Error when running the report EN

Similar Questions

• What are the answers of code of HD521-2W SMART short self-test error when running the diagnostics?

  1 HP Pavilion a4310f, product # AY014AA-ABA, software Build A1NAv6PrA1

  2. Microsoft Windows 7 Home Premium (64-bit) Edition

  3 a receipt the "Failed SMART short self-test HD521-2W" when executing Hardware Diagnostic tools.  Error message:

  Error message the device reported the following State: the previous self-test completed having the read element of the test failed. 01/12/2012-06:21:01

  The first LBA value failure Error Message is 440642933 and the failure occurred after that the device was working since 7943 hours under tension.

  01/12/2012-06:21:01

  4. I made no changes to my system for over a month.

  Device: Hard disk WDC WD64 00AAKS-65A7B SCSI Disk Device, the revision of the firmware 01.03B01

  This unit is my hard drive (it is in factory with partitions C: and D: {Factory Image})

  Hello

  The Smart error code would indicate that the hard disk is running out and must be replaced.  If you want a guide on this, let me know.

  Kind regards

  DP - K

• Get failure catastrophic error when running the system restore

  Original title: System Restore

  When I try to use the system restore I get a message syaying that system restore did not complete - this error 0 x 80070057 and he SIAS catastrophic failure

  Anyone knoe what to do to fix?

  Thank you

  Maggie

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-restore-error-0x80070057/0b8c7c81-3fe9-4D43-8369-1a41a5756171

  It will be useful.

• Error when running the BIOS update HP Healthcheck: "Code 800A01A8".

  Original title: I am trying to run BIOS update HP Healthcheck and get this error

  I am trying to run BIOS update HP Health check and get this error
  C:\Windows\help\OEM\scripts\HC_VistaSP1BIOSUpdate.JSE
  Line: 458
  Char: 2
  error: object required
  Code: 800A01A8
  Source: Microsoft Jscript runtime error

  Please take a look at this with a Microsoft Fix It tool Microsoft Knowledge base article to resolve this issue.

  You can also take a look at this thread with a similar problem.

• Error when running the app studio Site

  To create a Site Studio application, I followed the tutorial below
  
  http://docs.Oracle.com/CD/E14571_01/ doc.1111 /e13650/ssxa_creatingsites.htm
  
  But during the execution of the startSiteStudioDemo.jspx, I got the following error
  
  oracle.stellent.wcm.client.ApplicationException: no matches not found for model name '@ssd-home-pt.
  
  Could someone please advise on this?
  
  Thank you and best regards,
  Vishnu

  Check if you have saved the file /wcm/templates/page/home.jspx as a SSXA page template:

  1) navigate to the file /wcm/templates/page/home.jspx in the project in JDeveloper hierarhy.
  (2) right click on the file and open the submenu "Site Studio" from the context menu;
  (3) if the menu item "Save the Site file" is enabled, then you have not saved it. Menu start this menu item and move forward toward the front in order to save it.

  Tip: If you are already registered to it, then you should see the text [ssd-home-pt] next to the file name. (Check if you have specified the good id, for example the ssd-home-pt). You can check the recording in the /WEB-INF/wcm-config.xml descriptor. Open this descriptor and go in ' Mappings / Page Templates.

  Dimitar

• ORACLE 1012 in FDPCLS error when running the payroll process

  Hi, all.
  
  * Server Oracle 10.2.0.5.0 on RHEL5 (single node) *.
  * Oracle ERP Apps 11.5.10.2 on RHEL5 (single node) *.
  
  
  Recently I cloned my existing PROD DEV environment. The database works now on a NEW server application server is always the same.
  
  I found * Metalink node [277148.1 ID] * on this issue and suggested to review the tnsnames file settings. I already checked that the tnsnames.ora file contains correct information and reflects the server name correct db.
  
  Please let me know where to check for an old database server entry that I should fix... Thank you!
  

  **ORACLE error 1012 in FDPCLS**
  **Cause: FDPCLS failed due to ORA-01012: not logged on**
  
  *The SQL statement being executed at the time of the error was: and was executed from the file.*
  */erp1/appsvr/erpappl/pay/11.5.0/bin/PYUGEN*
  *Program exited with status -l*

  If please bounce the database and the database listener and then try.

  You can find errors in the database log file?

  */ERP1/appsvr/erpappl/pay/11.5.0/bin/PYUGEN*

  Create a link to this executable file through adadmin or manually, and then try again.

  Thank you
  Hussein

• Error when running report in oracle applications

  When running the report in oracle applications, I am getting below error
  
  Arguments
  ------------
  AS_ON_DATE =' 2013/03/21 00:00:00 '
  sdate =' 01/04/2012 00:00:00 '
  EDATE =' 2013/03/31 00:00:00 '
  ------------
  
  Obliging NLS_NUMERIC_CHARACTERS to: '.,' for the treatment of OPE
  
  APPLLCSP Environment Variable to:
  
  NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are:
  American_America.AL32UTF8
  
  '.,'
  
  Enter the password:
  REP-0004: WARNING: could not open the file of user preferences.
  REP-0300: ORACLE error occurred.
  REP-0069: internal error
  REP-57054: work in progress completed: completed with error:
  REP-300: ORACLE error occurred.
  
  I tried to run the same report in Report Builder, it works according to the condition. But it does not work in oracle applications.
  
  Help, please.
  Thanks in advance.

  Hello
  To resolve the warning (REP-0004: WARNING: could not open the file of user preferences), copy the file prefs.ora to your report builder $ORACLE_HOME/tools/admin/directory in the directory $HOME of the Applications.

  Please do the above step after that, if you get an error, please paste the same thing here.

  Select this option if this helps you.

  Kind regards
  Kishore

• Error when running Balance of audit-cannot find qualifier flexfield

  Hello

  For a fresh implementation, I get the below error when running a report of the trial balance.

  

  

  Segments

  

  

  

  Is it because I have not checked the right justification and zero numbers filled in all of the value?

  Please advise

  Hello

  Use the segment seq. 1, 2, 3... rather than use the segment seq. 10,20,30. This should solve your problem. Accounting Flexfield allows no gaps in the sequence of the segment.

• error when exporting large report on the PDF in OBIEE 11.1.1.6.12

  Hello

  We have great report should be exported to PDF, I have change some setting like below:

  In the Config.xml file that is located in \BI_Home\instances\instance1\config\OracleBIJavaHostComponent\coreapplication_obijh1\, change

  < XMLP >

  < InputStreamLimitInKB > 32768 < / InputStreamLimitInKB >

  < ReadRequestBeforeProcessing > true < / ReadRequestBeforeProcessing >

  < / XMLP >

  in xdo.cfg, replace

  < property name = "system-temp-dir" > c:\temp < / property >

  the correct path

  After this adjustment, I am able to export reports to PDF, but the records of more than 10000, it throws the error in sawing:

  [2015 03-27 T 10: 51:29.000 - 04:00] [OBIPS] [ERROR: 16] [] [saw.rpc.mis.read] [ecid: 6314d6274a0b62d0:3aa2f498:14bec1dc796: - 8000-0000000000048471, 0:1] [tid: 2312] RPCServer returned an error: error when running PDFRpcCall.processMessage

  oracle.xdo.XDOIOException: com.siebel.analytics.utils.InputStreamWithLimit$ ReadOverTheLimitException

  at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1065)

  at com.siebel.analytics.web.javahostrpccalls.xmlp.XmlpAbstractRpcCall.processMessageInternal(XmlpAbstractRpcCall.java:71)

  at com.siebel.analytics.javahost.AbstractRpcCall.processMessage(AbstractRpcCall.java:251)

  at com.siebel.analytics.javahost.MessageProcessorImpl.processMessage(MessageProcessorImpl.java:193)

  to com.siebel.analytics.javahost.Listener$ Job.run (Listener.java:223)

  at com.siebel.analytics.javahost.standalone.SAJobManagerImpl.threadMain(SAJobManagerImpl.java:207)

  to com.siebel.analytics.javahost.standalone.SAJobManagerImpl$ 1.run(SAJobManagerImpl.java:155)

  at java.lang.Thread.run(Thread.java:662)

  Caused by: com.siebel.analytics.utils.InputStreamWithLimit$ ReadOverTheLimitException

  at com.siebel.analytics.utils.InputStreamWithLimit.incTotalBytes(InputStreamWithLimit.java:58)

  at com.siebel.analytics.utils.InputStreamWithLimit.read(InputStreamWithLimit.java:49)

  at java.io.BufferedInputStream.read1(BufferedInputStream.java:256)

  at java.io.BufferedInputStream.read(BufferedInputStream.java:317)

  at oracle.xdo.common.io.FileUtil.writeLargeFile(FileUtil.java:75)

  at oracle.xdo.template.FOProcessor.xmlDataSave(FOProcessor.java:2229)

  at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1050)

  ... 7 more

  [[

  Leader: RPC.cpp

  Online: 473

  Geographical area:

  Saw.RPC.mis.Read

  Saw.Subsystem.Portal.pdf

  Saw.httpserver.ProcessRequest

  Saw.RPC.Server.Responder

  Saw.RPC.Server

  saw.rpc.server.handleConnection

  Saw.RPC.Server.Dispatch

  Saw.ThreadPool.socketrpcserver

  Saw.threads

  SessionID: 6hj63tlcl14h5jfa8m9dacbmgea1frjsndqc6ta

  AuthProps: AuthSchema = UidPwd | PWD = * | UID = wei | User = wei

  ECID: 6314d6274a0b62d0:3aa2f498:14bec1dc796: - 8000-0000000000048471, 0:1

  ThreadID: 2312

  HttpCommand: go

  ]]

  [2015 03-27 T 10: 51:29.000 - 04:00] [OBIPS] [ERROR: 31] [] [saw.rpc.mis.read] [ecid: 6314d6274a0b62d0:3aa2f498:14bec1dc796: - 8000-0000000000048471, 0:1] [tid: 2312] a fatal error occurred during the processing of the request. The server responded with: com.siebel.analytics.utils.InputStreamWithLimit$ ReadOverTheLimitException. [[

  Leader: RPC.cpp

  Online: 479

  Geographical area:

  Saw.RPC.mis.Read

  Saw.Subsystem.Portal.pdf

  Saw.httpserver.ProcessRequest

  Saw.RPC.Server.Responder

  Saw.RPC.Server

  saw.rpc.server.handleConnection

  Saw.RPC.Server.Dispatch

  Saw.ThreadPool.socketrpcserver

  Saw.threads

  SessionID: 6hj63tlcl14h5jfa8m9dacbmgea1frjsndqc6ta

  AuthProps: AuthSchema = UidPwd | PWD = * | UID = wei | User = wei

  ECID: 6314d6274a0b62d0:3aa2f498:14bec1dc796: - 8000-0000000000048471, 0:1

  ThreadID: 2312

  HttpCommand: go

  In addition, we have already set in configuration in insatanceconfig.xml for report export to excel that has no problem:

  < ResultRowLimit > 300000 < / ResultRowLimit >

  < / ODBC >

  < views >

  < Center >

  <! - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control - >

  < DefaultRowsDisplayedInDelivery > 2500 < / DefaultRowsDisplayedInDelivery >

  <! - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control - >

  < defaultRowsDisplayedInDownload > 200000 < / DefaultRowsDisplayedInDownload >

  <! - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control - >

  < DisableAutoPreview > false < / DisableAutoPreview >

  < > 1920000 MaxCells < / MaxCells >

  < MaxVisibleColumns > 5000 < / MaxVisibleColumns >

  < MaxVisiblePages > 2500 < / MaxVisiblePages >

  < MaxVisibleRows > 500000 < / MaxVisibleRows >

  < MaxVisibleSections > 5000 < / MaxVisibleSections >

  < / Center >

  < table >

  <! - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control - >

  < DefaultRowsDisplayedInDelivery > 2500 < / DefaultRowsDisplayedInDelivery >

  <! - this Configuration setting is managed by Oracle Enterprise Manager Fusion Middleware control - >

  < defaultRowsDisplayedInDownload > 200000 < / DefaultRowsDisplayedInDownload >

  < > 1920000 MaxCells < / MaxCells >

  < MaxVisiblePages > 2500 < / MaxVisiblePages >

  < MaxVisibleRows > 500000 < / MaxVisibleRows >

  < MaxVisibleSections > 5000 < / MaxVisibleSections >

  < /table >

  < cube >

  < CubeMaxRecords > 500000 < / CubeMaxRecords >

  < CubeMaxPopulatedCells > 500000 < / CubeMaxPopulatedCells >

  < / cube >

  < graphics >

  < MaxVisibleColumns > 5000 < / MaxVisibleColumns >

  < MaxVisiblePages > 2500 < / MaxVisiblePages >

  < MaxVisibleRows > 500000 < / MaxVisibleRows >

  < MaxVisibleSections > 5000 < / MaxVisibleSections >

  < JavaHostReadLimitInKB > 10240 < / JavaHostReadLimitInKB >

  < / charts >

  < / views >

  Someone knows if I get bored always something here?

  Thank you

  Check this Doc ID 1567582.1

• Error when running reports

  When I run the 3 reports: Virtual Machine overview capacity general, report on the use of host & host configured capacity report, I get an error. He mistakes against all of the world thanks to the cluster.

  All other reports will work perfectly.

  The problem seems rather limited, but I pulled a discharge of support and went through the newspapers. I see in the ciq.log which corresponds to the time when I run the following report:

  com.vmware.cm.core.manager.impl.DataRetrievalManagerImpl 2012-08-02 12:57:06, 047 + 1000 - time for performance during extraction data = 0.23 seconds

  [pool-1-thread-1] ERROR com.vmware.cm.report.manager.runner.ReportRunner 2012-08-02 12:57:06, 242 + 1000 - run: ReportRunInfo [inventoryObjectReference = IOR - uid = 0 aliveId = 8 = type of group-d0 me = ALL, reportId = 93, reportSettingId = 1, userIdentity = UserIdentity [username = xxx]]
  has an exception when generating reports = java.lang.NullPointerException

  backtrace = java.lang.NullPointerException exception

  Means diddly squat to me and hoping someone here may be able to help?

  I've tried rebooting and using another account but, alas, no cigar. VMware vCenter Operations Manager Enterprise Edition Version 5.0.2 770497 to build running. I was running the previous generation until late last week and was so as well the problem. Unfortunately update does not solve my problem.

  There is a bug that occurs when the reporting period is WEEKLY and you try to run the report at the beginning of the week.

  Similarly, this error can happen when the reporting period is MONTHLY and try to run the report at the beginning of the month.

  I intend to fix in one of the versions vcops.

  For now as a work-around.

  change the calculation of its use to use hourly instead of time which does not trigger this error.

  or try to run the report in mid-week or middle of the month.

  Thank you

• Get strange errors when running reports

  Hello guys
  
  I have a report with 10 columns and I know that this report contains a large valumns of data. So I created the dashboard of the guests on 4 columns, each are certain default...
  
  When you run the report with all of these 4 default values for guests, I get results. When I deselect the value of a command prompt, I always get the result with longer response times, which is understandable... So when I turn off the option a more prompt value and run the report, in other words, when I unfilter 3 prompts and run the report, I get the following error:
  
  [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 46073] Operation 'write()' the file ' / oracle/OBIEEHome/OracleBIData/tmp/nQS_1040510_4_51140737.TMP' failed with the error: (2) no such file or directory. (HY000)
  
  So when I have unfliter all the guests, I get the same error too after a long period of running...
  
  Has anyone here ever encounter this error? My assumption is that maybe the volumn of data is too large for the report to revisit the dashboard?
  
  Any ideas will be greatly appreciated
  
  Thank you

  nQSError: operation 46073 'write()' the file ' / oracle/OBIEEHome/OracleBIData/tmp/nQS_1040510_4_51140737.TMP' failed with the error: (2) no such file or directory. (HY000)

  Basically, it means that the operation of writing to the cache file fails.
  First of all, check if the section [Hide] in your NQSConfig.ini is configured properly (path, size, etc.).
  Then check the weather, the user account running the BI Server service has the right to write in this folder structure.

  If you have doubts as to the amount of data download shot actual queries against the database from the source of logs to see what the resulting dataset looks like.

  Also, try to run a test of caching disabled.

  See you soon,.
  C.

• Error running the report

  Hello
  
  I generated a report from the workspace and it works fine for me. There is another admin who tries to run the report and his throws following error for him:
  
  : 5200 error to run the query.
  
  We have the same privileges to the shared services.
  
  I created this new report.
  
  Just to tell you it worked fine when I created the 1st day for us both and is now error throing.
  
  Thank you!

  Hello

  It allows you to preview the POV for the user before running the report.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• When running scheduled report, receive error message "table or view does not exist.

  This is the first time that we play with the planning reports. We can schedule a report to base without problem, BUT when the report begins to call database packages it starts mistake. We found the package is called end but when it's a SQL query he does not know the scope of the table. For example if the code says "select * of per_all_people_f' he doesn't know what per_all_people_f. BUT if I change the code to specify the owner of the table ' select * from hr.per_all_people_f' then it will run successfully."
  
  In discoverer we have it set up so that a generic user db (DISCO_SCHEDULE) is used when running scheduled reports. I searched metalink and we run scripts of Oracles about this user setting. At this point, we think of creating a group of synonyms for tables of this error, but thought that it had to be a better way.
  
  Anyone have any ideas on how to solve this problem? Their a configuration step we missed when setting up the user db DISCO_SCHEDULE?
  
  Thanks in advance for any assistance received.
  
  Marty

  Hello

  Your problem is that you call the function hr_general.decode_person_name the DISCO_SCHEDULE user and like most HR packages, the package hr_general is defined with the current_user rights. Therefore, the package will use the privileges of the current user when the package is run.

  You can try to grant privileges to the tables to the DISCO_SCHEDULE user and creating the necessary synonyms, but you will struggle to get this working. HR packages refer to other packages and tables, and ensure that you have all the privileges that are put in place will be virtually impossible.

  Another approach is to create a view owned by APPS that makes calls to the hr_general package. You can also create a wrapper function which is owned by APPS and created with the copyright that calls the package hr_general. You can then call this package instead of using hr_general.

  Rod West

• Cannot run the report. Analytics Server Error (1042017): network error

  Hello
  
  I have installed on Linux ODI.
  I start to extract the data of Essbase to Oracle with Hyperion Essbase Data SQL with ReportScript LKM. But after 4 minutes process is stopped with the error:
  com.hyperion.odi.essbase.ODIEssbaseException: cannot run the report. Error (1042017) analytical server: network error: the client or the server timed out while waiting to receive data by using TCP/IP. Check the network connections. Increase the values NetRetryCount or NetDelay in the ESSBASE. CFG file. Update this file on the client and the server. Restart the client, and then try again.
  
  But if I extract some lines process worked well.
  
  I read this forum messages and set NETDELAY = 3600, NETRETRYCOUNT = 1000 in the files:
  
  /Home/EPM/Hyperion/products/Essbase/EssbaseServer/bin/Essbase.cfg
  /Home/EPM/Hyperion/deployments/WebLogic9/servers/HyperionPlanning/webapps/HyperionPlanning/Web-INF/classes/Essbase.properties
  /Home/EPM/Hyperion/common/EssbaseJavaAPI/9.5.0.0/bin/Essbase.properties
  /Home/EPM/Hyperion/products/biplus/appsinfo/WebAnalysis/EssbaseJAPI/bin/Essbase.properties
  /Home/EPM/Hyperion/products/biplus/bin/EssbaseJAPI/bin/Essbase.properties
  /Home/EPM/Hyperion/products/Essbase/APS/bin/Essbase.properties
  /Home/EPM/Hyperion/products/Essbase/EAS/Server/bin/Essbase.properties
  /Home/EPM/Hyperion/products/Essbase/EssbaseStudio/Server/ess_japihome/bin/Essbase.properties
  /Home/EPM/Hyperion/products/Essbase/EssbaseClient/javaapi/bin/Essbase.properties
  /Home/EPM/Hyperion/products/planning/config/Essbase.properties
  /Home/EPM/Hyperion/products/planning/lib/Essbase.properties
  
  But the error occurred.
  
  Help please with this error.

  Well the bug should have been resolved then.
  Your options are to try the V11 essbase japi files, these must be pulled from a facility of V11 or send me an email and I can send you the.
  Or use a different extraction method in the interface.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• FRM-41214: cannot run the report during the call to the reports

  Hi all,

  I work with Forms 10g on Windows 7 (local working with OC4j), I have a form with a button calling a report, it's the code for the button:

  declare

  Repid REPORT_OBJECT;

  v_rep VARCHAR2 (100);

  rep_status VARCHAR2 (20);

  BEGIN

  Rep: = find_report_object ('EMPS_BY_DEPTS');

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_EXECUTION_MODE, batch);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'pdf');

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_SERVER, 'repetat');

  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_OTHER, 'paramform = no');

  v_rep: = RUN_REPORT_OBJECT (repid);

  rep_status: = REPORT_OBJECT_STATUS (v_rep); 

  While rep_status in ('MARKET', 'OPENING_REPORT', 'PENDING')

  LOOP

  rep_status: = report_object_status (v_rep);

  END LOOP;

  IF rep_status = "FINISHED" THEN

  WEB. SHOW_DOCUMENT ('/ reports/rwservlet/getjobid ': substr (v_rep, InStr(v_rep,'_',-1) + 1) |'?) "|' server = repetat","_blank"); "

  ON THE OTHER

  message ("error when running report");

  END IF;

  END;

  
  

  I create a report object in the browser of the object with the name ""EMPS_BY_DEPTS "with properties " filename = emps_by_depts.rdf.

  I also have a server with the command server = repetat wserver report
  

  When I press the button to call the report I get this famous 41214 FRM: cannot run the report.

  I tried running the report with rwservlet: http://acer-pc:8889/reports/rwservlet?report=emps_by_depts.rdf & userid=hr/hr@orcl & desformat = pdf & destype = hide & expiry =...

  and it works very well.

  Any idea and thank you
  

  
  

  I do in this case,

  1 - i run report with parameterform = YES (Note: your report is not a form of parameter), so I can see explanation real error report.

  2 - showjobs of report server options

  We use the 11g r2, for 11g r2 reports this link http://: 9002/reports/rwservlet/showjobs? = RptSvr__asinst_1 server , so I can't see error detail.

  10g should be that this option absolutely. but I don't know.

  These can help you.

  Best regards.