error trying to start emctl dbconsole

Similar Questions

• I can't start emctl dbconsole

  Hello

  I can't able to start dbconsole

  I entered the emctl start dbconsole command. I get the following output...

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, Oracle Corporation, 2009.  All rights reserved.

  The Oracle Enterprise Manager 10g database control commands:

  emctl start | stop dbconsole

  emctl status | secure | setpasswd dbconsole

  emctl config dbconsole-heap_size < size_value > - < size_value > max_perm_size

  emctl status agent

  agent of emctl course status [-omsurl <http://< who-hostname >: < who - not secure-port > /em / * >]

  emctl getversion

  emctl reload | Download | ClearState | GetVersion agent

  emctl recharge agent dynamicproperties [< Target_name >: < Target_Type >]...

  < options > emctl config agent

  emctl config agent updateTZ

  emctl config agent getTZ

  resetTZ emctl agent

  the emctl config agent credentials [< Target_name > [: < Target_Type >]]

  emctl gensudoprops

  emctl clearsudoprops

  Use of the blackout:

  emctl start blackout < Blackoutname > [-nodeLevel] [< Target_name > [: < Target_Type >]]... [d < time >]

  emctl stop blackout < Blackoutname >

  power outage emctl status [< Target_name > [: < Target_Type >]]...

  Here are the valid options for power outages

  < Target_name:Target_type > target local node the value by default if it is not specified.

  If - nodeLevel is specified after < Blackoutname >, the blackout will apply to all targets and a target list that follows will be ignored.

  Duration is specified in [days] HH: mm

  emctl getemhome

  emctl ilint

  Use of hotkeys em:

  emctl config emkey - emkeyfile < emkey.ora path > [-force] [-sysman_pwd < sysman password >]

  emctl config emkey - emkey [-emkeyfile < emkey.ora path >] [-force] [-sysman_pwd < sysman password >]

  emctl config emkey-rest [-emkeyfile < emkey.ora path >] [-force] [-sysman_pwd < sysman password >]

  emctl config emkey-remove_from_repos [-sysman_pwd < sysman password >]

  emctl config emkey-copy_to_repos [-sysman_pwd < sysman password >]

  emctl emkey status [-sysman_pwd < sysman password >]

  Secure the DBConsole Usage:

  emctl dbconsole secure sysman_pwd < sysman password > [-passwd_file < abs loc file >]

  [- host < hostname slb >] [- sid < service name >] [- reset] [- secure_port < secure_port >]

  [- root_dc < root_dc >] [- root_country < root_country >] [- root_state < root_state >] [- root_loc < root_loc >]

  [- root_org < root_org >] [- root_unit < root_unit >] [- root_email < root_email >]

  [- portfolio < portfolio loc >] [- wallet_pwd < pwd portfolio >] [- trust_certs_loc < CERT loc >]

  emctl status sure dbconsole

  Usage of Targettype of registers:

  emctl registry SGD targettype [o < output file name >] < XML file name > < user rep > < rep passwd > < host rep > < port rep > < rep sid > OR

  emctl registry SGD targettype [o < output file name >] < XML file name > < user rep > < rep passwd > < rep connect descriptor >

  Can someone help me how to solve this problem.

  d66e0d23-0a09-40C8-82e3-9e2c5af7a0f5 wrote:

  Hello

  I can't able to start dbconsole

  I entered the emctl start dbconsole command. I get the following output...

  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0

  Copyright (c) 1996, Oracle Corporation, 2009.  All rights reserved.

  The Oracle Enterprise Manager 10g database control commands:

  emctl start | stop dbconsole

  emctl status | secure | setpasswd dbconsole

  emctl config dbconsole-heap_size - max_perm_size

  emctl status agent

  Snip

  Can someone help me how to solve this problem.

  emctl has already tried to help you:

  The Oracle Enterprise Manager 10g database control commands:

  emctl start | stop dbconsole

  ============================================================================

  BTW, it would really help if you go to your profile and give you a recognizable name.  It doesn't have to be your real name, just something that looks like a real name.  Who said that my name really is Ed Stevens?  But at least when people see a message, they have a recognizable identity.  Unlike the name of system generated from 'ed0f625b-6857-4956-9b66-da280b7cf3a2', which is no better than the posting as "Anonymous".

  Everything you ed0f625b-6857-4956-9b66-da280b7cf3a2 of look alike...

  ============================================================================

• error trying to start the screensaver from microsoft on Windows 7 Dell computer lagoon

  I have a new duo inspiron dell running windows7 32 bit with a processor of 1.5 GB and 2 GB of ram. whenever I try to start the lagoon screensaver I get the following error. "Your computer has no resources available for the Saver screen of lagoon or system requirements.

  The screensaver of the lagoon is not included with Windows 7 and is not supported as part of the operating system.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• Cannot start emctl to use Oracle Enterprise Manager

  I'm trying to start emctl service to be able to use the web interface to Oracle Enterprise Manager: http://Server_host_name:5500 / em
  
  
  
  Here is what I get when I try to start emctl:
  
  
  
  # < strong > emctl start < facilities >
  
  < em > TZ value US / Central
  
  The MA Configuration problem. /Oracle/product/10.2.0/db_1a/server_host_name_orcl not found. < /em >

  EmcA allows to configure everything first.

  Do start using emctl.

  Published by: jaideepdba on November 6, 2008 07:14

• Error 11 GR 2 emctl start dbconsole

  I just installed database 11 GR 2. I installed with the manual option, no database created in the first place. I created the database manually already and already ran two scripts that create the data dictionary elements, etc.. I could start the instance and open the database successfully.
  
  But when I try to run the following command to start the dbconsole for enterprise manager, I get these errors. I understand that I must issue the full command, including the... part 'start dbconsole', but simply out of curiosity has also run the command without this part.
  I checked and I have place in the following directory:
  /U01/app/Oracle/product/11.1.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole
  
  but not the... localhost... part mentioned in the error message.
  
  What's not here? How to solve this?
  
  These are the errors displayed in each case...
  
  running the command complete...
  
  [oracle@localhost ~] $ emctl start dbconsole
  OC4J Configuration problem. /U01/app/Oracle/product/11.1.0/dbhome_1/OC4J/J2EE/OC4J_DBConsole_localhost.localdomain_orcl not found.
  
  running only the command emctl...
  
  [oracle@localhost ~] $ emctl
  The MA Configuration problem. /U01/app/Oracle/product/11.1.0/dbhome_1/localhost.localdomain_orcl not found.
  
  Published by: GabyPR on May 11, 2012 20:22

  Also, your SYSTEM's storage space is full - expand the existing data file or add a new data file to the repository

  >
  ...
  ORA-01653: unable to extend the table SYS. SYN$ 8 in the SYSTEM tablespace
  ...
  >

  HTH
  Srini

• I tried to start Firefox, but all I get is the error message below

  I tried to start Firefox, but all I get is the message below:

  "Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."

  I reinstalled Firefox and restarted my PC but I STILL get this message.

  I checked in Windows Task Manager, but Firefox is NOT listed as a running process.

  Have you any suggestions please?

  There are a few possible causes for this, all the details are in the section of the error message "Firefox is already running but is not responding" - how to fix .

• PhotoGallery asks for a CD, that I didn't when I open a session or perform a task. When I cancel, I get the error code 1706. How can I stop this program from trying to start?

  PhotoGallery asks for a CD, that I didn't when I open a session or perform a task. When I cancel, I get the error code 1706. How can I stop this program from trying to start?

  Hello Mark.Mac,

  Thank you for your message.  Click HERE to run the Windows Installer Cleanup utility.  Once you have run the utility of your computer restarts and the functionality test.  You can also watch in download/install Windows Live Photo Gallery HERE.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Firewall does not - when I tried to start BFS he sent error 5: access is denied.

  I followed the instructions to fix my firewall issues, and then I realized that I have vista instead of 7.  When I tried to start BFS he sent error 5: access is denied.  Now what should I do?

  Hi chic d,

  ·         Did you do changes on the computer before the show?

  ·         Have what troubleshooting measures you tried?

  ·         What do you mean by "when I tried to start BFS he sent error 5: access is denied"?

  ·         You use the Windows Firewall or any third-party firewall?

  Follow these methods.

  Method 1: If you use Windows Firewall, run the fixit of the article.

  Diagnose and automatically fix problems of Windows security

  http://support.Microsoft.com/mats/windows_security_diagnostic/

  Method 2: Check the status of the Windows Firewall service. Follow these steps:

  (a) click Start and type services.msc in the search box and press enter.

  (b) locate the Windows Firewall service.

  (c) make you sure the service is started and set to automatic.

  Method 3: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Response the information necessary for you help to solve the problem.

• Trying to access C: I get various error messages. I tried to start with windows 7 Home premium safe mode

  I have several hard drives in my computer. Local disk C: is not available. Disks hard D; E; F; and G work without problem.                             Trying to access C: I get various error messages. I tried to start in safe mode, also tried to use the administrator user and still no luck.

  At some point, I'll get one of the following messages

  My computer ran fine until a week ago. I have I think some how disable the administrator account and disabled drive C:

  (1) error 0 event log x 081000202.

  (2) temporary files for users: (Sean-pc) are limited.

  (3) I need the net administrator authorization.

  (4) C: not available Windows\system32\config.cmd.exe

  Hello

  Problems with the drive in Windows may result from permissions problems, or even corrupt corrupted user accounts.

  1. What is the exact error message you get when accessing drive C?

  Method 1: I suggest you to activate the default Administrator hidden on the computer account and check if it helps.

  Try to activate the built-in Administrator account, follow these steps:

  a. Click Start and type cmd in the box start the search.
  b. in the list of search results, right click Guest and then click Run as administrator.
  c. When you are prompted by user account control, click on continue.
  d. at the command prompt, type net user administrator / Active: Yes and then press ENTER.
  e. type net user administrator , and then press ENTER.
  f. Type exit and press ENTER.
  g. disconnect from the current user account.

  Method 2: Try to take ownership of the drive and check to see if the same problem happens.

  a. right click on the drive and then click Properties.

  b. click the Security tab and then click Edit.

  c. do one of the following:

  ·         To set permissions for a user who is not listed under group or user names, click Add, type the name of the user or group, click OK, select permissions and then click OK.

  ·         To change or remove permissions for a user or an existing group, click the name of the user or group, select the permissions and then click OK.

  For more information, see the article below:

  What to know before applying permissions to a file or a folder:

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

  "Access denied" or other errors in the access to or work with files and folders in Windows: http://support.microsoft.com/kb/2623670

  Method 3: Check a drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• How to solve this error "the game met a fatal DirectX issue while trying to start. Try a different screen resolution or bit depth. If this does not work, try new video drivers. »

  Hi all

  I get the following error every time I try and start Asherons call on a new Dell Latitude E5510 laptop.

  The game has encountered a fatal DirectX problem trying to start.
  Try a different screen resolution or bit depth. If this does not work, try new video drivers.

  This error occurs just after clicking the world to enter.

  • I have a fresh install of Win7 64 bit (entirely the window update)
  • The latest Intel HD - v8.15.10.2622 01/10/2012 graphic card driver.
  • A sweet DX 9 and DXDiag and 11 installation reports no errors.

  I lowered res video and depth of color, but without result.

  Digitized internet and found others with the issue but no resolution, I could see.

  Anyone have any ideas/suggestions?

  I love a solution restored for the following driver and the problem resolved.

  V8.15.10.2599 21/10/2011

• I downloaded Photoshop CC, but when I tried to start it it says that there is an error.

  Always tried to start it, same result.  delited it tried to download CC PS once again, but now says that my CC PS is up-to-date and will not download again.  How can I get that back?

  This is perhaps due to the removal of the application of the CC of the Ps. As it has not been uninstalled, so when you try to download, it shows you that it is already downloaded.

  Run the cleanup tool to remove Ps CC:http://www.adobe.com/support/contact/cscleanertool.html . Restart the computer and then try to reinstall the Ps.

  If that's the case then please check your private messages and send me the necessary info to connect the session...

  Kind regards

  Ashutosh

• Satellite A100-590: PXE error at the start of the CD

  Hello

  After searching for hours on google and other places without finding any helpful response, I decided to ask here. I hope someone here can help me out.
  I have a Toshiba Satellite A100-590, and I am trying to install Windows XP Pro SP2 MSDNAA from a cd. But whenever I try to boot from it, I get the following error message:

  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.

  and it starts the already installed Windows XP Home Edition. On several boards of people say that this is caused by the boot loader tries to start from a network and not being able to find a server to boot from. I tried all the stuff like setting up LAN to the last item in the startup list, but nothing helps... any suggestions?

  Thanks in advance.

  Hello

  The PXE error occurs if the device tries to start first on the LAN.
  I put t know how you boot from the CD, but I recommend to change the boot order in the BIOS. LAN Boot option must be set at the end of the order and the CD at the beginning.

  Check it out.

• laptop does not recognize the phone samsung S3 31 error: the Service starts

  Original title: error 31: Service starts
  I'm trying to get my laptop to recognize my phone of samsung S3.  I downloaded ' Microsoft_User-Mode_Driver_Framework_Install - v1.0 - WinXP.exe'... this driver is needed to get my laptop to recognize my phone. but, the service of this driver does not start... How can I get this service to start?

  Hello

  If resetting the phone does not help then you can contact samsung support.
  http://www.Samsung.com/SG/support/main/supportMain.do

• I have this error: error trying to validate the Winsock base providers, what should I do?

  I have a problem to connect to internet, even do I got excellent signal, it is always the same: network address acquisition. Check with network diagnostics, and then displays this error: error trying to validate the Winsock base providers. and suggest that you ask for help.  Can you give me a solution to this probem. Thank you very much.

  Click Start---> run---> type "cmd" in the Run dialog box, click on 'ok'. Type "netsh winsock reset" on the command line without the quotes and press ENTER. Leave the command prompt, restart your computer to see if it solves your problem.

  Good luck.

• My computer keeps restarting while trying to start Windows

  After reading a few similar questions here, I tried to start safe mode and had the same results.  Then I chose 'Disable automatic restart in case of system failure'.

  It has a blue screen.  The error at the top has shown

  "IRQL_NOT_LESS_OR_EQUAL"

  Under the technique, he showed

  "STOP: 0X0000000A (0X00000002, 0000001 0 X, 0 X 98954288, 0X9051F787F).

  I also tried to start using last good configuration.  This is responsible and made me on the desk, but as soon as I tried to do anything, the computer restarts.

  Can anyone give me some help/idea as to what is the problem and if it is repairable?  Thank you.

  Hi tbyrd81,

  1. Remember to make changes to the computer, after which the issue started?

  I suggest you to take a look at the following article link and check if it helps:

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

  I hope this helps.