Error upon opening FM9, even after uninstall/new download

Similar Questions

• Error message of recovery even after uninstalling printing 20 of Broderbund

  Original title - Windows Vista/Broderbund incompatibility problem

  I did a thing bab! I downloaded and installed printing 20 of Broderbund to my Toshiba Satellite A355-S6879 laptop which has windows vista.  I uninstalled it, but there's a problem.  When I close the lid and open it back up, it is re - begins with a recovery error message, or I have to turn off and turn on again with a message of error recovery.  All the world out there doing something this stupid and was able to solve the problem?  Help!

  Hello IworkForTheCat,

  I would go into the registry and see if you can find any mention of Broderbund the print shop 20.
  Note: the REGISTRY settings change incorrectly can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Go to start. In the start search box, type Regedit.
  Then, in the Menu bar, go to Edition and select search. In the find what box, type the string value you want to search.

  Please make a backup before you make any changes in Regedit. If you are not comfortable making changes, then please take it to a qualified person who can help you with your problem.
  You may need to contact Broderbund to determine if they have a removal tool or they can tell you where to find entries in the registry.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have problem in photoshop cc 2014, it does not open and when I try to open it, it gives me this massage: photoshop quit unexpectedly, I have tried several times to open it, even I uninstall and downloaded again, but the problem is the same

  

  And who says very clearly the SelectiveTool Nik/Google plugin crashes you.

  Will disable plugins Nik/Google and contact Nik/Google for updates.

• DW CS6 does not open in OS 10.9.5, even after uninstall and reinstall (several times)

  DW CS6 does not open in OS 10.9.5, even after uninstall and reinstall (several times).

  I tried to delete all the prefs with the name of Dreamweaver in Library/preferences and in application Support/adobe. Doesn't change anything.

  Is there a conflict with something else? Is there something else I can do?

  Could be a permissions problem. Try to create a new admin-level Mac user account and see if that helps.

  Nancy O.

• PS CS6 cannot be implemented until even after uninstalling and reinstalling. And the error code is 16.

  PS CS6 cannot be implemented until even after uninstalling and reinstalling. And the error code is 16.

  Configuration error. CC, CS

• Illustrator update will not install even after uninstall and try again several times.

  Updated Illustrator install, even after uninstalling (using the application "Adobe Illustrator CS6 uninstall" and a new attempt (using Adobe Application Manager} repeatedly.)) Now I can't open AI CS6 at all.

  The error message that I get in the request handler is:

  "Application not found. Restoration in the case where it has been trashed/moved to another volume. "Reinstalling the application otherwise (U44M1P2B).

  Help!

  Can you please try to install Adobe Application Manager of http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.

  If this does not work then the safest course would be to remove all Adobe Creative Software using the uninstaller programs located in Applications/Utilities/Adobe Installers.  This should then remove the Adobe Application Manager folder also within public services.  Once the software is completely uninstalled and Adobe Application Manager is deleted, then you should be able to reinstall it from https://creative.adobe.com/.

• Get the 16 error in Photoshop CC2014 even after installation and reinstallation of mac maverick last updated 10.9.5

  Get the 16 error in Photoshop CC2014 even after installation and reinstallation of mac maverick last updated 10.9.5

  Check if that helps. http://helpx.Adobe.com/x-productkb/policy-pricing/configuration-error-CS5.html

  ~ David

• I installed a program and even after uninstalling, it still shows as my browser by default, so how can I get rid of him even after his retirement from the Add-ons and my

  The new default browser is called ask.com and it showed up after I installed a program to download faster. I uninstalled the new program from my computer and add0ons, but it is still throw me back to new default browser even after I installed firefox four times. It's irriating and it just doesn't seem to go away. How can I get rid of him without losing bookmarks and information?

  You can use the SearchReset extension to reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  You can do a search on the topic: config a page to ask.com

  • http://KB.mozillazine.org/about:config

• 2 of 6 pages open, even after uninstalling and reinstalling

  I write again, I lost it in FF so I do new in Chrome. the habit of 2 open pages. The key that I use. Had type of updates to 3.6.XX that I really liked. However support so that it stopped. I have 2 laptops that he has failed on this one. I got on the other version tab bar and had not checked the box to load like bar tabs on this machine. It seems to be a situation of memory.

  I solved the problem by uninstalling everything in FF and then back up that is the only way I knew the problem. I appreciate the response of cor - el, who probably would have fixed the problem but does not check the response after the fact. Appreciate knowing that there is a good bunch of people here to solve problems. Thank you

• What should I do if receives the error message 213:20, even after several uninstall/reinstall?

  Photoshop Elements 9 did not cooperate on the same PC, it has been purchased and installed originally on. I tried uninstalling and reinstalling and I tried to reinstall from the desktop. Computer restarted on all trys and still not be able to open with the message:

  Configuration error

  There was a problem with the license of this product. Restart your computer and restart the application. If the problem persists after the relaunch, contact Customer Support and provide the error code 213:20

  Thanks for all the ideas and help

  See here:

  In Photoshop Elements license error

• A new Mac (2015). Migrated CS4 products. They will not work even after reinstalling Adobe download. Get error messages.

  Open question cannot be resolved: #.

  0215673548

  Errors with photoshop: some of the missing components. Replace. (I have 3 times without resolution).

  HAVE: Missing fatal error. and error of Plugins.

  Dreamweaver: Could not locate resources file... reinstall. (It's-no not fixed.)

  Finally got Adobe Pro to work after the 2nd re-installation.

  You should probably uninstall and use the cleaning tool before you try to reinstall - it might be useful.  Migration does not work for Adobe products if so doing, he might have left a bit of a mess behind.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

• Office Pro 8000: Cannot Print/Out of ink error even after installing new cartridge.

  When I tried to use my printer a few days ago, I received an error message "can't Print Can: ink" on the magenta cartridge.  I had used the printer a few days before and had not received a low ink warning.  It seemed suspicious to me that I would have received an empty cartridge error message without having previously received a low cartridge warning.  The cartridges yellow and cyan read 70% complete - all 3 were original cartridges.

  I bought a new cartridge 940XL magenta and installed according to the instructions.  Now, I get a message that the new 940XL cartridge is empty.  I can shake the old cartridge 940 and hear liquid inside.  Obviously, the new cartridge is also complete.  I tried to electric bike, reinstall the software, etc., without change of status.  If I swap back between the 940 old and new cartridge 940XL, they are correctly identified by type on my screen as the 940 or 940XL.  Because of the way the problem is presented, I don't think it is a cartridge problem.

  Of course, problem first awaken on May 8, and my warranty expired on 26 April.  Any suggestions?

  I solved my problem, what was obviously a lack of factory Assembly.  I looked inside my printer with a flashlight in the area where the ink cartridges are installed and found sprayed inside the printer magenta ink.  I disassembled the printer and found that the magenta line had been damaged during installation.  There are four tubes of ink that out by behind the ink cartridges, can do a U turn back toward the front of the printer.  Just after the bend, they do an another elbow top neighborhoods.  It is at this point that I found the damaged magenta line, directly above a screw on the right side of the housing of the ink cartridge.  The lines are in a very narrow passage and are held in place by several guards, moulded plastic.  It seems that the lines have been in place in the guardians, then the screws inserted from the top.  As I said, there is a tight passage, and it would be very easy to damage the line of ink right here if the lines have not been carefully selected to insert the screws when mounting.

  To solve the problem, I removed about 1/4 inch line damaged magenta ink.  I cut the line with a sharp razor, carefully to avoid collapsing the line or causing burrs to the hose.  I then placed approximately 3/4 "heat self-sealing tube on one end of the line of ink heat shrink.  Then I connected to the line with a small piece of plastic tube rigid of the handle with a swab of cotton, which was a perfect fit and comfortable on the line of ink.  Making sure not to cut the tube of ink or cause other damage, gently twisted the line of ink back until the ends have butted up inside the splice of cotton swab.  I then positioned the shrink tube over splice and it shrunk with a hair dryer.  Heat shrink tube, I used a hot melt glue applied to the Interior, which has helped more away making a watertight splice.  Again, it is not a lot of space, so the splice should remain small.

  I reassembled the printer, reinstalled ink cartridges and powered by the printer.  After the normal, long time running, I printed full color sheets and everything was fine.  Already that I had installed the cartridge magenta watch now that it is complete, and the remaining cartridges also read the levels they had before disassembly.

• Cannot open Firefox even after deleting all files and profiles of school boards.

  My computer auto-installé the new Firefox version 40.0.2 (and later 40.0.3) and the browser does not open. It worked and I have not received any error message. I tried every fix I can find here, and even manually, I deleted all of my profiles, folders, program files, uninstalled, reinstalled, restarted my computer, and it still not open. I click on the Firefox button in my bar tasks, the charging symbol goes for a few seconds, then more nothing. Firefox opens and runs without any problems on other computer on computer accounts. I even copied the files of Firefox to the another computer account on which it runs and replaced all files on the computer account that Firefox does not on, rebooted and still nothing. I've been dealing with this issue for over 2 weeks now and am very frustrated because I spent hours trying everything I can find.

  This fix does not work either... tried previously and tried again. However I FINALLY got my Firefox to work on mine. I ended up finding a virus free online (ESET online scanner) scanner and do a full scan on my computer in order to remove anything that could cause a problem. I also went through all my computer programs and documents and cookies and temporary internet files and deleted everything which is not necessary or if it is no longer used. I thought it must be something else because Firefox has no problems with other users of the computer, and my original profile worked very well under other computer users when transferred manually. I think something was interfering with Firefox, which is why none of the fixes here worked because they targeted Firefox itself when it seems that it wasn't the problem.

  Thank you all for your comments!

• FF7 installed but keeps saying ver3 even after uninstalling and reinstalling FF7

  had problems with firefox crashing a lot – had automatic updates-worm checked and said was ver3.6 wow, installed ver7 and run after installation. but after new opening and closing dates to ver3.6 so uninstalled fire3fox even completely bookmarks and others. then downlaoded and reinstalled ver7, newest, ran fine until I closed and reopened, and then becomes ver3.6. someone else? do not understand that. no other problems - except initially was breaking some sites - especially break.com when I came here, but others also. why I tried to update.

  Your string UserAgent in Firefox is marred by another program you have installed.
  
  http://en.Wikipedia.org/wiki/USER_AGENT

  type of topic: config in the URL bar and press ENTER.
  
  If you see the warning, you can confirm that you want to access this page.
  
  Filter = general.useragent.
  
  Right click the preferences that are "BOLD", a line at a time, select reset.
  
  Then restart Firefox

• Repeatedly to get BSOD on Windows 8, even after the new re - installed.

  Hello

  I installed a new copy of Win8 about 3.5 months ago, and last week I started having these BSOD errors (possibly after a windows update):

  1. NTFS FILES for error SYSTEM
  2. IRQL NOT LESS OR EQUAL
  3. LIST OF CORRUPT NFP
  4. SYSTEM SERVICE EXCEPTION

  Everytime I restarted my computer, I had another of these errors. So I decided to update the installation of Windows 8, and because the update remained stuck on 39% more day I left it. At this point, it was simply impossible to connect to windows whenever I tried because the BSOD would leap upward before that windows won't even load.

  Attempts at recovery:

  1. Fully formatted HARD drive, installed Windows 8, but it was just a matter of time until that the BSOD was back again after a windows update. I suspect that these errors are all drivers related issues, but how can we know which driver is causing the conflict exactly? What can I use to read the Dump files easily?
  2. Research showed it could be things like adapters wireless usb etc, and I noticed that my usb adapter list win8 as a compatible platform. I went to the store and bought a usb adapter which is 8 compatible windows. I also bought a HARD disk that is compatible win8 just to be sure. I tried another new facility at the new disk and he succeeded. I installed the driver of usb wireless network card compatible win8 since the accompanying CD and the BSOD was back.
  3. Completely re-formatted the HARD drive tries again, another installation, but once it has reached "Installing updates" IRQL LESS or DIFFERENT error popped up again. I don't think it actually installed updates because the computer was not connected to the network somehow, because the usb adapter is no longer connected to the computer.
  4. I tried to install another after a quick format once again, and when she reaches the "Install updates" step the BSOD came back (no cable Ethernet or a wireless connection to internet).

  Issues related to the:

  1. A full format really helps the situation?
  2. Is it possible to have driver problems during the installation of windows on a hard drive completely wiped out?
  3. Why it would fail to step "Install updates" even if there is no connection to the network, so no way to download the updates?
  4. Is it possible that the other components of my machine cause conflicts?
  5. If not, how can I solve this problem? What are some other things to try?

  Here are the specs of my machine:

  • Graphics, GTX 670 1 800 MB of memory.
  • 16 GB of RAM DDR3 Corsair Vengeance.
  • Processor 3.5 GHz Intel core i7 - 3770 k

  Thank you

  Hello

  It turns out one of my RAM chips was defective.

  I ran a diagnosis of memory, which has detected hardware problems, then I ran my computer with each piece at a time to determine the defective one.

  My computer works fine now. I think that everything else is fine as well.

  I thank very you much for all the help. I'll reach out again if something else happens.

  Edmar - G.