Error Msg: "administrator has banned access to the readers of CD/COMPOUND.

Similar Questions

• Windows 8 administrator has disabled launching of the display of the Panel

  When I try to change the desktop icons in the control panel items, customization, I get the error message

  Your system administrator has disabled launching of the panel display.

  I am the administrator and I am not aware that I did.

  I tried to find answers by research and found information on the use of the Group Policy Editor. To configure user/models of administration/Control Panel / display the parameter disable the panel display is currently set to not configured. I tried to change it to disable (i.e. disable disable it then activate) but it has no effect.

  Please someone be kind would help me so that I can change my desktop icons.

  Hello

  To resolve this problem, you can do a simple registry fix using the Windows Registry Editor.

  REGISTRY WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  un) start the registry editor by pressing the Windows key + R to run the control box and then type regedit and press on Enter.

  (b) access HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System

  (c) If you have an entry for NoDispCPL, double-click it to open it

  (d) otherwise you can create it by going to the Edit menu and selecting new then DWORD value

  (e) enter a name of NoDispCPL and press enter

  Once you have this entry you have to double click it and set the value to 0

   

  When you are finished, close the registry editor. The change will take effect immediately.

  Please post with the State of the question.

• Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Dirext-x-file-d3d9dll-is-missing-Baz/2c639497-CFBA-4C6D-9155-f946f8dc1a45

  It will be useful.

• ORA-33288: another user has inconsistent access to the analytic workspace

  Gurus
  
  A customer of our meeting suite error when make action (refresh the data) of the responsibility for the EBiz project portfolio analysis
  
  # # 0 in detail java.sql.SQLException: ORA-34344: FPA analytic workspace. FPAPJP is not attached.
  ORA-06512: at the 'APPS '. FPA_UTILITIES_PVT', line 129
  ORA-06512: at the 'APPS '. FPA_PROCESS_PVT', line 2467
  ORA-33272: FPA analytic workspace. Cannot open FPAPJP.
  ORA-33288: another user has inconsistent access to the analytic workspace FPA. FPAPJP and the timeout has expired.
  ORA-06512: at line 1
  
  I searched the documentation of OLAP, metalink, google, but all simply suggest "Expect that the conflict is over.". We waited and asked their DBA to check active connections, but none has proven to help us.
  
  Issues related to the:
  ======
  1. how to avoid this error?
  2. How do I know the number of users / user information connected to the FPAPJP workspace?
  3. How can we close these sessions?
  
  Really appreciate your inputs.
  
  Thank you
  Charlene

  # 1, it seems that the process is trying to detach a workspace that is not attached. Just check in your code if you try off somewhere and work space is not attached.

  Thank you
  Brijesh

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Your system administrator has disabled launching of the display settings control panel.

  I get the following message when I try to change the screen saver in the control panel:

  "Your system administrator has disabled launching of the display settings control panel."

  I am the administrator. My computer was before my husband, but he doesn't remember to disable anything until he gave it to me. What can I do to restore it?

  Please help, I deeply appreciate.

  Ah, sorry. Try this instead.

  Its a link to specific steps to solve this kind of problem.
  I hope this helps!

  http://social.technet.Microsoft.com/forums/en-us/itprovistaie/thread/58946fa0-80d7-4a5f-b9ac-16d3ca1587d7
  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setup error: you have read-only access to the inventory of oracle

  Hi guys,.
  
  In some versions of Linux, for example. Fedora, Ubuntu... every time I install the Hyperion product, I get this error "you have read-only access to the oracle inventory." and also the interesting thing, if this error comes Oracle does not settle "OpenLDAP' which is required to run shared services.
  
  With Oracle Enterprise Linux, and everything seems fine. and I did not get the above error also OpenLDAP is installed.
  
  any help would be appreciated. attached is the screenshot of the error.
  
  [https://docs.google.com/leaf?id=0BwB5xiYJ_HGwMDZkNjQ1OTEtMDg4Zi00NGM3LTk5NDAtYzE1ZmJkZTcyMzU0 & hl = en]
  
  Thank you

  Supported versions of linux, with you have found problems.
  I thought it was just Oracle Enterprise 4/5 and Red Hat Enterprise 4/5 that are supported.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Administrator has denied access

  Windows XP Pro - access to install Skype denied.  Reason - "insufficient privileges".  Assistance requested.     ColnZW.

  As requested by the wording was:-"the installer has sufficient privileges to access this directory - C / documents and settings / all users/start/menu/programs/Skype.»  The installation cannot continue. Log in as administrator or contact your system administrator.

  I'm already logged as administrator

  Hello

  What is the full error message that you receive?

  Have you logged as administrator?

  I suggest you log on as an administrator.

  You need to take ownership of a protected file to access. If another user has restricted access and you are the computer administrator, you can access the file to appropriate.

  How to take ownership of a folder

  a. go to C:\Program Files (x 86).

  b. right click Skype folder > then click on properties...

  c. on the Security tab, click permissions or Edit.

  d. select "" all group > click on "Full control" in the Type of access list.

  e. Select permissions on subdirectories check box replace. Click OK > Yes.

  You can also search the steps described in the article.

  You receive an "Error 1606" error message when you try to install or remove a program from Microsoft

  http://support.Microsoft.com/kb/886549?WA=wsignin1.0

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Please get back to us with the result. Also contact the Skype support.

• Need to leave the command msg to run without access to the physical machine

  OK, here's my problem. I try to get to where we can use the msg command in a local network in Windows 7. The problem is all the time we try, we get the error message 5.

  I found the Reg key. AllowRemoteRPC located in HKLM:\SYSTEM\CurrentControlSet\Control\Terminal Server should be set to a value of 1. Of course, I can make the change on the spot, but I would like to be able to do it remotely. I did a little experimenting with Powershell, but I prefer the good old "cmd. If someone could help me how to change the key from 0 to 1 using command line of my machine it would be great.

  A few things I should mention:

  I started playing in the prompt for the last week or two, so my syntax is juvenile

  I have domain administrator credentials and can access their machines with those

  I am running as an administrator

  I psexec, so if you could let me know how it for my own local which machine would be much appreciated as well, that I can use the same commands to change their

  The command I'm using is C:\>Reg add 'HKLM:\SYSTEM\CurrentControlSet\Control\Terminal' /value 0 (locally to change my return of 1) but obviously I do something wrong, I'm not sure of that. Any guidance you could give would be appreciated.

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  I hope that helps!

• Enable-ADFSDeviceRegistration command ends with an error (Service account has no access to require it)

  Hello

  I get this error message (see screenshot) when you try to run the Enable-ADFSDeviceRegistration command.

  I need to know how to tune my administrator rights to access the device to record ADFS service. Any ideas?

  Yariv

  Hello

  The problem with you try to run the command Enable-ADFSDeviceRegistration would be more TechNet forums. Ask your question here

• Admin has no access to the user account

  I have a XP Pro computer where a user profile directory has no access at all to administrators: only for himself and system.

  Is this normal and supported? How can this be achieved?

  When I create a new account on this computer, the profile directory allows access to administrators.

  The problem is that I want to use some backup software that runs as administrator, so that it cannot properly access the user's data.

  NT Backup of the Microsoft can save everything without problems.

  I would so understand, I can ask the author of said software to backup to fix, or my setup is weird way and is.

  Thank you

  -pa

  You could remove rights administrative account to any file or folder on the computer while you could do this for a profile.  If you leave rights system alone, Yes, the built-in backup function still works.

  However, anyone with administrative rights could just as easily give themselves rights of return...

• Get the message: the system administrator has set policies during the uninstall of a program.

  Original title: uninstall error.

  How can I uninstall without the system administrator has set policies

  Hi Telowe,

  1 are logged as administrator?

  2. you have more than one administrator account on your computer?

  3. what application you are trying to uninstall?

  4. this happens only with a specific application?

  Method 1:

  You can try disabling UAC and check if you are able to uninstall the program. Try the instructions in the following article to disable UAC.
  Enable or disable the User Account Control

  Note: We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Method 2:

  You can temporarily disable a security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• Administrator to deny access to the file

  I am running Windows Vista Home Basic with service pack 2.  As an administrator I am frequently refused access to certain folders, e.g., data application.  I thought that the administrator has access to all folders on the computer.  Is this something common to the basic family version?

  No, it is new with Vista.  Even administrators do have access to some system, junction points files and folders even in their own profiles to prevent the problems of changes, deletions or additions which might cause problems (and even administrators don't know enough to work safely in these areas).  You can use permissions to work around these problems of access; However, I would just leave them alone because most of the time (except if it is advised by Microsoft Support) there is no reason to be in these places.  It is a big change in XP where access was essentially unlimited, but just adjust in Vista.  It is not only your version but in all versions.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to install a program (error: System Administrator has set policies to prevent this installation)

  When you try to install a program (program specific IM only 1) I immediately get this error.  "The system administrator has set policies to prevent this installation. There appear to be patches for earlier versions of Windows, but I can't find one for Windows 7 Home Premium.  I am the administrator and the only account on a PC in network.

  Hello Bruce_on_Maui,

  See if you are using a command-line high, who can help with your problem.

  1 - Open command prompt in administrator mode (start--> Accesseries--> right click on command prompt, select run as administrator

  2 - Run the file msi or .exe from command prompt

  3. now check and see if you can complete your installation

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think