Error: "the duration of the video exceeds the maximum supported by the destination."

Similar Questions

• travel-vmhost error - the destination of the specified parameter expects a single value

  I run in an error using Move-VMHost under PowerCLI version 5.5 R2 Patch 1 and 5.8 Release 1.

  There are 6 clusters in the data center.  To the host of the virtual machine between 5 of the clusters that I can run successfully:

  Get-VMHost vmhostname | Moving-VMHost Destination 'NOMCLUSTER '.

  But one group in particular always fails when it is specified as destination of the error message:

  The specified parameter "Desintation" expects a single value, but your criteria of name "cluster6" corresponds to multiple values.

  The only way I can get this working is to do:

  Get-VMHost vmhostname | -Move Destination VMHost (get-cluster | where {$_.name - eq "cluster6"})

  How 'cluster6' could correspond to several cluster names?  Is this just a bug in PowerCLI?  I started using PowerCLI more recently and noticed that some cmdlets can be a bit odd (for example had a few other problems with Get-VMHostStorage and found others have had similar problems with it).  I use this process of moving part of a more automated deployment script.  Prefer to make it as efficient as possible without having to insert the extra if possible Get-Cluster command.

  The Destination parameter on the Move-VMHost cmdlet accepts any VIContainer, not only the clusters.

  I suspect it could VIContainer one another with the same name.

  What this does?

  Get-inventory-name 'cluster6 '.

• Error: The destination of the file is too large

  Original title: to transfer large

  I can not transfer a file because it indicates the destination of the file is too large, though even I have enough space on my USB drive

  How is your USB drive formatted (FAT-32 or NTFS).  If FAT - 32 there is a 4 GB limit on the size of the file it will transfer so no matter the amount of space you have on the USB key.  If you want to move this large files on the USB drive, you must convert the USB stick to NTFS.  Here's how: http://techblissonline.com/fat32-to-ntfs-conversion-in-windows-xp-or-vista/.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot read Psychonauts off Steam error - the game could not create the Direct3d device. Please make sure your video drivers are installed properly

  Original title: Running Win7 on Bootcamp. Error: The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I try to play Psychonauts out of steam. I am currently running Windows 7 via Bootcamp on my MacBook Pro 13-inch mid-2010. When I try to run the game, I get the message:

  The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I tried to update DirectX, and I tried to download the Nvidia drivers associated with my laptop model. How can I solve this problem?

  Thanks again for the help.

  I'm not familiar with Apple but I found this:

  http://support.Apple.com/downloads/#NVIDIA

  Except that it is what I have from NVIDIA:

  http://www.nvidia.com/object/notebook_drivers.html

  Previously, only the original beta for mobile graphics drivers were available on the NVIDIA site with manufacturers having full control and ownership of the final version.

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• WMC on Xbox 360 shows "video error: the files needed to display video are not installed...»

  Front when you use Windows 7 Xbox 360 everything has worked well.
  Upgrade to windows 8.  WMC can play programs recorded on PC, but when I try to play recorded shows with WMC of XBox 360, I get the following message

  "Video error: files needed to display video are not installed or not working not properly." "Please restart Media Center and or restart the computer.

  I don't have any codecs installed
  I tried regedit change suggested that for vista, does not work
  I tried the deactivation/activation of WMC on the PC, does not work
  Restart the PC does not work
  Restarting everything doesn't work

  had this error the other day, that it drove me crazy. You know what fixed it? Disable my firewall. For some reason, he decided to start blocking my xbox. I hope this helps.

• OGG-00241 error on MyKey3, Keyvalue key name exceeds the maximum length.

  Hello
  I test le GG encryption option.
  My the environment is extract (Windows) et Linux Replicat .
  J’ai set up a key encryptación 256 with KEYGEN utility in ENCKEYS file. Then extract le file I defined the option EncryptTrail Aes256 Mykey3 keyName .
  Le extraction process works well .
  But the process of replication ABEND with this error:
  ERROR OGG -00241 Error on MyKey3 name of the key , keyValue exceed le maximum length .
  
  
  I copy the file to server replicat ENCKEYS and located in the GG root directory.
  My version is:

  Oracle GoldenGate for Oracle delivery

  OGGCORE_11.2.1.0.1_PLATFORMS_120423.0230_FBO version 11.2.1.0.1

  Any idea on this issue?

  Thank you very much

  Arturo

  Hola,

  This problem has been resolved by converting the file ENCKEYS of back to the Linux format.

  Thank you

  Arturo

• no error message "no Modules compatible video Play.»  Upgrade to the latest display drivers"

  I have a dell studio XPS 435 MT with a Radeon HD 4670 and I'm not the first to initialize.  I had the software for a year or two but has just been implemented.  I get the error message "no Modules compatible video Play.»  Upgrade to the latest display drivers' I made sure I have the latest drivers but there is still no start.  Help, please!  Thanks, Jeffrey

  Please, start here: error 'Premiere Pro could not find capable video game modules | Start

  If this does not resolve the problem, then please report the exact version of the creation and the types of content you are editing.

• "Receive the error message" error: the i/o operation was abandoned because of a thread exit or an application request "synchronizing Audio to MP3 player

  Original title: Windows Media Player problem

  Media Player when I try to sync the audio of my MP3 player, a message appears "error: the i/o operation was abandoned because of a thread exit or an application request. -what it means and how can I solve this problem?

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Run the Fixit and check if it helps.

  Solve the problems of Windows Media Player video and other media or library

  Hope this information helps.

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows movie maker error - the file is not indexed and cannot be imported

  I have converted a quicktime in WMW clip, but when I try and import the video in windows movie maker, that it comes up with error the file is not indexed and cannot be imported? What does that mean?

  Try another converter.

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (6) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

• Windows 7 backup error "the backup completed, but some files were skipped - 0x8100002F."

  Original title: error on backup windows 7 files ignored

  Have used the backup of windows 7 with no problems for several years.

  Get this error now: "the backup completed, but some files were skipped - 0x8100002F"

  Log shows:

  Backup has encountered a problem during backup of the C:\Users\HOME\Pictures\2013-08-17 file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem during backup of the C:\Users\HOME\Pictures\2013-08-17-dup file. error: (the system cannot find the specified file. (0 x 80070002))

  Check my hard drive of the PC with windows Explorer & files above do not exist.

  Tried to change my backup settings to not have the folder of images on the home account backed up & still get the error. Store all of my photos on another account (admin account) so no need to save photos on the House.

  Please help to get rid of this annoying error.

  Hello
   
   
  This problem occurs if Windows backup ignores certain files when Windows Backup cannot find them. When you perform the backup there backup Documents, photos, music and videos through user libraries. So if Windows detects any changes in the path of the folder then the libraries do not recognize their unless you access the corresponding library via Windows Explorer.
  
  Please, try the steps in the Microsoft KB article and check if it helps.
  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7.
  http://support.Microsoft.com/kb/979281
   

  I hope this helps. If the problem persists, please answer, we will be happy to help you.

   
   

• Backup and restore error "the system does not have the specified path. (0 x 80070003) »

  Original title: Backup and restore SkyDrive errors

  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My Documents. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My music. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the file C:\WINDOWS\System32\config\systemprofile\SkyDrive\My photos. Error: (System does not find the specified path. (0 x 80070003))
  Backup has encountered a problem during backup of the C:\WINDOWS\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002))
  Backup has encountered a problem in videos C:\WINDOWS\System32\config\systemprofile\SkyDrive\My backup file. Error: (System does not find the specified path. (0 x 80070003))

  The above folders/files have been written not the system image.

  For my mistakes, I uninstalled skydrive and deleted the shortcut created in the bookmarks and folders moved to another location remove skydrive folder and re-run the backup and restore tool.

  Then everything worked well for me.

  Saved once installed skydrive...

• After effects error: the Photoshop file format error (- 1). (45: 35)

  After Effects worked PERFECTLY for me earlier today. Now, he won't cooperate.
  I only use AE to correct the colors and the rendering/export short sequences to use first or Final Cut...
  Im working with DNG that have been converted from MLV files, sequences (I use the video hack gross magic lantern on a 5 dm 3).

  
  Out of nowhere, whenever I try to import any DNG sequences, sequences of CR2, CR2 or DNG files, I get this error...

  After effects error: the Photoshop file format error (- 1). (45: 35)

  
  No matter which set of DNGS I open gives me error. Ive tried re-conversion of several files MLV (perhaps there were corrupt officials?) and their import again, but no luck.

  Ive tried uninstalling AE and re installation with no luck.
  I tried the updated Camera Raw to the latest version with no luck too. (Adobe - Adobe Camera Raw and DNG Converter: for Macintosh)

  
  Does anyone know why AE would simply stop working with my DNG sequences all of a sudden?
  It makes absolutely no sense to me.

  (Running on a macbook pro end 2013)

  Well, after 4 hours of trying to understand this point, I did.
  Including use of that Camera Raw 9.5 it won't work with AE. 9.1 will alone.
  Still doesn't explain why it has just stopped working in the first place well...

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.

• tried to re set now I can't get past a loading error "the proxy server refuses connections."

  I tried the "reset Firefox" button and now I can't get Firefox it loads. Get error "the proxy server refuses connections." I'm not on a LAN, just a computer at home, how can I fix?

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved