Error: problem loading user profile

Similar Questions

• I also, I get the error "the service user profile Service has no connection, failed to load the user profile" but I have not been able to correct the problem by following the listed solutions.

  I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip.  It is on the login page.  My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.

  I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files.  How can I fix the desk top to coinside with his status of being online.  Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.

  Home Group is Windows 7.

  Here is the Vista Forums.

  What operating system do you use?

  Vista info below:

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• User profile service: when I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

  When I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

  Isn't that one profile, the administrator and another account are ok

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947215#letmefixit

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• When I try to log in I have error message (user profile service service has no logon is not load user profile)

  I have Windows Vista

  error message appeare when we try to login after the entry of the password

  (the user profile service service has no logon is not load user profile)

  I don't have any changes

  I try in safe mode, but I could not open a session also

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• User account problems - create a new user profile with the error message: the user profile service service doesn't have the opening of session/user cannot load profile

  I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Receive error message - the user profile service has no log on. Failed to load the user profile. -How can I fix?

  I CAN NOT LOG - ON

  I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Log in problems: "service user profile Service is a not the user profile cannot loaded e to logon.

  After I typed the password Vista gives me an error screen... "The Service user profile service is a not the user profile cannot loaded e to logon.

  Any ideas? Someone has encountered this problem before?

  Please see the links to solve this question below. "The user profile Service has no logon. Unable to load the user profile.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  http://support.Microsoft.com/kb/947215

  If this post can help solve your problem, please click the 'Mark as answer"or if you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the administrator account, error message "the user profile service not a not the connection, the profile cannot be loaded"

  the user profile service has no connection, impossible to load the profile Monte after giving the correct password and im account .but other account users can connect.

  * help loggin - original title *.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Error: "the service user profile service has no logon. Unable to load the user profile.

  Original title: can't log on...

  When I try to connect my computer at home, I get an error message that reads... "The user profile service service has no logon. User profile cannot be loaded. Can someone tell what is happening and how to fix...

  Hi, Thunderrad25,

  Are you able to get into Safe Mode?  Try a system restore.  Select a date prior to the incident happening.

  These can be useful as well-

  A temporary profile is loaded after you connect to a Windows Vista-based system

  http://support.Microsoft.com/kb/947242

  The user profile Service has not logon.  View user profile cannot be loaded.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

  Original title: how to change a password for an administrator account that does not work properly?

  When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the steps in the article mentioned below and see if the problem persists.
  http://support.Microsoft.com/kb/947215
  
  Hope that helps.
   

• Forgotten Admin password, receive the error message "the user profile service has no logon. Unable to load the user profile.

  Can re above, anyone help? Thank you

  * original title - I'm having problems with "the user profile service has no logon. Unable to load the user profile"in order to resolve this that I have to sign as an administrator, but I forgot my password. What can I do? *

  Only suggestion I can offer...
  Go to safe mode... http://www.Vistax64.com/tutorials/123496-safe-mode.html
  See if there is another account admin, you've not seen before.
  If so, this is the built-in Administrator account. By default, there is no password.
  Logon to the account built-in Administrator and do the following:
  1 do a system restore
   http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  2 use this tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application

  If you don't see the built-in Administrator account... Sorry
  We are not allowed to help users to bypass the password protection, regardless of what are "reasons".
  Here's the Microsoft Policy about this:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Error Msg: the user profile service has no logon. User profile cannot be loaded.

  I am the administrator and all of a sudden I can't log on.  I can enter someone elses profile and can always use administrator, but cannot access my page.  Help, please.  Thank you

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  See you soon.

  Mick Murphy - Microsoft partner

• Error "the service user profile Service has no logon. User profile cannot be loaded. »

  Original title: I have Windows 7, I can't connect to my admin account (I'm admin) mess. reads: "the user profile Service service has no logon. User profile cannot be loaded. "What to do?  Mike M's to help him.

  As in "title".

  See http://support.microsoft.com/kb/947215/en-gb possibly

  or if still not see joy - http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-7-administrator-logon-failed-user-profile/04652778-1646-4bc9-9f5f-1c20273af15b

  I hope that one or you other help.

• Hi I have a "could not load user profile" can anyone helpme

  the computer gets freze and whent I try restarting appers this message "user brightness can not beloaded"

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then do-, use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the
  same for other accounts that may be difficult. Then if necessary you can also reset your password
  in the accounts. Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.