Error "the component you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package ' status.msi.»
What is an installation package "status.msi", it doesn't let me access my command to scan on my HP officejetJ5780 all-in-one. It indicates that the component you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package ' status.msi. It's also prevents me to access my backup disk.
Original title: status.msi?
I restored my computer to a period of time, two weeks earlier and which seem to fix the problem, somehow. Thank you
Tags: Windows
Similar Questions
-
Made an upgrade of Windows 10 then was forced to return to Windows 7 because of the incompatibility of the driver. Noticed Adobe did not work. Tried to re-download the last but ended up with error captioned.
You may need to consult the below mentioned link doc KB and try the troubleshooting steps:
I would like to know if this helps in your case.
Kind regards
Ana Maria
-
Original title: Slverlight 5 update?
I try to install llatest update of silverlight, but get a message "the feature you are trying to use is on a network resource that is unavailable" I already uninstalled the previous version of silverlight, run an analysis of csm who said no problems. Can anyone help please
Hello
(1) you receive an error code?
(2) you are facing problems with the download of other updates?
See the link below:
How to clean a facility damaged Silverlight and then reinstall Silverlight
http://support.Microsoft.com/kb/2608523
Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows.
-
When I try to install java, I get this message:
The feature you are trying to use is on a network resource that is unavailable.
Installation source is not available.
I need 'jre1.6.0_20 - c'.msi Ow I get it.
Thank you
You have completelly wipe JAVA computer, so:
(1) download and install the utility Windows Install CleanUp. Microsoft collapsed to bear so a enter here:
http://www.Softpedia.com/get/security/secure-cleaning/Windows-Installer-Cleanup-utility.shtml
(2) run this utility and uninstall everything on JAVA (works fine even for other applications)
(3) manually remove HIDDEN directory C:\Documents and settings\your_username\application data\sun\java
(4) download and install the latest version of JAVA
BTW: folder jre1.6.0_20 - c.msi can be found on the following links, but it does´nt work in any case...
http://SDLC-ESD.Sun.com/ESD6/JSCDL/JRE/6u20-B74/JRE/jre1.6.0_20-c.msi
http://sunmicro.DL.llnw.NET/u/ESD6/JSCDL/JRE/6u20-B74/JRE/jre1.6.0_20-c.msi -
I used to get jump up while working on my system. Details of the pop up windows:
«Pl waiting windows configures media gallery»
If I have to cancel this once again it displays:
"The feature you are trying to use is on a network resource that is unavaialble.
-Click ok to try again or enter a different path to the folder that contains the installationpackage M.G. modulesX64.msi in the box below
-c:\users\admin~1\appdata\local\temp\{2ACCE2B2-D3EF-430A-B766-8EA930489CCE}\{DD88F979-FA58-41AC-980-A6E1A82B61D9}\
-An installation package for the product M.G. cannot be found. Try the installation again using a copy valid x 64 MSI installation package M.G. merge module.
I already uninstalled the program Gallery media still the problem persists.
Pl help.
original title: how to block pop-ups «pl waiting windows configures media gallery»
Hi Rajazc,
It seems that the location that the software will search in the installation file has changed or disappeared. You can follow this path that he needs? When you re-installed, did you use the same exact path? You completely uninstall before you try to reinstall? Try this: uninstall the software, do a clean boot, and then reinstall making sure that you set in a different way.
Here is a link that has a portico on the issue that you are running in (just another program) to watch what you deal with:
http://support.Microsoft.com/kb/828376
hope this helps,
B Eddie -
When I try and open Adobe or something like excel, word etc I get message from installer of windows that appears and says "the component you are trying to use is on a network unavailable resource. Click OK to try again or enter a different path to the folder that contains the package of facilities "Acro Stan.msi" in the box below. I have no idea how the problem
Original title: windows install message acrostan.msi
Hello
I suggest you to follow the steps and check if it helps.Method 1: Unregister and register the Windows Setup program again
(a) click Start, run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.
(b) click Start, click Run, type MSIEXEC/REGSERVER, and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.Method 2: Install Windows Installer 4.5 and check if it helps.
Windows Installer 4.5 is available -
Creative Cloud App told me to update Acrobat Pro DC. Did the update, agreed it would uninstall the current version before updating. Then during the actual update get this dialog box.
Adobe Acrobat DC
"The feature you are trying to use is on a network unavailable resource.
Click OK to try again or enter a different path to the folder containing the installation package ' AcroPro.msi. in the box below.
Use source:
C:\Users\Me\AppData\Local\Temp\{6BDAD507-E515-4573-B0D8-126CDDD22852}\Acrobat_11_0_0_CCM_M UI\Adobe CS7\payloads\AcrobatProfessional11.0-mul\'
Found this thread below, that is similar, as I restored from Windows 10 ago as well. But the solution - using cleaner does not help.
Installation failure Acrobat DC win post 10?
Hello
This link may help: error 1714. Acrobat, Reader
Kind regards
Sheena
-
How do we uninstall corel win dvd 2010... its saying the component you are trying to use is on a resource network that is not available
Hello
1. Why do you want to uninstall corel windvd 2010?
2. what exactly is the problem you are experiencing on the computer?3. what happens when you try to uninstall windvd 2010?If you are facing any problem with uninstalling then you can run the fix it and check.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/You can also try the steps from the link uninstall corel dvd and check.
http://Corel.force.com/index/articles/en_US/Master_Article/764253-how-to-manually-remove-Corel-WinDVD-2010-standard-or-Pro
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registryProvide us more information for you to help.
-
Can not install the latest version of iTunes. Everytime I try I get this error msg: "the component you are trying to use is on a network resource that is unavailable."
Then I click OK and get this msg: could not find the path C:\users\my name\appdata\local\apple\apple software update\itunes6464.msi.
I need to sync my new iPad pro and because used to synchronize requires the latest update, I have my laptop but I never have syncd my ipad with this computer and if I try to backup if I agree to erase everything on my device and sync with the laptop. Of course, I don't want to do what I want to see everything on the NEW ipad from the old version.
I went through the troubleshooting and found a solution, but when I had finished making all this trouble report said, there was a pesky itunes shortcut file on the left and I can not delete this shortcut, regardless of how many times I try. If I can't remove it, the Installation will be terminated. How can I delete this file?
For general advice, see troubleshooting problems with iTunes for Windows updates. Start by Missing MSI errors .
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
uninstall the feature you are trying to use is on a network resource
The feature you are trying to use is on a network resource
Who is unavailableThe installation source for this product is not available
-J' got this message when I try to change OR uninstall an applicationPlease help me ~
Try the Fixit in this similar case: [solved] the feature you are trying to use is on a network resource that is not available Java
-
I got the message about Windows Installer "the feature you are trying to use is on a resource not available network. Click Ok to try again or enter a different path to the folder that contains the NSR2.msi installation package in the box below. Can someone help me get rid of this? I'm unable to install other products or remove installed products or open some things installed such as Skype, etc. I tried restore to previous date
Hi Kayked,
· Do you remember all the recent changes on the computer before the show?
I suggest you try the steps listed in the link below and check out the results: how to solve the problems that may occur when you install, uninstall, or upgrade one program on a Windows computer: http://support.microsoft.com/kb/2438651
-
Original title: itunes
When I start to download itunes in the middle of the down load there is a box that appears and indicates:
The feature you are trying to use is on a network unavailable resource.
Click OK to try again or enter a different path to the folder containing the installation package 'iTunes.msi' in the box below.
Hey amysainteloi,
ITunes is already installed on the computer?
If so, remove all components previously installed on the computer, and then try to download a new copy of iTunes.
1. follow the steps in this article to uninstall iTunes completely from the computer:http://support.apple.com/kb/HT1923
2. retry download from iTunes: http://www.apple.com/itunes/download/
This should be it.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: trayapp
When I open the computer message appears, the component you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder that contains the installation packagr 'TrayApp.msi' in the box below.
C:\Users\user\AppData\Local\Temp\7zS5216\setup\TrayApp\
When I click ok the message this way that c:\users\user\appdata\local\temp\7zs5216\setup\trayapp\ is not found. Verfy that you have access to this location and try again or try to find the 'TrayApp.msi' in installing a package file from which you can install the product'TrayApp.
When I try to cancel the warning message, is that an installation package for the TrayApp product is not found. Again the installation again using a valid copy of the 'TrayApp of installation' package. I already uninstalled all HP products, but this message is still bothering me, how to solve this problem?Hey Tama,
-What version of windows is installed on the computer?
-Have there been recent changes to the computer before the show?I recommend you go through the next HP document and check if it helps.Hope this information is useful. -
I get the message "the feature you are trying to use is on an unavailable network resource" when you try to uninstall jre1.6.0_25 - c.msi I got the error message 1722 and error 1714. Went in circles, trying to understand this. I've exhausted all the options of my and have done everything I could find on the Java Web site. Please HELP someone have any suggestions?
original title: JAVA GRIEF
Hi Jennie,.
Check if you can uninstall Java by following the below mentioned article.
Error 1714. Cannot remove the old version of Java.
See also:
Error 1722. There is a problem with this Windows Installer package.
-
This error occur any where... it's like an installation of an update of the victory... "The feature you are trying to use is on a network resource that is unavailable, click ok to try again or enter a different path to the folder containing the installation package setup_vep_x64_contain_ssdb.msi in the box below."
and I have to click Cancel like 3 times...How can I fix?Hello
1 have had modifications made to your computer before the problem occurred?
2. when exactly you get this error message?
I suggest a few steps of troubleshooting section below and check if that help in the issue of the attachment on your computer.
Method:
Step 1:
How to solve problems when you install or uninstall programs on a Windows computer
http://support.Microsoft.com/kb/2438651
Step 2:
The computer in the boot and a test
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.
Important: n ' forget not the computer to start normal follow step 7 in the link.
Please provide us with additional information. So that we can help solve you the problem on your computer.
Hope this information helps you.
Maybe you are looking for
-
How can I return an app on the Mac App Store?
I bought an app and it turns out not to do what I expected. I thought he was going to block certain websites not apps in the mac.
-
Skype duplicate contacts and merge Outlook Contacts
Skype has just decided to synchronize my Skype contacts with my Outlook contacts, resulting in a gigantic mess. I would like to keep these two separate worlds, although there may be few people on both lists. Reason is that I consider my Outlook Conta
-
Network is there something wrong with spades to msn I can't enter the game
y at - it something wrong with the games of msn (Spades) that I can't get on line with.i can play other games like billiards but usually allow connect to Spades, why why why?
-
separate the issue of code update
Hello! An interesting LV 2011 feature is the ability to separate (detach) the compiled code of a VI, which is especially useful for version or source control (if you modify a VI that is called by one bunch of others, only that VI will appear as "modi
-
When I turned on my computer today gadgets sidebar (clock, calendar, weather, news, my security icons) appeared (right), but instead of being at the top of the desktop image, the bottom under the gadgets are like a transparent smoke gray. I can still