Error message saying that some files are missing when loading Web site
Recently, whenever I've updated my file of Muse and then exported and then downloaded via SFTP on my server, my pages Web load slowly and the browser opens with two error messages. A message says files are missing, and the second is a JavaScript error. When I FTP the files, I have all the FTP so I don't know why I keep seeing these two error messages. This happens on Chrome, FireFox, and Safari (haven't tested in IE).
I managed to get a screenshot on Safari, but his error message is not as detailed as the Chrome.
Here are the perforated cap of Safari:
Can someone give me advice on what is the problem?
My site is: www.goodseed.com.
Thank you.
Amos
Thank you for helping me check on this issue. I spent the better part of two weeks racking my brains out on what was the cause of the error message. According to me, what it boiled down to a faulty firewall on the server of our hosting provider. He was blocking the movement of our own office, causing the site to not load completely. Since my webhost has adjusted the firewall settings and the site load very well now. It turns out that the problem began minutes after we downloaded news that we had designed in Muse. So, our first thought was that we had damaged our Muse file somehow. But thank God it was a firewall issue instead.
Nitin and Zak thanks for your help.
Tags: Adobe Muse
Similar Questions
-
I have uninstalled or deleted my Windows XP Pro VDMDBG.dll because I received error messages after
I am now using the same IDE on this DIY PC like what I used to have XP Pro running. I ran an upgrade or r disc install to resign the drivers and at the same time you run some programs to uninstall some of the OLD drivers of the motherboard and temporary files, but I must have too deep because now, I have only this error message telling me that a .dll file is missing when I try to acess Mngr.vdmdbg task was not found. Reinstalling the application may fix this problem. Where can I go to download or difficulty this annoyance file or program? Thankx again! -AlSounds messy.
If you see a message like this:
Taskmgr.exe - Unable to locate component
This application has failed to start because VDMDBG.dll is not found. Reinstalling the application may fix this problem.I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).
You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):
c:\Windows\System32
c:\Windows\System32\dllcache (this is where XP keeps backups of important files).Here is the link to my SkyDrive and you can get the file you need here:
http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.
When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.
You can download the file without the extension, and then rename the file to add the appropriate extension. You do not want to use a file called vdmdbg when the name of the file should really be called vdmdbg.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.
You then put the downloaded files in the correct folders on your system.
PS Microsoft support engineers - "try running sfc/scannow and check if it helps" will not replace the missing vdmdbg.dll file because it is not what sfc/scannow does. If you want to see an experiment to prove that, let me know because I have a ready-made.
-
I installed Win7 using a .wim that I used successfully several times before. The .wim is on my USB and the computer is not connected to the network. Using a disk to start Windows PE and imagex, I applied the image. When Windows 7 was started for the first time and prompted me to a computer name, I entered a name with only lower and upper case characters. An error message told me that some characters that I had used were not valid and listed the characters not valid, which I had used.
What is my next course of action?
I did a hard reboot and Windows later accepted my computer name.
This has been resolved.
-
Satellite A100: some files are missing when copying DVD on the desktop
Hello
Suppose I have 1000 files on a DVD.
I drag all these files in the desktop, all of a sudden I see this is 920 files.
If some files are missing.What this may be?
There are no errors. I don't think that something is wrong.
I initially thought maybe hidden files are counted in the DVD, but not on the desktop?
Maybe something on the desktop?Anyone have any ideas? I tried to put it on 'To see the hidden files' - it's a Toshiba A100.
I just ran a scan antivirus on this file and it let's say 1500 files analyzed.
Haha. Antivirus but probably scanned all etc. desktop.ini and Thumbs.db.
.. And maybe Windows Vista now have those when you want to display the number of files? -
Because this message "may be that some files are missing or wrong server.
for me this message "may be missing some files on the server or incorrectly muse adobe" share the message
MuseJSAssert: Error calling function selector: TypeError: 'undefined' is not a function
Hello
Take a look at this topic, see if you get something usefil
-
I have synced my creative files could (trial versions) on my Apple MacBook Pro laptop. I constantly get an error message that says, "some files could not be synchronized." I'm at 2 GB of capacity. What now?
Links for synchronization of files that can help
-https://forums.adobe.com/community/creative_cloud/host_sync
-http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
-http://helpx.adobe.com/creative-cloud/kb/cannot-share-certain-types-files.html
-Size limits https://forums.adobe.com/thread/1488242
-
I get the error message saying that your files cannot be downloaded
Why?
Hey jims12484247,
Please see this link because it might help:
Kind regards
Ana Maria
-
When I try to open firefox, the firefox message is already running on this computer I had a few times in the past, but it has become more common recently. I know that the application is not running. Thus, the only cure is to restart my computer then it's ok.
hoping someone can help kind regards Paul
Probably a process firefox.exe "hung."
-
I'm the Director, I created a video with music and when I go to publish on a dvd, the error message says that the file is missing please help
OK you have imported the various source files into Movie Maker...
Photos, Video / Audio clips.Are all these files still saved on your hard drive? The
Only project files the path to the files that is they don't
moved, deleted or are not available in other program
cannot continue. -
Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all
Maybe the info will offer something that you haven't tried:
First, launch... Task Manager...
How to launch the Task Manager instantly in Windows XP or Vista?
http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-VistaThe Task Manager / processes tab select (highlight) any which instance of:
"wmplayer.exe" and left click on the button "complete the process".If you see a dialog box 'Warning'... left click Yes.
Close the Task Manager.
Try Windows Media Player again.
And... the following links may be worth a visit:
(925704) when I try to use Windows Media Player 11, the program
does not start, or some user interface elements are empty
http://support.Microsoft.com/kb/925704Please see the following article for info on opening a high command
Prompt in VistaWindows Vista - command prompt: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
(scroll down to: how to run a command with elevated privileges?)Good luck...
-
Original title: dll error
most of the time when I try to install a game on my pc. After I get the error message indicating that a file xxxxx.dll is missing, once again if I install this file another yyyyy.dll file is missing out of her Dungeon on entry
Hi Prakash,
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:1. What is the error message that is accurate or complete?
2. have you made any recent hardware or exchange of software on your computer before the show?3. what game you are trying to install?Please follow the methods and mark the question below:Method 1:You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: You must follow the step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.Method 2:I suggest you to refer to the link below to use the (SFC) System File Checker tool to troubleshoot missing or corrupted system files in Windows:How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7Method 3:Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:
http://www.microsoftsafetyscanner.com/Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.Method 4:Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
a. click Start.
(b) in the search box type eventvwr.msc , and then press enter.
c. now, click Application in the observer of events (local).
d. now, looking for event log on the right side of the event viewer window.Reference:
Open Event Viewer:http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
What are the information contained in the logs of the event (Event Viewer)? :I hope that the information above helps you. -
Outlook Express 6
Hello
Recently, if I send a big PDF file via outlook, after attempting to send the files, I get an error message saying that the mail has not been sent. The files remain in the Outbox, but when I check with the recipient, they confirm that they have received the mail! This has only recently begun to happen. Any suggestions? Thank youCheck: File | Work offline and in: reviews | Layout: uncheck the preview pane. Open the Outbox and delete the message.If that does not create a new box of sent, and sent items.Follow these steps for the Outbox and sent items after you move the messages you want to save to a local folder that you create.Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.With OE closed, find the Outbox.dbx and Sent Items.dbx file and remove them. New files will be created automatically when you open OE. -
Whenever I boot Windows XP (fully updated), I get a message saying that 'wasuoba.dll' is missing. I can't find any information what so ever on this .dll file any where. Help, please!
As I said, my Windows XP is fully updated. I get this error for a while now, so not sure what has caused it and when I started to do.
In general, I was ignorant, but recently my PC feels like it becomes less stable.I'm surprised that it returns no results on any search engine.
Whenever I boot Windows XP (fully updated), I get a message saying that 'wasuoba.dll' is missing. I can't find any information what so ever on this .dll file any where. Help, please!
As I said, my Windows XP is fully updated. I get this error for a while now, so not sure what has caused it and when I started to do.
In general, I was ignorant, but recently my PC feels like it becomes less stable.I'm surprised that it returns no results on any search engine.
Assuming that your spelling is correct, your computer is probably infected by malicious software. Download, update and perform a quick scan with Malwarebytes.
-
Original title: my computer is corrupt and needs fixing!
I received calls from a person in India who said that they are Windows services centre telling me that they have received the error message saying that my computer is damaged, and they want to help me. But I have not received any error message on my screen. When I asked them how they got my number they said it's from the database of Windows. The number they gave me is 02921252715 and when I called the number of the person on the other end told me that they are a company called Windows e-solution, independent company and is not attached to Microsoft Windows. What should I do? Are these authentic calls and approved by Microsoft Windows?
Hello
Its a SCAM!
Avoid scams to phone for tech support
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspxIn the United States, you can contact the FBI, Attorney general, the police authorities and consumer
Watch groups. Arm yourself with knowledge.No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
computer. So that's the fraud or scams to get your money or worse to steal your identity.Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
phone calls to help you fix your computer
http://www.Microsoft.com/protect/fraud/phishing/msName.aspxScams and hoaxes
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3Microsoft Support Center consumer
https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1Microsoft technical support
http://support.Microsoft.com/contactus/?ws=support#TAB0Microsoft - contact technical support
http://Windows.Microsoft.com/en-us/Windows/help/contact-supportI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
original title: error 0 x 80070021
I'm trying to backup to an external drive my contact Outlook .pst files. I get an error code
Beef 80070021 which says that the files are either locked by another program. I just put all these contacts on iPhone. What should I do to fix this?This problem is caused by a MS Outlook Add In which prevents closing Outlook. Add in that is usually responsible for cauysing this problem is one that search/indexing of the tool. The remedy is very simple:
(i) with Outlook open, go to Tools Menu(ii) click on "Trust Center".(iii) in the left pane, choose Add-Inns, and then near the lower part of the window, you will see a button that allows you to manage your COM Add-Ins."(iv) to ensure that the drop-down list is set to ' COM Add-Ins" and then click on OK(v) select Windows 'Search Email an indexer' and then click 'remove '.(vi) click OK, and then close Outlook.(vii) re - open Outlook and run the backup. (The program will tell you that Outlook must close the first before saving). Everything should be OK.If any problem contact me at * address email is removed from the privacy *.I hope this helps.
Maybe you are looking for
-
Display went horizontal on me!
Something suddenly spun my screen all 90 degrees to the right! I turned off and restart and it's back on the side! Can't seem to find a way to return to normal! I developed a stiff neck! Any help out there for me?
-
code error 80070490 cannot get rid to ensure my security updates will be down?
error code 80070490
-
Parameters to win 8 and SSD drive
Just bought a h9 - 1440t with windows 8 pro and an SSD. Can you tell me: 1 - is the motherboard SATA 2 or SATA 3? 2. are there additional parameters I should do to ensure the best performance of the SSD drive? I was led to believe that I had to disab
-
Windows Media Player-random mode
Windows media player I like to listen to my media player in shuffle mode, but he often plays a lot of the same songs. many songs have not yet been picked yet. Is there a setting so it takes songs completely random?
-
I use Windows Vista and an HP Officejet 6600. I have IT connected wireless and am able to print everything but when I'm on IE and want to print a page I can't. I get an error asking to run a script and when I answer Yes, nothing happens. I am also un