error message "kauth resolver external time out."
Hello
Pay my iMac (21.5 inch, end of 2013, 2.7 GHz Intel Core i5 processor) bought with Maverick, I went successively to Yosemite and then to El captain. And since then, I have a problem starting not to power: the progress bar stuck at 60%. Start-up in Verbose mode, I get the message "kauth resolver external time out."
The only solution is to "turn off, is dry, and tension to under 30." This second time under tension, the mac restarts. A solution that is not terrible.
I used OnyX, but no verification has failed to solve the problem, everything looks ok.
Who has a solution pour troubleshoot this problem?
Thank you for your help.
I too have this problem sporadically with some of our iMacs us upgrades 10.11.3 (from 10.10). By chance are your iMacs have records of merger?
Tags: Mac OS & System Software
Similar Questions
-
Hello
I have recently upgraded to windows 8 and since then, I have a problem.
The Manager.exe HPConnection does not load correctly. An error message is displayed every time that restarting the laptop.
Would you please guide me how to solve this problem.
Thank you in advance and I look forward to hearing from you soon
Best wishes
Hello
Try the following
Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the laptop.
Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.
http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html
After installation, restart the computer again.
Kind regards
DP - K
-
Original title: software download
I did a restore on my laptop and had to re - install software. He downloaded without problem, but now it doesn't let me open - error message is 'Hasp SRM run-time environment (H0033) can anyone tell me what it is and how to fix it. I already ran a "solution" to the problem and it did not help. This software has no problems prior to the restoration.
Hello
This error occurs when the 'HASP License Manager"service no longer works correctly, stopped or not allowed in your environment. Before you continue with the troubleshooting steps, I would like to know some information about this problem.
1. what security software is installed on your computer?
2 What problem confined to a specific software or with any other software?
3. are you referring to the resolution of problems by running to solve the problem?
I would suggest trying the following methods and check if it works for you.
Method 1:
Make sure that the HASP License Manager Service is started. Try the following steps to check whether the service is started or not.
a. press Windows + R keys, type Services.msc and press enter.
b. Locate the Hasp License Managerservice.
c. double-click the 'Hasp License Manager' service and check if the Start button is grayed out or not.
d. If the Start button is gray, then click the Start button to start the service.
e. click on apply then Ok to save the changes.
Method 2:
If you use a security software and firewall on your computer, then try turning it off temporarily and check if the problem persists.
Note: Antivirus/firewall software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus/firewall software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Please reply with the status of the issue so that we can better help you.
-
I use a Packard Bell laptop and this happens everytime I try to turn on my computer. When I restart it, the same message so I'm never able to use it. Your help will be very appreciated.
Hi THOBO90,
1. When did you start to question?
This problem may occur if the MFT root folder is very fragmented. If the MFT root folder contains many files, the MFT might become fragmented to an additional allocation index is created.
Try the following steps to resolve the problem:
Step 1:
Boot with the Windows XP CD in Recovery Console.
b. Copy NTLDR and NTDETECT.COM on C: drive i386 folder.
c. attempts to boot to the desktop.
If not able, follow these steps.
Step 2:
In Recovery Console, run 8 following commands (press ENTER after each line):
a. CD of the
b. ATTRIB C:\boot.ini h
c. ATTRIB C:\boot.ini-s
d. ODILE r C:\boot.ini
e. del boot.ini
f. BOOTCFG /Rebuild
g. Add to the startup folder
Step 3:
If you can start Windows, but get a message saying that the boot.ini file is not valid.
a.Create a new boot.ini in Notepad and saved on the hard drive.
EXAMPLE:
[boot loader]
timeout = 30 default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
[operating systems]
"multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Edition family.
/ fastdetect
For more information, see the following KB articles:
Consult the 330184 KB and follow step 8.
"Invalid Boot.ini" or "Windows did not start" error messages when you start your computer
http://support.Microsoft.com/kb/330184
Windows may not start and you may receive an error message "NTLDR is missing" If Windows is not up-to-date and there are too many files in the root folder
http://support.Microsoft.com/kb/320397
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Original title: software update for my i touch
I am trying to download the 5.01 update software for my Apple i-touch. However, the download is so long that I get an error message indicating that my network connection has expired and the downlopad do nt go through. How to solve this?
Hi Gary,.
What virus protection software is installed on the system?
I suggest you temporarily disable antivirus software (and any other security such as anti-malware software, etc.) and the firewall on the computer and see if that fixes the problem.
Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.
If you still experience the problem, you could get in contact with Apple support for further assistance.
-
I remember more recent changes. I use automatic updates and installing Service Pack 3. Symantec Norton 360 is installed to protect against viruses, but this is not new.
Here is another example of an error message: NDP1.1sp_KB953297_X86_msi0.logversiontxt. I get every day two or three error messages.
Hello
The problem is with the update of security Microsoft .net Framework 1.1 sp1.
There could be a corruption with the .net framework.
First of all try to download the package to update from Microsoft Download Center and install it on the computer:
http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=78ac8b97-8327-4AE1-8BB0-6cf227f3968fIf manual installation fails, you must delete all versions of the .net framework from the computer and then reinstall on the computer.
Follow the steps mentioned in the link to the following Microsoft article:
http://support.Microsoft.com/kb/923100Cheers and enjoy... :))
-
In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem
0X8007000D ERROR_INVALID_DATA
Try to manually download the update and installation
http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basicIt will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services
-
Handle the error message when OC4J instance is out of service
We have two different instances of OC4J running on a server. There is a flow of control from one OC4J instance to another routed via the mod_oc4j.conf. When the target OC4J instance is down, on access to the current instance of OC4J instance a 500 Internal Server Error occurs. Any suggestions on how to handle this exception and display a custom error message?In the httpd.conf file, you can change or add lines for this erros like that...
ErrorDocument 500 "server is down."
or
ErrorDocument 500 C:\docroot\error_500.htmlHope this helps
Greetings
-
I bought a Surface Pro 3 and 6 of Lightroom. When I tried to load the program with my external hard drive, I got a message saying "the volume for a file has been modified externally so that the opened file is no longer valid.". I followed the instructions and have my serial number, but just can't get the program to load. Download it from the website?
Hi Mcc82884,
I hope that you have installed on your Surface Pro Lightroom 3, but, just in case you're still looking for download help, check out the links and instructions here: How to download, install and activate Adobe applications.
Best,
Del
-
My server is mail.btinternet.com
Whenever I connect to receive e-mails my Inbox receives multiple copies of my new posts and also emails as soon as I read and often deleted.
If you use Windows Mail in Vista, then try to compact and repair the database (see www.oehelp.com/WMUtil/) and also be aware of the risk of interference antivirus (see www.oehelp.com/OETips.aspx#3). If this does not help, see if you can login via webmail and see if you have the same problems here. It could be that there is a message that hangs the server and you can delete this message to get rid of it via webmail. You can also contact btinternet.
If you do not use Windows Mail in Vista, then you must specify what software you use to access your e-mail.
Steve
-
DeskJet 5610: 5610 Deskjet driver came out prematurelly without error message
I was running aio_cdb_nonnet_full_win_ww_130_141.exe downloaded from the HP web site.
But at half way through the installation itself abandoned without error message.
He came out after I clicked on accept and continue.
Hello
Follow the installation once more until you reach the EULA screen, then click on the 2nd link (the use of Internet connection settings).
Select No, thank you for all the options and confirm the license agreement.
The additional installation and check for the difference.
Shlomi
-
Two days ago, I try to run cyberlink downloader to install the latest update for power dvd (compatible with win 8) .but every time appear the error message: visual c ++ run time time library sleeves application error - the requested to terminate it in an unusual way.what can do? I have the problem with the update.the only specific support has me unistal all visual c ++ redistributable, reinstall program.but had tried the remain.i problem and the security mode.any solution please? I have win 7 x 64
Hello
You can get this error because of things:
- The Visual C++ library runtime components are missing. (You should of reinstalled after remove them because this software requires their)
- A problem with this software, it is possible a conflict with another software.
If the problem is caused by #1, you can reinstall the latest version of the Visual C++ Library Runtime components and see if it solves the problem, but I do not know what version of the redistributable software requires.
Package redistributable Microsoft Visual C++ 2010 (x 64)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632
There is also a 2012 version of the Redistributable:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=30679
-
OXC0000428 error message at startup
Original title: OXC0000428
My laptop keeps giving me this message: oxc0000428. I can't for a repair on the laptop and start it later, but if I reboot, I get the error message sometimes 4 - 5 times before it goes to start the repair. It is said somethig of a digital file is not wrong, but I can't seem to fix it. Any ideas?
Hello
· What is the full error message?
· You did it last changes before the show?
Method 1: Try to start the computer using the last good known Configuration and check if you can successfully start.
Using the last good known Configuration
http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration
Method 2: I will suggest you to do material clean boot and check to see if you encounter the same problem.
a. right-click on computer-> Manage
b. Hardware tab Device Manager->
c. right click the sound card, video card and NIC, one by one, and then click on turn off
d. restart the computer. If the problem is resolved, you can then enable the devices one by one to find the exact mechanism causing the problem
After you find the device that is causing the problem you can solve by installing the latest driver or replacement of the unit.
Method 3: Check a drive for errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
Important: If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.
Method 4:
Also try to manually run the memory diagnostic tool and check if it helps.
Diagnosing memory problems on your computer
http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer
Hope this information is useful.
-
My Officejet Pro 8000 A809 do not print, but there is no error message
When I try to print on my Hp Officejet Pro 8000 from my Windows 7 laptop wireless, the laptop is of the view that printing took place. I get no error message. But nothing comes out of the printer. Sometimes this small error on the printer flashes, but because the laptop thinks everything is fine, I can't understand why. I've run the troubleshooter, who says he has no problems, and rebooted the printer and the computer more than once as well. My printer (HP Officejet 6500 a) wireless works fine. Does anyone have a suggestion?
Thank you for your help.
Kat
Thank you for you a message. My printer worked fine with my Windows 7 laptop as I upgraded from Vista in May. This the first time this problem has occurred. I have change a color ink cartridge in the morning that it has stopped working. But, he continued to work for about 3 hours after the replacement of the cartridge, so I don't really think that's the problem.
One of the tools of diagnosis HP can help: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3760410#N686
-
Satellite C650 - error message at start up - GeFIF89ay not found
This message appears whenever I start Toshiba C650 "the procedure entry that gefif89ay point could not be located in the dynamic link library kernel32.dll. Help, please
Hello
I see this error message for the first time and research using t n GeFIF89a a lot.
I didn t find any success about the GeFIF89a.But I could find a few hits searching the + procedure entry point could not be located in dynamic link library kernel32.dll +
In many cases, people have said that Windows update has solved this problem
Check it!PS: I also recommend the system using the CCleaner, this small tool helps you clean many registry problems.
Maybe you are looking for
-
Many problems with the Camileo X 100
I have a Camileo X 100 (nice and fantastic image quality) and the files are not edit from any conversion or editing software, I tried several times with all software codecMy PC configuration is: Win VISTA Home Premium SP2 32 bits, ACER 9420 17 ", Int
-
How can I restore my download folder to the dock in El Capitan?
I've deleted the folder downloads of my dock and want to restore it. Can you help me? My MacBook Pro retina early 2015 is running El Capitan OS X 10.11 I tried move the icon to my homepage but done dock is unwilling to accept it, even wen put in the
-
Equium U400 taken from the United Kingdom for US - need a compatible AC cable
First of all... WARNING drunken muppet, I'm rubbish with technology so forgive me for any stupid statement, please? Okay, so I what I * think * is an Equium U-400 - it definitely says Equium on top, so I can be pretty certain about it. I turned it up
-
is it possible to change/upgrade GPU - Quadro K2100M of GTX 980 M in ws laptop Lenovo "ThinkPad W541' (20EFCTO1WW)? I like the laptop, but the GPU portion is not for pc games, so iwould like to know weather is it physically possible to change this Qu
-
J053ea HP Envy 17 - using the touchpad and keyboard simultaneously
I just bought the laptop of HP Envy 17 in Windows 8. One problem I have is when running games such as Call of Duty, I need to be able to use the touchpad with the keyboard to control the game properly. It seems that, once I have a key that is presse