Error when I run the ship confirm

Similar Questions

• I am trying to change my product key and get a 0x800402c9 error when I run the product key Wizard

  Update product key

  I'm trying to change my product key and get a 0x800402c9 error when I run the product key Wizard, so I am unable to enter the product key

  You must acquire the recovery discs right from the manufacturer - if you're lucky, your office don't reinstall it properly and leave you with the recovery partition that would do the same job.

  Read your manual, on the recovery of the system and try the options there.

  If they do not work, you will need to contact it manufacturer and order a set of htem recovery disks.

• Re: "insufficient privileges" error when you run the Java stored procedure in another schema

  I get an "insufficient privileges" error when you run the Java stored procedure in another schema, see details below.  I don't know what are missing privileges (I already granted the EXECUTE privilege), suggestions?  -Thank you.

  Define a simple java class and deploy it as a Java stored procedure to test:

  
  

  Schema: User1

  test of the package;

  public class HelloWorld {}

  public HelloWorld() {

  Super();

  }

  public static String Hello () {}

  Return "HELLO";

  }

  }

  CREATE or REPLACE FUNCTION HELLO RETURN VARCHAR2 AUTHID CURRENT_USER AS LANGUAGE JAVA NAME ' test. HelloWorld.hello () return java.lang.String';

  Grant execute on USER2 HELLO

  Test the Java stored procedure through the PL/SQL function call (in the same schema):

  
  

  Schema: User1

  SET SERVEROUTPUT ON

  DECLARE

  v_Return VARCHAR2 (200);

  BEGIN

  v_Return: = User1. HELLO;

  DBMS_OUTPUT. Put_line ('v_Return =' | v_Return);

  END;

  anonymous block filled

  v_Return = HELLO

  Test the Java stored procedure through the PL/SQL function call in a different pattern:

  
  

  Schema: USER2

  SET SERVEROUTPUT ON

  DECLARE

  v_Return VARCHAR2 (200);

  BEGIN

  v_Return: = User1. HELLO;

  DBMS_OUTPUT. Put_line ('v_Return =' | v_Return);

  END;

  Error report-

  ORA-01031: insufficient privileges

  ORA-06512: at "User1." HELLO', line 1

  ORA-06512: at line 4 level

  01031 00000 - "insufficient privileges".

  * Cause: An attempt was made to change the user name or password

  without the privilege appropriate. This error also occurs if

  trying to install a database without the need for employment

  access privileges.

  When Trusted Oracle is configure in DBMS MAC, this error may occur

  If the user has been granted the privilege necessary for a higher label

  that the connection is active.

  * Action: Ask the database to perform the operation or grant administrator

  the required privileges.

  For users Trusted Oracle get this error, well that granted the

  the privilege that is suitable for the top label, ask the database

  administrator to grant the privilege to the appropriate label.

  You have created the function with AUTHID CURRENT_USER, which means that the function is executed with the rights of the applicant (but not with the rights of the author). This means that the applicant must have grants (directly or through roles) on all used/accessible objects in the service. In your case the user USER2 has not granted with EXECUTE on the class/source Java test. Class HelloWorld, causing the ORA-01031 exception. You create service without AUTHID CURRENT_USER (i.e. with AUTHID DEFINE, which is by default, if you do not have a specific reason to use AUTHID CURRENT_USER) or grant EXECUTE on JAVA test SOURCE. Class HelloWorld to User2.

  Dimitar

• Error when you run the setEssbaseEnv.sh script

  Hi all

  In the 11.1.2.x version:

  MIDDLEWARE_HOME/EPMSystem11R1/products/Essbase/EssbaseServer/templates/startMaxl.sh

  Scripts call another script, setEssbaseEnv.sh. When you run the script 'setEssbaseEnv.sh' it gives the error below:

  $ sh setEssbaseEnv.sh

  setEssbaseEnv.sh: line 4: close syntax error unexpected token ' (')

  setEssbaseEnv.sh: line 4: "cd $J (EPM_ORACLE_INSTANCE) / bin /".

  Why use only the location of the templates? There should be a bin folder.

  Concerning

  Celvin Kattookaran

• I/o device error when you run the backup

  I'm trying to run a backup of a Dell Inspiron with Windows 7 on a Toshiba 500 G hard drive.  When I start the backup everything looks good, the backup is running.  He has worked for several hours and then he said: the backup could not be completed.  When I check on 'additional information' it says there is a "device i/o error." there only are data downloaded to disk, but I do not have what has been saved.  The drive is new and I checked all the connections.  Any thoughts?

  We have to run a disk check to solve this problem, to do a disc check follow the steps below:

  1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. at a command prompt, type the following command and press ENTER:

  CHKDSK X: /R

  Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.

  3. press y when you are prompted to check the drive the next time the system restarts.

  4. close all applications and restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.

  You can also check out the link below:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  I hope this information is useful.

  Please let us know if you need further assistance.

• 88302 error when you run the SMU 6674 t

  Hello

  I had two chassis SMU 1085, that each of them has a 6674 t module installed in the housing of timing.

  Timing modules appear in the MAX, but

  I get the 88302 internal error has occurred message when I try to do self - test, run the test Panel.

  The synchronization OR installed version is 3.3.5 what I belieave is the largest leatest.

  Any suggestions on how to help me solve this problem and get my operational module would be wellcome.

  Thank you

  Maciej

  Maciej salvation,

  The NO-Sync 3.4.1 version became operational today. Since NEITHER-Sync 3.3.5 we fixed some issues that may affect the SMU-6674 t driver initialization. You could try to install NO-Sync 3.4.1.

  Kind regards

  -Tyler

• BIOME-1 error when you run the diagnostic material for RAM test

  In recent months I've known several blue screen errors during startup. Initailly, initially, I thought that maybe it's a hardware error, but after running Diagnostics of material (press F9 to start) and have all the tests passed so I assumed it was a software problem, I focused my attention on that. However, today, I started to run hardware diagnostics and I discovered that I had a RAM issue with the BIOME-1 error code. Is it possible that the hardware diagnostics can not full capture errors and that a RAM issue was first the cause of blue screen errors?

  I called HP support and they sent an engineer to the bottom. After you open the computer case, the cause of the problem has been established as a RAM module that was not properly secured. After getting the RAM module, the blue screen errors did not reappear again. The engineer also ran some tests and confirmed that everything was fine.

• Qosmio F30-112 - an error when you run the recovery disk, the error code is 4

  It appears whenever I put the toshiba recovery disc after loading of the VIRTUAL disk image

  "File\i386\System32\ntoskrnl.exe could not be loaded.
  The error code is 4
  Setup cannot continue. Press any key to exit. »

  Does anyone have a solution to this problem?

  Thank you...

  Hi ianzro,

  I m not very well why this happened, but to me it sounds like that files on Toshiba recovery disc can be read correctly.
  Maybe the disc is scratched or else

  You can reinstall Windows using a disc of Microsoft?

• This operation is limited by the administrator of the error when you run the command get-stats

  I have a script that use to collect monthly performance report - but after the upgrade of the CR, the script fails with the error below

  Get-Stat, this operation is limited by the administrator - "vpxd.stats.maxQueryMetrics". Contact your system administrator.

  I tried after the Ko -https://kb.vmware.com/kb/2107096 , but I don't see the webclient service performance

  Please notify

  As you use the API and not the Web Client, you need only modify the value in the advanced settings of vCenter.

  This can be done with

  Note that the value of-1 disables the limit altogether.

  The default value is 64.

  Get-AdvancedSetting - YourvCenter of the entity-name config.vpxd.stats.MaxQueryMetrics |

  Game-AdvancedSetting - value - 1

• weird error when I run the script...

  Hi all
  I am running a script script that needs to insert data into tables.
  We are the merger of process from one application to another.
  The code that I have performed in an environment works fine and creates data, how ever if I run following it will insert all the data and shows some unique_constraint_error.
  
  ORA-00001: unique constraint (schema_name.constraint_name) violated
  
  I have searched the constraint in all tables (all_constraints, user_constraints, dba_constraints..) of all dev, test, or production environment patterns in the two applications but I don't get this constraint_name.
  I really need help gurus... and thank you everyone who their response time in this forum :) of spare parts

  HTH... Search for unique indexes, they are responsible for a constraint unique voilation.

• VISA: (Hex 0xBFFF001) timeout expired before the operation is complete. I get this error when you run a VI (instrument is set up to be controlled remotely using the TCP/IP Protocol)

  VISA: (Hex 0xBFFF001) timeout expired before the operation is complete. I get this error when you run a VI (instrument is set up to be controlled remotely using the TCP/IP Protocol)

  Please suggest a solution.

  Thank you very much, it worked!

• Windows Update keeps just check updates, when I run the fixit utility, I had error, update code error 0 x 80070005(2015-08-01-T-09_15_07P). Help, please.

  Windows Update keeps just check updates, when I run the fixit utility, I had error, update code error 0 x 80070005(2015-08-01-T-09_15_07P).  Help, please.

  The last thing installed on windows update is Windows Update Agent 7.6.7600.320, but it seems to have installed correctly.  I tried a lot of different things in the forums, but nothing works.  Please notify.  Thank you.

  Just found the solution.  I needed to update my version of Internet Explorer.  I used 8 and just updated to 11.  Problem solved.  Updates work again.

• I wore a work Application TV live Android-based BlackBerry App. When I run the app on simulator.iam BB10 see the following error

  When I run the app it shows first of all my wallpaper or the Welcome screen

  as shown in 1st.jpg

  

  Then after a few seconds, second page will display the page connection as 2 .jpg

  

  After loggin with my facebook account it will show the list of channels like 3rd.jpg

  as below

  

  When I click on the above content as stated in the 3rd.jpg

  IAM, seeing the error as below: correct my problems and guide me how to run my application perfectly.

  

  You must test with the Simulator 10.2 as well, absolutely.

  Yes, you need to download Android 2.3.3. Since the SDK Manager.

  Then, choosing it as a target in the properties for your project you can expect to get compilation errors. It will indicate the parts in the source code that must be changed or adapted to be compatible with the level of the API 10, respectively to allow your application Android runs correctly on the 10.1 BB Android Runtime (and probably on PlayBook as well).

  Here you have an article about it on the ActionBar compatibility in Android:

  http://blog.imaginea.com/Android-handling-ActionBar-compatibility-issues/

• I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  original title: Setup error.

  I want to install a program, but when I run the setup I have this error displays "an error (-5006: 0x8000ffff) occurred while runnig the Setup program."

  Please make sure you have finished any previous Setup and closed other applications. If the error persists, please contact your dealer.

  I solve the problem... All the error is the file. I don't know but he corrupted and I deleted it.

  I have download it again and the problem was solved. Thanks to you all.

• I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

  I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

  For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

  Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

  So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

  So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.