Error trying to filter the column named 'value' in the tab data
I do not know it is because of the name of the column because all the other columns are working fine, but when I try to filter on the value = 60, I get an error:ORA-01722 invalid number
Code provider 1722
Is there a way I can filter this column? I tried quotes around column name, 'value' = 60, but that did not help.
Thank you
-Bill
What is the column data type and details? What happens if you (single) quote "60" instead?
K.
Published by: - K - 10/28/2009 14:12: corrected apostrophes
Tags: Database
Similar Questions
-
I have a problem to connect to internet, even do I got excellent signal, it is always the same: network address acquisition. Check with network diagnostics, and then displays this error: error trying to validate the Winsock base providers. and suggest that you ask for help. Can you give me a solution to this probem. Thank you very much.
Click Start---> run---> type "cmd" in the Run dialog box, click on 'ok'. Type "netsh winsock reset" on the command line without the quotes and press ENTER. Leave the command prompt, restart your computer to see if it solves your problem.
Good luck.
-
Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.
Hello
Try the methods below to solve the problem.
Method 1:
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Method 2:
How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista
http://support.Microsoft.com/kb/811259
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
-
Error trying to recover the ORA-12154 error text
Hi all
We want SETTING using ad module OBIA 7964 Finance. As part of have installed us Informatica 9.0.1 in our Linux x 86-64-bit server machine. And in the same machine, we installed a 11.2.0.1.0 oracle client.
And we install Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production in another linux server.
Now the question while trying to create a service of Informatica repository we get the error
2013-04-25 12:52:38: ERROR: (7899 | 140669883090720): (RS |) (BIAPPS_DEV): node01_haidcobidev01: OBJM_54538: unable to connect to the repository BIAPPS_DEV to the orcl database.
2013-04-25 12:52:38: ERROR: (7899 | 140669883090720): (RS |) (BIAPPS_DEV): node01_haidcobidev01: REP_51002: could not connect to the database server
Database driver error...
Function name: logon
Error trying to recover the ORA-12154 error text
Database driver error...
Function name: connect
Database error: unable to connect to the database using the [lower] user and the connection string [orcl]
Please let us know is there something missing as part of the Setup and let us know how to solve this problem.
Thank you
DanyWho is the owner of this post?
Looks like 2 different people possess!What link if you guys pass, try something like
HostName: port / serviceName -
I installed CS5 on macbook pro 10.9.4. I can't get the update to run to update the applications to the latest version. He said that there was an error trying to download the update and try again later.
update directly: http://www.adobe.com/downloads/updates/
-
Error loading configuration in the repository data
Hi all.
I installed Oracle 11 g R2 on Windows 2008 Server.
After that, I can't download the agent for a database.
Any comments please.
Thank you for your comments advense.
Here is the Log file:
.......
......
....
.....
March 9, 2011 14:19:46 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
CONFIG: Discover sql user: declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end;
March 9, 2011 14:19:46 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value has been set for the ORACLE_HOSTNAME parameter.
March 9, 2011 14:19:46 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Begin execution: CMD /C D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.bat "D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts;D:\app\DBAdministrator\product\11.2.0\dbhome_1\bin"; D:/app/DBAdministrator/Product/11.2.0/dbhome_1/perl/bin\perl.exe D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.pl D:\app\DBAdministrator\product\11.2.0\dbhome_1 "(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb)))" SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD
March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Output value 0
March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Running CMD /C D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.bat "D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts;D:\app\DBAdministrator\product\11.2.0\dbhome_1\bin"; D:/app/DBAdministrator/Product/11.2.0/dbhome_1/perl/bin\perl.exe D:\app\DBAdministrator\product\11.2.0\dbhome_1\sysman\admin\scripts\emca\emcaDbUtil.pl D:\app\DBAdministrator\product\11.2.0\dbhome_1 "(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb)))" SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD completed successfully
March 9, 2011 14:19:49 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Arguments passed D:\app\DBAdministrator\product\11.2.0\dbhome_1 (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb))) SYS SYSDBA declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end; FINAORADB 1 SYSMAN_PWD
Connect to the database using string (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = FinaOra-ground)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = finaoradb))) D:\app\DBAdministrator\product\11.2.0\dbhome_1 House with the role of 'SYS' user 'SYSDBA '.
connected to the database.
To run SQL declare repos_pwd varchar2 (30); view_user varchar2 (30); view_user_pwd varchar2 (30); view_user_acc_status varchar2 (30); begin repos_pwd: =?; SYSMAN.mgmt_view_priv.get_view_user (view_user); Select account_status from the view_user_acc_status of sys.dba_users where upper (username) = high (view_user); If view_user_acc_status like "% LOCKED" THEN immediate "change user" | view_user | 'unlock account'; END IF; IF view_user_acc_status like "% EXPIRED %" THEN sysman.mgmt_view_priv.set_view_user_creds (repos_pwd); SYSMAN.mgmt_view_priv. GET_VIEW_USER_CREDS (view_user, view_user_pwd); run immediately "edit user" | view_user | ' identified by ' | view_user_pwd | ''; END IF; end;
noOfParams to bind: 1.
run SQL.
March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig unlockMGMTAccount
CONFIG: Account unlocked mgmt_view
March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig invoke
CONFIG: Managed to unlock mgmt_view account
March 9, 2011 14:19:49 oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value has been set for the ORACLE_HOSTNAME parameter.
March 9, 2011 14:19:49 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Download of the configuration in the repository of EM data (this may take a while)...
March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
CONFIG: Error loading configuration in the repository data
oracle.sysman.emdrep.config.ConfigurationException: FATAL Exceptions of Configuration
at oracle.sysman.emdrep.config.EMSchemaConfiguration.perform(EMSchemaConfiguration.java:232)
at oracle.sysman.emcp.EMReposConfig.uploadConfigDataToRepository(EMReposConfig.java:699)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:385)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
to oracle.sysman.assistants.util.step.StepContext$ ModeRunner.run (StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig invoke
NEWS: Check the log to D:\app\DBAdministrator\cfgtoollogs\emca\finaoradb\emca_repos_config_ file < date > .log for more details.
March 9, 2011 14:22:54 oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error download configuration in the repository data
March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig perform
SEVERE: Error download configuration in the repository data
See the log file at D:\app\DBAdministrator\cfgtoollogs\dbca\finaoradb\emConfig.log for more details.
March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: error loading configuration in the repository data
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:397)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:583)
at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:139)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
at oracle.sysman.assistants.dbca.backend.PostDBConfigureStep.executeImpl(PostDBConfigureStep.java:269)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
to oracle.sysman.assistants.util.step.StepContext$ ModeRunner.run (StepContext.java:2667)
at java.lang.Thread.run(Thread.java:595)
March 9, 2011 14:22:54 oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoration of oracle.installer.oui_loc to D:\app\DBAdministrator\product\11.2.0\dbhome_1\ouiPL see MOS Doc 1233913.1 ("error downloading Configuration for the data repository" when you configure dbconsole) for the solution
HTH
Srini -
How to filter a column of values?
Hello
I imported a .csv file large journal that contains many different columns and values in DIAdem. One of the columns contains a hexadecimal value field, and I need to filter the column by the last byte of this hexagonal field. For example, one of the values can be "CFFD0F3" and I need to find all the rows that have "F3" as the last byte. I also need all the other columns to filter the same way.
There seems to be an easy way to do this in DIAdem, and I searched online and via the discussion forums of the means to accomplish it. Whenever I have to search for the word "filter" it always brings me to the FFT or high-pass/low-pass filters. I want just to filter a column like Excel does, but my log file contains about half a million entries, so I can't fully open in Excel.
I've attached a screenshot of what some of my columns looks like, but for reasons of confidentiality, I can't reach the log file.
Someone at - it ideas?
Thank you!
Hi Ben,
I cooked up a small nice application for you. Given that your post clearly stated that you were dealing with millions of data values, I took care to implement this request as efficiently as possible and to include State dialog boxes so that you know what the script is doing at any time and which actions are most of the time, where we try to further optimize your needs. You must extract the 3 files in the ZIP file attached in the same folder somewhere. Then you must run the script "ExtractIDGroups Add.VBS" to add the context menu and enter the UserCommands will call the context menu. We can implement your tiara to always run this VBScript when you start, once you are satisfied with the result.
You will use the new context menu in the following way. Load your data file in DIAdem, and then display the channels of data loaded in a table VIEW, like your screenshot posted. Now select and right click on the channel "Arb ID" (or depending on the channel has the Hex addresses) and choose the new context menu "extract ID groups. A user dialog box will pop up on the left of your computer screen lists all the listed final 2 Hex characters of suffix in this channel you clicked on. Select one or more suffixes desired Hex (shift or control for a multiple selection key), and then click the
button. You will then see each of these selections exploded as a new group in your data portal. You can select several times the "extract I groups" If you decide to go back and add a few ID groups more. The application is currently being implemented to sort the raw data in place according to the values of "Hex suffix" and leave it this way - it so that leaving the channel 'Hex suffix' in the raw data group makes more quickly to repeat ID group gross since the same set of data extraction. It's also the way more efficient to retrieve more than one ID groups, I'm guessing that you want to. Each snippet ID Group is sorted by the values of the first chain of this group. So if you want to sort these groups ID extracted by the string 'Abs Time' or "Time Rel", say, you need to drag this tri-canal in the data portal of his start position to the first position in this group of raw data before selecting the menu "Extract group ID".
Let me know how it works for you,
Brad Turpin
Tiara Product Support Engineer
National Instruments
-
Error trying to deploy the BPM soa server process
Hello world
straggling to solve this problem but my cause my of my inexperience on BPM is worse than I thought.
Once JDev compiled the Bpm process without error and create the ProjectName.jpr., I tried to deployed the process on the server of soa, soa_infra partition.
What I did:
1. go on JDeveloper | The application browser.
2. Select and right click on the project of BPM.
3. the SCW deployment Action started
4 fill in the fields and click OK
I get this error:
"
[16: 35:38] error in deployment of archives sca_project_name_rev1.0.jar of partition on the server soa_server1
[16: 35:38] HTTP error Code returned [500]
[16: 35:38] Error Message from the server:
There was a deployment of the composite on soa_server1 error: deployment failed: error occurred during deployment of the component: nameComponent to service engine: implementation.bpmn, for composites: Project_name: ORABPEL-05250
Suitcase BPMN deployment by mistake.
error when trying to deploy the BPMN component file ' / coretech/fmw11/user_projects/domains/svil_domain/servers/soa_server1/dc/soa_8918455e-2622-4261-acd1-6e281a82a0d9 "; the reported exception: java.lang.NullPointerException
This error was an exception thrown by the underlying deployment module.
Check the trace for the exception in the log (the connection value level debug mode).
.
[16: 35:38] check the log of the server for more details.
[16: 35:38] error in deployment of archives sca_Project_name_rev1.0.jar of partition on the server soa_server1
[16: 35:38] # incomplete deployment. ####
"
Do you know why the deployment failed? The compilation was ok...
Thanks for all the help you can give me.
Fairlie
Hello
Suitcase BPMN deployment by mistake. java.lang.NullPointerException.
This could be a variety of reasons:
(1) my problem was solved when I checked the fabricruntime.jar for jdeveloper middleware House
\jdeveloper\soa\modules\oracle.soa.fabric_11.1.1 and SOA home
Oracle_SOA1\soa\modules\oracle.soa.fabric_11.1.1 was different. So I copy the fabricruntime.jar of soa on jdev House home and redeploy the composite and it works. My conclusions at that time was namespace error.
(2) you can also apply the below patch
Patch 14618452: NPE IS THROWN everything BY DEPLOYING a PROCESS WITH SEVERAL SUB-PROCESS/WRESTLING EVENTS
and then test the deployment.
(3) in other words, you can try this:
Stop, soa_server (s), node_manager(if running), Server Admin
Delete the cache files and for Admin Server and server SOA tmp files in $ORACLE_HOME/user_projects/domains/base_domain/servers/AdminServer/cache and $ORACLE_HOME/user_projects/domains/base_domain/servers/AdminServer/tmp
Same BOF Soa Server $ORACLE_HOME/user_projects/domains/base_domain/servers/Soa_server/cache
After that, restart the server
Redeploy the composite applications again since the file via the EM, or JDeveloper .jar or WLST script.
-
Error trying to change the Apple ID
I use Safari on a Macbook 9.1 to try to change my email address Apple ID, following the instructions of change your Apple - Apple Support ID
I get as much as enter the 6 digit code of the verification e-mail sent to my new email address, but when I click on check a little yellow box appears above the code saying: "your request could not be completed because of an error.". I tried to send the verification email and using the new code several times. I also tried to use Safari on iPad. Same error each time. I can't find all the reports of this error by using Google. The Apple Id account works fine but still with the old email address when I connect to my devices again.
Any ideas?
There is a contact link.
-
Runtime error trying to install the printer on laptop software
I have a laptop HP with Windows 7 Home Premium SP1, my printer is a HP photosmart c5580 AIO. It prints well but without software of the printer on the laptop I can not scan to the computer and use all the features of the printer.
That being said, I am now trying to install the printing software Online and cd and I get Microsoft C++ runtime error and it will not install software.
Ive tired all convenience stores of HP, etc, etc...
Help, please
Sunny
Hi sunny1881,
Welcome to the HP forums!
I see you have a Photosmart C5580 which becomes a Microsoft C++ runtime error when you try to install the software. I'm sorry to hear that, but I will certainly do my best to help you!
I would recommend that you follow through this Re: Error message Microsoft visual c ++ runtime library through my colleague @SuperMario1 as these steps should be able to help solve your problem. This is a long thread, but the steps should help, so take your time and work through it.
I would like to know how it goes for you
-
Error trying to get the MBR of a georaster
Hi all
I have some cards georaster that have been downloaded and spatial indexing. However when I run the following command in 10.2.0.2 to obtain the minimum x MBR ordered, I get the below error message:
Did anyone know what I'm doing wrong or what is the right way to get the MBR coordinates for a georaster object. I have no problem, for vector data. Eventually, I'll do the same for all of the max and min x and y for my georasters.select sdo_geom.sdo_min_mbr_ordinate(WEB_RASTER_MAP_BNG.spatialextent, 1) from web_raster_map_file_bng; Error starting at line 1 in command: select sdo_geom.sdo_min_mbr_ordinate(WEB_RASTER_MAP_BNG.spatialextent, 1) from web_raster_map_file_bng Error at Command Line:1 Column:37 Error report: SQL Error: ORA-00904: "WEB_RASTER_MAP_BNG"."SPATIALEXTENT": invalid identifier 00904. 00000 - "%s: invalid identifier" *Cause: *Action:
Kind regards
TimYou have the table alias in the query:
Select sdo_geom.sdo_min_mbr_ordinate (a.WEB_RASTER_MAP_BNG.spatialextent, 1)
of web_raster_map_file_bng;Siva
-
When you try to access the tab to pay the buyer work center items get error:
You have encountered an unexpected error. Please contact the system administrator for assistance. (Without any additional information)
Please need help on how to solve this problem.
Thank you
Rambeau
It seems bug-
Please see - Center of the buyer: make an Exception when clicking on PAY tab ELEMENTS (Doc ID 1993378.1)
Kind regards
Kiran
-
IOM 11 GR 2 PS2: 404 error trying to open the task detail taskflow
Hi all
recently, I upgraded 11.1.2.0.13 IOM (BP13 11 GR 2) version for 11.1.2.2.1 a (11 GR 2 PS2 BP1).
In the old environment, I have developed a composite SOA custom for the approval of the application, and he had a custom task detail taskflow we use for email notification.
After IOM upgrade, custom composite SOA and custom Office retail taskflow work together, but try opening the datails of the IOM task waiting for approval, I get a 404 error.
If I try to open the task directly from SOA worklist application details, it works correctly.
Someone has an idea to investigate and solve the problem?
Thanks in advance,
Daniele
Hi all
in the tab Administration ApprovalTask, change of parameter 'HTTP Port' at the port of IOM and "URI" to /identity/faces/adf.task-flow?_id=ApprovalTask_TaskFlow&_document=WEB-INF/ApprovalTask_TaskFlow.xml, I'm able to open pending the approval of the work detail page of IOM.
Thank you all for the contributions.
Kind regards
Daniele
-
Error: CONNECTION loop in the user data
CONNECT IN a loop in the user data:
Table X (sample data were actually lines 35K)
--------------
CODE CASE OLD_ID New_id PERSON AUTH
01 ab122 1234 0001 AU123 99393
07 vv353 7872 0919 FV982 78282
01 ab122 1982 9929 99393 AU123
04 hjsss 8839 8302 JK920 32320
01 ab122 0001 1982 AU123 99393
05 cg899 6728 32322 IKL020 65252
07 w353 0919 8282 FV982 78282
now I need to order these data comparing the values of the line to old_id new_id for each combination of code, person, case
need output like below
Table X
--------------
CODE CASE OLD_ID New_id PERSON AUTH
01 ab122 1234 0001 AU123 99393
01 ab122 0001 1982 AU123 99393
01 ab122 1982 9929 99393 AU123
04 hjsss 8839 8302 JK920 32320
05 cg899 6728 32322 IKL020 65252
07 vv353 7872 0919 FV982 78282
07 w353 0919 8282 FV982 78282
to get to what I use:
-Request-
Select * from table_x
Start by old_id not in)
Select new_id
from table_x
)
CONNECT BY old_id new_id PRIOR =
AND code = code PRIOR
AND case EARLIER case =
PER person = person PREREQUISITE
-Request-
works very well with the sample data, but the problem is when executed with actual table that has 35K record...
Cause: The condition specified in a CONNECT BY clause caused a loop in the application, where the next record to be selected is a descendant of itself. When this happens, it may be no end to the query.
Action: Check the CONNECT BY clause and remove the circular reference.
Thank you
AK
Hello
CONNECT_BY_ISCYCLE is a pseudo-column that you can use in a query of CONNECTION BY NOCYCLE. It is separated from the CONNECT BY clause.
Try this:
Select code, "BREAKS", person
, SYS_CONNECT_BY_PATH (old_id, "/") AS path
from table_x
where CONNECT_BY_ISCYCLE = 1
Start by old_id not in)
Select new_id
from table_x
)
CONNECT BY NOCYCLE Old_id = new_id PRIOR
AND code = code PRIOR
AND 'CASE' = 'BOX' PRIOR
PER person = person PREREQUISITE
;
I hope that answers your question.
If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.
Explain, using specific examples, how you get these results from these data.
Always say what version of Oracle you are using (for example, 11.2.0.2.0).See the FAQ forum: https://forums.oracle.com/message/9362002#9362002
-
Error "could not get the audio data in the file.
Hello
I get a lot of mistakes "Could not get the audio data in the file" when you open a project. Sometimes they will plant Premiere Pro CC 7.01 (Mac). But if no first works as usual, with the audio.
I tried to convert the audio files (from the hearing) from 32 to 16 bit. It worked while opening a project once, but not the next time.
Where can it be?
Edit: I also get this error when importing audio: "error: Premiere Pro version 7.0 is not compatible with the first version of plugin Pro 5.7.4. Maybe it's related.
I have it! This is the plugin Smartsound hurt. Got rid of him and no more errors.
Maybe you are looking for
-
I use the private browsing mode, but firefox keeps the history of downloads
whenever I download something there in the download window until I have the clear, firefox is set to remember that do not
-
Need to boot drive for Satellite L750D
Hello I've owned a Satellite L750D for two years now, she has recently stopped working. So I gave it to my friend tech savvy of mine and he said that the hard drive was fired. So I bought a new one and it install it, the problem is when it starts it'
-
Satellite P200 - can enhance the HD DVD player on a Blueray player?
My laptop a P200. It has an internal HD DVD player. As this is a defunct standard can it be replaced with a blueray player? If so what model fit. TIAJohn
-
Vista installation goes into sleep mode
HelloI tried a full restore using the recovery discs. Everything's fine until it gets to install Vista - then he goes to sleep. I tried several times and it stops at different stages - steps 2, 3 or 4 usually. Any help gratefully accepted.
-
noise "alignment" on photos/videos
I noticed that there is a small static 'snap' noise that passes by watching videos or images, or sending texts. I noticed it in these particular situations so far: -on Facebook, when I stop to watch a video in my stream (I do not open the video, I ju