error message when you open the windows mail

Similar Questions

• Get the "pcwum.dll is missing" error message when you open the Task Manager

  Original title: Windows 7 64-bit: task manager and windows update does not work, amd update failed to load detectionprogramm and crashes from time to time

  Sometimes, when I try to open the windows task manager it says: "Het programma kan niet worden gestart omdat pcwum.dll Land op uw computer. ' U * says clean mogelijk oplossen door het programma opnieuw you installeren. Basically, he says pcwum.dll is missing on my computer and I can fix it by reinstalling the program. As it is I can't reinstall the Task Manager. Also, when I try to check for Windows updates, it does not work because it says: "uh" momenteel niet naar "kan updates gezocht worden, omdat Windows Update-service niet actief is. U moet uw computer opnieuw opstarten mogelijk. "translated: you can not search for updates now, because the Windows Update service is not active." You may have to restart your computer. It says this all the time so I will have this since June have not updated since then. When I try to update my AMD updater it says there is a new version available, I now 12.6 and 12.8 update. Can I download and extract, but whenever I try to install it it says it can't find the driver detection program. I have an AMD ATI - Radeon 5700. My computer crashes now and then. I get the famous blue screen, who said he had a problem with a driver (probably one of my graphics card) and needs to restart. When it restarts I have first option starting in safe mode, but I can't update my drivers in safe mode so that didn't help out me. Please help me, I'm having this problem for a few months now, and it gets really annoying.

  Hello HenkVB,

  Thank you for the question!

  It is disheartening to know that have problems you with the the Task Manager, Windows Update and blue screen.

  Question: Pcwum.dll missing everything by opening the Task Manager.

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Question: looking for a Windows Update.

  Run the troubleshooter and check if that helps.

  Open the Windows Update troubleshooting tool

  Question: Blue screen

  Perform the steps in the link and check.

  Resolve stop (blue screen) error in Windows 7

  Meet us if you face any problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Error message when you open the project.

  Hello

  I get an error message when I try to open a project in which I worked on these last two weeks.

  It looks like this:

  

  Some tips on how to run again, or am I screwed?

  I tried to restart Captivate and the computer. The file is not an attachment and I worked on it every day the past few weeks, worked very well. Available disk space is still left, so shouldn't be a problem either.

  Any help is appreciated.

  Kind regards

  Patrik

  I was referring to the preferred option in Captivate to create backup files.  Have you had this market?

  

  Working on a LAN on any project file Captivate is not recommended because a glitch in the network traffic for a backup action can damage your project file.  Maybe it's actually what happened in your case.

  When you say "only saving the file on my hard drive" do you mean that you have saved the project file on your hard drive before you open it whenever you work on it?  If so, it is strongly recommended.

  Look to see if you have a backup of your file version (look in the same location as the project file and see if you have another file it is about the same size with the same name but the backup on the end).

  Is there is no backup file and then you can restore the project using the cache of Captivate files.

  See this link for instructions on how to do it:

  http://blogs.Adobe.com/Captivate/2010/09/recovering-the-project.html

• Why do I get an error message when you use the windows installer?

  OK, I am trying to install the Chipset drivers using windows install. I go to the gigabyte website and download the drivers from the chipset support and downloads. I go in the config file and click on the chipset of windows file install. It gives me the error "this installation package could not be opened. Contact the application vendor to verify that this is a valid installer package. "I made sure I got the download of the good mother Rev. and the right windows (x 64) option. IM at my wits end. I've asked this question before but cannot get a straight answer from anyone.  He has this annoying 1 cm around my screen black line. This isn't my moniter and it isn't my video drivers. IV update of windows. The only other option is my chipset. Any suggestions on how to work around this error?

  PS - I recently wiped my hard drive with Dban. If this would have anything to do with that.
  CPU: fx 8150 3.6 ghz

  MB: GA-990fxa-ud3 rev.3

  GPU: EVGA GTX 670 ftw

  RAM: Skill G 16 GB Ripjaws

  PSU: Corsair Tx 750

  OS: Windows 7 x 64 service pack 1
  Hardrives - 120 GB samsung ssd
  Western digital 1 TB

  Hi Ricky,.

  ·         You are able to install programs and drivers?

  ·         What is the motherboard Chipset Drivers file extension?

  You may experience this problem if the installer has downloaded file is corrupted. Follow these methods and check if that helps:

  Method 1:

  I suggest to download the drivers to a different location on the computer and see if you can install it from there. I suggest you to install the driver Chipset in high Mode and check if it installs.

   

  http://www.gigabyte.com/products/product-page.aspx?pid=4397#DL

  Method 2:

  Try to update your BIOS and then install the motherboard chipset drivers and all other available device drivers check if you get the error message.

  http://Windows.Microsoft.com/en-in/Windows7/BIOS-frequently-asked-questions

  Warning: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information helps. Let us now if you would like more support on Windows.

• DeskJet 3520: 0xB3F1A01C Error Message When you open the printer

  I add the 0x83C00009 error message. But I was able to remove the cartridge and now it has changed to 0xB3F1A01C

  A google search gives no results.

  The power supply for flash button. The inside of the printer will move anything, it's dead.

  What does this error means?

  Hi @Zurd,

  Thank you for visiting the Forums from the HP Support! I understand that you get an error message on your HP Deskjet 3520.

  I would like you to start troubleshooting here: "Problem with print head", "printer failure,' 'Ink system failure', or"0 x."r"C2. "... "Error m...

  «Because there are many variations of these "problem with print head", "Printer failure," or error messages 'Ink system failure' and alphanumeric codes, we have provided guided a few steps to help you troubleshooting document for your mistake right.» Select the statement that best fits your situation. »

  I hope this helps, if you still get the error message, please contact our technical support at www.hp.com/contacthp/. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• Error message when I open the Bluetooth Manager

  I get the following error message when I open the Bluetooth Manager: "cannot open the device Bluetooth ACPI (tosfrec.sys) driver. What I am doing wrong? How can I get past this point?

  Your machine has Bluetooth card installed? Is it installed correctly?

• "File not found" error message when you save the document

  Hello

  Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found".  I have to click on 'ok' and the document is not saved.  I tried to register differently in previous versions, and it still does not work.  I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk

  Why would he try to find a file?  Looks like an error message when you try to open a doc, does not save a doc.

  Help, please!  I can't stop my station until I get the document to save.

  Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);

  Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).

• Error message when you install the first elements 10 on my PC

  I bought the Pack Adobe Photoshop Elements 10 and Adobe Premiere Elements 10... and when trying to install, have successfully installed Adobe Photoshop Elements 10, but get an error message when you try to install the first Elements 10.  The Error Message reads as follows:

  This installation package is not supported by this processor type.  Contact your product vendor.

  Now that?  I don't know what to do from here.

  Could you please someone get back to me?  Thank you

  Hello

  Disc 1 contains the installer for 32-bit Windows.

  Disc 2 contains the installer for Windows 7 64-bit.

  Disc 3 contains the installer for mac OS.

  Disc 4 is the content of the disc for Windows Adobe Premiere Elements.

  Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.

  You can install from Disc1, 2 or 3 depending on the operating system running on your computer.

  Thank you

• I get this new error message when you change the properties of generation for an installer in LV2011sp1. - anyone know what it is?

  I built this front Installer. But I think that this is the first time since the upgrade to SP1. Now when I look at just the proerties for Installer build (I have yet to change), I get this error message when I hit the OK button.

  If I select No., it just stops. If I select YES, it seems to go ok. But I have not tried to build a new installer again.

  Anyone know what it is?

  Photo of the message is attached.

  I find it always useful to publish at least part of the error in your post, while others in the future may seek and find the answer.

  I think that you will be able to correct the error by clicking on the option of additional installers on the left pane, and then click OK to save the build.

  You probably asked to point the installer on some files that were missing since the upgrade.  I think that this occurs when the version of something on your computer changes, but the installer doesn't seem to know other installers until you visit the dialog box.  It would be brutal trying to replicate, but I met the same problem before.

• Error message when you open Photoshop-"change logging is disabled.

  Hello

  Adobe Photoshop CS seems OK, but when it's open, I get the following error message: "unable to open the log file edition coastline_detailed. Change recording is disabled. »

  Can someone advise me on how to get rid of this message? Thanks in advance,

  Janice Cook

  Open Photoshop and editing - Preferences - general.

  Note the section of history down the log.  What to put there?  Is it possible, that he is set to maintain a log of changes to a file in a folder that no longer exists?

  -Christmas

• Receive error message when you open Outlook; the path specified for the file G:\outlook...pst is not valid.

  I recently exported my outlook to a pst file and saved on my external hard drive.  Since then I get this message when I open Outlook "the path specified for the file G:\outlook...pst is not valid.  How to stop?

  NEVER use the. Functions of export/import PST in Outlook.  They are broken, have been for some time, data loss and often corrupt Outlook profile in use. To perform a backup, just close Outlook and make a COPY of the. PST file.  Looks like (and I guess here) your external HD is G:\. This being the case, that. PST file is probably still attached to Outlook and Outlook can't find it.  With Outlook open, see the supplement files pane. PST file, right-click, and then click "close".  You may need to have the hard drive external and exported. File PST attached and available for work.  If this does not work, you have damaged your profile and will need to make a new one:

  How to create and configure an e-mail profile in Outlook 2007 and in Outlook 2003

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• "load error" message when you connect to windows vista account___

  When you connect on windows (vista) to my sons account, a window appears with the Dll Run in the upper left corner and a message that says: error loading C:\Users\... it indicates the name of my son, then - Home\AppData\Local\l41DMut.dll.  It does not appear on the admin or any account of my other children. (parent) account.

  I have tried to download a Web filter, but could not.  I wonder if this error message is the problem.  Even if this is not the problem with the download works do not, should not be there.  You can click on the x to close the box (it always appears twice) and then open Mazilla Firefox, etc.

  What is going on?? Can you help me?  Thank you!!

  Google has nothing for it; normally, who points to him being Malware...

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• "Driver not installed successfully", the error message when you use the new MP3 player.

  I recently bought a Sony Mp 3 (model NWZ-E384) Player.

  When I connect the USB I get an error message will appear in the lower right corner on the screen saying "driver not installed successfully.

  Why am I seeing this? Better yet, why am I this problem? My previous Sony Mp3 worked fine with Windows 7.

  Is there a round work to install the device driver on my PC?

  Thank you very much

  Ian

  Don't know if this helps Sony - https://ca.en.kb.sony.com/app/answers/detail/a_id/42390/c/65, 67/p/57784,59687,59925,80740 / (from their support pages for the NWZ-E384 - http://esupport.sony.com/CA/p/model-home.pl?mdl=NWZE384&template_id=1®ion_id=3&tab=howto#/howtoTab ).

• Error message when you use the menu buttons in IE but not chrome

  Hello.

  My recently transferred website has a problem when you use the menu anywhere on the site in Internet Explorer, but not on my mac using chrome? I get this error message came up on top of the screen which takes three clicks to go MuseJSAssert: error calling the function switch: TypeError: object does not support property or method . So, if I click on anything else it pop ups again. Any ideas how to get rid of this? I tried to re - download files from muse, but the same phenomenon occurs. I tried to download the files in a folder of exported frm different muse I saw had worked for someone else on here, but no difference? Any help much appreciated.

  Website: vanletteringco.com

  You might get an error that iPage are sorting when opening too, just remove the /root1 in the address bar to see the site?

  Thank you

  GAV

  Gavin,

  Using Jotforms should ideally create not the questions here. Did you try reseating Jotforms code? I suggest you to get a charge of Jotforms code and then try to insert it to test.

  Kind regards

  Sachin

• Error message when you add the account to TimeMachine

  Hello

  I get the error in system.log when I enter my account information to access a drive for time machine below

  System.log:Feb 14 11:31:04 iMac - 5 K sandboxd [133] ([25623]): kcproxy (25623) political system: deny /Library/Keychains/System.keychain file-writing-untie

  The above error appears when you use access Keychani to run the add-in, when I use the route of the control panel to add I get a slightly different error

  System.log:Feb 14 11:19:12 sandboxd iMac - 5 K [133] ([465]): writeconfig (465) political system: deny /Library/Keychains/System.keychain file-writing-untie

  So it seems to be a sandbox configuration problem?

  Keith

  What functional problem you have, if any? Log messages are not a problem in itself.