DeskJet 3520: 0xB3F1A01C Error Message When you open the printer

Similar Questions

• Error message when you open the project.

  Hello

  I get an error message when I try to open a project in which I worked on these last two weeks.

  It looks like this:

  

  Some tips on how to run again, or am I screwed?

  I tried to restart Captivate and the computer. The file is not an attachment and I worked on it every day the past few weeks, worked very well. Available disk space is still left, so shouldn't be a problem either.

  Any help is appreciated.

  Kind regards

  Patrik

  I was referring to the preferred option in Captivate to create backup files.  Have you had this market?

  

  Working on a LAN on any project file Captivate is not recommended because a glitch in the network traffic for a backup action can damage your project file.  Maybe it's actually what happened in your case.

  When you say "only saving the file on my hard drive" do you mean that you have saved the project file on your hard drive before you open it whenever you work on it?  If so, it is strongly recommended.

  Look to see if you have a backup of your file version (look in the same location as the project file and see if you have another file it is about the same size with the same name but the backup on the end).

  Is there is no backup file and then you can restore the project using the cache of Captivate files.

  See this link for instructions on how to do it:

  http://blogs.Adobe.com/Captivate/2010/09/recovering-the-project.html

• Get the "pcwum.dll is missing" error message when you open the Task Manager

  Original title: Windows 7 64-bit: task manager and windows update does not work, amd update failed to load detectionprogramm and crashes from time to time

  Sometimes, when I try to open the windows task manager it says: "Het programma kan niet worden gestart omdat pcwum.dll Land op uw computer. ' U * says clean mogelijk oplossen door het programma opnieuw you installeren. Basically, he says pcwum.dll is missing on my computer and I can fix it by reinstalling the program. As it is I can't reinstall the Task Manager. Also, when I try to check for Windows updates, it does not work because it says: "uh" momenteel niet naar "kan updates gezocht worden, omdat Windows Update-service niet actief is. U moet uw computer opnieuw opstarten mogelijk. "translated: you can not search for updates now, because the Windows Update service is not active." You may have to restart your computer. It says this all the time so I will have this since June have not updated since then. When I try to update my AMD updater it says there is a new version available, I now 12.6 and 12.8 update. Can I download and extract, but whenever I try to install it it says it can't find the driver detection program. I have an AMD ATI - Radeon 5700. My computer crashes now and then. I get the famous blue screen, who said he had a problem with a driver (probably one of my graphics card) and needs to restart. When it restarts I have first option starting in safe mode, but I can't update my drivers in safe mode so that didn't help out me. Please help me, I'm having this problem for a few months now, and it gets really annoying.

  Hello HenkVB,

  Thank you for the question!

  It is disheartening to know that have problems you with the the Task Manager, Windows Update and blue screen.

  Question: Pcwum.dll missing everything by opening the Task Manager.

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Question: looking for a Windows Update.

  Run the troubleshooter and check if that helps.

  Open the Windows Update troubleshooting tool

  Question: Blue screen

  Perform the steps in the link and check.

  Resolve stop (blue screen) error in Windows 7

  Meet us if you face any problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Error message when you install the printer driver

  First of all, let me tell you that I was searching and tried solutions for ten days, but can not solve the problem.

  My HP P1102w printer is three years old and is connected to my PC via a USB cable. It is not a shared printer. It worked correctly until 10 days ago. Suspecting corruption driver, I downloaded the latest version of the driver on the HP website. When you try to install it, I met with this error message:

  Windows found driver software for your device but encountered an error trying to install it.

  In the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0

  If you know the manufacturer of your device, you can visit their website and check the support.
  My PC OS is Windows 7 Ultimate 64 bit. Let me know what additional information may be required.

  Please sent me useful information.

  Thank you so much.you sent slove my problem how.

  It seems that the problem was due to corrupted driver files that were not replaced when I reloaded the drivers. I was able to solve the problem by deleting the files in the driver manually. I followed the following steps:
  step 1:
  Check out C:\Windows\System32\DriverStore\FileRepository and delete everything that associated the P1102w printer, such as the hp1100.inf_amd64_neutral_56c36f106bed03b4 folder. If I remember correctly, there are two or three similar files that I deleted.
  step 2:
  Then I tried * 1102 on the path c:/windows/system32 and removed from files that have been associated with the P1102W printer.
  step 3:
  I'm not sure that this step is need, or you need to do this step before the other steps. However, in this step, I ran uninstall. exe from the HP driver CD supplied with the printer. After about 10 minutes I forcely closed the uninstall.exe process in Windows Task Manager because the uninstall process seemed to be hung.
  step 4:
  I ran setup.exe from the HP CD supplied with the printer and the printer installed successfully.
  I hope this answer helps anyone with a similar problem.

• error message when you open the windows mail

  Account: "pop.comcast.net (1)', server: 'pop.comcast.net', Protocol: POP3, server response: '-ERR invalid command', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC18

  Account: "pop.comcast.net (1)', server: 'pop.comcast.net', Protocol: POP3, server response: '-ERR invalid command', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC18

  Wrong name of POP3 server.
  Change to mail.comcast.net not pop.comcast.net
  Open Windows Mail > tools > accounts > your comcast account > properties > Server. Make your change it > click OK when finished.

  t-4-2

• Error message when I open the Bluetooth Manager

  I get the following error message when I open the Bluetooth Manager: "cannot open the device Bluetooth ACPI (tosfrec.sys) driver. What I am doing wrong? How can I get past this point?

  Your machine has Bluetooth card installed? Is it installed correctly?

• Error message when you try to print

  I received the following error message when you try to print a document.

  "Spooler subsystem App stopped working and was closed.  Production of Windows warn if the solution is available.

  I have not had any problems with my printer up to today.  How will I be notified by Windows and is there anything else I can do.

  Are you facing this problem when you print using all applications?

  Take a look at:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• Error message when you open Photoshop-"change logging is disabled.

  Hello

  Adobe Photoshop CS seems OK, but when it's open, I get the following error message: "unable to open the log file edition coastline_detailed. Change recording is disabled. »

  Can someone advise me on how to get rid of this message? Thanks in advance,

  Janice Cook

  Open Photoshop and editing - Preferences - general.

  Note the section of history down the log.  What to put there?  Is it possible, that he is set to maintain a log of changes to a file in a folder that no longer exists?

  -Christmas

• "File not found" error message when you save the document

  Hello

  Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found".  I have to click on 'ok' and the document is not saved.  I tried to register differently in previous versions, and it still does not work.  I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk

  Why would he try to find a file?  Looks like an error message when you try to open a doc, does not save a doc.

  Help, please!  I can't stop my station until I get the document to save.

  Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);

  Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).

• I get this new error message when you change the properties of generation for an installer in LV2011sp1. - anyone know what it is?

  I built this front Installer. But I think that this is the first time since the upgrade to SP1. Now when I look at just the proerties for Installer build (I have yet to change), I get this error message when I hit the OK button.

  If I select No., it just stops. If I select YES, it seems to go ok. But I have not tried to build a new installer again.

  Anyone know what it is?

  Photo of the message is attached.

  I find it always useful to publish at least part of the error in your post, while others in the future may seek and find the answer.

  I think that you will be able to correct the error by clicking on the option of additional installers on the left pane, and then click OK to save the build.

  You probably asked to point the installer on some files that were missing since the upgrade.  I think that this occurs when the version of something on your computer changes, but the installer doesn't seem to know other installers until you visit the dialog box.  It would be brutal trying to replicate, but I met the same problem before.

• Error message when you install the first elements 10 on my PC

  I bought the Pack Adobe Photoshop Elements 10 and Adobe Premiere Elements 10... and when trying to install, have successfully installed Adobe Photoshop Elements 10, but get an error message when you try to install the first Elements 10.  The Error Message reads as follows:

  This installation package is not supported by this processor type.  Contact your product vendor.

  Now that?  I don't know what to do from here.

  Could you please someone get back to me?  Thank you

  Hello

  Disc 1 contains the installer for 32-bit Windows.

  Disc 2 contains the installer for Windows 7 64-bit.

  Disc 3 contains the installer for mac OS.

  Disc 4 is the content of the disc for Windows Adobe Premiere Elements.

  Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.

  You can install from Disc1, 2 or 3 depending on the operating system running on your computer.

  Thank you

• Receive error message when you open Outlook; the path specified for the file G:\outlook...pst is not valid.

  I recently exported my outlook to a pst file and saved on my external hard drive.  Since then I get this message when I open Outlook "the path specified for the file G:\outlook...pst is not valid.  How to stop?

  NEVER use the. Functions of export/import PST in Outlook.  They are broken, have been for some time, data loss and often corrupt Outlook profile in use. To perform a backup, just close Outlook and make a COPY of the. PST file.  Looks like (and I guess here) your external HD is G:\. This being the case, that. PST file is probably still attached to Outlook and Outlook can't find it.  With Outlook open, see the supplement files pane. PST file, right-click, and then click "close".  You may need to have the hard drive external and exported. File PST attached and available for work.  If this does not work, you have damaged your profile and will need to make a new one:

  How to create and configure an e-mail profile in Outlook 2007 and in Outlook 2003

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Print the error message when you try to print from a Vista network printer

  I have 2 computers and 1 printer. Usually, when I wanted to print computers I unplug the cable to a computer printer and plug it into the other computer. Now, I use a USB switch with computers and a printer plugged into it so I won't have to unplug the cable from a computer and move it to another. The problem is that I get the constant pop-up message that says "Windows - writeback failed. Window could not save all the data for the E:\$mft. The data has been lost.

  What should I do to fix this?

  Thanks in advance,

  Hi Hydnah45,

  ·         When exactly do you get this error?

  ·         You have windows XP INSTALLED on your computer?

  Try these steps if you have windows XP INSTALLED on your computer.

  Step 1

  To resolve this problem, first check whether the feature 'Turn on disk write caching' is lit. If it is enabled, disable it. To do this, follow these steps.

  To disableActivate the disk write cache, follow these steps:

  1. click onStartand then click my computer.

  2. right click on the hard drive, and then clickProperties.

  3. click on thehardware tab.

  4. Click to select the hard drive, and then clickProperties.

  5. click on thepolicies tab.

  6 clear the boxenable the disk write cache , and then click OK.

  7. clickOK to close the disk Local (c) properties dialog box.

  8. Repeat steps 3 through 5 for each hard disk that is installed on your computer

  Step 2

  Make changes in the registry

  1. start the registry editor.

  2. Locate and then click theenablesecuritysignature under the following key value in the registry:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Lanmanserver\Parameters

  3. on theEdit menu, click modify.

  4. in thedata value: box, type 0, and then click OK.

  5. exit the registry editor.

  6. stop and restart the service server,or restart the computer

  Important: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  If you have windows 7 installed on your computer try running printer utility.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  I hope this works.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message when you use the menu buttons in IE but not chrome

  Hello.

  My recently transferred website has a problem when you use the menu anywhere on the site in Internet Explorer, but not on my mac using chrome? I get this error message came up on top of the screen which takes three clicks to go MuseJSAssert: error calling the function switch: TypeError: object does not support property or method . So, if I click on anything else it pop ups again. Any ideas how to get rid of this? I tried to re - download files from muse, but the same phenomenon occurs. I tried to download the files in a folder of exported frm different muse I saw had worked for someone else on here, but no difference? Any help much appreciated.

  Website: vanletteringco.com

  You might get an error that iPage are sorting when opening too, just remove the /root1 in the address bar to see the site?

  Thank you

  GAV

  Gavin,

  Using Jotforms should ideally create not the questions here. Did you try reseating Jotforms code? I suggest you to get a charge of Jotforms code and then try to insert it to test.

  Kind regards

  Sachin

• Error message when you add the account to TimeMachine

  Hello

  I get the error in system.log when I enter my account information to access a drive for time machine below

  System.log:Feb 14 11:31:04 iMac - 5 K sandboxd [133] ([25623]): kcproxy (25623) political system: deny /Library/Keychains/System.keychain file-writing-untie

  The above error appears when you use access Keychani to run the add-in, when I use the route of the control panel to add I get a slightly different error

  System.log:Feb 14 11:19:12 sandboxd iMac - 5 K [133] ([465]): writeconfig (465) political system: deny /Library/Keychains/System.keychain file-writing-untie

  So it seems to be a sandbox configuration problem?

  Keith

  What functional problem you have, if any? Log messages are not a problem in itself.