HP Envy 17 Notebook PC: Is it a default setting for the fan to be constantly on?

Similar Questions

• HP Envy 17 t: what size usb drive is necessary for the recovery of HP Envy 17 t 10 (64-bit) Windows?

  I just installed my HP Envy and wanted to set up a recovery disk.  The USB key must be less than 32gigs, but the example has not been updated for Windows 10 the instructions say.  It shows a recovery screen for a laptop of Win8 with the source of recovery like 17 concerts.   Is there a way to check the requirements for the front to accept the HP one time recovery option.  I have a new 16 GB USB key and wanted to make sure that it is large enough.

  Also do a backup image to DVD?   If so, how many DVDs?   The laptop is new and I added only Chrome and some minor programs.  My data files are always on an external hard drive.

  Hello

  Thanks for posting in the Forum from HP Support.

  To be honest, I don't know what size will be that these recovery files are because they can vary from the version of Windows to another. They can vary from a model.

  In my opinion, 16 GB is probably not enough.

  DVDs are usually 6 (6x4.7 GB = about 28 GB) but this can vary from one model.

  This possibility of imbedding maybe once, there are other ways that you can save your system indefinitely.

  This is a free option included in all windows (creating system image, it's free as included in Vista from the outset).

  http://support.HP.com/us-en/document/c03544793

  However, this option requires (e.g. USB HDD) external HARD disk or DVD. It does not work with USB flash drives.

• Hello. How can I set a position of default return for the façade of an Envy 100 AIO?

  Hello.. I was wondering if it is possible to adjust the position of the back to the front panel on my Envy 100 AIO once a page has printed and withdrew the output tray.  THX

  Hello

  There is no adjustment to make, but there is a firmware update that should fix this. The firmware update will make the display to go back in the correct position. You can download from the unit by going into the Setup menu, find the Web menu and go from there, choose "Search for updates".

• Envy 17 Notebook PC E0K85UA #A: reset of password for BIOS

  I put my password in the BIOS using special characters.  (ie. xxxx % ^ % &)

  Long story short, I can't return to my computer.

  How can I reset my password for the BIOS boot?

  Product: E0K85UA #ABA

  Model: 17-j013cl

  Thanks in advance!

  Hello

  Enter the BIOS password incorrectly 3 times and it will generate an error code or system stop the code. Once the code is generate, use the link below to generate the reset code

  http://BIOS-PW.org/

  1. use the unlock code you generated to enter BIOS

  2 disable all passwords that are enabled in the Security menu of BIOS.

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

• HP envy m7-j120dx what ram, ssd drive will work for the upgrade.

  HP envy m7-j120dx. I would add a ssd and ram to the complete 16gig. any suggestions on what is my best bet for each of these products. No matter who else makes these? I looked online and can barely find anything about these except for comments.

  It's because it's so new. Here is the Service Manual:

  Manual

  Page 41-44. He held actually two hard drives.

  The memory is SO-DIMM DDR3L-1600. The 'L' is important. 1.35 volts not 1.5 volt.

  http://www.crucial.com/store/ListParts.aspx?model=envy%20TouchSmart%20m7-j120dx

  There is the memory you need at the highest and also a decent SSD. In order to give the best advice that I need to know your SSD budget. We can also help with migration/installation of the software. Keep the existing as a second disk drive and use the SSD for a boot drive. If you need the second cart/cable drive we can connect to that, too.

  If it's 'the Answer' please click on 'Accept as Solution' tp help others find it.

• HP Envy 700-500z: Question about wi - fi antenna tower for the wi - fi signal booster

  Hello

  I bought a wi - fi turn antenna to boost my wireless signal so I can use my Tablet outdoors during the summer.  The instructions provided with the said Tower if the computer has built in wi - fi or wireless card, do not install the antenna tower software becauce it could cause a conflict.

  It was suggested to me that I could either turn off the card go in BIOS or go to network and sharing Center and change the settings of the map, right click on wireless icon, select Disable.  In this way, I could safely install the antenna tower software and use antennas to boost my wireless signal.

  I live in the mountains of NE PA, in a pretty remote area.  'Hot spots' are so rare.  I have no Internet DSL but the signal is not strong enough to reach my Tablet if I should be on the outside.  Even in one of the rooms, the signal is not all that strong.  So it would be great help for me, if I could push my wi - fi at least in the immediate area outside my house.

  Could someone tell me if the network settings can be sure to do, or I would return just the antenna of the tower.  I will not go into the BIOS because I fear of seriously harming my computer by doing this.  But a simple change in network settings, I'm pretty confident that I could.

  Thank you

  Sandra Knapp

  Hello Dave,

  Yes, I suppose I could do that, last spring, they have installed a new router and told me that he would have a stronger signal for wi - fi, but it did not help me using my Tablet out on the patio at all.  I couldn't get a signal here, nothing at all.  So I have a feeling they don't have anything stronger, but I could ask.

  Thank you for suggesting that.

  Sandie

• HP ENVY 17 Notebook PC: Memory installed in the new HP envy 17 t

  Software HP Support Assistant displays Kingston 8 GB 1600 MHz memory installed on my HP ENVY 17 Notebook PC. Equals this Kingston memory installed the Kingston 8 GB 204-pin DDR3 SO-DIMM DDR3 1600 (PC3 12800) computer laptop memory model KVR16LS11/8 I intend to buy to upgrade my Envy 17 and 16 GBs?

  Yes, that's the correct stuff. The Kingston can operate at 1.35 or 1.5 volt. Before the upgrade, although I advise you, you remove the RAM that is in it and watch it. Is - this 4 black memory per side or 8? Match what you have.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP envy 15 touchsmart whistling noise from the fan

  Hello
  I have a hp envy 15 touchsmart j101tx. My problem is that whenever the fan is on, a hissing sound comes from the laptop. The sound is quite loud and very annoying when the fan is at full speed. After some time I realized that the noise is caused by a white cable passing over the fan when the air passes through. Can you suggest a solution for this because the noise is very annoying, especially in the office

  Hi @Nobert_01

  I understand that you are having problems with the noise of the fan, apparently due to a cable that seems out of place or friction. I'm happy to help you.

  Because the sound seems to be caused by the cable rubbing against the fan, one solution might be to try to adjust its position. To this end, here is the: PC portable HP ENVY 15 and HP ENVY TouchSmart 15 Notebook PC Maintenance and Service of Guide

  It provides instructions for disassembly, and if you want you can try to fix them carefully as cable companies so is no longer in contact with the fan.

  I hope this helps.

• Windows 7 drivers for the TouchSmart from HP ENVY 15-j002eo

  Hello!

  The company I work for just bought a TouchSmart from HP ENVY 15-j002eo. It's the first of this model and it came with Windows 8 is installed. Problem is that we use Windows 7 as standard and Deploying via sccm 2012. According to the HP support site this computer does not have drivers for Windows 7, but I decided to try it anyway.
  

  The computer came with all the required drivers for Windows 8, almost all of them worked except two things...

  That's what I left in the device manager that I failed the difficulty:

  (USB) Universal Serial Bus controller

  Hardware ID:
  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1967103C & REV_04
  PCI\VEN_8086 & DEV_8C31 & SUBSYS_1967103C
  PCI\VEN_8086 & DEV_8C31 & CC_0C0330
  PCI\VEN_8086 & DEV_8C31 & CC_0C03

  Unknown device

  Hardware ID:
  ACPI\HPQ6007
  * HPQ6007

  I have treid everyting I could think... Could someone help me this?

  Hello

  Is this the same post?

  http://www.sweclockers.com/Forum/67-Barbara-datorer-support-och-ovriga-tradar/1241326-drivrutiner-till-HP-envy-TouchSmart-15-j002eo-Windows-7-a/#post13929165

  For the second, copy the following driver:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117749-1&cc=us&DLC=en&LC=en&OS=4132&product=5395193&sw_lang

  And may be the next driver to the first:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=21129

  Good luck.

• HP ENVY 17 Notebook PC: Unlock BIOS

  Because im going to install ubuntu alongside windows 15.04, I need to disable secure boot. I go and I find that I can not change a lot. I did a little research and discovered that you have to "unlock" your BIOS. How can I do this?

  OS: 8.1 64-bit Windows

  PC: HP ENVY 17 Notebook PC

  BIOS: Insyde F.65, 2014-11-20

  RAM: 8 GB

  Processor: Intel Core i7-4700MQ @ 2.40 GHZ

  BIOS mode: UEFI

  SMBIOS version: 2.7

  NVM, I solved it don't answer.

• HP Envy 17 Notebook 3002ea - need to add more MEMORY...

  Hello

  I have a HP Envy 17 laptop 3002ea (number of product A2Q36EA #ABU) with the following characteristics:

  HP ENVY 17 Notebook PC model system
  System Type x 64-based PC
  Processor Intel Core i7-2670QM 2.20 GHz, 2201 Mhz, 4 Lossnay, 8 logical processors
  Hewlett-Packard Version / Date BIOS F.08, 11/07/2012
  SMBIOS Version 2.7
  Physical memory (RAM) installed 8.00 GB
  7.95 GB total physical memory
  4.66 GB available physical memory
  15.9 GB total virtual memory
  10.8 GB available virtual memory

  I want to add more RAM, preferably another 8 GB (I use the laptop for work in post production, animation, editing the videos etc.). Please could someone advise me:

  WHAT should I buy?

  WHERE I can buy it?

  HOW to add in my laptop / install it?

  I am a complete novice when it comes to laptops!

  Thanks x

  Hello

  Unfortunately, 8Gb is the maximum ram (IE 2 x 4 GB modules) which can be installed in the machine - I have used the same model exactly myself.

  This can also be confirmed on the following link.

  http://www.crucial.com/UK/store/listparts.aspx?model=envy%2017-3002ea & cat = RAM

  Best regards

  DP - K

• HP envy 17 notebook pc: start password necessary admin

  Need bios admin password for the following:

  HP envy 17 notebook pc

  Product #G0U21AV

  System disabled: 76480512

  Please help

  @chammin00

  Please enter:

  69588534

  Kind regards.

• HP Envy 15 Notebook PC TS: Problem sound Intermittent HP Envy 15 TS / Windows 8.1

  Specifications of the computer:

  HP Envy 15 Notebook PC TS

  Product # E1P05AV

  8.1 Windows 64-bit

  Intel Core i7-4700MQ CPU @ 2.40 GHz

  2 x 8 GB of RAM

  Map of KBC Version 93.52 system 1963

  Graphics device 1: NVIDIA GeForce GT M 740 V.10.18.13.5435

  Graphics device 2: Intel Graphics HD 4600 V.10.18.10.3304

  Audio: IDT High Def Audio CODEC / pilot: stwrt64.sys V.6.10.6491.0

  Question: In the past months, my sound will go off randomly automatically.  If I close the lid and let the computer in to sleep mode or if I restart the computer, the sound comes back.  When the sound disappeared, the volume buttons on the keyboard, so to work with a lag and the mute on the keyboard does not work.  Try to use the sound test, or even navigate the tabs in the Properties section of speaker to accuse also considerably by the sound does not work.

  I noticed other things: I was watching a youtube video when the sound came out, I left the chrome tab that I used for the video and the sound comes back a few seconds later.  He then disappeared a few seconds after I opened a new tab and returned to watch the video.  I had also the same thing happens with the help of a video editing software - quit the application, sound came back, returned to the software, sound went out after a few seconds.  I also had both sound back after going to the speaker properties - Advanced tab and switch format, by selecting the test button and clicking on OK when a message saying "the sound system is in use, taking the test can cause the application to fail" (or something similar).

  I tried to use various utilities for troubleshooting when the problem occurs - the find and troubleshooting audio fix is no problem AND the device is listed as working properly in Device Manager.  I've uninstalled and reinstalled the latest drivers for the IDT HD Audio CODEC several times - no help.  In addition, the problem has been resolved not when I converted briefly to Windows (back to windows 8.1) 10.  In addition, I tried to use the other pilot of "High definition Audio Device" in place and place of the IDT CODEC, but the same problem happened - sound turns off randomly until I rebooted or put my computer to sleep.

  I'm pretty computer - savy but I can't seem to understand what the problem is.  It doesn't seem to be a hardware problem or the sound would probably not come back so quickly or clearly as it does...

  One last piece of information: I noticed that the first time that I reinstalled the Windows audio 24/06/2015 - and also several updates were installed on the 23 & 24 June - watching these updates to see if they are the cause of the problem.

  My father had a speaker bluetooth for Christmas - I tried it out on my computer because it works completely independently of my sound card and it was working fine.

  I bought one of my own for $30 at target - Jam Classic Wireless Speaker - and now I have wonderful sound.

  Does not resolve the issue of the root, but the problem is solved!

  I'm just upset that HP gave me the such a card its crappy that it only lasted 1 1/2 years before give me questions, just long enough to ensure that the warranty expires...

• HP ENVY notebook - m7-n101dx: graphics card in replacement for laptop HP ENVY - m7-n101dx

  I have a

  HP ENVY notebook - m7-n101dx

  my graphics card appears to not follow very well on demanding games and I wouldn't mind buying a new card.

  I'm relatively unknowledgable on the compatabilities of these cards and how they work, but I want to know if its possible to replace the card for a more powerful version.

  Hello

  Unfortunately, you can not. Except for the preinstalled class and some gaming machines, we cannot upgrade graphics card on a normal laptop.

  Kind regards.

• HP ENVY 17 Notebook PC: Plugged not supported message when plugged AC

  When my HP ENVY 17 Notebook PC is connected, it is is no longer in charge, and the battery icon says "plugged in, not load."  I ran a best of battery using HP Support, and the message says "battery reports a failure and should be replaced as soon as possible... ».  My laptop is less than 3 months.

  This means that the subsystem of loading of the motherboard is ok.

  Had considered running a recovery to see if it would solve the issue?

  I would try that before you send it.

  Beforeyou send in warranty repair, you must really have everything you don't want stored on an external drive anyway.