Error trying to build the cRIO RT application

Similar Questions

• I installed CS5 on macbook pro 10.9.4. I can't get the update to run to update the applications to the latest version. He said that there was an error trying to download the update and try again later.

  I installed CS5 on macbook pro 10.9.4. I can't get the update to run to update the applications to the latest version. He said that there was an error trying to download the update and try again later.

  update directly: http://www.adobe.com/downloads/updates/

• Boot Server 2008 64 bit error trying to load a 64-bit application...

  Hi all

  I'm under VMware Server 2.0 Build 128374, Windows 2003 operating system company on a Dell Precision 670 2 Dual Xeon 2.80 loan of 64 bit with 8 GB of RAM

  The VMware care state that you can run a 32-bit host operating system and the 64-bit operating systems. However, when attempting to start Windows Server 2008 64-bit the following error message is displayed "error trying to load a 64-bit application, but this processor is not compatiable with 64-bit mode.

  I missing something here or is a VT capable processor required?

  ~ Eric

  Hello.

  Yes, you will need to have a processor of VT capable (and active).

  Good luck!

• I have this error: error trying to validate the Winsock base providers, what should I do?

  I have a problem to connect to internet, even do I got excellent signal, it is always the same: network address acquisition. Check with network diagnostics, and then displays this error: error trying to validate the Winsock base providers. and suggest that you ask for help.  Can you give me a solution to this probem. Thank you very much.

  Click Start---> run---> type "cmd" in the Run dialog box, click on 'ok'. Type "netsh winsock reset" on the command line without the quotes and press ENTER. Leave the command prompt, restart your computer to see if it solves your problem.

  Good luck.

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Error trying to recover the ORA-12154 error text

  Hi all
  
  We want SETTING using ad module OBIA 7964 Finance. As part of have installed us Informatica 9.0.1 in our Linux x 86-64-bit server machine. And in the same machine, we installed a 11.2.0.1.0 oracle client.
  
  And we install Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production in another linux server.
  
  Now the question while trying to create a service of Informatica repository we get the error
  
  2013-04-25 12:52:38: ERROR: (7899 | 140669883090720): (RS |) (BIAPPS_DEV): node01_haidcobidev01: OBJM_54538: unable to connect to the repository BIAPPS_DEV to the orcl database.
  2013-04-25 12:52:38: ERROR: (7899 | 140669883090720): (RS |) (BIAPPS_DEV): node01_haidcobidev01: REP_51002: could not connect to the database server
  Database driver error...
  Function name: logon
  Error trying to recover the ORA-12154 error text
  
  Database driver error...
  Function name: connect
  Database error: unable to connect to the database using the [lower] user and the connection string [orcl]
  
  Please let us know is there something missing as part of the Setup and let us know how to solve this problem.
  
  Thank you
  Dany

  Who is the owner of this post?
  Looks like 2 different people possess!

  What link if you guys pass, try something like
  HostName: port / serviceName

• Error trying to deploy the application on the content of webcenter

  Hi, Im trying to deploy an application to webcenter content server, but I get the following error.

  Can someone help me?

  Weblogic Server Exception: weblogic.application. ModuleException: [HTTP:101216] Servlet: 'wcmInitServlet' failed by preloading at startup in a Web application: 'myapp'.

  Oracle.Stellent.WCM.common. LocalizedRuntimeException: oracle.stellent.wcm.client. ApplicationException: application initialization error

  to oracle.stellent.wcm.javaee. ServletApplicationFactory. createInstance (ServletApplicationFactory. ) java: 72)

  to oracle.stellent.wcm.javaee. ServletHelper. initializeApplication (ServletHelper.java:192)

  to oracle.stellent.wcm.javaee. servlet.filter. WCMInitializeServlet.init (WCMInitializeServlet.java:43)

  to javax.servlet.GenericServlet. Init(GenericServlet.Java:241)

  to weblogic.servlet.internal. StubSecurityHelper$ ServletInitAction.run (StubSecurityHelper.java:283)

  to weblogic.security.acl. internal. AuthenticatedSubject. doAs(AuthenticatedSubject. ) java: 321)

  to weblogic.security.service. SecurityManager.runAs (SecurityManager.java:120)

  to weblogic.servlet.internal. StubSecurityHelper. createServlet (StubSecurityHelper.java:64)

  to weblogic.servlet.internal. StubLifecycleHelper. createOneInstance (StubLifecycleHelper.java:58)

  to weblogic.servlet.internal. StubLifecycleHelper. < init > (StubLifecycleHelper.java:48)

  to weblogic.servlet.internal. ServletStubImpl. prepareServlet (ServletStubImpl.java:539)

  to weblogic.servlet.internal. WebAppServletContext. preloadServlet (WebAppServletContext.java:1981)

  to weblogic.servlet.internal. WebAppServletContext. loadServletsOnStartup (WebAppServletContext.java:1955)

  to weblogic.servlet.internal. WebAppServletContext. preloadResources (WebAppServletContext.java:1874)

  to weblogic.servlet.internal. WebAppServletContext.start (WebAppServletContext.java:3154)

  to weblogic.servlet.internal. WebAppModule.startContexts (WebAppModule.java:1518)

  to weblogic.servlet.internal. WebAppModule.start (WebAppModule.java:484)

  to weblogic.application.internal. the stream of . ModuleStateDriver$ 3.next (ModuleStateDriver.java:425)

  to weblogic.application.utils. StateMachineDriver.nextState (StateMachineDriver.java:52)

  to weblogic.application.internal. the stream of . ModuleStateDriver.start (ModuleStateDriver.java:119)

  to weblogic.application.internal. the stream of . ScopedModuleDriver.start (ScopedModuleDriver.java:200)

  to weblogic.application.internal. the stream of . ModuleListenerInvoker. start(ModuleListenerInvoker. ) java: 247)

  to weblogic.application.internal. the stream of . ModuleStateDriver$ 3.next (ModuleStateDriver.java:425)

  to weblogic.application.utils. StateMachineDriver.nextState (StateMachineDriver.java:52)

  to weblogic.application.internal. the stream of . ModuleStateDriver.start (ModuleStateDriver.java:119)

  to weblogic.application.internal. the stream of . StartModulesFlow. activate(StartModulesFlow. ) java: 27)

  to weblogic.application.internal. BaseDeployment$ 2. next (BaseDeployment.java:671)

  to weblogic.application.utils. StateMachineDriver.nextState (StateMachineDriver.java:52)

  to weblogic.application.internal. BaseDeployment.activate (BaseDeployment.java:212)

  to weblogic.application.internal. EarDeployment.activate (EarDeployment.java:59)

  to weblogic.application.internal. DeploymentStateChecker. Activate (DeploymentStateChecker.java:161)

  to weblogic.deploy.internal. targetserver. AppContainerInvoker.activate (AppContainerInvoker.java:79)

  to weblogic.deploy.internal. TargetServer.operations. AbstractOperation.activate (AbstractOperation.java:569)

  to weblogic.deploy.internal. TargetServer.operations. ActivateOperation. activateDeployment (ActivateOperation.java:150)

  to weblogic.deploy.internal. TargetServer.operations. ActivateOperation.doCommit (ActivateOperation.java:116)

  to weblogic.deploy.internal. TargetServer.operations. AbstractOperation.commit (AbstractOperation.java:323)

  to weblogic.deploy.internal. targetserver. DeploymentManager. handleDeploymentCommit (DeploymentManager.java:844)

  to weblogic.deploy.internal. targetserver. DeploymentManager. activateDeploymentList (DeploymentManager.java:1253)

  to weblogic.deploy.internal. targetserver. DeploymentManager. handleCommit (DeploymentManager.java:440)

  to weblogic.deploy.internal. targetserver. DeploymentServiceDispatcher. validation (DeploymentServiceDispatcher. ) java: 163)

  to weblogic.deploy.service. internal.TargetServer. DeploymentReceiverCallbackDeli verer.doCommitCallback (DeploymentReceiverCallbackDeliverer.java:195)

  to weblogic.deploy.service. internal.TargetServer. DeploymentReceiverCallbackDeli verer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)

  to weblogic.deploy.service. internal.TargetServer. DeploymentReceiverCallbackDeli humour$ 2.run (DeploymentReceiverCallbackDeliverer.java:68)

  to weblogic.work. SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl. ) java: 545)

  to weblogic.work.ExecuteThread. run (ExecuteThread.java:256)

  to weblogic.work.ExecuteThread. Run(ExecuteThread.Java:221)

  Caused by: oracle.stellent.wcm.client. ApplicationException: application initialization error

  to oracle.stellent.wcm.client. ClientApplication.initialize (ClientApplication.java:316)

  to oracle.stellent.wcm.javaee. . ServletClientApplication < init > (ServletClientApplication.java:54)

  to oracle.stellent.wcm.javaee. ServletApplicationFactory. createInstance (ServletApplicationFactory. ) java: 61)

  ... more than 45

  Caused by: oracle.stellent.ridc. IdcClientException: Content Server not found "SSXARunTime" function

  to oracle.stellent.wcm.core.idc. IdcClientFactory. validateConfiguration (IdcClientFactory.java:166)

  to oracle.stellent.wcm.client. ClientApplication.initialize (ClientApplication.java:267)

  ... more than 47

  Caused by: oracle.stellent.ridc.protocol. ProtocolException: failed to initialize the idc connection: / / myserverip:4444

  to oracle.stellent.ridc.protocol. intradoc.Socket. SocketConnectionManager. initializeConnection (SocketConnectionManager.java:35)

  to oracle.stellent.ridc.protocol. intradoc.Socket. SocketConnectionManager. initializeConnection (SocketConnectionManager.java:22)

  to oracle.stellent.ridc.protocol. impl. SimpleConnectionPool. acquireConnection (SimpleConnectionPool.java:44)

  to oracle.stellent.ridc. IdcClient.sendRequest (IdcClient.java:151)

  to oracle.stellent.wcm.core.idc. AbstractIdcApi.executeService (AbstractIdcApi.java:163)

  to oracle.stellent.wcm.core.idc. impl. AdminApi.runTimeConnect (AdminApi.java:48)

  to oracle.stellent.wcm.core.idc. IdcClientFactory. validateConfiguration (IdcClientFactory.java:148)

  ... more than 48

  Caused by: oracle.stellent.ridc.protocol. ProtocolException: java.net.ConnectException: Connection timed out: connect

  to oracle.stellent.ridc.protocol. intradoc.Socket. SocketConnection.connect (SocketConnection.java:52)

  to oracle.stellent.ridc.protocol. intradoc.Socket. SocketConnectionManager. initializeConnection (SocketConnectionManager.java:33)

  ... more than 54

  Caused by: java.net.ConnectException: Connection timed out: connect

  to java.net. DualStackPlainSocketImpl. connect0(Native Method)

  to java.net. DualStackPlainSocketImpl. socketConnect (DualStackPlainSocketImpl.java:79)

  to java.net. AbstractPlainSocketImpl. doConnect (AbstractPlainSocketImpl.java:339)

  to java.net. AbstractPlainSocketImpl. connectToAddress (AbstractPlainSocketImpl.java:200)

  to java.net. AbstractPlainSocketImpl. Connect (AbstractPlainSocketImpl.java:182)

  impossible. Connect (PlainSocketImpl.java:172)

  to java.net.SocksSocketImpl. Connect (SocksSocketImpl.java:392)

  to java.net.Socket.connect (Socket.java:579)

  to java.net.Socket.connect (Socket.java:528)

  at java.net.Socket. < init >(Socket. ) java: 425)

  at java.net.Socket. < init >(Socket. ) java: 208)

  to oracle.stellent.ridc.protocol. intradoc.Socket. SocketConnection.createSocket (SocketConnection.java:126)

  to oracle.stellent.ridc.protocol. intradoc.Socket. SocketConnection.connect (SocketConnection.java:44)

  ... 55 more

  [09:35:12] caused by: java.lang.Throwable: substituted except oracle.stellent.wcm.client. ApplicationException, who is not a builder of the original - message application initialization error string

  [09:35:12] check the server logs or the console of the server for more details.

  Solved. You must clear the .ear, restart UCM, and then deploy the application again.

• A 0x8020002e error when I tried to update the pre-installed applications

  Original title: 0x8020002e

  Hi Microsoft supports,

  I met a 0x8020002e error when I tried to update the pre-installed in my laptop windows applications 8.

  There is no problem with my wifi connection as I can easily browse the web and download applications through internet.

  I tried to search for solutions on the web, but all suggested do not work.

  It is a common problem among all users of windows 8 and we really hope you can provide us with the fix.

  Thank you.

  Try this suggestion.

  Windows 8 Store Update 0x8024001E error code
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_cp-windows_store/Windows-8-store-update-error-code-0x8024001E/49820d2a-241e-471e-89F4-7b5440bb8abf

  The poster means Windows key + X when he mentions "Activate Windows + X and turn on the command line (Admin)".

  -What are you connected to a Local or a Microsoft Account account?

  Introduction to Windows 8: If you use a Local account or a Microsoft account?
  http://www.7tutorials.com/introducing-Windows-8-should-you-use-local-account-or-Microsoft-account

  See if the program can diagnose any problems and fix them.

  Download and run the troubleshooter modern UI App and check.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Try to clear the cache of Windows Store:

  On the screen, press Windows + R key to open the Run dialog box.

  Type WSReset.exe and press ENTER.

• Error trying to deploy the BPM soa server process

  Hello world

  straggling to solve this problem but my cause my of my inexperience on BPM is worse than I thought.

  Once JDev compiled the Bpm process without error and create the ProjectName.jpr., I tried to deployed the process on the server of soa, soa_infra partition.

  What I did:

  1. go on JDeveloper | The application browser.

  2. Select and right click on the project of BPM.

  3. the SCW deployment Action started

  4 fill in the fields and click OK

  I get this error:

  "

  [16: 35:38] error in deployment of archives sca_project_name_rev1.0.jar of partition on the server soa_server1

  [16: 35:38] HTTP error Code returned [500]

  [16: 35:38] Error Message from the server:

  There was a deployment of the composite on soa_server1 error: deployment failed: error occurred during deployment of the component: nameComponent to service engine: implementation.bpmn, for composites: Project_name: ORABPEL-05250

  Suitcase BPMN deployment by mistake.

  error when trying to deploy the BPMN component file ' / coretech/fmw11/user_projects/domains/svil_domain/servers/soa_server1/dc/soa_8918455e-2622-4261-acd1-6e281a82a0d9 "; the reported exception: java.lang.NullPointerException

  This error was an exception thrown by the underlying deployment module.

  Check the trace for the exception in the log (the connection value level debug mode).

  .

  [16: 35:38] check the log of the server for more details.

  [16: 35:38] error in deployment of archives sca_Project_name_rev1.0.jar of partition on the server soa_server1

  [16: 35:38] # incomplete deployment.  ####

  "

  Do you know why the deployment failed? The compilation was ok...

  Thanks for all the help you can give me.

  Fairlie

  Hello

  Suitcase BPMN deployment by mistake. java.lang.NullPointerException.

  This could be a variety of reasons:

  (1) my problem was solved when I checked the fabricruntime.jar for jdeveloper middleware House \jdeveloper\soa\modules\oracle.soa.fabric_11.1.1

  and SOA home Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1 was different. So I copy the fabricruntime.jar of soa on jdev House home and redeploy the composite and it works.

  My conclusions at that time was namespace error.

  (2) you can also apply the below patch

  Patch 14618452: NPE IS THROWN everything BY DEPLOYING a PROCESS WITH SEVERAL SUB-PROCESS/WRESTLING EVENTS

  and then test the deployment.

  (3) in other words, you can try this:

  Stop, soa_server (s), node_manager(if running), Server Admin

  Delete the cache files and for Admin Server and server SOA tmp files in $ORACLE_HOME/user_projects/domains/base_domain/servers/AdminServer/cache and $ORACLE_HOME/user_projects/domains/base_domain/servers/AdminServer/tmp

  Same BOF Soa Server $ORACLE_HOME/user_projects/domains/base_domain/servers/Soa_server/cache

  After that, restart the server

  Redeploy the composite applications again since the file via the EM, or JDeveloper .jar or WLST script.

• Error trying to change the Apple ID

  I use Safari on a Macbook 9.1 to try to change my email address Apple ID, following the instructions of change your Apple - Apple Support ID

  I get as much as enter the 6 digit code of the verification e-mail sent to my new email address, but when I click on check a little yellow box appears above the code saying: "your request could not be completed because of an error.".  I tried to send the verification email and using the new code several times.  I also tried to use Safari on iPad.  Same error each time.  I can't find all the reports of this error by using Google.  The Apple Id account works fine but still with the old email address when I connect to my devices again.

  Any ideas?

  There is a contact link.

  Apple ID support

  Apple ID support (2)

• Runtime error trying to install the printer on laptop software

  I have a laptop HP with Windows 7 Home Premium SP1, my printer is a HP photosmart c5580 AIO. It prints well but without software of the printer on the laptop I can not scan to the computer and use all the features of the printer.

  That being said, I am now trying to install the printing software Online and cd and I get Microsoft C++ runtime error and it will not install software.

  Ive tired all convenience stores of HP, etc, etc...

  Help, please

  Sunny

  Hi sunny1881,

  Welcome to the HP forums!

  I see you have a Photosmart C5580 which becomes a Microsoft C++ runtime error when you try to install the software. I'm sorry to hear that, but I will certainly do my best to help you!

  I would recommend that you follow through this Re: Error message Microsoft visual c ++ runtime library through my colleague @SuperMario1 as these steps should be able to help solve your problem. This is a long thread, but the steps should help, so take your time and work through it.

  I would like to know how it goes for you

• Error executing reverse against the planning your application

  Hello
  
  I've implemented ODI against the planning your application (fusion) according to the blog of John Goodwin (great work by the way), but I am currently facing a problem the second task on the reversal ended with an error:
  
  org.apache.bsf.BSFException: exception of Jython:
  Traceback (innermost last):
  "< String >" file, line 32, inside?
  com.hyperion.odi.planning.ODIPlanningException: could not connect to the instance of planning on the [archeo2] host, port [8300], check if connect you are correct.
  at com.hyperion.odi.planning.wrapper.PlanningWrapper.init (unknown Source)
  to com.hyperion.odi.planning.ODIPlanningConnection. < init >(Unknown Source)
  at com.hyperion.odi.planning.PlanningConnectionFactory.getAppConnection (unknown Source)
  at com.hyperion.odi.connection.HypAppConnectionFactory.getConnection (unknown Source)
  at com.hyperion.odi.connection.HypAppConnectionFactory.getAppConnection (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at org.python.core.PyReflectedFunction.__call__ (PyReflectedFunction.java)
  at org.python.core.PyReflectedFunction.__call__ (PyReflectedFunction.java)
  at org.python.core.PyObject.__call__ (PyObject.java)
  at org.python.core.PyObject.invoke (PyObject.java)
  to org.python.pycode._pyx5.f$ 0 (< string >: 32)
  to org.python.pycode._pyx5.call_function (< string >)
  at org.python.core.PyTableCode.call (PyTableCode.java)
  at org.python.core.PyCode.call (PyCode.java)
  at org.python.core.Py.runCode (Py.java)
  at org.python.core.Py.exec (Py.java)
  at org.python.util.PythonInterpreter.exec (PythonInterpreter.java)
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
  at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt (SnpSessTaskSqlC.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.i (e.java)
  at com.sunopsis.dwg.cmd.h.y (h.java)
  at com.sunopsis.dwg.cmd.e.run (e.java)
  at java.lang.Thread.run (unknown Source)
  Caused by: java.rmi.ConnectIOException: Error establishing connection JRMP. nested exception is:
  java.io.EOFException
  at sun.rmi.transport.tcp.TCPChannel.createConnection (unknown Source)
  at sun.rmi.transport.tcp.TCPChannel.newConnection (unknown Source)
  at sun.rmi.server.UnicastRef.newCall (unknown Source)
  at sun.rmi.registry.RegistryImpl_Stub.lookup (unknown Source)
  at java.rmi.Naming.lookup (unknown Source)
  ... 36 more
  Caused by: java.io.EOFException
  at java.io.DataInputStream.readByte (unknown Source)
  ... more than 41
  com.hyperion.odi.planning.ODIPlanningException: com.hyperion.odi.planning.ODIPlanningException: could not connect to the instance of planning on the [archeo2] host, port [8300], check if connect you are correct.
  at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
  at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt (SnpSessTaskSqlC.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.i (e.java)
  at com.sunopsis.dwg.cmd.h.y (h.java)
  at com.sunopsis.dwg.cmd.e.run (e.java)
  at java.lang.Thread.run (unknown Source)
  
  
  It seems that I can't connect to the planning your application, however, I checked host, port, user and password and it seems that they are correct.
  Can someone help me with this problem?
  
  Kind regards
  Marcin Stawny

  You certainly need to use port 11333, and you should make sure that the 'Hyperion RMI Registry' service is running.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error ORA-600 on the Production Oracle Applications Instance

  Hello
  
  We get the error ORA-600 on the Instance of the Production Oracle Applications.
  
  Can any body suggest how to solve this problem.
  
  
  We got the error on 30 - Mar below... but the instance is up & running.
  
  Error as follows:
  ==========
  
  error occurred at the SQL level 1 recursive
  to "DMSYS. OLAPIHISTORYRETENTION', line 1
  [internal error code, arguments: [16206], [4294951254], [] [] [], [], []]
  internal error code, arguments: [16206], [4294951254]
  
  
  
  Thanks in advance for your help.
  
  Thank you
  Mudunuri Billon.

  What version of Oracle?

• error trying to deploy the application for consolidation order

  I got you install patterns, to deploy the module store before, and when I try to deploy the application, I encounter an error :(
  
  This is my edited file "build.properties":
  
  ####################################################################
  # Property overall build set for SOA fusion order demo #.
  # > author: clemens utschig (oracle Corp.) 2009 #.
  ####################################################################
  
  # path of libraries and script imports
  Oracle.Home=D:\\Middleware\\JDEV\\jdeveloper\\
  # PROPERTIES OF THE SEED INTERNALLY - START #.
  # #
  # !!!!! DO NOT CHANGE! #
  # #
  ####################################################################
  
  Internal version number #.
  FOD.version = 2.3_ps3
  
  common libs of # home
  Oracle.Common.Home=${Oracle.Home}/... /oracle_common
  
  # Sub directory of the deployment artifacts
  deploy. Sub.dir = deploy
  # Sub Directory deployment / build scripts
  bin. Sub.dir = Bin
  
  # jee homes application
  creditauthorization. Home =... / CreditCardAuthorization
  orderapproval. Home =... / OrderApprovalHumanTask
  External.partnersupplier.Home =... / ExternalLegacyPartnerSupplierEjb
  composite homes #.
  orderbookingsdo.composite.Home=../OrderSDOComposite
  partnersupplier.composite.Home=../PartnerSupplierComposite
  orderbooking.composite.Home=../OrderBookingComposite
  B2B.composite.home=../B2BX12OrderGateway
  
  # adf service implementation context url
  storefrontservice.contextUri.adf=StoreFrontServiceHooks/StoreFrontService
  # sca composite according to context url
  storefrontservice.contextUri.soa=soa-infra/services/${soa.partition.name}/OrderSDOComposite!1.0/StoreFrontService
  
  # uri for the ExternalPartnerSupplierEJB ejb
  partnersupplier. EJB. URI = WebLogicFusionOrderDemo-ExternalLegacyPartnerSupplierEjb-SessionEJB #com.otn.sample.fod.soa.externalps.IExternalPartnerSupplierService
  # ejb application via Spring C uri & I ExternalPartnerSupplierEJB JSca
  partnersupplier. JSCA. EJB. URI = WebLogicFusionOrderDemo-ExternalLegacyPartnerSupplierJScaEjb
  
  # global connection to deploy settings, rmi and other
  
  # admin server t3: / / url - deployment
  WLS. URL = T3: / / ${admin. Server.Host}: ${admin. Server.port}
  # mgd Server t3: / / url - EJB
  WLS. MGD. Server.URL=T3://${Managed.Server.Host}:${Managed.Server.rmi.port}
  # ctx jndi factory
  Java.naming.Factory.initial = WebLogic.JNDI.WLInitialContextFactory
  
  # THE INTERNAL - END SEED PROPERTIES #.
  
  partition # where composites are needed to
  SOA.partition.Name = soaFusionOrderDemo
  
  # set to false if you want to use the adf supported services.
  SOA. Only.Deployment = true
  
  # deploy the b2b x 12 order composite transformation
  Enable.B2B.composite = true
  
  # use a normal ejb3 for the provider external partner (comment or set to false).
  # or use the new SCA Weblogic for Java EJB binding (uncomment and set to true)
  use. JSCA. EJB.impl = true
  
  Directory of the # file adapter - change your operating system (use-for windows and / for unix)
  orderbooking.file.adapter.dir=/tmp
  
  Directory control adapter # file - change your operating system (use-for windows and unix)
  orderbooking.file.adapter.Control.dir=/tmp/Control
  
  # jndi name of the jms for composite orderbooking topic
  orderbooking. JMS.topic.JNDI=JMS/DemoSupplierTopicUdd
  
  # Connection information for the deployment server
  
  # connection information in server admin - to start topics
  Admin. Server.Host = RZV - PC
  Admin. Server.port = 7001
  
  # the area where soa infrastructure is installed
  Server.domain.Name = soa_domain
  
  login # managed server, used for soa deployment, http
  Managed.Server.Host = RZV - PC
  Managed.Server.port = 8001
  
  test port # for rmi, ejb invocation and other
  Managed.Server.rmi.port = 8001
  
  credentials for servers
  Server.User = WebLogic
  Server.Password = WebLogic @.
  
  target server # wls (for the value server_soa, EIM use AdminServer shiphome)
  Server.targets = soa_server1
  
  # soa-server side oracle directory - necessary for the deployment plans
  # and the deployment of sca weblogic (on the ExternalPartnerSupplier project library
  SOA. Server.Oracle.Home=D:\\AS11gR1SOA
  
  # business test event - it's the business event queue
  
  user name of the diagram main db soa #.
  SOA.db.UserName = sys as sysdba
  # soa db password
  SOA.db.Password = Razvan
  # soa db = connection string > host: port: sid
  SOA.db.ConnectString = RZV - PC:1521:xe
  
  # MetaDataServices repository (used for SOA artifacts) shared settings #.
  
  # use 'jdev' for jdeveloper local install, "db" for the database
  # In case of 'db' change below (jdbc) parameters for the mds db
  
  Foreign.MDS.type = DB
  
  # Note: Before you deploy are of course you change these settings to your REMOTE
  # db - what is strips soa-infra, set the mds.type above for 'db' and run
  # the target of "importCommonServiceArtifactsIntoMds". This will import the common
  # shared artifacts of $OH/bin/soa-seeds / in the mds (RT) distance.
  # A shiphome install that this user is normally named sh_mds
  
  MDS.db.UserID = sys as sysdba
  MDS.db.Password = Razvan
  database connection string #: driver@host:port:sid
  MDS.db.JDBC-URL=jdbc:Oracle:Thin:@RZV-PC:1521:XE
  
  
  and this is the error I get:
  
  
  
  BuildFile: C:\fod\CompositeServices\bin\build.xml
  [echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
  [echo] Using mds-type: db
  entry entry jump as server.password property has already been set.
  
  init:
  [echo] Version of SOA Suite 11g:
  [java]
  [java] *****************************************************************************
  [java] Oracle SOA Server version 11.1.1.5.0
  [java] Build: 0
  [java] The generation time: my Apr 18 18:05:14 PDT 2011
  [java] Build type: free
  [java] Tag from the source: PCBPEL_11.1.1.5.0_GENERIC_110418.1550.0174
  [java]
  [echo] soa infrastructure mgmt home: D:\Middleware\JDEV\jdeveloper\
  
  setupWorkspaceForJdeveloperUse:
  [echo]! Implementation of workspace for JDeveloper, where seedlings adf-config, connections.xml and filling mds
  [echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
  [echo] Using mds-type: db
  entry entry jump as server.password property has already been set.
  
  init:
  [echo] Version of SOA Suite 11g:
  [java]
  [java] *****************************************************************************
  [java] Oracle SOA Server version 11.1.1.5.0
  [java] Build: 0
  [java] The generation time: my Apr 18 18:05:14 PDT 2011
  [java] Build type: free
  [java] Tag from the source: PCBPEL_11.1.1.5.0_GENERIC_110418.1550.0174
  [java]
  [echo] soa infrastructure mgmt home: D:\Middleware\JDEV\jdeveloper\
  
  createMDSConnections:
  [echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
  [echo] Using mds-type: db
  entry entry jump as server.password property has already been set.
  
  createMDSConnectionForDB:
  [echo] Creation... /. ADF/META-INF/ADF-config.xml for the MDS supported database
  entry entry jump as mds.db.password property has already been set.
  [copy] Copy 1 file to C:\fod\CompositeServices\.adf\META-INF
  [echo] With the help of jdbc:oracle:thin:@RZV-PC:1521:xe for storage based on db, with the sys as sysdba user
  [echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
  [echo] Using mds-type: db
  entry entry jump as server.password property has already been set.
  
  createMDSConnectionForFileStore:
  [echo] Ant: Apache Ant version 1.7.1 compiled Java on June 27, 2008: 1.6
  [echo] Using mds-type: db
  entry entry jump as server.password property has already been set.
  
  createMDSConnectionForServerFileStore:
  
  importCommonServiceArtifactsIntoMds:
  [java] Starting import from file system local to the mds...
  [java] oracle.mds.config.MDSConfigurationException: MDS-01330: cannot load the MDS configuration document
  [java] MDS-01329: cannot load the item "persistence-config".
  [java] MDS-01370: Configuration of MetadataStore for metadata-store-use 'mstore-usage_1"is not valid.
  [java] ORA-06550: line 1, column 12:
  [java] PLS-00201: identifier ' MDS_INTERNAL_SHREDDED. GETREPOSITORYVERSION' must be declared
  [java] ORA-06550: line 1, column 7:
  [java] PL/SQL: Statement ignored
  [java]
  [java]
  [java] at oracle.mds.config.PConfig.loadFromBean(PConfig.java:690)
  [java] at oracle.mds.config.PConfig. < init > (PConfig.java:499)
  [java] at oracle.mds.config.MDSConfig.loadFromBean(MDSConfig.java:707)
  [java] at oracle.mds.config.MDSConfig.loadFromElement(MDSConfig.java:764)
  [java] at oracle.mds.config.MDSConfig. < init > (MDSConfig.java:515)
  [java] at oracle.mds.config.MDSConfig. < init > (MDSConfig.java:443)
  [java] at com.otn.sample.fod.soa.util.MdsImportTask.getTargetMdsInstanceByAdfConfig(MdsImportTask.java:133)
  [java] at com.otn.sample.fod.soa.util.MdsImportTask.execute(MdsImportTask.java:155)
  [java] at com.otn.sample.fod.soa.util.MdsImportTask.main(MdsImportTask.java:84)
  [java] Caused by: oracle.mds.exception.MDSExceptionList: SDM-01329: cannot load the item "persistence-config".
  [java] MDS-01370: Configuration of MetadataStore for metadata-store-use 'mstore-usage_1"is not valid.
  [java] ORA-06550: line 1, column 12:
  [java] PLS-00201: identifier ' MDS_INTERNAL_SHREDDED. GETREPOSITORYVERSION' must be declared
  [java] ORA-06550: line 1, column 7:
  [java] PL/SQL: Statement ignored
  [java]
  [java]
  [java] at oracle.mds.config.PConfig.loadFromBean(PConfig.java:684)
  [java]... 8 more
  [java] Exception in thread "main" SDM-01330: cannot load the MDS configuration document
  [java] MDS-01329: cannot load the item "persistence-config".
  [java] MDS-01370: Configuration of MetadataStore for metadata-store-use 'mstore-usage_1"is not valid.
  [java] ORA-06550: line 1, column 12:
  [java] PLS-00201: identifier ' MDS_INTERNAL_SHREDDED. GETREPOSITORYVERSION' must be declared
  [java] ORA-06550: line 1, column 7:
  [java] PL/SQL: Statement ignored
  [java]
  [java]
  [java] at com.otn.sample.fod.soa.util.MdsImportTask.execute(MdsImportTask.java:225)
  [java] at com.otn.sample.fod.soa.util.MdsImportTask.main(MdsImportTask.java:84)
  
  BUILD FAILED
  C:\fod\CompositeServices\bin\build.XML:276: The following error occurred during the execution of this line:
  C:\fod\CompositeServices\bin\common-SCA-tools.XML:414: Java returned: 1
  
  Total time: 4 seconds
  
  
  Please help, I need this aplication for my final year project.
  
  Thanx

  # MetaDataServices repository (used for SOA artifacts) shared settings #.

  # use 'jdev' for jdeveloper local install, "db" for the database
  # In case of 'db' change below (jdbc) parameters for the mds db

  Foreign.MDS.type = DB

  # Note: Before you deploy are of course you change these settings to your REMOTE
  # db - what is strips soa-infra, set the mds.type above for 'db' and run
  # the target of "importCommonServiceArtifactsIntoMds". This will import the common
  # shared artifacts of $OH/bin/soa-seeds / in the mds (RT) distance.
  # A shiphome install that this user is normally named sh_mds

  MDS.db.UserID = sys as sysdba
  MDS.db.Password = Razvan
  database connection string #: driver@host:port:sid
  MDS.db.JDBC-URL=jdbc:Oracle:Thin:@RZV-PC:1521:XE

  You need to change below-

  The value of the mds.db.userid property must be created in DB using the remote schema MDS name. For example - dev_mds
  The value of the mds.db.password property must be the password for MDS schema.

  Make sure that the "mds_internal_shredded" module is in valid state (compiled) in the MDS schema.

  Kind regards
  Anuj

• Error trying to build app

  Hello

  I am developing an app for blackberry and so downloaded the momentics ide with the blackberry 10 Simulator. However, when I create a new application (only the model of "hello world" single) and try to build, I get the following error: make [1]: * no rule to make target 'test1155.ts', was in need of "liberation".  Stop.

  The strange thing is that I never said that he should 'release' the build. Everything is installed to "debug". Can anyone help? I tried to reinstall.

  Thank you.

  Well my last updated me in the right direction, then after trying to fix things that have not been broken since 3 days I fixed it. I installed momentics in another folder (no weird characters there) and now he is in fact, click on and. I should have stuck with "developers file name ', but I had to be fancy thank you for the advice and tips guys