Error: Text flow inconsistency in text U12530 768 px breakpoint '

Similar Questions

• The text flow inconsistency bug - what to do when workaround does not work?

  Hello

  I am severely touched by the "Inconsistent text flow" bug, which threatens to force me out of business, because all my sites are produced in the Muse. I can't update my sites - the bug strike immediately and Muse stops.

  The message looks like this, but the references are always different (different textbox and different reference breakpoint):

  

  I tried the workaround solution described in the Adobe's Forum thread: Muse-P error incompatible a number of children through breakpoints in text U199116 [was: Muse has encountered an error]

  but without success. The bug is still strangleing that my business - and now my clients is growing very impatient.

  If I understand correctly, the bug was introduced with the last update of Muse. Why don't remember you this update and offers the opportunity to reinstall the previous version in good health?

  A very quick response will be appreciated.

  Thank you

  Sten

  I was forwarded to the Adobe technician who asked my MUSE-file. After a day, he responded with this:

  Please select the block of text you want to change and raises questions, in the 320 breakpoint. On the text block right-click > copy text formatting to > all breakpoints.

  I have now finished testing the solution - and it works. But it removes all formatting of specific breakpoint, then you will need to go through the process of formatting, once more.

  In fact, I recommend Adobe to address the initial fault base, so the bug never shows its ugly face again.

  But thanks for the advice, which brings me back in business.

• APEX 5 - error message is required validation (PL/SQL Funct. Return error text) +.

  Hi Experts,

  Just a little bit two things that slows me down

  If I chose the Type of Validation to Funct PL/SQL. Return to APEX4 error message error text must be empty.

  The APEX 5 the rating are mandatory. Is it due to something important?

  One last thing:

  If I create the new DA page designer, it creates by default new Action Show - it's good.

  If I change to run the JavaScript Code, affected elements are always set to "Items" (mandatory). I need to change manually all the time in the 'Selection' - value.

  

  Is there a possibility to change it in the next set of patches or liberation?

  concerning

  J

  Hi Jozef,

  If I chose the Type of Validation to Funct PL/SQL. Return to APEX4 error message error text must be empty.

  The APEX 5 the rating are mandatory. Is it due to something important?

  It is a known problem with that we followed

  Bug 20971572 - attr message error should not be visible for validation of type pl/sql function

  You can put whatever you want in the error message, it will not be used.

  If I change to run the JavaScript Code, affected elements are always set to "Items" (mandatory). I need to change manually all the time in the 'Selection' - value.

  I filed a feature of development of ease of use to automatically set the "selection" Type drain if action is replaced by "Execute JavaScript" and no article (s) selection has been specified before.

  Please let us know!

  Concerning

  Patrick

• Customize the function error text

  Hello.

  Our client asked that we try to change the text that is displayed when the error function is triggered.

  They want us to call the value of another attribute in the error text.

  For example, if the error was displaying what value 1 = value 2

  The rule would be something like:

  Error ("' you entered a value that corresponds to a value of 1: < called attribute of the amount of the value of 1 >" ") if

  Value 1 = value 2

  I think that it is probably not possible (as the text of error in this function seems to be inert - just display whatever it is defined as normal text).

  But I thought I should ask (on the off chance that someone has some kind of genius to do).

  Any ideas would be very appreciated.

  See you soon,.

  Monique.

  Hi Monique,

  Before I could analyze any solution, I wanted just to confirm if the attribute values as you compare it to display the error message are collected on any screen before the screen where you want to display this error.

  If the answer to this question is YES - to do a bit of event handler and a separate attribute to display the error message of piece - ")"). "

  So, we can use a separate attribute, which would take the part above the error message based on a rule:

  As if the value 1 = value2,

  then error_attr = "no specific amount.

  then us would require a little model VM coding that would hold the static part of the error message is ").

• Error trying to recover the ORA-12154 error text

  Hi all
  
  We want SETTING using ad module OBIA 7964 Finance. As part of have installed us Informatica 9.0.1 in our Linux x 86-64-bit server machine. And in the same machine, we installed a 11.2.0.1.0 oracle client.
  
  And we install Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production in another linux server.
  
  Now the question while trying to create a service of Informatica repository we get the error
  
  2013-04-25 12:52:38: ERROR: (7899 | 140669883090720): (RS |) (BIAPPS_DEV): node01_haidcobidev01: OBJM_54538: unable to connect to the repository BIAPPS_DEV to the orcl database.
  2013-04-25 12:52:38: ERROR: (7899 | 140669883090720): (RS |) (BIAPPS_DEV): node01_haidcobidev01: REP_51002: could not connect to the database server
  Database driver error...
  Function name: logon
  Error trying to recover the ORA-12154 error text
  
  Database driver error...
  Function name: connect
  Database error: unable to connect to the database using the [lower] user and the connection string [orcl]
  
  Please let us know is there something missing as part of the Setup and let us know how to solve this problem.
  
  Thank you
  Dany

  Who is the owner of this post?
  Looks like 2 different people possess!

  What link if you guys pass, try something like
  HostName: port / serviceName

• VALIDATION - function returns the error text

  I have a domain that occurs on about 12 pages, I need to post this field with some code
  
  I created a function on the database that performs this validation, I pass the field value to the function and it returns some text of error, or NULL if the value is correct
  
  I can't for the life of figure me out how to call the function of APEX
  
  I've tried everything
  
  FUNCTION RETURN ERROR TEXT, Expression SQL, PL/SQL Expression... nothing works!
  
  to call the function my comand is
  
  FN_VALIDATE_HR1_REF (: P1_GCI,: P1_HR1_REF);
  
  I want to return the error on the function text and display it in the banner of APEX error
  
  any help greatly appreciated

  A function like this return error text should work:

  Return (FN_VALIDATE_HR1_REF (: P1_GCI,: P1_HR1_REF));

  Is giving the error?

• Looking for an example of "function that returns the error text.

  Environment: APEX 3.1.1.00.09 on AIX 5.3
  
  I'm looking for an example implementation of the posting of the "function that returns the error text.
  
  I would like to write a database function that does the validation logic and return the text of the error.
  
  Is it possible to create multiple lines of text of error based on error conditions?
  
  I'm trying to use it at the end of the input data to go on the set of the 'document' to the entry and highlight all error conditions encountered before the 'document' is subject to additional processing.
  
  I wrote the function and reference it in a posting as ' validate_stuff (: P3_DOC_SEQ); »
  
  I have an error message "validate_stuff is not a procedure or is not defined.
  
  The object is a function, not a procedure. It is defined to return a parameter VARCHAR2 hoped posting if it is not NULL.
  
  When I run the SQL function * more and spend in a number of documents are returned the correct error messages.
  
  Any direction is greatly appreciated.
  
  -gary

  Hi Gary,.

  You must RETURN the result of the function:

  BEGIN
   RETURN validate_stuff(:P3_DOC_SEQ);
  END;
  

  Andy

• Too much to ask and get a "stack on error of flow.

  I have AS3 create 12 random var (actuelle1, play2, etc.) and then I ask him on average the 12 vars (number) until I get a specific average number. When I run the present in AS2, I get the question "script runtime error, continue to operate? I told him to run, and AS2 finally found the right set of 12 numbers to match a specific average number. In AS3, I get a "stack on error of flow. I know that all my AS3 swf need it's just more time to find.

  Any ideas for a fix?

  This is one of the possible approaches you can use. The following code generates a table of average values is what you set. Also note that you can change all the settings and generate any number of values with any means. Just stick to the timeline of the rocker and look at what is happening. I commented a few important points in the code:

  // required average
  var avgNum:Number = 10;
  // number of values to generate
  var numOfValues:int = 12;
  // set of generated numbers
  var numbersSet:Array = [];
  
  generateNumbers();
  // generates vlaues based on the settings
  function generateNumbers():void {
       var sum:Number = avgNum * numOfValues;
       var currentNumber:Number = 0;
       for (var i:int = 0; i < numOfValues; i++)
       {
            currentNumber = sum * Math.random();
            numbersSet.push(currentNumber);
            sum -= currentNumber;
       }
       // difference between required sum of all the values
       // and sum of numbers that are generated
       var dif:Number = numOfValues * avgNum - arraySum(numbersSet);
       trace(dif);
       trace(numbersSet);
       trace(arraySum(numbersSet));
       distributeDifference(numbersSet, dif);
       trace(arraySum(numbersSet));
       trace(numbersSet);
  }
  // adds fraction fo difference to all array memebers
  function distributeDifference(a:Array, dif:Number):void {
       // fraction to distribute
       var fraction:Number = dif / a.length;
       for (var i:int = 0; i < a.length; i++)
       {
            a[i] = a[i] + fraction;
       }
  }
  // sums up array members
  function arraySum(a:Array):Number {
       var sum:Number = 0;
       for (var i:int = 0; i < a.length; i++)
       {
            sum += a[i];
       }
       return sum;
  }
  

• -Error ORA-00932: inconsistent data types: expected TANK got the NUMBER

  Here is my report query...
  

  select 
  *
  from   DW_RFA_JOBDATA
  where  FINISH_TIME >= :P1_START_DATE 
  and FINISH_TIME < :P1_END_DATE
       AND RFA_FLAG = (CASE :P1_JOB_CLASSIFICATION WHEN '0' THEN 'LSF'
                                    WHEN '1' THEN 'NON-LSF' 
                                    ELSE RFA_FLAG END)

  The column data type RFA_FLAG is NUMBER(*,0)... I'm view RSA and RSA - not the area of selection, but I get the error ORA-00932: inconsistent data types: expected TANK got the NUMBER >
  
  I have created a static LOV with LST display 0 return
  Display NON - RSA 1 return...
  
  Could any body please help me in truble shooting error? How to to convert the data type to number, I have no privileges to make changes to the table...

  Mark you my previous answer as correct? (MOST POINTS!  :))

• Error ORA-00932: inconsistent data types

  Hello world
  
  I'm having a small problem with the error ORA-00932: inconsistent data types. The code below is what I'm working on. The error is on line 12:
  "vStmt: = ' select DDH_HOST_NM, DDH_SCHEMA_NR from ' | '. vSchema |'. < table > @ < DB_LINK > '; ». This is because DDH_HOST_NM is a VARCHAR2 and DDH_SCHEMA_NR a number.
  
  I know what is the error and where it is but I can't work on how to solve this problem. I tried to use to_char on DDH_SCHEMA_NR but that does not.
  
  Anyone have an idea how I can fix this problem?
  
  Thank you
  N.S.N.O.
  
  DECLARE
  vSchema varchar2 (1000);
  vStmt varchar2 (1000);
  Version number (38);
  CURSOR c_schemas IS
  Select "< SCHEMA-NAME >" as "< scheme name >" twice;
  BEGIN
  Open c_schemas;
  LOOP
  SEEK c_schemas INTO vSchema;
  EXIT WHEN c_schemas % NOTFOUND;
  vStmt: = ' select DDH_HOST_NM, DDH_SCHEMA_NR from ' | vSchema |'. < table > @ < DB_LINK > ';
  Run immediately vStmt in version;
  dbms_output.put_line(vSchema||) e '|| Version);
  END LOOP;
  CLOSE C_schemas;
  END;

  The problem is that you choose 2 columns in a single variable?

  vStmt: = ' select DDH_HOST_NM, DDH_SCHEMA_NR from ' | vSchema |'.

  @';
  Run immediately vStmt in version ;

  This must be either

  vStmt: = ' select DDH_SCHEMA_NR from ' | vSchema |'.

  @';
  Run immediately vStmt in version;

  or

  vStmt: = ' select DDH_HOST_NM, DDH_SCHEMA_NR from ' | vSchema |'.

  @';
  Run immediately vStmt in vHostNm, version;

  where vHostNm should set as a variable too.

• Error: Text flow inconsistency in text U10174 breakpoint 960px

  Hello, after the last update ist here the error (error: inconsistent text flow in the block of text U10174 breakpoint 960px) to everything I do. The program will be closed.

  Can anyone help? Newinstall doesn´t solve the problem.

  Regards, martin

  Hola Beatriz

  The provisional respond (available Adobe Muse CC 2015.2):

  1 Abra el diálogo cuadro "edición > Ortografia > dictionary del usuario.

  2 Haga click in el boton "Hecho" con las using shift + command (Mac) o Shift + Ctrl (Windows) to stays presionada.

  (Soluciona incompatibilidad, pero el formato text Esto para rotura puntos to be haber perdido)

  3 Abra 'MuseLog.txt' archivo vidéoconférence "documents."

  4. messages como Espera "fixed text model inconsistency in the block of text with the text... page... to the impossible...» »

  5. in Adobe Muse, volver a manualmente el formato text apply para text / especificados in estos messages rotura puntos

  Abhishek

• error message: "p incompatible a number of children through breakpoints as part of text U69846.

  I have an error message when I try to download my muse on businesscatalyst site.

  The error message says:

  'p incompatible a number of children through the breakpoints as part of text U69846.'

  What it means? How can I solve it?

  I need urgently to know how because I have to publish my site as soon as possible.

  Thank you.

  Hi Mattia,

  Please see my response dated February 23, 2016 09:39 bymistake with inconsistent across breakpoints children

  If you are using the latest version of Muse, you can check the MuseLog.txt file in your Documents folder. It has a log message that indicates what text frame has the inconsistency.

  If this does not help, please send us the Muse file to [email protected] for investigation and provide a link to this thread for the context. If the file is larger than 20 MB, you can use a service like Dropbox, creative cloud, WeTransfer, file sharing.

  Abhishek

• Display error text

  Hello

  I created in a Labview Vi - an error that is returned to teststand.

  Only the black part to the first line is the error message that I set.

  But: Where is the text in the part marked in red coming from? It is not from labview?

  Thanks for the ideas

  Hello

  When a VI returns an error within the cluster of error, labview will Fill-in or add to the text of msg a few significant words found in the default error code base. Somewhere in VI properties-> performance you can disable the error handling auto, in which case the VI will return only the text defined in the chain of Error Msg. If its values of 5000, it is where the user-defined error codes starter. See LabVIEW help on how to enter text and defined error codes by the user.

  So if you return the error code 1 will probably be a text such as

  "An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @. »

  combined with

  "Command requires GPIB controller charge controller. This error occurs when the Council is not the controller in Charge any level map function requiring a capacity of controller is called or when any function at the level of the device that affects the GPIB is called and the driver cannot do the the Chief Controller Board. »

  error code 0, you might see;

  "Connection to the device or driver error. This error can be caused by the inability to find or open the GPIB device driver correctly. »

  I hope this helps

• Book module: error text/fonts when recording

  Get an error while downloading them on Blurb or save as PDF on the desktop.  The error indicates a "textual error and the police ' everything and save the project in two places.  No choice, just don't give up.  Lightroom continues, but I can't successfully download on Blurb or save as PDF in Lightroom.  LR 5.7.1 on a PC with16GB of ram and 500 GB available storage on my HDD.

  My project is over 170 pages of images and text on the cover (with an image), the back cover (with a picture) and the last page of the book that was entirely text.  All used at different sizes of Arial text and that doesn't seem to affect the problem.  Neither the presence of text on the front and the back and the spine.  After scanning below the Forum I came across a question of I_AmTaterBug 13 Sep 2013 16:01 with the same problem.  After looking through the suggestions I tried to change fonts (without success) and finally replaced the one and only one page of text (the last page) and replaced by one that had an image and text.  I lifted the text on the previous page and pasted in the text portion of the new page.  Then I added an image to the other side of the page and retested.  Voila... no problem!  Maybe it was the last single page of text, but for some reason, he ran in PDF format and then upload to Blurb.

• Conversion error {text] text}

  Definition of the problem:

  I use ADF entity object bound to a SQL Server (sorry) Microsoft database. The entity is bound to a field with the type SQL Server to "text". I can create the entity using the Wizard object to create the tables, and I can drag and drop the object entity created on an input form of the ADF on my ADF Page without error. (I noticed that the ADF creates a default data type: TEXT in XML format when it creates the Entity object).

  The problem occurs when I try to insert a record in the form of the ADF using CreateInsert method binding. I get a validation error in the page when I try to commit the insert that says: "cannot convert 'everything I saw in the inputText control' of the class type java.lang.String text.»

  Anyone have any ideas on how to overcome this problem?

  I'm under JDeveloper 12.1.2.0.0.

  Thank you

  Nigel

  Good,

  I have corrected the problem. It was really simple, so thanks to Timo for pointing me in the right direction. I didn't change the EntityObjects type for the text field of the wizard generated {com.foo}. Type of TEXT to the string. It's as simple as that.

  Nigel