1st page prints fine as I know that there is more than one document.  This is the version Adobe photoshop cc 2014.  Someone said it you use printing quick button but who can't find anywhere.

  Carolyn

  Carolyn,

  I don't know if Photoshop is the best solution for the printing of DOCUMENTS scanned.  Photoshop opens a page of a DOCUMENT at a time, let's say you have a MultiPage PDF Document, when you open with the PS, tell him what page you want to open. Once you do, it will convert this page into basically a picture, a raster file that can be edited like a photo.  So if you go to print, it prints only one page, you have open...  So, if you have opened the first page of your document and go to print it, which explains why it only prints the first page.

  So is what file type of the document that you are trying to print?  If it's a PDF file, I opened it with Acrobat/Reader, depending on whether you have and that FILE you > PRINT it like that.   Or is there a particular reason (Lighten/Darken/increase contrast etc...) you are needing to go first to Photoshop?

  Give me a little more information on exactly what you're trying to do and I'll do my best to provide a workflow easier to achieve your final goal.

  I hope this helps.

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• Netflix gives an error "as you look for more than one tab"

  You can get error N8008 of Netflix by saying that you are viewing Netflix since more than one tab when you are not. In some cases, you may have to restart Firefox to solve the problem

  Solution:

  • Go to www.netflix.com/clearcookies
  • Once you are redirected, please sign in again.
  • Try to replay the video

• EBS - more than one active user session?

  Hi all

  I was wondering if there is a way to set up the application so that a user cannot connect to more than one computer?

  I mean, is it possible for example that a user connects a computer and then when logging into another, the system closes the session in the first?

  Many thanks to all,

  Mario

  Mario Cura wrote:

  Hi all

  I was wondering if there is a way to set up the application so that a user cannot connect to more than one computer?

  I mean, is it possible for example that a user connects a computer and then when logging into another, the system closes the session in the first?

  Many thanks to all,

  Mario

  Please see:

  How can I limit user Applications must be signed only once at any time (Doc ID 375403.1)

  How can I limit user Applications must be signed only once at any time (Doc ID 1628081.1)

  What is the maximum number of users that can share the same name of user/account Applications? (Doc ID 1624635.1)

  Thank you

  Hussein

• Error - unable to print on more than one recipient

  Let's face it, the addresses allocated to our printers are not exactly memorable. My solution was to create a Gmail account with a memorable speech and use the 'Transfer' function to redirect requests eprint for my printer. It does not work and I get an error message saying that I can't send a print request to multiple recipients.

  The option to transfer on Gmail has only an e-mail address in it, my eprint addy, so I'm stuck now what to do next.

  Can anyone solve this you problem or offer another solution to spare?

  Thank you very much.

  Thank you, David.

• I get an error message: "the progran cannot start because DEVOBJ.dll is missing on your computer.

  When I start my computer my screen is all black and the message says 'the progran cannot start because DEVOBJ.dll is missing on your computer. Try reinstalling the program to fix this problem' I don't see even the Start button if someone knows what's going on please help.

  Take a look at the following:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/devobjdll-is-missing-cannot-login-reinstall/5080677a-DB05-4A34-B36F-d0c3329c2dd0

  I would also like to launch a full scan with your antivirus

• BlackBerry Q10 my answers in a text message to go to more than one email address

  When I answered (answer) some of my text messasges the answer goes to the recipient and to others who were not included in the response message.  Sometimes they went to addresses that are not in my contact list.

  Is there a solution to this?

  John

  Looks like you have received a text of the group. You respond to what you think is a physical person but you meet the group, and so will your answer to several people on the original text of the group.

• Why only a single composition plays when there is more than one on a page after you refresh?

  Open Wrapper.html. In it, I have 2 composition (test1 and test2). Both are on autoplay and when I saw everyone on board animate the work very well. It's just when I connect the two compositions in a new document, it gets glitchy. The first charge that both will play, sometimes only plays at halfway. After that updating of the composition that one page plays, the other gets stuck on the first image.

  Dropbox - test.zip

  Is this a bug? How can I do to make the two play normally at the same time?

  Hello

  Files repaired ==> test - 4.zip - box

  You need to clean the panels of your script: the two files.

  

  Then wrapper.html works well.

  A small error with file wrapper: an only div.

  

• ArrayCollection collection only works when there is more than one element.

  Flex 4.6.   XML is generated by php.

  < imgtex >

  < image >

  < pic_no >

  < / pic_no >

  < pic >

  < / pic >

  < tex >

  < / tex >

  < / image >

  < / imgtex >

  When the XML has several lines (pic_no, pic, tex); For example:

  < pic_no > 01 < / pic_no >

  < pic > some.jpg < / pic >

  < tex > text < / tex >

  < pic_no > 02 < / pic_no >

  < pic > some2.jpg < / pic >

  < tex > some Text2 < / tex >

  Control dataGrid and Alert.show () fills this info. But if there is that a single row of (pic_no, pic, tex), the DataGrid remains empty and Alert.show () is not yet displayed.

  Is there something still missing from my code? A single item in the collection ArrayCollection should be treated differently? Thank you.

  Import mx.collections.ArrayCollection;

  [Bindable] private var img:ArrayCollection;

  private void getImgResult(event:ResultEvent):void {}

  IMG = event.result.imgtex.image;

  mx.controls.Alert.show ("img =" + img);

  }

  The example above, I think it would be clearer to do this in your result handler:

  var resultAC:ArrayCollection;

  if (event.result.rows.row is ArrayCollection) {
   resultAC= event.result as ArrayCollection;
}else{
   resultAC= new ArrayCollection(ArrayUtil.toArray(event.result));
}

• Can there be more than one pc per account?

  My colleague (in my Department even) neighbor has Adobe Premiere Pro and the subscription. Can I install the first on my pc and use its subscription as well? Or I have to have my place of work to buy another subscription?

  Hello

  With an e-mail address, you can have only cloud creative licenses, which can be downloaded on both machines.

  In case you would seek licenses for multiple users, you can try creative cloud for teams of pricing and membership creative cloud plans | Adobe Creative Cloud

• How can I add more than one virtual network card?

  I am running Small Business Server 2003 as a virtual machine, there is only one NIC given by VMWARE, I want it 2 because it is a requirement of SBS. How can I do this?

  Thank you

  Jane

  One of the known limits of the VI Client is that it won't change VMs virtual hardware is a greadter of the version 4. Server 2.0 creates VMs version 4 so it looks that you have upgraded the hardware, possibly for support of USB 2.0, which means that you can change only the user Web interface unless you want to do this via the directly .vmx file manually editing.

  You can add the material in the web user interface, you select the virtual machine in the left pane on the left by clicking on it and select "Add Hardware" as directed by the attached screenshot.

  There are ways to downgrade to a hardware version 4 - I only if necessary upgrade for most of my virtual machines are 4 so that I can use the VI Client.