Error when executing an application

Similar Questions

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• A sound signal when executing an application in a VMWare Image of XP

  When executing an application, I noticed a heinous system Speaker beep whenever I try to use an application. Turned off the coast of all the properties of the system, I was able in the machine of the virtual computer and the system of my laptop, but I still have this terrible noise. Makes the application running in VMWare quite difficult. I was hoping someone knew a solution or keeps doing that. The application, as I have tested, does not that noise when running on the installation of the base.

  XP pro fully updated on local and XP Pro SP2 on virtual image. Using the latest version of VMWare Player.

  I tried to disable the system speaker AND sound card to the level of the local device manager and it does again almost as if VMWare is without going through the local system to use of any resource made this terrible noise.

  Much appreciated!

  I have not tried, but it may be useful?

  http://dotnetforum.dk/blogs/Mac/Archive/2005/11/09/68522.aspx

• has received the error when executed OR .exe to install software OR wihout PC application

  The error received when it .exe application (with references NOR) is run on a PC.

  So I've changed the property NOR references: local copy-> true

  relating to the compilation, always test it, get error if I use another PC without software OR installed.

  After copy / paste all the dll files required in the directory where .exe is located, it works correctly on the machine without MSudio installed.

  I removed the NationalInstruments.NetworkVariable.dll of my project to simply this process.

  then copy all the dll files based on measure XCOPY deployment files Studio .NET

  You don't have to copy/paste the following files (not 3d)

  msvcp80.dll 8
  MSVCR80.dll 8
  Msvcrt.dll 8

  

• Error: dwwin.exe - Application error when executing Fallout2.

  Original title: dwwin.exe - Application error

  Hello
  I get this error when you run Fallout2 on my computer (Win XP SP3)

  dwwin.exe - Application error
  X with the exception of the breakpoint
  A breakpoint has been reached.
  (0 x 80000003) occurred in the location of the 0x7c90120e application.
  Click OK to terminate the program
  Click on Cancel to debug the program.

  When I press Cancel to debug the program, it crashes and I have to ctrl + alt + delete to get the Task Manager to end the process to ensure rear control.

  Any advice on what the problem is & how should I solve this problem?

  Thank you

  Hello

  1. what version of Adobe are you running?

  2. when there is this starting happening?

  3. did you other software on the system changes?

  This error can occur if virtual memory is too high.

  You can check the virtual memory settings.

  Set it to 1 on 1 time and a half the size of RAM installed.

  For more information, you can consult the following article:

  How to set performance options in Windows XP

  Did you installed Dell Quickset?

  If installed, then update the same thing and check.

• Photo not valid error when launching an application

  Hello

  When launching an application through the web browser, I get this weird error.

  Starts the RDP session, the profile starts to connect, and as username and group political stuff ends, I get a little popup with the title 'Quest vWorkspace Shell' and "invalid image" message.  At the bottom of the screen is a pnshell.cmd minimized command prompt that is sitting there until I click OK in the popup mentioned previously.  Once I click OK, then the vWorkspace application will launch successfully.

  The pnshell.cmd has the following inside:

  REM added by RMC to prevent permissions app sprinkled with admins

  c:\Windows\syswow64\Ifmember administrators

  If not ErrorLevel 1 Goto SkipAdmins

  c:\Windows\SysWOW64\pnshell.exe

  I'm on vWorkspace v8.0

  The RDSH is 2008 R2

  Any ideas why I get this error?

  Thank you!

  Nick.

  Hello Terry,

  Thanks for the reply.  We use Sophos, but I added the file C:\Windows\SysWOW64\pnshell.exe to the list anyway, restarted the TS, and it's always as problem.  I also added pnstart.exe to the list too.

  I noticed now that this happens only to a specific user.  Other users seem to be the problem... So... don't know why, but I hope it's a?  If you have any ideas why I would be eager to hear.

  Thank you

  Nick.

• "JNDI name is already in use" error when deploying ADF Application after the deployment of Interface of AM Service

  Hello

  12.1.3 JDeveloper / WLS 12.1.3 / Windows 7 64-bit OS.

  I am facing the problem that is mentioned in the following post.

  https://community.Oracle.com/thread/2284290

  I created a simple ADF page with the data to display in the Employees table. The page works fine.

  I added a custom method to the AM and a profile of "Business Service Interface components" deployment of the AOS.

  When I'm trying to deploy the stand-alone WLS Service, it gives the error below.

  If I deploy only the AM Service interface, the web service deployment is going very well.

  If I cancel the deployment of the AM Service and deploy ADF EAR, then it also works very well.

  But if I deploy the AM Service and then try to deploy the EAR, then it gives the error below.

  And vice versa, if I deploy EAR application, and then deploy the AM service, it gives the error below.

  It was working fine until 11.1.1.7.

  I have done this repeatedly for a long time and wasn't any problem in 11.1.1.7 deployments.

  If something has changed in 12.1.3?

  Even if the AM Service is existing, it is deployed in the same application, it should be able to just crush?

  Here are the results with different versions

  11.1.1.7 - domain of the ADF - Standalone Server - works fine

  11.1.1.7 - SOA - Standalone Server - domain works very well

  12.1.3 - error field - integrated WLS - ADF

  12.1.3 - error field - independent server - SOA

  (The foregoing analysis is based on a simple project ADF as a point of Contact for that matter).

  Real-world scenario

  --------------------

  We need this because ours is a BPM Application and the Composite depends on the AM Service, so the AM service must first deployed in the field of the SOA.

  Then, we make the process as well as the ADF UI for task forms. ADF project depends also on the model project

  We get the error during the deployment of the BPM project and the ADF UI project below.

  Error

  -----

  Unable to deploy EJB: ModelEJB.jar model.common.HRAMServiceBean:

  [EJB:011055] The EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar) ", the JNDI name" HRAMServiceBean #model.common.serviceinterface.HRAMService "is already in use." You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  [12: 02:07] caused by: java.lang.Throwable: substituted for the missing class [EJB - 11055] the EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar)', the JNDI name "HRAMServiceBean #model.common.serviceinterface.HRAMService" is already in use. You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  Thanks for any help

  Sameer

  Found a workaround for this problem.

  I don't have to do this in 11.1.1.7 well!

  You don't know if it's the right solution or not!

  If anyone of you knows a better solution, please share.

  I did the 2 following things.

  a. classes of the AM Service Interface of removed files from deployment profile filters

  ViewController project-> properties-> deployment profile--> filegroups--> WEB - INF / classes-> filters

  : Uncheck * Service *. * files (4 - Service.class, Service.wsdl, Service.xsd, ServiceImpl.class)

  b. deleted the deployment profile of library jar ADF for the model project

  Model project-> properties-> deployment

  : Remove the deployment of ADF library jar files profile

  And now I am able to deploy time interface AM Service and application.

  It works for me because I won't need to deploy the AM Service interface again while deploying the process / code of the ADF.

  Since I will deploy the Service Interface of first Business components separately.

  Thanks and greetings

  Sameer

• Error when executing the convertersamples.exe for converter Standalone command line 5.5

  Hello

  I use the latest SDK Standalone.  I use the default convertersample file.  Here is my file of properties.

  physicalsource. Address =

  physicalsource. UserName = *.

  physicalsource. Password = *.

  physicalsource. OSTYPE = windowsOs

  physicalsource.agentport = 9089

  physicalsource. Thumbprint =

  physicalsource.reboot = false

  vcserver. Address =

  vcserver. Thumbprint =

  vcserver.username = root

  vcserver. Password = *.

  conversion.job.Name = 1

  conversion.job.Description = This is a work of P2V Windows Live

  conversion.vmtocreate.Name = VM15

  conversion.vmtocreate.vCPU = 1

  conversion.vmtocreate.Memory = 4098

  converterserver. Address =

  converterserver. UserName = Administrator

  converterserver. Password = *.

  After that I run the following command

  c:\Users\Administrator\Desktop\P2V\Upload\ > ConverterSamples.exe submitwinp2vjob.properties

  I get the following error

  To proceed with the connection to the destination server?

  (Enter [y] ES, [n] o or [c] ancel): > y

  Caught exception:

  Name: WebException

  Message: The operation has timed out

  Trace: At System.Web.Services.Protocols.WebClientProtocol.GetWebResponse (we

  bRequest request)

  at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse (WebRequ

  application of the East)

  at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke (String methodN

  SOUL, Object [] parameters)

  to (Ma ConverterApi.ConverterService.ConverterServerConversionManagerCreateJob

  nagedObjectReference _this, spec, Obj ConverterServerConversionConversionJobSpec

  extraInfo ect)

  at ConverterSamples.ConverterConnection.SubmitJob (ConverterServerConversionCo

  nversionJobSpec jobSpec)

  ERROR: Impossible to present the work of P2V Conversion.

  But when I opened the converter I see a running job where it says it will take 1 day 19 hours to complete.

  And I have the following queries

  1. Why do we say it will take so long?

  2. If the work has successfully started why do I get the error when I run the above command.

  3. also the vcenter we use support vmx 8 but the new converter creates vmx10. So, what is the setting in the properties file to specify the converter to use vmx 8.

  Any help would be very useful.

  Thanks and greetings

  Debs

  Hello

  The time-out and the conversion time long expected that both point to a slow network. Check your environment.

  The hardware version of destination is not in the properties file, you must change the code. Search for BuildCloningParams in the program, cs and set targetVMSpec.hardwareVersion to 'vmx-08'

  In general I advise to use improved samples (Re: samples improved c# SDK) they are much more configurable, but in the case of the destination hw version also are not.

  Concerning

  Plamen

• Core of CBWMS JavaScript error: "when executing translateCustomControl in ExternalRenderers.htm...". »

  Since the October release upgrade I get this dozens of times a day error. It seems to happen when changing window that is developed to another program, while in the middle of saving a file in DW. There is a JavaScript error IN the code base of Dreamweaver, it has nothing to do with any file that I am trying to change, sometimes little any type of file, I work in and/or save.

  Here is the error message: "when executing translateCustomControl in ExternalRenderers.htm, a JavaScript error occurred." It is not always the translateCustomControl function, but it is always in the file ExternalRenderers.htm.

  I use Dreamweaver CC 2014 on Windows 8.1

  Any help is appreciated... Thank you!

  I remember well, it is a bug, and someone mentioned previously.

  If I were you, I would like to send a bug report to:

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform&loc=en

• Implementation error when executing load interface to Essbase data.

  When executing an interface to Essbase data loading I get this error:
  rg.apache.bsf.BSFException: exception of Jython:
  Traceback (most recent call changed):
  File "< string >", line 26, < module >
  at com.hyperion.odi.essbase.ODIEssbaseDataWriter.loadData (unknown Source)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  
  at java.lang.reflect.Method.invoke(Method.java:597)
  
  
  com.hyperion.odi.essbase.ODIEssbaseException: com.hyperion.odi.essbase.ODIEssbaseException: invalid column type specified for the column of data [ActivityPurpose]
  
  The data store is reversed using the RKM Hyperion Essbase, I did not any changes in the data store.
  I'm loading from an identical to the tabel of target array.
  I use the IKM SQL for Hyperion Essbase (DATA).
  
  Does anyone have any idea what this might be?
  
  Concerning
  Hans-Petter

  Might be useful to have a read of the following doc Oracle Support - "how to avoid signs of ' ODIEssbaseException: invalid column type specified for the data column" Message When loading Essbase models ODI? ". [ID 885608.1] »

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error when downloading an application of newsstand

  I get an error when downloading my zip file "in Itunes Connect, newsstand is activated for your version of the App." The Info.plist file must include UINewsstandApp = true and CFBundleIcon dictionary must be specified. WHAT? How can I do this? I use DPS and am in no way a developer or anything close to it. I did cela a free subscription, I don't know where t make this change.

  Looks like you said your application supports newsstand when you created the application in Apple iTunes connect, but when you use App Builder you have not selected "Multi problem with iTunes subscription" for the type of app on the app details page.

  Remove the kiosk of the list of the things you told Apple support you in iTunes Connect, or make a new application in App Builder and make sure it has "Multi problem with iTunes subscription", selected as the type of app.

  Neil

• Error when creating an application of FDM on SQL Server 2005

  Hello
  
  We receive this error when you create an application of FDM on SQL Server 2005
  
  
  Error: EPMCSS-07003: unable to validate identity. Invalid identity. Verify the identity. [SET_ROLES_LIST]
  
  
  We use the integration of Windows system even if we also tested with the user's.
  
  Any ideas?
  
  Thank you

  Based on the error message that seems to have a problem of Shared Services. Check that the "ADMIN" account is used for the connection of HSS and that you are using "ADMIN" to create the application and see if the same error is returned.

• Error when executing fn - bea: inlinedXML

  Hi all

  I get the error when you attempt to perform an action to assign to the Service Proxy OSB below message flow. In the action of the claimant, I do fn - bea:inlinedXML($body/*)

  the next error in the newspaper is

  # < 08/06/2013-15:34:05 CEST > < error > < ALSB Logging > < dili > < osb_admin > < ExecuteThread [ASSETS]: '16' for queue: '(self-adjusting) weblogic.kernel.Default' > < < anonymous > > < BEA1-7BDF80E04144 > < 11d1def534ea1be0:75fd2fd6:13ea8708939: - 8000-0000000000096029 > < 1375796045200 > < BEA-000000 > < [PipelinePairNode1_request, ExtractCorrelationInformation, PipelinePairNode1, ERROR] order_event_invalid: command event has invalid format

  
  

  content of $body is

  
  

  < IRISEvent >

  < OrderHeader >
  < CustomerName > mortenEgeriis-shift < / CustomerName >
  < OrderId > ESV0700000671 < / OrderId >
  < OrderStatus > SHIPPED < / OrderStatus >
  < ShipDate > 6 August 13 < / ShipDate >
  < TrackTrace > < / TrackTrace >
  < / OrderHeader >
  <>lines
  ESV0700000671_1 < LineId > < / LineId >
  < ItemName > Velkomst Kit Privat < / ItemName >
  < ItemNum > 338739 < / ItemNum >
  < quantity > 1 < / quantity >
  < SerialNum > 89450109010803430958 < / SerialNum >
  < / lines >
  <>lines
  ESV0700000671_2 < LineId > < / LineId >
  < ItemName > 5 white 16 GB iPhone < / ItemName >
  < ItemNum > 343654 < / ItemNum >
  < quantity > 1 < / quantity >
  < SerialNum > < / SerialNum >
  < / lines >
  <>lines
  ESV0700000671_3 < LineId > < / LineId >
  < ItemName > Nano On-Line USIM & CSP (B) < / ItemName >
  < ItemNum > 343542 < / ItemNum >
  < quantity > 1 < / quantity >
  < SerialNum > < / SerialNum >
  < / lines >
  < / IRISEvent >

  $fault displays as BEA-382510OSB Assign action failed variable update 'contentXml': com.bea.wli.common.xquery.XQueryException: XML parsing error: {err} FODC0002 [{bea - err} FODC0002b]: parsing XML 'inlinedXML' of entry error: error on line: 25 col: 31 ' "expect a character name valid start PipelinePairNode1PipelinePairNode1_requestExtractCorrelationInformationrequest-pipeline >"

  
  

  Please can anyone suggest why this error occurs.

  
  

  Thanks and greetings

  Frank Michael Simon
  

  There is '&' in your last knot of lines

  Nano USIM online & CSP (B)

  It is not support delete & here and try again. And same question Abhishek asked, your body content is already in XML format, why do you use the inlinedXML function?

  Kind regards

  Karan

  Oracle Fusion Middleware Blog

• Get the linker error when executing our code in InDesign CC

  Hello

  We are modernizing our plug-ins for Adobe InDesign CC. In that we are facing a problem (the linker error) when running our code,

  1 > AssetCustomView.obj: error LNK2019: unresolved external symbol "public __declspec (dllimport): virtual __thiscall DVControlView: ~ DVControlView (void)" (__imp_? 1DVControlView@@UAE@XZ) referenced in the function __unwindfunclet$? 0AssetCustomView@@QAE@PAVIPMUnknown@@@Z$0

  1 > AssetCustomView.obj: error LNK2019: unresolved external symbol "public __declspec (dllimport): __thiscall DVControlView::DVControlView(class IPMUnknown *)" (__imp_? 0DVControlView@@QAE@PAVIPMUnknown@@@Z) referenced in function "public: __thiscall AssetCustomView::AssetCustomView(class IPMUnknown *)" (? 0InCatAssetCustomView@@QAE@PAVIPMUnknown@@@Z)

  1 > AssetCustomView.obj: error LNK2001: unresolved external symbol "public: class virtual IPMUnknown * __thiscall AbstractControlView::QueryInterface (class < struct PMIID_tag > IDType) const"(?) ". QueryInterface@AbstractControlView@@UBEPAVIPMUnknown@@V? $IDType@UPMIID_tag@@@Z)

  1 > AssetCustomView.obj: error LNK2001: unresolved external symbol "public: virtual void AbstractControlView::AddRef (void) const '(?) __thiscall. AddRef@AbstractControlView@@UBEXXZ)

  1 > AssetCustomView.obj: error LNK2001: unresolved external symbol "public: virtual void AbstractControlView::Release (void) const '(?) __thiscall. Release@AbstractControlView@@UBEXXZ)

  1 > AssetCustomView.obj: error LNK2001: unresolved external symbol "public: class virtual IDType < struct WidgetID_tag > __thiscall AbstractControlView::GetWidgetID (void) const"(?) ". GetWidgetID@AbstractControlView@@UBE? AV? $IDType@UWidgetID_tag@@@XZ)

  1 > AssetCustomView.obj: error LNK2001: unresolved external symbol "public: class virtual PMRect const & __thiscall DVHostedWidgetView::GetFrame (void) const"(?) ". GetFrame@DVHostedWidgetView@@UBEABVPMRect@@XZ)

  1 > AssetCustomView.obj: error LNK2001: unresolved external symbol "public: virtual void __thiscall DVHostedWidgetView::Resize (class PMPoint const & short)" (?) Resize@DVHostedWidgetView@@UAEXABVPMPoint@@F@Z)

  1 > AssetCustomView.obj: error LNK2001: unresolved external symbol "public: virtual void __thiscall DVHostedWidgetView::Invalidate(class PMRect *)" (?) Invalidate@DVHostedWidgetView@@UAEXPAVPMRect@@@Z)

  1 > AssetCustomView.obj: error LNK2001: unresolved external symbol "public: virtual void __thiscall DVHostedWidgetView::Show (short)" (?) Show@DVHostedWidgetView@@UAEXF@Z)

  1 > AssetCustomView.obj: error LNK2001: unresolved external symbol "public: virtual void __thiscall DVHostedWidgetView::Hide (void)" (?) Hide@DVHostedWidgetView@@UAEXXZ)

  1 > AssetCustomView.obj: error LNK2001: unresolved external symbol "public: virtual void __thiscall DVHostedWidgetView::Enable (short, short)" (?) Enable@DVHostedWidgetView@@UAEXFF@Z)

  1 > AssetCustomView.obj: error LNK2001: unresolved external symbol "public: virtual void __thiscall DVHostedWidgetView::Disable (short)" (?) Disable@DVHostedWidgetView@@UAEXF@Z)

  Help us please if anyone has idea about this error.

  Thank you

  Vimala L

  Hi Vimala L,.

  under Windows, you need to add the DV_WidgetBin.lib library to your library includes or just use $UI_PLUGIN_LINKLIST macro that contains this library.

  On Mac, it is included in the framework.

  Markus

• get the error when executing application of ODI

  Hello
  try to be more clear, I am in lack of ideas in this problem...
  I am new to ODI, I installed ODI.
  I am able to go read the table in the TEMPLATE tab, I'm able to drag and drop the table in 'Panel of source and target.
  I created the map.
  My Ikm: incremental update of the IKM oracle
  LKM:Oracle to oracle (dblink)
  CKM:CKM oracle
  When I run the pop-up box application.a appear on display this "session has begun.
  My source and target database: oracle
  In 'operator' status of the module is red for action 'create the synonym for target '.
  In the "performance" tab, it is written that ' * 1729: 42000: java.sql.SQLException: ORA-01729: database link name expected. "
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
  at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
  at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
  at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
  at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
  at com.sunopsis.sql.SnpsQuery.executeUpdate (SnpsQuery.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt (SnpSessTaskSqlC.java)
  at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
  at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
  at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
  at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
  at com.sunopsis.dwg.cmd.e.i (e.java)
  at com.sunopsis.dwg.cmd.g.y (g.java)
  at com.sunopsis.dwg.cmd.e.run (e.java)
  at java.lang.Thread.run (unknown Source.
  I spent hours trying to play around with this, but had nowhere.
  How can I remove error.
  Any help is very appreciated

  Hello

  You ' r are welcome.

  Please close the points wire and assign (useful/correct) to each thread accordingly you think.

  Thank you
  G