Error using APDU buffer for update methods (encrypt/decrypt/sign)

Similar Questions

• "An error occurred when checking for updates. 90074002

  "An error occurred when checking for updates. 90074002 you will not be able to sign until this review is complete. "Incidentally I can't delete the games for windows live, he always tells me that to locate the games for windows live .msi files or Xlive.msi. I am at a loss here. I can't find anything on the web with this error code. Any ideas?

  "An error occurred when checking for updates. 90074002 you will not be able to sign until this review is complete. "Incidentally I can't delete the games for windows live, he always tells me that to locate the games for windows live .msi files or Xlive.msi. I am at a loss here. I can't find anything on the web with this error code. Any ideas?

  I would first scan the computer for malware using Malwarebytes and SuperAntispyware. Make sure that you update the scanner before scanning. Once finished, remove any found object and then return...

  Malwarebytes.org

  Superantispy-portable  < you="" will="" not="" need="" to="" update="" this="" scanner="" if="" used="" within="" a="" reasonable="" amount="" of="" time="" after="">

• Error 80040154 when checking for updates.

  Original title: Windows could not search for new updates. Windows Update has encountered an unknown error: Code 80040154.

  Update Windows. Error code: 80040154. Also, cannot connect to Windows Live Messenger, because of the same error Code.

  Nashon123,

  Try to run the tool components reset Windows Update:
  http://support.Microsoft.com/kb/971058

  Make sure that your computer's date, time, and time zone are correct.

  If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• an error occurred when checking for updates.

  error occurred is all I ever get when I use the Help toolbar selection, "check for updates".

  Hello
   
  1. do you have specific error codes with the message?
  
  2. are you referring to the Windows updates?
   
  Follow the steps and check if that helps.
   
  Step 1:
   
  Troubleshooting of Windows update run and check if this is useful.
   
  Step 2:
   
  There are many reasons where the windows updates to date do not settle, most of it is caused by security software.
  Temporarily disable any security software and then try to install the update, follow the steps mentioned below
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
  
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows Update error 0 x 80070003 for update KB2973201

  I got 0 x 80070003 errors when attempting to install update KB2973201.

  By default, Windows Update problems resolution succeeded, but problems persist.

  Specific error Windows Update Automatic troubleshooting managed, but questions persist.

  Troubleshooting report detection details:

  RootCause:	RC_DataStore
  Error code:	0 x 80070057

  Here's what worked for me and probably you need to do:

  Open a command prompt (press the windows key, type made cmd right click the application and run as administrator)

  Each of these commands will take a long time, but feel free to use your system as usual while they are running.

  Run the command sfc / scannow

  No matter what corruption is detected / without being detected, fixed / not fixed - make sure that you are connected to the internet and immediately run the following commands one after the other:

  Dism /Online /Cleanup-Image /ScanHealth
  

  Dism /Online /Cleanup-Image /CheckHealth
  

  You can retest the initial problem at this point, but I recommend to proceed directly to the final stage. Insert your windows installation media. Do not run anything in the media, but make sure that it is accessible, and run the online image repair command replaces all that follows "Source:" with the location of your media. If you use a disk, for example, and the disc is titled "D:" then replace "C: \test" etc. with "D:" and run the command:

  Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows
  

  If you use a disk in drive D:, the command will look like this:

  DISM/Cleanup-Image /RestoreHealth / Source: D Image:C:\offline:

  After repairing your image, run the automatic troubleshooter for windows update again, and check for updates.

  After you complete these steps, I was able to install all updates, including those that have previously failed. I really hope this helps and sincerely apologize if it is not.

  I'm not a software engineer, computer SCIENTIST, technical support specialist or an employee of Microsoft, but this is what worked for me, after a lot of troubleshooting.

  Please refer to this online resource for more information on repair of a windows image: http://technet.microsoft.com/en-us/library/hh824869.aspx

• Newbie Question: Should I use a connection for each method?

  It's my first project using SQL and Java, I have actually some learning on this subject but fun, but I'm still a beginner, so bear with me. When I set up a connection to the base, he goes into a try block:

  private void connectToDB(Connection con, String username, String password){         try{             DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());             con = DriverManager.getConnection("jdbc:oracle:oci8:@localhost:1521:xe", username, password);             System.out.println("Successfully connected to database\nDatabase: xe\nOn host: localhost\nPort: 1521\nAs user: " + username);         }         catch(SQLException e){             System.out.println("Database connection error:\n" + e.getMessage());             System.exit(1);         }     }

  But it does mean that when I want to use the connection to another method (to query the database), it throws a NullPointerException (I think because there is no guarantee that jerk has been implemented?)

  private void getAllJobs(Connection c){         try{             Statement s = c.createStatement();             String selectAllJobs = "select * from jobs";             ResultSet row = s.executeQuery(selectAllJobs);             while(row.next()){                 String name = row.getString("NAME");                 int jobNo = row.getInt("JOBNO");                 String urgent = row.getString("URGENCY");                 Date date = row.getDate("JOBDATE");                 System.out.println(name + jobNo + urgent + date);             }         }         catch(SQLException e){             System.out.println("Could not execute statement in method getAllJobs");             System.out.println(e.getMessage());         }         catch(NullPointerException e){             System.out.println("Could not create statement, connection is null");             System.out.println(e.getMessage());         }     }

  On this basis, I get the result:
  
  "Successfully connected to the database
  Database: xe
  On the host: localhost
  Port: 1521
  User: human resources
  Could not create statement, the connection is null
  NULL.
  
  I should create a new connection in each method I use, so that the sql statement is in the try the connection block create? What is the best way to handle this? Something different wrong with the code ignore for now, I'm looking for this answer so that I can continue the work.
  
  Thank you
  eskimo9

  OK - seems kind of, I went on a tangent and my brain took a vacation.

  Java is pass by value. If your code:

  private Connection con1;
  
  connectToDB(con1, "hr", "hr");
  
  private void connectToDB(Connection con, String username, String password){
  

  past the 'value' "con1" contains (which has the null value) to the method "connectoToDB". The method can manipulate the object, if it is not null, but it cannot change the setting points to the object. Such an assignment within the method is only local.

  You have shown that on the inside of the 'con' method has a value after the connection is created, but the original variable "con1" does not because the method cannot change what it points to.

  Change the "connectToDB" method to return an instance of 'Connection' and store the value returned in con1. Then the call to "getAllJobs (con1)" does not work correctly because the instance variable has been initialized. I'm sorry that I you good-for-nothing.

  There is an explanation that is funny, but for education, at this link: http://www.javaranch.com/campfire/StoryPassBy.jsp

  See the part that says:
  >
  A CAT = new Cat();
  doStuff (A);

  void doStuff(Cat B) {}

  B = new Cat(); does NOT affect the reference
  }

  To do this simply 'points' B to control a different object. A is always happy.

• error code 66 A FOR UPDATE

  I get this error whenever I try to update vista error code 66A FOR UPDATE

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

• Error 1400 with "Check for Updates".

  Problems when choosing "Check for Updates" on any version of Adobe Acrobat or Reader.  The actual messages reads "cannot establish a connection. Please try again later. "Error: 1400.

  Updaters worked from this past Friday afternoon, but nothing now.

  Hello

  I think we have found the cause of this problem and solved.

  I hope you find it should work now.

  Henk

• Windows Vista: Error 8000FFFF when checking for updates

  error code 8000ffff

  original thread: 8000FFFF error code when I try to check for upgrades to vista 32

  http://support.Microsoft.com/kb/946414

  Error when you download updates using Windows Update or Microsoft Update: 8000FFFF

  To resolve this issue, try the following methods in the order that they are listed.

  Back to top

  Method 1: Restart your computer and then try to install the updates

  Close all programs that are running, restart your computer and then try to install the updates.

  Note Restarting the computer will ensure that all previous installations are completed and there is no remaining processes that require a system restart until they can be performed.

  If the problem is not resolved, go to method 2.

  Back to top

  Method 2: Save and then delete the registry keys that may cause the problem

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  To use the registry editor to back up and then delete the registry values listed in the "Error Description" section, follow these steps.

  Note These steps are known for this problem that is described in the section "Description of error message. These steps may not solve the problem if Error 8000FFFF code in a scenario which differs from that described in the section "Description of error message.

  1. Click Start
     Collapse this includes this image

     

     .

  2. In the Search box, type regedit.
  3. In the list of programs , click on Regedit.exe.
     Collapse this includes this image

     

     If you are prompted for an administrator password or a confirmation, type the password or click continue.

  4. Locate and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\COMPONENTS
  5. Click COMPONENTS.
  6. Click export.
  7. In the file name box, type COMPONENTS.
  8. The area Save in , click desktop, and then click Save to save the file to your desktop.
  9. In the Details pane, right-click PendingXmlIdentifier, and then click Remove. If this value does not exist, continue to the next step.
  10. In the Details pane, right-click NextQueueEntryIndex, and then click Remove. If this value does not exist, continue to the next step.
  11. In the Details pane, right-click AdvancedInstallersNeedResolving, and then click Remove. If this value does not exist, continue to the next step.
  12. Restart the computer.

  To check if this fixed the problem, go to the "fact this corrects the problem?" section.

  If the above does not resolve the problem, follow the previous advice given.

  See you soon.

  Mick Murphy - Microsoft partner

• Error "Windows cannot check for updates ' 80244019

  I have Win7 Home Premium SP1 - 32-bit installed. Windows update will not check or install giving error 80244019.

  Any help would be appreciated.

  Robear fantastic job!

  Done all the steps above except 8A and everything went well.

  Did a manual search of updates and 63 reviews plus optional 9 found and installed OK.

  KB3175443, KB3178034, KB3177725, KB3167679 all found and installed OK.

  Thanks much Robear for your skill and persistence.

  You are welcome & thank you for your comments. Mark one or more of my previous posts as RESPONSE will officially close your thread (if you care about things).

  

  PS: I wouldn't vote USEFUL or two while you're there either.

  

  These remnants of Norton seem to wreak havoc with Windows, so is there anything I can do, apart from [another application], change to avoid this problem in the future...?

  If you want to stick with Norton, never ever upgrade to the new version (for example, from Norton 360 Norton 360 or Norton Security v23.x v23.x v22.x). Uninstall the current version, download/run a new copy of the removal of Norton & reboot tool and then do a clean install of the new version.

  Or you can switch to another (paid or free) suite anti-virus/security applications (for example, free Microsoft Security Essentials - which will be supported at least until the Extended Support for Win7 ends January 14, 2020).

• Error "Windows cannot check for updates because the service is not running.

  I am using windows vista 64-bit ServicePack two on my laptop. I recently had to install new hard disks. Since then, Windows update does not work. When I check the updates dialog box appears indicating that Windows cannot check the updates because the service is not running. I used the Microsoft fix - it tool, and it recognizes that there is a problem, but cannot fix. History of the update is completely empty. I would appreciate any ideas on how to solve this problem.

  Please read this article:

  http://support.Microsoft.com/kb/2730071/en-us

  Another suggestion is maybe disable the updates of Windows

  Reset.

  Activate the Windows updates.

  Try again. (Worked for some)

  http://Windows.Microsoft.com/en-AU/Windows/turn-automatic-updating-on-off#turn-automatic-updating-on-off=Windows-Vista

• Error code 64 c for update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Have tried to install KB2494113 - update of safety and he constantly fails to install. Help please as I know very little about the "intricacies" of my laptop

  Hi Phillipmuir,

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  You can also check the following link and try to download and install the standalone update package:

  Update of security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Hope this information is useful.

• My computer is saying error occurred when checking for updates. Code 80070424

  I did a system restore, and it does not always help. If anyone knows how to fix this problem please give me some advice.

  Hello

  1. you remember to make changes to the computer before this problem?

  Step 1:

  You can check out the following link and check if it helps:

  Windows Update error 80070424

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070424

  Step 2:

  You can also read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

• Error using IKM SQL for Hyperion Essbase (data)

  Get (last Intnermost): file ' < string >, line 75, in?
  Error 'com.hyperion.odi.common.ODIConstants' attribute class has no attribute 'PRE_LOAD_MAXL_SCRIPT '.
  
  I'm not usiing a pre load a MaxL Script. I even put the 'ABORT_ON_PRE_MAXL_ERROR' to no.
  
  Any help would be appreciated.

  Hello

  You may be using the old java (jar) files in your directory of driver, in the most recent class ODIConstants has been updated to include "PRE_LOAD_MAXL_SCRIPT".

  I would try to install a patch later or a later version of ODI.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error on Aspire Windows ES1-511 - PCI - encryption/decryption controller - 10

  I have problems to address Windows error 28 on this laptop for the above device.

  Device is identified with the yellow triangle with exclamation point

  I tried "Update driver" without success.

  I tried to uninstall the device and rebooting without success.

  I did several searches looking for a driver for this device but have had no success.

  The device itself will appear in the Windows Device Manager under the heading "other devices."  2 other items also appear in this group:

  000eSMS/MMS

  Peripheral Bluettoth device.
  These two are identified with question marks.

  Windows cannot update either of these 2 devices also.

  Windows 10 forums were unable to help with this.

  Any suggestion to fix this error would be appreciated.

  Thanks in advance-

  Terry Davidson

  It may be the old USB dongle.