Error message with Action Script 2.0 file

Similar Questions

• Problem with rename folders in Windows 7: get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. »

  When I try to rename a folder in Windows 7 I get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. "Can anyone help?

  I gave up and solved the problem by buying a third party software to use as a directory, Directory Opus.  It is much more functional than the Microsoft Directory and I have never problem renaming of files.  I am just amazed that so many people have this problem and Microsoft has not fixed.

• get error message SCR ADE 4.5 E file is not found, the source file cannot be read.  Tried to withdraw approval of & re allow including factory reset and re load but still can not read the library on my Kobo Touch book.  With the help of Windows 10...

  Hi, when you try to read the book from the public library on my Kobo Touch I get error message SCR ADE 4.5 E file is missing could not read the source code.   I tried to remove and re downloaded from the website of the public library (no luck), I did the resets, including plate and re authorizing with the reset factory and re loading (no luck).  This problem started after the last update to 4.5 ADE unfortunately as before no problem.   If anyone has any ideas, would be appreciated.   Thank you.

  Try it work when you uninstall 4.5 and install new 3.0: the Adobe Digital Editions software downloads

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• Whenever I try to send mails via Gmail (even in Safe Mode), I get the error message "your action failed. Please try again ".

  Everytime I try sending mail through Gmail FF 18.1, I constantly get the error message "you action failed. Please try again ". I have to use the HTML view in Gmail that I really hate. I tried the Mode without failure of Firefox as well but not good. Please fix this for me.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  If clearing cookies doesn't work, then it is possible that the cookies.sqlite file that stores the cookies is corrupted.

  Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other files to present as cookie cookies.sqlite - journal in the profile folder of Firefox in the case where the cookies.sqlite file has been corrupted.

  • http://KB.mozillazine.org/cookies
  • https://support.Mozilla.org/KB/deleting+cookies

• Libretto U100 Bluetooth error message indicates - getting the list of files fail

  Hello

  I try to connect my Libretto U100 Bluetooth to a new Sony Ericsson mobile software Bluetooth for exchanging information.

  I can connect and see the files on the mobile phone, but when I click on the folders, there is an error message indicating "getting the list of files doesn't have."

  New drivers must or is there something else I need to set up at all?

  Previously, I was able to connect to any other mobile phone with no problems.

  Thank you in advance for help you.

  Hello

  I m sure that it s is not a Bluetooth problem or a cell phone if it s possible to connect Sony Ericsson and other mobile phones. Unfortunately, I'm not very familiar with this laptop but I found this site with FAQ on your mobile phone.

  http://www.Ericsson.com/Contact/FAQ.shtml
  http://www.Esato.com/Help/FAQ.php

  In addition, you should check the manual of the phone. I sure you will find a description of m

  Good luck

  Good bye

• Error message "Preview not available for this file.

  I use LR 4.4, but it did not work properly since I got my new camera (Canon 70 d). When you try to import, I get the error message "Preview not available for this file. I got lucky better connection of the device with a usb cable, which allow me to see the jpg images, but he wouldn't let me see the raw images (.cr2). I would solve this problem by opting for the LR5?

  I use LR 4.4 on a Windows 7 PC.

  Thanks for any help that can be provided.

  Robert

  Support for the Canon 70 d was introduced with LR version 5.2. See the link below.

  Camera Raw plugin | Supported devices

• Transparency with action script

  I have a swf file and I want to give a transparent background on the stage. I understand that it is possible to give it transparency through the HTML publish setting using the ' transparent windowless "property.
  However, I wanted to know if there is an actionscript property to give the same effect of transparency to the scene. like the opactiy or something (sorry, that I may be wrong)

  The thing is I have an external preloader that loads the swf content and when it is loaded, the stadium loses its transparency.
  any help please with action script on transparency?

  As mentioned, that there is no bottom in a loaded SWF file. Unless you EXPLICITLY put a layer in your document with a background on the subject, it is transparent. You can load SWF 500 inside another, you will never get a background of any of them.

  The sole purpose of context is if the original HTML wrapper was not established transparent windowless.

  Your problem is elsewhere, trust us. Look for something, a background of drawing in one of your movies, because something is without doubt.

• Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  Firefox does not open, but is rather the error message "Unable to read the configuration file." He has worked in the past, but not now.

  I REINSTALL 10 TIMES SO DON'T TELL ME THAT!
  I'm piss because I need firefox work again, so I can finish my reseaching in 5 days.

  
  

• receive the error message with every new open tab

  Whenever I open a new tab, I get a popup error message. I have screen shots that can be granted.

  At first, I thought it was a mistake to Java, but I've uninstalled and reinstalled Java.

  There are two error messages which read:

  [JavaScript application]
  evalInSandbox:Error: Permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass.

  [JavaScript application]
  Error: Permission denied for <https://facebook.com> create a wrapper for the object of class UnnamedClass

  So I clicked on help > troubleshooting information and choose Reset Firefox.
  Now I get a new error message with every new tab open.

  [JavaScript application]
  Error: syntax error

  Please tell us how to do this.
  Thank you
  JudyLeeThurber

  1. In the address bar, type Subject: config and press enter. The subject: config "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise!, to continue on the subject: config page.
  3. Type browser.newtab.url
  4. Double click on the first result, a new window should now display.
  5. Type of topic: newtab in the area.
  6. Click ok and load a new tab. It now works of mireille?

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

• I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

  Original title: Matshita DVD-R UJ 890

  Hi AJordanMiller,

  Try these methods.

  Method 1

  Run the fix - it from the link below.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2

  See the help article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

• I continue to reinstall cs6 on mac because I get the error message that I can't save files - blah blah

  I continue to reinstall cs6 on mac because I get the error message that I can't save files - blah blah

  What is your version of the OS?

• Displaying an error message with a link to the error field

  By default, validation of the ADF has usually shows an alert with an error message and a link to the field of the error.

  I have some custom validations where I finally to display the error message with this:

  public static void MessageError (String messageText) {}

  String messageText = "" No. is han sown estos datos '; "

  FacesMessage fm = new FacesMessage (messageText);

  /**

  * set the type of the message.

  * Valid types: error, fatal, information, warning

  */

  fm.setSeverity (FacesMessage.SEVERITY_ERROR);

  FacesContext context = FacesContext.getCurrentInstance ();

  context.addMessage (null, fm);

  }

  My client application displaying a link to the field in error in this kind of error alerts as do the standard deviations.

  Is it possible to achieve this?

  Try setting the first parameter to the addMessage (which has the value null in your case) on the id of the component whose validation failed. That's what part.

  Timo

• error message with 'learn more' (need admin rights)

  I'm on a new mac and I have creative cloud on my desk - when I try to download acrobat pro, dreamweaver, etc. - I get an error message with "more" stating I need administrator rights and the download fails

  Hi sky4uo,

  If your user account is a Standard account then you could get this kind of questions. If please, raise your account rights to an Admin account and try to download the software again.

  Please let us know if it helps.

  Kind regards

  Abhijit