ERROR: NetExpress 5.0 install path not found - WOOF SDK 4.1

Similar Questions

• To connect to a shared folder between PC - error Code 0 x 80070035 "network path not found."

  I have a client with 8 computers on a workgroup network.

  Among youth, 2 computers not talking to each other or to connect to shared folders on the other drive. Both computers will speak on other computers on the network (wireless).

  I looked at all the solutions that have been validated for the message Error Code 0 x 80070035 "network path not found." and none of them have solved the problem. I can't ping one computer to another. I noticed that when troubleshooting on the PC (both are desktop windows 7), 'client' that when I ping the other PC it returns an IPV4 (192.168.x.x) address, but when I ping another PC on the network returns an IPV6 address. I tried to turn off IPV6 adapter in the network adapter settings. It made no difference. I searched several 6to4 adapters in Device Manager, but only 1 exists. Turn it off did not seem to make a difference. As I said, both PC's are accessible by other computers on the network (wireless), but they cannot access each other.

  Restart both computers several times (including cold starts and stops).

  The only one I don't have not tried yet is releasing and renewing the IP address on both.

  Any suggestions?

  Well I fixed it myself.

  In this case, there was a number of things I've done.

  First of all, I checked to make sure that the firewall is not the issue. It wasn't.

  Secondly, I checked the network connection to see if it has been set to the office network. One of them was, and that we have tried to connect to a was created for the Public network. Who changed the network and restarted.

  Who has not solved the problem.

  Finally, in desperation more than any other thing, I restart the network modem.

  Guess what? That fixed the problem.

  So, I guess it was a problem of ARP table or some other problem. When I tried to ping from the "client PC' on the shared drive PC, the IP address was 192.168.1.65. When I got the customer go to the drive shared PC and check the IP address it is 192.168.1.69.

  Restart the modem and the "client PC" has solved the problem.

• Troubleshooting system error: 53 - path not found network

  Hi, I wonder what my kids are doing when they use their computer. I read on netbios hacking, but it won't work. When I am typing "net use G: \\192.168.x.xxx\C" the computer just says "error troubleshooting system: 53 - path not found network".» How to fix this? or y at - it another option?

  This means that there is no share called 'C' on the machine whose IP address is 192.168.x.xxx. Experts in networking forumw7itpronetworking /threads ttp://social.technet.microsoft.com/Forums/en-US/ would be able to tell you how to create this share.

• Cannot connect Windows 7 to the field get error network path not found.

  Title: original network path not found

  I have a professional Windows 7 Desktop and Windows Server 2008 Standard server.  When I try to connect my desktop computer to the domain, I receicve an error "the network not found path.  I tried almost all of the solutions found for the search for this error without result.  How can I locate the source of this error and fix it?

  Hi ECBender,

  Thanks for posting the question in the Microsoft Community!

  You cannot connect to a domain and the message that the network path was not found.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  I hope this helps. If you need additional help, let us know and we would be happy to help you.

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Since the last update installed, I can not open my older files.  I get the error message that the file is not found.  Installation remove my old files?

  Since the last update of Adobe Reader XI installed I can shoot to the top of the list of all my files on the SHOW ALL option, but when I try to open my old files, I get the error message that the file is not found.  The update to remove all my old files?  Is there anyway I can locate, then open them?

  You can use Windows or Macintosh to search all PDF files and start to bring together them.

• Scheduler BI - error "path not found".

  People,
  
  I am trying to edit 'My account' to set devices in 'My products'-> book.
  I could note the health empty error message and not able to create any kind of device.
  
  ******************************************************************
  Mount errors
  
  Path not found (/ users/admin/_prefs/instruments/e-mail)
  Error details
  Error codes: U9KP7Q94
  ******************************************************************
  
  Please let me know where things could've gone wrong.
  
  Thanks in advance!
  
  Cecilia.

  You must manually create.

• Could not initialize the TestStand engine. Path not found.

  Hi, so far I have installed and removed TestStand 3.5 3 times in a row, just to still get this message (see subject) when I try to start the sequence editor. I even uninstalled all the software of NOR I had on this laptop reinstall the whole... Nothing has worked. Now I wonder, is that what I'm doing wrong? What can I do to get TestStand running?

  Well well, on this message when I hit OK, another message

  The sequence editor does not start. Cannot create the TestStand engine.

  Hit OK on that message again just puts an end to the sequence editor leaving me with a white screen.

  Any ideas what is wrong?

  best regards and thanks in advance.,

  Ingo

  Ingo-

  Sorry for your frustration. Your idea to uninstall and reinstall should work normally. The second message is just the result of the first error, so we need to understand which path is not found, and we don't know why this happens. I tried to force my copy of TestStand 3.5 to fail like messing around with the installation and I couldn't find a way to cause the error "path not found". I had a lot of other more detailed errors, but I have been unable to reproduce your message.

  A few questions:

  (1) what operating system do you use?

  (2) you install to the default location under Program Files? You use a network somehow path?

  (3) you have permission to write the locations on your system?

  (4) what are you logged in as long as administrator during the installation, reboot and start the sequence editor.

  (5) have you messed with any of the registry under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\TestStand\3.5 settings, where something is wrong manually?

  (6) added user under the TestStand directory components that could somehow load and cause a problem?

  If you have an installation on the system, you can quickly try to empty the directory Cfg under TestStand, so that it generates new copies of these files.

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• How resolve the error that reads "wmvcore2.dll's not found" after the installation of Cool Edit Pro 2.0?

  Hello

  I recently tried to install Cool Edit Pro 2.0 on my Dell laptop. After that it's over, I went to open the application, but the error which read "wmvcore2.dll is not found" message popped up. He suggested I have reinstall the application, so I did, but nothing helped.

  I wonder what I can do to solve this problem and can you give me any help will be greatly appreciated.

  Thank you.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  If the above does not help, try to repost in Forum Vista programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Linksys - router bridge - E8350 path not found network

  Dear community of Linksys,

  I recently bought a Linksys E8350 router, to replace the old AP in my network domestic.

  To make the installer of my clear network, I did a little diagram:

  

  So, as you can see, at the top left is the router/modem provided by my internet provider (Telenet, Belgium).

  I have a wired connection in my room, where I have my desktop and NAS connected computer. I also plugged the

  Linksys E8350 that is configured in Bridge mode. My laptop is connected wireless to the E8350.

  On the E8350, I disabled DHCP and NAT and gave him a static IP outside the range of my other router.

  My problem:

  When I go to the network through windows file Explorer, I can see my desktop from my laptop and vice versa.

  But when I double click to access one of them, I get the error message "network path not found".

  Connection via start > \\Computer-name gives the same error.

  Since my laptop or my desktop, I can see my NAS on the network. I have internet on all my devices:

  My office through internet cable connection, my laptop has wireless internet connection trough

  and I can evaluate my NAS from the internet.

  When I remove the E8350 entirely from my network and connect my laptop a hollow wired connection.

  everything works fine. I can see all the devices on the network, connect to my NAS and share files between computers.

  Things I tried already:

  -My PC and laptop are both in a 'private network '.

  -J' disabled my firewall

  -Everything is activated in the menu "sharing advanced settings."

  -J' tried to connect the E8350 to the switch via the Ethernet or WLAN port, nor to solve the problem

  -J' tried to change the NETBIOS settings

  -I don't have your antivirus software that might interfere with something

  -J' updated the firmware on my linksys router to the latest version

  To be clear, the problem occurs when I put the E8350 in my network, otherwise everything works perfectly.

  I hope that I have provided some information decent on my problem, because I can't seem to figure it out myself.

  Thank you in advance.

  Pindox

  The topology of your network is effective from your diagram. With the E8350 in mode bridge in this topology is WAN is connected to the network switch.

  Many devices of bridge no hand NetBios address very well. In some cases, the best way to access the network through a bridge device resources is to use remote devices IP address instead of its computer\device network name.

  In Windows, you can drive old school card NAS records using the IP address of the Servers\NAS:

  PC command line:

  NET use s: \\192.168.0.3\my_nas_folder / persistent: Yes

• Desktop Windows Manager is disabled and the theme service is not running. Error 126: the specified module is not found. »

  I tried to install VistaOSX the theme of this site http://vista-os-x.en.softonic.com/. My current theme of vista disappeared and he turned to classic windows. I'm not able to activate Desktop Windows Manager. Error code I get everything by starting the service theme is "Windows could not start the service theme on the local computer. Error 126: the specified module is not found. »

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• Home network problem: 0 x 80070035: network path not found.

  I have problems with my home network; my laptop is unable to access the files on my HTPC

  More precisely:

  Laptops and PCs are running Windows 7 Ultimate. My laptop is connected to the home wireless network, the PC is connected through the LAN. Router is a Netgear DG834GV. Both computers have fixed IP addresses. They are part of the standard workgroup workgroup. There was formerly a group residential, put in place, which worked very well. We also have a Vista laptop that does all the unusual problems. Until a few days ago, the whole Setup worked perfectly. I could previously access/copy/distribute multimedia content, play on the PC via Zune music on my laptop and print from my laptop to the computer, but now I am unable to do one of these. The other laptop still works fine.
  From the network on the PC screen, I can see the files from the laptop and access.

  However, since the network on the computer screen laptop, I see the PC, but when I try to open it I get the error "Windows could not access \\MEDIACENTER. 0 x 80070035 the network path was not found. "I ping the PC with the IP address and name, and I can even remote to the computer desktop.

  ipconfig on the laptop did something funny...

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 139:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 143:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  Card tunnel Local Area Connection * 140:

  ... up to 200. I can't that assume it goes back to #1 as well.

  After a few suggestions on here I just went through the enable netbios over TCP/IP, but now I can't see even the PC! Still can ping and access internet tho.

  Any suggestions as to what may be the cause?

  Here is the solution for "error code 0 x 80070035 network path not found" on Windows Vista and Windows 7 computers. Click on the button 'START', select 'CONTROL PANEL' and go to 'DEVICE MANAGER'. Click on "NETWORK CARDS", then click on 'VIEW' and select 'SHOW HIDDEN DEVICES'. In the expanded view, you will see a long list of numbered "MICROSOFT 6to4 ADAPTER". My Windows 7 Professional Office had 200 of them. Right click and select 'DELETE' on all but 1 of them. You can only do 1 at a time, so it takes some time. When you have only 1 left, restart the computer and enjoy being able to see the other computers on your network, including the RESIDENTIAL group files.

• vmrun - error: the specified service provider was not found.

  Hello

  I installed vmware server 2 on Gentoo 2008.0.

  Installed versions:

  VMware-server 2.0.1.156745 - r3

  VMware-modules 1.0.0.24

  VMware vix 1.6.2.156745 - r2

  Everything works fine from a remote machine, but if I want to start a virtual machine in the console via vmrun, I get this error message:

  Error: The specified service provider was not found

  Any suggestions how I can fix this problem?

  The problems seem to stem from the fact that you don't have the "vix.libdir" parameter in your global configuration file. Usually, it is located in/etc/vmware/config by the presence of a line like:

  vix.libdir = "/opt/vmware/vix/lib"
  

  If you add to that, vmrun needs to start working.

• all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

  all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.