Error Oxc0000135

Similar Questions

• tryng to install google chrome and it comes up with does not initialize... error OXC0000135

  Google Chrome installs... it comes up with ' no initialization not... .error OXC0000135. Your help would be appreciated. XX

  Google Chrome installs... it comes up with ' no initialization not... .error OXC0000135. Your help would be appreciated. XX

  Google Chrome problems need to be addressed by experts from Google Chrome.
  Use this link and go to the installation/uninstallation issues section.

  http://www.Google.com/support/forum/p/chrome

• How can I get rid of the error oxc0000135 status? It does not my pc start.

  Under XP Home edition, I get the error message status oxc0000135.  Even when I try to reboot from the windows CD.

  Hello

  1. what changes have been made to your computer, after which the issue started?
  2. when exactly did you get the error message?

  Follow these steps and check if they help.

  Step 1:

  Test the issue in safe mode and check if the error persists.

  Step 2:

  I would recommend you can start your computer in a clean boot State, and check if the problem persists if it starts normally in safe mode.

  Note: The steps in the article to restart your computer as usual (normal mode).

• How to fix the Windows Vista system - application error failed Oxc0000135 - APSDAMON.exe

  When the computer turn it on: APSDAMON.exe (1) - error pop up asks no error Oxc0000135.click ok to terminate the application. The following people also mistake Oxc0000135.

  (2) Winword.exe

  (3) hpqtra08.exe

  (4) onenotem.exe

  (5) Microsoft office onenote quick launcher stopped working.

  (7) HP digital Imaging monitor has stopped working.

  (8) push apple has stopped working - close the program.

  peggy72

  Hi Peggy,

  -Did you change your computer, after which the question began?

  Follow these steps and check if they help.

  Step 1:

  APSDaemon.exe is a file Apple Application Support. (Apple Application Support, this is where are kept copies of the program files used by several different programs from Apple).

  Let's try something relatively simple first.

  a. restart the PC.

  b. now, click Start, type "Add or remove programs".

  c. Select Apple Application Support, click on 'Edit' and then click 'repair '.

  Step 2:

  I recommend you to run SFC scan as this seems to be a problem with the integrity of system files.

• I get a message "error autorun.exe - application the application could not initialize properly (oxc0000135). Can someone please make all suggestions?.

  I am trying to install a game via a DVD and get a message "autorun.exe error - application that the application failed to initialize properly (oxc0000135) click on ok to close the application. I use Windows XP. Anyone would please any suggestions to fix this? Thank you kindly.

  Hi Matt,

  Thanks for the reply.

  I really apologize to provide suggestions evil as menitoned in above post about Windows 8.

  Method 1: I suggest you to consult and post the thread in the forum link and check if it helps.

  http://forums.CivFanatics.com/showthread.php?t=173648

  http://forums.CivFanatics.com/forumdisplay.php?f=144

  Method 2: If the problem persists, I suggest you to contact the game manufacturer for assistance.

  I hope this helps. If you have questions about Windows, I suggest you post in the Microsoft Community. We will be happy to help you.

• Setup error Application-"the application could not initialize properly (Oxc0000135). Click on OK to terminate the application. »

  Had this feature Sharper Image 5 days weather for Christmas and of course we have over-paid for her-$50 bed bath & beyond.  I'm not as technical as most of you, but I am unable to even get the software to install.  I get an application error installation "the application could not initialize properly (Oxc0000135).  Click on OK to terminate the application. "I got the Version 1.01 in the box (and it does not say is the app forecast 4 days) and am running XP.  Thanks in advance for any help - of course, the is Helpline is to give an ambiguous 'we are closed for the holidays' without parameters for the last seven days... Grrr...

  Sure that the error occurs when you don't have a .NET framework is installed on your system. You can download/install here: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=26

• oxc0000135 code error starting of google chrome on windows vista

  I rebooted google chrome and when I try to open it I get the error code oxc0000135, application failed to initialize properly.  y at - it a patch or a cure?  This all started after installing fios at home.

  Hi Loubishop,

  Are you facing issue with Google chrome or another application also?

  If you are facing the issue only with Google chrome, you might get in touch with Google for additional assistance.

  Support Google

  http://support.Google.com/chrome/bin/static.py?hl=en&topic=14684&page=table.cs&tab=21605

  You can also visit our Google support at the address below.

  Impossible to open and launch Google Chrome. Error Application failed to initialize properly (0xc0000135). End it.

  The above mentioned thread contains third party links.

  Note:   software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• error code oxc0000135

  by connecting to the computer, I receive several error messages. first error message oxc0000135

  Same application NKmonitor.exe message has not initialze correctly, trying to go in word

  WINWord.exe has failed. When you try to enter in same Excel thing Excel.exe has failed. all of these programs have

  stopped working. Try to make updates difficult that Microsoft has proposed three times and every time, I get (UPDATES

  NOT CONFIGURED CORRECTLY RETURNING CHANGES) Please help the I've got a lot of business

  the information I have to do.

  Hi beverlyjohnson,.

  1. you remember to make changes to the computer before this problem?

  Nkmonitor.exe is used by 'Nikon Transfer'. It is an application created by "Nikon Corporation".

  Step 1:

  If you have installed all Nikon products, you can try to uninstall the same and check.

  You can see the following link for uninstall a program.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Step 2:

  Since this also affects Office application, you can also try to try a system restore and check.

  You can try a system restore to a previous point where you have not experienced the problem.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• c000021a error fatal system ended unexpectedly with a status of 0 = oxc0000135 (0x00000000 0x00000000) the system has been shut down.

  This error is repairable? When I turn on my computer market, I always blue screen and error message. I do not see that my mouse shows thanks

  Mary

  Most of the errors are correctable. It's just that the BSOD errors are usually harder to fix than many others. Two reasons for this. One is that the system is usually more difficult with the result that the investigative process is hindered access. The other is that the initial error report indicates only the general nature of the problem and not the specific cause. If the system has been activated to provide a more detailed memory dump reports they can be analyzed. The problem for most users is that they do not have the computer skills to take on the task.

  Move to the specific problem you have. The document in the link below gives tips on the clues or pointers for the bug check code: 0xc000021a

  http://msdn.Microsoft.com/en-us/library/ff560177 (v = VS. 85) .aspx

  Please answer a few questions.

  1 how long have you had the problem?

  2 do you have added or removed any hardware or software during the period, shortly before the problem occurred. If Yes please provide details.

  3. are you able to access the computer in safe mode without the error occurring? My second link provides details on how to access safe mode if you have not done this before.

  4. your computer is a desktop or a laptop?

  5. What is your computer brand and model?

  6. what you precisely through a Windows XP CD? Not all computer manufacturers provide a CD. Your answer to question 5 could lead me to discover an alternative so you worry if you do not have a CD.

  The link following gives information on the Menu Options, Advanced Windows, you can try the last known good Configuration suggested in the first link I have provided.

  http://support.Microsoft.com/kb/315222

  Hope this helps, Gerry Cornell

• How can I get rid of the error of the program could not initialize OXC0000135 framework 4 has been updated help please Mildred w

  Whwn I try to open a program like incredimail also Adobe Reader 9.

  I get the program was unable to initialize OXC0000135 I updated the framework 4

  who has not solved the problem. I can't update or uninstall.

  I tried a restore but who wouldn't let me go to the problem area.

  If I upgrade to windows 7, which would solve the problem?

  I am running Windows Vista. Help, please! Thank you, Mildred W

  Have you tried to uninstall Adobe Reader 9 and Incredimail?  There is an update to Adobe Reader 10.1.0

  http://get.Adobe.com/reader/

  Perform a clean boot.  This document shows you how to determine which third-party application is causing the problem?

  http://support.Microsoft.com/kb/929135

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• SUMIF error

  I'm new to apple and get a syntax error when you use SUMIF.  In my table, I just need column F to test the value of column E.  If it is greater than 0, then divide by 20.  Thank you!

  In cell F1

  = E1/if(E1>0, 20, 1)

  fill down as needed

• An error in this Applescript that I can't understand

  Hi, I searched some forums and found this script below which I modified. It works great except for a single statement:

  runScript If = 1 then number error -128 I want the script to do is, when a USB drive is mounted and is in the ignoredVolumes as "USB Untitled" I want the script to stop. What I can't understand is, runScript is set to 1, "Untitled USB" Monte, runScript is not changed, why don't the script stops with an error "user cancelled"? On the other hand, if a key USB Monte is not in the ignoredVolumes, runScript is set to 2 and copy the file I want it. What hurts? It's probably something that will be very obvious when I see the answer.

  Thanks for any help with this problem,

  Mike.

  
  

  
  

  property ignoredVolumes: {'10,10 30 1. 5 't', 'files 1. 5 't', "Untitled USB"} - add if necessary

  property videoExtensions: {"avi", "mov", "mpg", "wmv", "mp4" and "mkv"}

  the value newVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / new")

  the value oldVolume to the alias (POSIX file "/ Volumes/files 1.") ("5T / old")

  game runScript to 1

                 tell application "System events".

  the value rootVolumes to disk (POSIX file ' / Volumes ' in the text)

  the value allVolumes to name of every element of disc of rootVolumes

  the value numofallVolumes to the County of allVolumes

  Repeat with the present book in allVolumes

  say application 'Finder '.

  if (the present book is not in ignoredVolumes and (this book as text) is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  runScript If = 1 then number error -128 - it does not give a 'User cancelled' error when "Untitled USB" is mounted

  runScript If = 2 then

                                                                          try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / new ") as text) to newVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in folder a." buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  Try

  duplicate (elements whose name is in the videoExtensions extension) in alias (POSIX file (' / Volumes / "& the present book &" / old ") as text) to oldVolume

  on error number errorNumber errorMessage

  _error value of errorMessage

  _errorNum the value to errorNumber

  If errorNumber is -15267 then

  display the dialog box "This file already exists in the folder B" buttons {"OK", "No"} default button 1 with the title "Film copy error?" giving upwards after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the result is 'OK' or back button gave up lead and then of

  eject the present book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  return

  end if

  end if

  end if

  end try

  display the dialog box "USB key will Auto Eject in 10 seconds or click OK... "buttons button 1 with the title"copy Complete - Eject? "default {'OK', 'No'} which gives after 10

  If the returned button of result is 'No' then

  Error number-128

  on the other

  If the button returned of result is "OK" or gave up a result then ejection of the this book

  display the dialog box "U S B D r i v e E j e c t e d - K O t o R e m o v e" {"no need to click on this button"} default button 1 button give up after 5

  end if

  end if

  end if

  end say

  end Repeat

            end say

  The way in which your external block If is currently based, the script can't do anything when this book is in the ignoredVolumes, it can not yet test the runScript value. Try something like this:

  If the present book is in the ignoredVolumes then

  game runScript to 1

  on the other

  if (the present book as text is not '. ') DS_Store') then

  if there are alias (POSIX (' / Volumes / "& the present book) as text file ) then game runScript to 2

  end if

  end if

  
  

  Of course, you need to remove a "end if' the end of the script.

  
  

  
  

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.

• Display Rotation error

  Hello

  I had a problem with the rotation of the screen under macOS Sierra function. As the screen rotates, there is an error that pop up and later that I'm unable to get into system-> Display Preferences. It is for me a "mistake preferably: County not load display preferences" message and I was unable to rotate the screen back. I started from the system in safe mode and temporarily solved the problem. But if I want to rotate the screen again, it pops up the same error again. I was using the rotation function pretty well in OS X El Capitan. But since I updated to macOS Sierra, I had this problem.

  I wanted to know if there is a lasting solution to this problem.

  I'm using macOS Sierra on MacBook (13-inch, early 2015) Air with processor 1.6 Ghz Intel Core i5 and 8 GB memory DDR3 at 1600 MHz with 128 GB of storage.

  Hello PavanGJ,

  Thank you for using communities Support from Apple. I see that since upgrading to Mac OS Sierra problems of screen rotation. The preferences window does not. I know how it is important for your Mac to work reliably. I'll be more than happy to help.

  Great job to test mode without failure. In Safe Mode disables most of the third-party services, it could be a compatibility problem with an application that you have. Check out this article:

  OS X El Capitan: If you have problems with startup items

  You can not hold account that the title suggests it's to El Capitan. It applies to macOS Sierra as well.

  You can also test the issue in a new user account.

  How to test a question in another account on your Mac - Apple Support

  Let us know if that helps.

  Take care!