Error trying to drag a clip to sequence2 sequence1

Similar Questions

• because it gives an error trying to open the clips in my cc of photoshop (windows 7, 32 bit)?

  ...

  I regret however video editing will not work in 32-bit operating system.

  Please visit the following link: Photoshop system requirements

• My first stop runnig suddenly when I try to drag a clip to the timeline or after scoring its entry points and in the Preview Panel, I try to drag it to the timeline.

  Suddenly my first Pro CC 2015-2 arrested runnig when I tried to drag a clip to the timeline, or when, after scoring its entry points and in the Preview Panel, I tried to slide the timeline. Apparently it works because it keeps at the opening, but one cannot do anything but you close with control Q; the keys on the keyboard are one thing that really works.  I can't do anything with the mouse and it seems that a certain way, the software crashed, but with all the panels open and without any warning. I copied the complete proyect to your laptop with the first Minister Pro 2015-1 and it happened the same thing, so I think the question is on the project and it started to happen after the update by 2015-1 about 10 days ago (this is not the first time that's happened but to this day I don't know how every time it turned fixed) old work projects and I finish the proyect (from scratch from another) on the same computer and with the same OS (windos10) without any problem with the Premier Pro CS6. So far I have not had problem with the version of 2015-1 that I bought last November. Could someone tell me what is happening and what is the solution?

  [edited by mod, too long title]

  Fixed with a new version of the same driver 341.92. I hope that it will be forever. Thanks for your advice and also thanks to the chat support team that came to the same conclusion.

• my calendar has frozen after trying to move a clip in e-mail by using the calendar; still frozen after that force them to leave

  my calendar has frozen after trying to drag and drop a piece of mail to the calendar; still frozen after forcing them to leave... using OS X v 10.9.5

  Get the error that civilian could not be refreshed... requires a force quit and then when reopened, get the same message

  Try restarting your Mac in safe mode:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• Trying to grab the clip in iMovie

  When I'm just trying to highlight a clip to use, the entire video is selected.

  I think I'm suddenly having the same issue.  My version of iMovie is 10.1.2.   El Capitan 10.11.4.

  To avoid any doubt are you trying to select a portion of a clip by making a click-and - drag on the desired section?  It is the method that I recently used to select portions I want to mark as a favorite.  Something has changed, and now, this translates into the entire selected clip.  You can drag the bars selection to beg and end of the global clip to select the desired portion.  However, it's painful if your source video is very long.

• Click and drag the clip/title on chronology, losing the cursor

  So, I'm in first Pro CC 2015.2 on my laptop Windows 7 Professional 64-bit. Only, I ran into this problem for the first time today.

  I went to drag my clip on the timeline, and I got the fist and NO symbol (the circle and slash). When I published my mouse click, my regular cursor did not return. Not even by pressing the V of the timeline has contributed to what either. The funny thing was that everything seemed to work fine otherwise, as access keys. But without a mouse, I couldn't make one of the effects that I had to. So, no access to any part of the software, I was forced to open the Task Manager and then exit the program and my project.

  The possible cause only I can think of is I have downloaded and installed a font out of the Internet today. Maybe related at all?

  Most common user error is not source patcher tracks.

  

  Also, could try to open the first while pressing SHIFT + ALT.

• New to first... How to still see the audio waveform when dragging a clip?

  I just installed the trial of first Pro CC and trying to familiarize myself with the program. I can't find how to make the audio waveform visible while dragging a clip, so that I can synchronize with other audio waveform. Thank you.

  Hi Avène,

  AFAIK, you can't see the waveform by dragging, but a faster and more accurate way would be not not to drag, but to familiarize themselves with the hotkeys to clips slip and slide

  and use for this task: (you see the waveform by pushing, dragging and dragging)

  These are the default shortcuts:

  	PC	MAC
  Drag the Clip left selection five images	ALT + SHIFT +.	Opt + shift +.
  Drag the Clip left selection an image	ALT +.	Opt +.
  Drag the Clip right selection five images	ALT + SHIFT +.	Opt + shift +.
  Selection of right slide Clip an image	ALT +.	Opt +.
  Slip Clip left selection five images	CTRL + Alt + Shift + left	Opt + Cmd + Shift + left
  Slip Clip left selection of an image	CTRL + Alt + left	Opt + Cmd + left
  Clip of slip right selection five images	CTRL + Alt + shift + right	Opt + Cmd + shift + right
  Selection of Clip of slip on the right a picture	CTRL + Alt + right	Opt + Cmd + right

  Move the Clip selection left five images	ALT + SHIFT + left	Command + shift + left
  Move the Clip left selection an image	ALT + left	Cmd + left
  Move the Clip right selection five images	ALT + SHIFT + right	Command + shift + right
  Selection of boost right of an image Clip	ALT + right	Cmd + right

  Once you understand these controls, you align clips much faster and easier!

  good resources:

  https://www.video2brain.com/en/lessons/keyboard-shortcut-changes-1

  repositioning, slide, slide starts at about 03:50, but I suggest, you look at all this.

  and:

  Adobe Premiere Pro help. Trimming clips

  .. .hope that helps, otherwise just come back here if you still have questions

  Greetings, felix

• Cannot left click and drag the clip in the timeline... Need advice

  Cannot left click and drag the clip in the timeline or drag autour clips in the timeline.

  Can be inserted into the timeline of the Source window, but cannot drag from the source window.

  Can cut and paste into the timeline.

  Cs5 restarting does not help, but restarting solves the problem for a while.

  Tried several mice, but that did not help.

  Have no idea how I got the name of FORMER PRO, must have been drinking champagne years, because I'm a blundering by excellence!
  

  Post edited by: old pro

  Problem solved by pressing the ESC key.

  Someone suggested that in order to heal the same problem in MS Word.

  Problem reappears and solves the ESC key.

  And now my life is complete!

• Error #1069: TextField drag and drop

  I created a clip I creates instances of the runtime by clicking on a button, these movieclips all have the anuee name # where # is the instance number.
  
  My problem is that the clip has a text box Dynamics slap in the middle of it that does not work with my drag and drop function. If I shake the cloud around the edges, drag drop works. If I click in the Middle it does not work and gives the following error in the output window
  
  ReferenceError: Error #1069: property not found dropTarget on flash.text.TextField and there is no default value for Suite_fla::MainTimeline/myDragHandler()
  
  Here is the myDragHandler function which only downwards click the Component Manager I have also a top manager who made stopDrag() but it's the same thing send me two errors for each click.
  
  function myDragHandler(event:MouseEvent):void
  {
  var object = event.target;
  object.startDrag ();
  };
  
  So I need to drag the clip even if the user clicks on the text in the middle of the box. Advice or advice is welcome.
  
  Thank you.

  in your loop where assign you event handlers, try to set the mouseChildren to false on the MovieClips bcloud property.

• I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.

  It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).

  You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.

• I have this error: error trying to validate the Winsock base providers, what should I do?

  I have a problem to connect to internet, even do I got excellent signal, it is always the same: network address acquisition. Check with network diagnostics, and then displays this error: error trying to validate the Winsock base providers. and suggest that you ask for help.  Can you give me a solution to this probem. Thank you very much.

  Click Start---> run---> type "cmd" in the Run dialog box, click on 'ok'. Type "netsh winsock reset" on the command line without the quotes and press ENTER. Leave the command prompt, restart your computer to see if it solves your problem.

  Good luck.

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Windows found driver software for your device but encountered an error trying to install it. The system cannot find the specified file.

  Original title: Windows encountered a problem installing the software driver for your device...

  Arrrrgh!  Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.

  I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "

  The job of printer/copier/fax end but not go on the scanner.

  I tried the 'fixes' to epson.com repeatedly with no luck.  This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.

  I ran the program to 'fix' Microsoft ATS with no luck.  It has detected the error and said that the problem has been resolved, but guess what?  No, it isn't.

  I clicked on install update driver/driver from Device Manager.

  I tried the work around, eliminating the "LowerFilters" of the registry.  Guess what?  You have it, no luck.

  So, before I go and buy a new printer/scanner, with no guarantee that they will work.  Does anyone have another suggestion?

  I am running Vista, 32-bit.

  You can also try and replace or install the ntprint.inf file.

  I had a similar problem on a Windows 7 PC and noticed that this file was not present.  I just copied the file from a different PC Win7.  The printer, I tried to install was a Brother MFC-J410w.

  The file can be found here C:\Windows\inf

  Hope this helps someone.

• Error trying to solve. + http + wifi

  Hi all

  up to now, am unable to establish a connection on the device. I have few things to understand before I go into details...

  (1) if the user has the APN settings, my application will connect to the Internet.

  (2) am using curve 8520 device, is not have APN settings, but it opens google and able to surf on the net. This means that the APN settings are only for applications to access the internet.

  (3) when I try to open my app Simulator, I got the exception "Error trying to resolve".

  the url is:

  "http://mypc5/BI/services/BIReport.asmx/GetChildReport?AccountId=12&Reportname=product_Report&Level=0&FLMasterDataId=0&SLMasterDataId=0&GroupItemId=0 &Rand=0;". = wifi interface.

  the exception is the following: I had the same exception.

  When I remove the suffix to the url, it is running in the Simulator. and in the device, I have exception "The Tunnel failed" .

  I used HttpConnection to establish the connection.

  Any help will be appreciated...

  A few quick tips:

  You asked

  "1) if the user is not APN settings, my application will connect to the Internet."

  A strand - review article and the vidoe and see how many ways there are for your application under connect to the internet

  You asked:

  "Am 2) using device curve 8520, is not have APN settings, but it opens google and able to surf on the net." This means APN settings are only for applications to access the internet. »

  A strand - review article and the vidoe and see how many ways there are for your application under connect to the internet

  You asked:

  "(3) when I try to open my app Simulator, I got the exception 'Error in trying to solve'. '.

  the url is:

  "http://mypc5/BI/services/BIReport.asmx/GetChildReport?AccountId=12&Reportname=product_Report&Level=0&FLMasterDataId=0&SLMasterDataId=0&GroupItemId=0 &Rand=0;". = wifi interface.

  the exception is the following: I had the same exception. »

  Hint - did you try cela in the Borwser, in fact any browser

  You asked:

  "When I remove the suffix to the url, it is running in the Simulator."and in the device, I have "Tunnel Failed" exception."

  A hint - see the section in the Thread that talks about what you can and can't do on the Simulator.  Also check the wire and the articles referenced to determine devices do when there is no suffix connection.

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.