Error message "no additional applications designed for your device were found".
Let me google that for you:
http://CrackBerry.com/no-additional-applications-designed-your-device-were-found
You can load applications using javaloader, for example. See the developer's guide for a list of all the possibilities.
Tags: BlackBerry Developers
Similar Questions
-
I have a new BlackBerry 8900. Whenever I try to add 3rd party software, I get the error message "no additional applications for your device were found". Tried loading MSDict English-French dictionary.
I was using Desktop Manager 4.7, then tried 4.5, both without success. Can anyone help?
Thank you.
Do you use your handheld in a corporate network?
-
Additional applications of blackBerry Smartphones No. designed for your device found
Hello
I get the, msg "no additional applications designed for your device not found" when trying to install new software via my Desktop Manager. I read a thread that says I have to install BlackBerry software for the current device. It seemed to work for the individual with the question.
The post office is: http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&message.id=...
Well, I would like to download the software for mine, but my carrier/provider don't showup on the BlackBerry site. My carrier is AlaskaDigitel. Is there some generic download that I could use? My Office Manager can show what software is installed on my device, like Google Maps, etc.. He simply refuses to install the software. The things I installed were facilities OTA.
Here is a little info that can help you to understand what I see:
I have a BB 8130 Pearl
v4.3.0.127 (Platform 3.1.0.73)I think that there is something wrong & I just don't recognize the simple fix for it. Could someone help me?.
I opened the Desktop Manager, click on the Office Manager & watch the
Tab 'general '.
BB Desktop manager: 4.3.0.15"Components" tab
BBDevice Manager: 4.3.0.7
BBDevMgr: 4.0.0.1
RIM USB driver: 4.0.0.2
RIM USB Serial Driver: 2.1.0.4
Application loader: 4.3.0.13
RIMProgram: 1.0.1.35There is nothing in the tab "Device Software"<=Is this="" the="">=Is>
Everything "Looks" right to me, but I am very, very new to this.
Thank you
~ RoystreetYes, that's the problem. You need the OS installed on the computer (so it will show in the tab of the device software) in order to get rid of this error. You can use any OS for your device model, regardless of the carrier.
Use the link below to find a carrier CDMA which offers the 8130 and has a download for 4.3.0.127. Download it, install it on your computer. Then go into c:\program files Research in motion\apploader and delete the file named "vendor.xml." This file prevents the installation of your device carrier operating systems. Deleting the file will allow DM recognize as valid for your device. It does nothing else, so it is safe to delete. Once you have deleted the vendor.xml file reconnect the device to the PC and launch the Desktop Manager/Application Loader. You should be good to go.
http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
-
The error message also indicates: "cannot complete the assessment. The assessment or other operation did not complete successfully. This is due to an error reported from the operating system, driver or any other element. »
I did a full install new (custom) on two WD Raptors (10,00 RPM) RAID 0 (striped). All used harware succeeded in Vista Ultimate o/s is first available. Current material as follows:
Windows 7 Professional 64 bit Build 7600 v6.1.7600
EVGA nVidia nForce 780i SLI card mother ATX
Intel Core 2 Extreme QX9650 processor
8 GB (4x2Go) Patriot Extreme Performance Viper Series DDR2 PC2-6400 low latency memory twin Kit, SLI-Ready (with CL Timings of 4-4-4-12 @ 2.1V)
2 x WD 150 GB 10 K rpm 16 MB SATA NCQ in RAID 0 (striped)
Samsung 22 x DVDRW SATA Lightscribe
750TX (750 watts) Corsair power supply
2 x OC from BFG GeForce 8800GTS 512 MB GDDR3 video cards in SLI
Map its Creative SB X - Fi XtremeGamerAll PC settings are standard (ie: no overclocking component) and all windows updates are completed. Latest drivers installed for the video & sound cards. Last firmware & driver for optical drive installed also.
Any ideas as to why I can't receive a rating system for Windows Experience Index with success? Thank you
Stuart
OK, I was on the phone with support for about an hour. Problem has been resolved. Turn user account control either the lower or penultimate level. This version fixes the problem! -
I can't extract the zip files; I get an error message that says: "Application not found". When I check help & press the Start button, it tells how to do it. I thought a program to automatically extract compressed files came with Vista.
Hello
1. you use the functionality of Windows Vista to unzip file or third party software?
2. have you done any software or hardware changes on your computer before this problem?
To work with this problem, see the following methods.
Method 1:
Scan of the SFC
Refer to this article for more information on how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7.
http://support.Microsoft.com/kb/929833
View the results of the analysis.
Method 2:
Run the fixit from following link.
Difficulty of broken desktop shortcuts and common system maintenance tasks
http://support.Microsoft.com/mats/system_maintenance_for_windows/en-usIn addition, I suggest you to check if the .zip file has been associated with a particular program in the section default programs.
http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default
Check if it helps.
-
The following message please just explain?-Windows found driver software for your device, but encountered an error so that to install it. - is - Intel(r) 82566DC Gigabit Network Connection - then he says:-this device cannot start. (Code 10) What this means and how it effects the operation of the computer?-under material network compatible two adapters are mentioned-1. Intel(r) 82566DC Gigabit Network Connection (intel) and 2. Intel(r) 82566DC Gigabit Network Connection(Microsoft)
Hi Mohan kumar,
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest you try the steps in the Microsoft Knowledge Base article mentioned below for you receive the error message:
Windows found driver software for your device but encountered an error trying to install it. Setting is incorrect.
http://support.Microsoft.com/kb/940267
Method 2: You can also view the article in the Microsoft Knowledge Base for instructions on fixing the code 10 error messages:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104
Let us know if that helps.
-
So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get. Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.
Well, I found the solution, just in case anyone has the same problem. Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.
-
There was a problem creating the destination folder. If please check the permission of folder or choose a different folder. What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!
This means that the folder you want to create is blocked because of file permissions. The drive or folder you are trying to create the destination folder is set to read-only, and your username does not have write permissions.
-
Used my copy of OSX MAvericks in the past, but now I get an error message that the application cannot be verified and go to the App Store. I did, but there is nothing to install OSX Mavericks download?
Log in to the App Store and look under the purchases tab.
-
I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.
Hi stickman397,
This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:
http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533
Kind regards
Imran M
Microsoft technical support
-
When I start my computer, I get and Error Message (InfoCenter.exe - Application error) that someone knows what this means and why I make it?
Hello
Follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same error occurs:
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=trueMethod 2:
I suggest you try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/310353NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.
Check if that helps.
-
I closed my computer and he says there are a few updates that should be installed in front of him close. I let it run and my computer off. Now, when I turn it back on I get the following error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb. And now I can't get my computer to connect to a wired or wireless internet connection, and it seems to be running slow. Any ideas what it is or how to fix it?
Also, I tried to restore my computer to a few days ago and running my software virus and nothing is changed.
Hello
Have updates you installed? You can check this in the history of the update?
Step 1: To check the update history, follow these steps:
1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.Step 2: Refer the article that could help you solve this problem.
You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box
http://support.Microsoft.com/kb/927385 -
Original title: Windows encountered a problem installing the software driver for your device...
Arrrrgh! Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.
I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "
The job of printer/copier/fax end but not go on the scanner.
I tried the 'fixes' to epson.com repeatedly with no luck. This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.
I ran the program to 'fix' Microsoft ATS with no luck. It has detected the error and said that the problem has been resolved, but guess what? No, it isn't.
I clicked on install update driver/driver from Device Manager.
I tried the work around, eliminating the "LowerFilters" of the registry. Guess what? You have it, no luck.
So, before I go and buy a new printer/scanner, with no guarantee that they will work. Does anyone have another suggestion?
I am running Vista, 32-bit.
You can also try and replace or install the ntprint.inf file.
I had a similar problem on a Windows 7 PC and noticed that this file was not present. I just copied the file from a different PC Win7. The printer, I tried to install was a Brother MFC-J410w.
The file can be found here C:\Windows\inf
Hope this helps someone.
-
Original title: 802.11n network adapter keeps dropping out
My network card, Ralink 802.11n for Windows 7 Professional 64-bit, continues to stall as I have no connection to any network. When I check the network card, he said, "no drivers are installed for this device." If I try to update the driver, it indicates that the drivers are up to date. The only way to get the device working properly is to shut down the laptop and restart. When I do this the device manager says that the network card is working properly. I looked at other solutions, but none of them seem quite fit. I use a HP probook 4320 s laptop and I recently installed a I have to drive with the Windows 7 software pre-installed on the drive.
Hello
According to the description, I understand in your computer continues network to drop out of school and gives the error that "no drivers are installed for this device. I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.
This problem may occur because of corruption in the network driver or the network driver is not properly installed in your computer.
Please follow the troubleshooting mentioned method below to check if his help.
Method 1: run the network troubleshooter utility.
The problem report contains one or more event logs. Administrators Network and technical support staff can use the information in the event logs to analyze connectivity problems or help interpret the findings. You can find this information by clicking on display of detailed information on the last page of the troubleshooting tool, or by following these steps:
- Open troubleshooting by clicking the Start button, on Panel configuration, and then, under system and security, clicking on find and fix problems.
- In the left pane, click View history.
- Right click on the troubleshooting report, and then click details.
If the problem persists, follow the next method.
Method 2: uninstall and reinstall the network driver.
Please follow the steps below.
- Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In Device Manager, look for the network adapter.
- Right-click on the adapter and select uninstall.
- After uninstalling the network driver restart the driver.
After the computer restarts, Windows will automatically try to install the driver real network. If not, I recommend you download the latest driver available from the manufacturer's Web site and check if its help.
Please follow the below link to download the driver from the manufacturer websites (HP) network.
http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4145372&swLangOid=8&swEnvOid=4059
Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.
-
Windows found driver software for your device but encountered an error trying to install it.
Original title: USB AUDIO Device
Hi, I tried to install a USB AUDIO device, but I discovered that there is no audio output. And while I try to update the driver, I found an error "Windows found a driver software for your device but encountered an error while trying to install it., USB, the system AUDIO DEVICE cannot find the specified file. I m using Windows 7 64 bit computer laptop, is there a way to fix this? real emergency...
Hi monopolystar,
Try to download the Audio driver manually from the following Web site and the Coachman:If you want to update BIOS drivers I suggest you to contact Acer for further assistanceHope this information helps.
Maybe you are looking for
-
Firefox asked me if I wanted to update the modules and I said yes... then she was update he said and then Firefox said I had to update browser, then I tried to update the browser and Firefox says it's up-to-date. I don't understand... Please advise?
-
iPhone not appearing is not in the 'device list '.
Hello I have several products Mac (iPad, MB Air, Mac Mini and iPhone), they are all connected to iCloud, but my iPhone appears in the list of devices on any of my other devices. On my iPad, for example, I can see the iPad, the MB Air & the Mini but n
-
Player arrested combo recoginising recordable media
Have a problem with the SD-r2212 starnge in my notebook. Worked fine, then one day went to write from XP (SP2) and accepted the "write" command, but when it came to actual writing does not recognize blank DVDs bed CD - r and CD ok. Others from the sa
-
"this is not a bootable floppy please insert a bootable floppy disk and press a key to try again"
formatted a hard drive now im trying to intall xp when I boot the computer with the cd inside its gives me "is not a bootable floppy please insert a bootable floppy disk and press a key to try again. its an IBM machine, connections saved on the hard
-
SDCZ73 of Flair Ultra USB 32 GB / 64GB 3.0 - write Speeed only 25 MB/s
I just bought usb 32 GB and 64 GB flair ultra cz73I checked and read the writing on USB 3.0 speed (pilot enough course)And good reading speed 130 MB / s - 145 MB / sBut the writing speed is quite bad. 10 seconds from 60-80 MB / s and quickly falling